Router is not connecting to the modem so I can't get internet

All right-_ - I tried a lot of things with this so I get irritated sorry. Here is my info I have a Linksys Wireless Router with SpeedBoost Firmware Version 7.2 WRT54GS (latest version). I'm trying to use it with a Sprint 645 series Modem. My IP address when you are connected to the router and the router connected to the Modem is 192.168.1.100 who my ISP said was ok to make it work. While it is just connected to my modem, it's the same thing except replace the 100 by 1. My ISP uses a measure of security where The Thing DHCP is 192.168.1.1 and so is the DNS server and default gateway and im not sure if this has something to do with it. I used the ping at a command prompt to make sure that I am connected to the router when its plugged up and it is. This is a new router. I have internet with Modem just perfectly. I tried to reset the router and that does not work-_-. I don't think it is important more because I tried to fix the many way people have told me and it didn't work, but I'll tell u in any case. When I put up the first router time I hung and lit everything at the beginning. Then I noticed that it says Run CD before to connect the cables... those who were not in the instructions but wtv... anyway resetting should have fixed or so I was told by other people on this forum. I use a laptop with Windows Vista, and I don't have access to a desktop computer in case I need a XD. I can connect to the router fine because I can access the Setup page... and I can connect wireless... The ONLY problem seems to be that the router will not connect to the Modem... for some reason of wtv-_ - I think that its because the entire security measure on the way to the DHCP and the DSN and the bridge are all 192.168.1.1, but that's just me. I'm sorry this is very long but I really want this problem-_ - I had this router for a month and becomes really annoying so please help . My ISP is Embarq. I ran the installation CD and I had all through the last step (standby router) after having connected the power supply to the wall for the router. Just, it is there forever and then says "error: 322 cannot find router or something like that." There are 3 steps to try to fix it. It says to make sure that the router is connected (it is), it is said also to make sure that u does not actually connect your old router, (I don't have a-_-) and then re-run Setup. and by the installer, I mean where u plug in all the cables in the right way. * sigh *.

If you need anything else please ask.

Your second post says "" ignore this "so I guess everyone thought that you set..."

When you connect through your router that you have two instances of DHCP past... one is your DSL modem with router IP address on its WAN interface. The other is the router that gives your computer an IP address via the DHCP server on the router. The IP address of the modem gives your router is in the 192.168.1.0 network. Unfortunately, by default, the reange of Linksys routers LAN IP address is also in this range. For that to work, you must set your router 192.168.2.1 LAN ip, so that the LAN and WAN router interfaces are in different networks.

To do this, unplug the DSL modem router, power it and your computer, and then connect the computer to the router by an ethernet cable. Turn on the router and the computer, and then go to 192.168.1.1. Change the LAN IP on router 192.168.2.1, save the configuration, and then restart the computer. Once the computer returns to the top, navigate to 192.168.2.1... you should be able to get to the router GUI configuration.

Turn off the router and the DSL modem, connect the router to the modem via the Internet port using an ethernet cable, and then turn on the modem, then the router... you should be good to go...

Tags: Linksys Routers

Similar Questions

I have IE6. I need to install service pack 1 Windows XP. I can download it, but I can't install it because it does not connect to the server. How can I work around this problem?

I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?

Hi wildcar

You can go directly to Windows XP SP3 . Download and install it from the link below.

Windows XP SP3.

http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

Ignore the text that says: it is only intended for Professional computer and network facilities.

Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.

Update for Windows XP (KB953356)

http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

After you are done you can try to install ie8 again, if it has not already been offered through windows update.

Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

Original title: Windows 8 store does not.

Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

Hello

This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

I would suggest trying the following steps and check if it helps.

Method 1:

Make sure that your PC is up to date

Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

Method 2:

Run 'Windows Apps Store' convenience store

You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

Method 3:

I suggest you delete the Windows Store cache and check how it works.
1. Press Windows + R logo
2. Type wsreset.exe in the run window, and then press ENTER.
Method 4:

Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

Can drag you across the message in the Outbox overview to get the Red delete button? It's been a while since I had paste an email in the Outbox, so I don't remember if that's possible.

IF your account is an IMAP account, try to delete the e-mail on the Mac. Actions sync between devices in IMAP email, so they should be in the Outbox on the server and you should be able to get to them in the Mail from Mac application, use you it, or in a web browser on the server.

