Router WRT320N to a wired BEFSX41 router connection problem

Similar Questions

• Modem router connection problems

  Hi all

  I am replacing a belkin n600 with router linksys ea6350 router. The modem I have is a Motorola Surfboard SB6141. The belkin router connects perfectly to the modem, but when I try to connect the linksys router to the modem, the light on the router keeps blinking and will never get me connected to the internet. I even tried to connect the linksys router to the router belink when the belkin is connected to the modem. I still don't get any kind of service. Thought it was a bad router and it took for my current home to connect to my modem At & t and it worked very well and I was able to put everything in place. For some reason I don't know why the linksys connects very well with the modem at & t, but not the motorla modem and the ISP that I have in my apartment is Comcast. It does not any sense and I'm heading home in a few days and I really need this connected linksys router belkin router is just too slow. Please I need much help getting this linksys router to communicate correctly with the motorola modem. Also, I used both crossover and straight cable modem to see if that makes a difference and does none of this and I know use cross to connect to the router.

  first of all, make sure that the port on your pc is enabled.  usually, if you enable wifi it disables the ethernet port.  before you turn off the modem and do a factory reset on the router into the RED reset button until the lights on the router are flashing.  Turn the power off and wait 10 seconds then plug it back.  During its initialization connect a straight cable between the pc and the router's lan port.  Also, connect a cat5e or cat6 from the wan port on the router to the modem.  wait until the router finishes starting, and if she opens a browser in itself and then open a browser (ie to try) and put 192.168.1.1 in the address bar.  You should get a connection.  Let the empty user and enter "admin" for the password.  Or if it opens the programme of assistance to load the router you can follow if you wish.  This should get you.

• E3000 router connection problem when I use the telphone

  I plugged my router through my telphone line. When I use my telphone, I can't connect my computer to my router. When I see the available wi - fi networks available, my router does not see. As soon as I get off my phone, I can see my router and able to connect. I thought that my router has two bands and I'll be able to use it. I'm not a geek.

  Help, please. Thank you

  Why is your router connected to the phone line?

  It must be connected to a DSL Modem or a Cable Modem (assuming that the release for consumption).

  Need information in order to determine the question.

  Is your wireless phone a DECT 6.0, 2.4 GHz or 5 GHz?

  I changed my DECT 6.0 wireless phone because they do not interfere with wireless 2.4 GHz or 5 GHz. older phones use the same frequency as the network and can interfere.

  Why so your router on a telephone line?

  How often your mobile phone works on?

• Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

  NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

  A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

  Anyone has the same problem?

  After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

• New router connection problems

  So I just got a new router delivered to my cause of House, that we had to move to a new location, and that we have obtained will not let me connect to the internet via a modem-> router-> computer.  It works very well when connecting with the computer of my brother through wireless. When wired to the router I get full connected via the internet and so on, but when it comes to my computer wireless router, do not let me go beyond "local only". He remains as unidentified network and can't get more than that.  Ive tried to restore my computer to Service Pack 1 and remove Norton from my computer with the removal tool and nothing seems to work. Ive changed my setting of the router mode 50MBPS and stuff and nothing, defining the network IP and DNS in my Protocol which is in my router and that did not work either, my IP address restarts and refreshing, nope. Im running Windows Vista Home Basic with an Atheros AR5007 802 network card. 11b / g. router Netgear WNR1000v2.  I had a problem with my computer with my last router.

  It's my connection information:

  Microsoft Windows [Version 6.0.6001]

  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  
  

  C:\Users\***>ipconfig/all

  
  

  Windows IP configuration

  
  

  Name of the host...: *-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  
  

  Wireless network connection Wireless LAN adapter:

  
  

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-24-2B-C8-1A-21

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  
  

  Ethernet connection to the Local network card:

  
  

  The connection-specific DNS suffix. :

  Description...: Realtek RTL8102E Family PCI - E Fast Ethern

  and NIC (NDIS 6.0)

  Physical address.... : 00-1F-16-70-E0-A5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::a85c:6ec9:2 has 4: bbf5% 10 (Preferred)

  IPv4 address: 192.168.1.4 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Monday, November 29, 2010 14:29:05

  End of the lease...: Tuesday, November 30, 2010 14:29:05

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  
  

  Card tunnel Local Area Connection * 6:

  
  

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {E418D763-0DB4-4DCA - B 9, 70 - E94D132E8}

  62 A}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  
  

  Card tunnel Local Area Connection * 7:

  
  

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {F2AFB4E5-A1E8 - 415 B-A7B3-A433B3227}

  715}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  
  

  Card tunnel Local Area Connection * 11:

  
  

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

   

  Any help would be appreciated.

  
  

  Well, I tried everything you listed on here and nothing seemed to work. I found a good solution to change my WEP security and he recognized her. Looks like it has problems with the other encryption security. Thanks for your help though!

• Factory reset wireless router connection problems?

  Hello

  I recently did a factory reset on my HP6745f desktop running Win7 sp1 and I don't know if my problem is with HP or Linksys/Cisco (my router). I already contacted the support Cisco who reported the problem seems to be "a matter of HP, a corrupt driver or other third-party issue" and then offered to help, for a price. I'm hoping to avoid that if possible.

  This office computer is directly connected to the router via an Ethernet cable. Cisco software was that I want to install that 'control' of my router (called Cisco Connect) and when I try to install the software, I get a message saying: "We could not find your router" (that's why the software will not install) - although I am accessing internet through that router. Even if I try to enter my network name and the password, it cannot find anything. I am also unable to access the router via my browser "168.198.1.1".

  I am unable to connect wireless with the same desktop so, my 2 wireless laptops have no problem of connection at all, which leads me to believe it's something specific to my desktop pc.

  The Cisco Connect software has already been installed on my desktop and it worked fine. I guess my question is: someone has any suggestions for me? This could be a driver problem? How can I identify what (s) for 'check '?

  Any help would be greatly appreciated.

  I thought about it! My router can use a "network key" to connect other computers to the router. I guess when I reset my pc all this info has been removed and the router could not communicate.

  I have just created a network key on a flashdrive USB of my laptop, plugged the USB in my office and hop, I reconnected properly. Thanks for the suggestions, I really appreciate the help.

• Router connection problems

  Hello
  So I'm having a problem, very frustrating to connect to my router. I can't connect to my router using the ip or routerlogin.net address after a certain period of time. If I restart my router, I can connect without any problems, do everything that I do and everything is fine, but it seems that after a while, can I connect my router delay and then I go to