IF this is not possible for some reason, try the mail application to the phone reboots and the closing force force the phone and then try again. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Blow up the Swipe on application brief mail app to close

To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

gay

Router is not connecting to the new cable modem

Time Warner has replaced my cable modem with a Motorola SBV1521 and my Linksys BEFSR81 router cannot connect to it. No lights for the WAN port when the modem is connected. I have tried everything what Linksys said in their "set up a Linksys router with cable Internet Service" including the upgrade of the firmware and pwer cycling. (I can connect to the modem when it is plugged into a LAN port, but not when it is plugged into the WAN port as it should). Any ideas?

As a last resort, I swapped the two cables (one of the modem router and the other between the router and the main computer). It worked!

Do not know why. The two are category 5 cables and the original path was working with the previous modem.

I would be interested if anyone can explain this to me.

Installation of Windows 7 does not connect to the modem broadband.

I installed characteristic of two different versions of Win 7 64 on my desktop at different times.

The two does not connect to my modem. I get error 651. I've tried everything.

I have consulted my ISP, checked the provider. The installer works fine with other OS and Win 7 on another computer.

My office tells me that there is no driver installed. There is no driver to install.

I need a connection to the firmware in the modem to work, something that seems missing from Win 7 Home Premium 64.

Your background of catch-22

LCW

See this previous post/answer

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-651-in-Windows-7/65077414-15f8-450b-BD19-5cce9a57fcf0

PS after I clean installed did you get your motherboard manufacturer system drivers, if a generic desktop computer, or if from a major manufacturer, for example Dell/HP support site?

N300 EX2700 does not connect with the modem

Trying to install EX2700 N300 range extender, but the link never seeing device, not with modem connection. I even hung it with cables ethernet right now, and it still does not connect. Any suggestions?

No, he didn't. But a few days later, a wi - fi network "Netgear_ext" appeared in my ads. I started playing with it, then I could access the Web activation page. I still don't know how I did it, but eventually it worked, and he has now set up and solved my lack of power of the signal of the TV farthest from the router.

Router is not connecting to the internet.

I can connect to my router both wired and wireless, but the router is not the internet. I use a cable modem with Comcast as my ISP. When I plug the cable modem directly into my PC (as I do to post this message) I access the internet without problem. When I plug the cable on my router, I can't connect to the internet. With my Wired internet router and my PC wire3lessly connected to my router, here is the result of my diagnosis:

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\sgray>ipconfig/all

Windows IP configuration

Name of the host...: owner-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: hsd1.co.comcast.net.

Wireless Network Connection 2 wireless LAN adapter:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Virtual WiFi Miniport adapt
Physical address.... : 00-24-D2-DF-9E-8A
DHCP active...: Yes
Autoconfiguration enabled...: Yes

Wireless network connection Wireless LAN adapter:

The connection-specific DNS suffix. : hsd1.co.comcast.net.
Description...: Realtek RTL8191SE Wireless LAN 802.11n PC
I E NIC
Physical address.... : 00-24-D2-DF-9E-8A
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::1c34:caaf:2ec6:9ce5% 12 (Preferred)
IPv4 address: 192.168.1.101 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Saturday, February 27, 2010 13:48:05
End of the lease...: Sunday, February 28, 2010 16:40:03
... Default gateway. : 192.168.1.1.
DHCP server...: 192.168.1.1.
DHCPv6 IOOKING...: 301999314
DHCPv6 DUID customer...: 00-01-00-01-12-46-23-69-00-1E-33-F7-75-1D

DNS servers...: 68.87.85.102
68.87.69.150
NetBIOS over TCP/IP...: enabled

Ethernet connection to the Local network card:

The connection-specific DNS suffix. : hsd1.co.comcast.net.
Description...: Realtek PCIe FE Family Controller
Physical address.... : 00-1E-33-F7-75-1D
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::b456:a41f:9a6e:4fc0% 11 (Preferred)
IPv4 address...: 75.71.12.18 (Preferred)
... Subnet mask: 255.255.254.0.
Lease obtained...: Saturday, 27 February 2010 16:40:07
End of the lease...: Saturday, February 27, 2010 17:40:07
... Default gateway. : 75.71.12.1.
DHCP server...: 68.87.66.13
DHCPv6 IOOKING...: 234888755
DHCPv6 DUID customer...: 00-01-00-01-12-46-23-69-00-1E-33-F7-75-1D

DNS servers...: 68.87.85.102
68.87.69.150
NetBIOS over TCP/IP...: enabled

Tunnel adapter isatap.hsd1.co.comcast.net. :

State of the media...: Media disconnected
The connection-specific DNS suffix. : hsd1.co.comcast.net.
... Description: Adapter Microsoft ISATAP #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Card tunnel Teredo Tunneling Pseudo-Interface:

The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2001:0:4137:9e74:4 b 6: 1f96:b4b8:f3ed (preferred
EXEs)
Address IPv6 local link...: fe80::4b6:1f96:b4b8:f3ed % 13 (Preferred)
... Default gateway. :
NetBIOS over TCP/IP...: disabled

Tunnel adapter isatap. {34ACF225-4239-4274-989A-C35F258144E9}:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #3
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Card adapt 6TO4 tunnel:

The connection-specific DNS suffix. : hsd1.co.comcast.net.
... Description: Microsoft 6to4 card
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2002:4 47 b: c12:4 b 47: c12 (Preferred)
... Default gateway. : 2002:c058:6301:c058:6301
DNS servers...: 68.87.85.102
68.87.69.150
NetBIOS over TCP/IP...: disabled

C:\Users\sgray>ipconfig/all

Windows IP configuration

Name of the host...: owner-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: hsd1.co.comcast.net.

Wireless Network Connection 2 wireless LAN adapter:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Virtual WiFi Miniport adapt
Physical address.... : 00-24-D2-DF-9E-8A
DHCP active...: Yes
Autoconfiguration enabled...: Yes

Wireless network connection Wireless LAN adapter:

The connection-specific DNS suffix. : hsd1.co.comcast.net.
Description...: Realtek RTL8191SE Wireless LAN 802.11n PC
I E NIC
Physical address.... : 00-24-D2-DF-9E-8A
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::1c34:caaf:2ec6:9ce5% 12 (Preferred)
IPv4 address: 192.168.1.101 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Saturday, February 27, 2010 13:48:05
End of the lease...: Sunday, February 28, 2010 16:40:03
... Default gateway. : 192.168.1.1.
DHCP server...: 192.168.1.1.
DHCPv6 IOOKING...: 301999314
DHCPv6 DUID customer...: 00-01-00-01-12-46-23-69-00-1E-33-F7-75-1D

DNS servers...: 68.87.85.102
68.87.69.150
NetBIOS over TCP/IP...: enabled

Ethernet connection to the Local network card:

State of the media...: Media disconnected
The connection-specific DNS suffix. : hsd1.co.comcast.net.
Description...: Realtek PCIe FE Family Controller
Physical address.... : 00-1E-33-F7-75-1D
DHCP active...: Yes
Autoconfiguration enabled...: Yes

Tunnel adapter isatap.hsd1.co.comcast.net. :

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #2
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Card tunnel Teredo Tunneling Pseudo-Interface:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Tunnel adapter isatap. {34ACF225-4239-4274-989A-C35F258144E9}:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Adapter Microsoft ISATAP #3
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

C:\Users\sgray
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\sgray>ping 192.168.1.1

Ping 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes = 32 time = 3ms TTL = 64
Reply from 192.168.1.1: bytes = 32 time = 1ms TTL = 64
Reply from 192.168.1.1: bytes = 32 time = 2ms TTL = 64
Reply from 192.168.1.1: bytes = 32 time = 1ms TTL = 64

Ping statistics for 192.168.1.1:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 3ms, average = 1ms

C:\Users\sgray
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\sgray>ARP - a

Interface: 192.168.1.101 - 0xc
Internet address physical address type
192.168.1.1 00-16-b6-3f-57-5a dynamic
192.168.1.105 00-25-b3-9f-a1-cb Dynamics
192.168.1.255 ff-ff-ff-ff-ff-ff static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.252 01-00-5e-00-00-fc static
224.0.1.60 01-00-5e-00-01-3c static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static

C:\Users\sgray>Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\sgray>netsh int ip show dns

Configuration for interface 'Wireless Network Connection 2'
DNS servers configured through DHCP: None
Register with what suffix: elementary school only

Configuration for interface "wireless network connection".
DNS servers configured through DHCP: 68.87.85.102
68.87.69.150
Register with what suffix: elementary school only

Configuration for interface "connection to the Local network.
DNS servers configured through DHCP: 68.87.85.102
68.87.69.150
Register with what suffix: elementary school only

Configuration for interface "Loopback Pseudo-Interface 1"
Statically configured DNS servers: no
Register with what suffix: elementary school only

C:\Users\sgray>Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

Can you tell me what I've misconfigured?

Thank you!

Well problem solved! Poster on this forum, and after receiving no help, I went to my local Best Buy and asked them to recommend a router that wasn't a Linksys. I came home, plugged in my new Netgear Wireless-N-300 router, ran the installer and poof! -I'm on the internet. Linksys thanks for forcing me to buy a better router.

Router is not connecting to the computer

I just replaced a bad on my computer's ethernet jack. Now when I plug the router in there I don't get everything internet. The router has internet and my laptop wireless connects fine via the wireless signal... I replaced the power cord from the router to the computer with a brand new, only one I know works. Still no internet. When I look at the network settings, the computer says that it is connected to the router. But no internet signal. I also plugged the network directly into the computer and it works fine. The ethernet jack is working. Any suggestions? I don't have the book and cd for the router...

Mike

Perform the following steps:

# Open the browser and in the address bar type 192.168.1.1 which will open the router configuration page.

# Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router).

# Click on wireless tab select width of the channel to 20 MHz only and channel 6, 9 and 11.

Settings wireless #Adjust the following:

~ ~ Reduced from 100 to 75 beacon interval

~ ~ Lower the threshold of fragmentation of 2346 to 2306

~ ~ Lower 2347 to 2304 RTS threshold

Then check the wireless...

G70 213EM Windows 7 Fax does not connect to the modem

"Hi, my G70 213EM let me use Windows 7 Fax, when I try to send a fax, it tries to detect the modem (HDAUDIO Soft Data Fax Modem with SmartCP) and reportsan error occurred - try the operation later or contact your system administrator '. He has worked with the release candidate, but not now with Windows 7 Home Premium full version.

I questioned the modem via Device Manager and obviously only the fault I can see is a line in the newspaper that says ' DSR is low during the initialization of the modem. Verify the modem is turned on ' , but it responds after that? very strange.

12-01-2009 09:34:12.373 - File: C:\Windows\system32\tapisrv.dll, Version 6.1.7600
12-01-2009 09:34:12.389 - File: C:\Windows\system32\unimdm.tsp, Version 6.1.7600
12-01-2009 09:34:12.389 - File: C:\Windows\system32\unimdmat.dll, Version 6.1.7600
12-01-2009 09:34:12.389 - File: C:\Windows\system32\uniplat.dll, Version 6.1.7600
12-01-2009 09:34:12.404 - File: C:\Windows\system32\drivers\modem.sys, Version 6.1.7600
12-01-2009 09:34:12.404 - File: C:\Windows\system32\modemui.dll, Version 6.1.7600
12-01-2009 09:34:12.404 - File: C:\Windows\system32\mdminst.dll, Version 6.1.7600
12-01-2009 09:34:12.404 - Modem type: HDAUDIO Soft Data Fax Modem with SmartCP
12-01-2009 09:34:12.404 - Modem inf path: oem3.inf
12-01-2009 09:34:12.404 - Modem inf section: ModemX
12-01-2009 09:34:12.404 - Matching hardware ID: hdaudio\func_02&ven_14f1&dev_5051&subsys_103c360b
12-01-2009 09:34:12.600 - 115200,8,N,1, ctsfl=1, rtsctl=2
12-01-2009 09:34:12.600 - Initializing modem.
12-01-2009 09:34:12.600 - DSR is low while initializing the modem. Verify modem is turned on.
12-01-2009 09:34:12.610 - Send: AT
12-01-2009 09:34:12.611 - Recv: OK
12-01-2009 09:34:12.611 - Interpreted response: OK
12-01-2009 09:34:12.621 - Send: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W2
12-01-2009 09:34:12.623 - Recv: OK
12-01-2009 09:34:12.623 - Interpreted response: OK
12-01-2009 09:34:12.633 - Send: ATS7=60S30=0L2M1+ES=3,0,2;+DS=3;+DS44=3;+IFC=2,2;X4
12-01-2009 09:34:12.634 - Recv: OK
12-01-2009 09:34:12.634 - Interpreted response: OK
12-01-2009 09:34:12.635 - Session Statistics:
12-01-2009 09:34:12.635 -                Reads : 18 bytes
12-01-2009 09:34:12.635 -                Writes: 94 bytes
ATQ0V1E0 - OK
AT+GMM - +GMM: HDAUDIO Soft Data Fax Modem with SmartCP
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI: B4
AT+GCI=? - +GCI: (00,01,02,03,04,05,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,13,14,15,16,19,1A,1B,1C,1D,1E,1F,20,21,22,23,24,25,26,27,28,29,2A,2B,2C,2D,2E,2F,30,31,32,33,34,35,36,37,38,39,3A,3B,3C,3D,3E,40,41,42,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,54,55,56,57,58,59,5A,5B,5C,5E,5F,60,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,92,93,94,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C1,C2,C3,C4,C5,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F7,F8,F9,FA,FB,FC,FE)
ATI1 - 255
ATI2 - OK
ATI3 - SoftK56V_B2.1_V7.80.4.50
ATI4 - HDAUDIO Soft Data Fax Modem with SmartCP
ATI5 - 180
ATI6 - SoftK56
       CModem Version 12
       Rksample Version 342
ATI7 - 255

I hope someone can help?

Re-installation of Windows 7 Home Premium 64-bit and let it update seem to have solved this problem, don't know why?

Thanks for your help anyway.

Shift of the computer; It seems that my laptop is lagging when it is connected to the power supply (AC adapter) and it works perfectly fine when it is NOT connected to the power adapter. Can someone help or diagnose the problem?

This shift of computer thing had never happened before until about a week ago. The shift comes every 30 seconds or more and it occurs also when I switch between applications.

Hello

I saw this kinds of problems occur with the power strips and even UPS systems. And some similar questions have
been solved using them actually, especially the UPS. If the power strip has important circuit protection
He'll probably bad or you have very low power at first on this AC circuit.

Solution is not to use the tape and maybe get a UPS with brown-out solution.

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

XP is connected to the wireless network but can't get online...

I have a wireless network that works very well with my computer laptop and desktop so its punt in Mac OS, but when I boot XP, it cannot get online. He sees the network and says I'm connected but IE and Firefox keep the display of error messages telling me that they can't connect. If I click on the icon of repair under wireless network connection settings, it would loop forever in the IP address area you are looking for. I figured out how to manually enter the IP address and the error is now in the clearing the DNS cache.

I also tried implementing the wizzards and messed with the different service settings, but still no luck.

Does anyone have an idea what I am doing wrong or what needs to be done to get this connected to the internet?

Why windows is so difficult? my Mac is hooked up very well with little effort.

I'm so frustrated. Help, please

If you are connected your computer must be able to connect to the menus wireless router and have an IP address valid (169 . xx.xx.xx isn't a valid IP address).

http://www.ezlan.NET/example/lan_details.jpg

-------------------

Maybe this can help, http://www.ezlan.net/wireless.html

Also make sure that the security software on your system does not block the connection.

Jack-MVP Windows Networking. WWW.EZLAN.NET

All the songs I have in my media player have been moved to a file different windows media, they do not appear in the media player, how can I get them back?

My windows media player has my collection of music in it, and then one day on a month, none of the songs were in windows media player. I then looked in my documents, under 'My music' and he registered all my songs in the library, but will not be displayed in media player. How can I get back them?

Hello

1. what version of Windows Media player you have installed?

2. don't you make changes on the computer before this problem?

If you use Windows Media Player 11, you can follow this link & check if the problem persists.

You cannot view, add, or delete items in the library of Windows Media Player 11

Hope the helps of information.
Please post back and we do know.

SRP526W router is not connecting to the ADSL.

Help please,

I bought a Cisco Small business Pro SRP 526W modem/router for use in the United Kingdom on ADSL.

Connection and set-up, the unit does not recognize all adsl service. I checked that the LAN interface is enabled.

The ADSL status shows DSL and DSL Status Idle mode of modulation NO FORMS, and unlike any other ADSL device I used, does not retry the connection. All other routers ADSL modem connected to this work of line ok.

I presume that the unit was defective, but thought I check the firmware version and update it because it is a model of new (ish).

The device status screen is fixed and the firmware version 1.01.01 (006) January 22, 2010

A newer version is available and I downloaded it. After combing through the extensive documentation, check the Cisco website and each screen of the device to the search I can't find how to upgrade the firmware.

I know that this is aid refers to it.

Can someone tell me;

1. is this good normal UK ADSL device.

2. where is the option to upgrade the firmware.

3. in the event that I RMA because it clearly is in brick.

4 why Cisco would put their name to such a poorly documented system

Any response would be appreciated.

Hello

SRP526 takes support ADSL2 + on carriers of ISDN. In the United Kingdom, ISDN on POTS lines (telephone analog) is used exclusively. To do this, need you the SRP527W.

Documentation for the SRP500 is published on Cisco.com at http://www.cisco.com/en/US/products/ps10500/tsd_products_support_series_home.html. The Administrator's Guide should provide you with the information you need.

For your information, upgrade code on this unit, you must log in as "admin" default password "admin" (like you), rather than using the "cisco" basic user login, then select Administration > Firmware Upgrade.

Hope this helps,

Andy

Router is not connecting to the modem so I can't get internet

Similar Questions

Maybe you are looking for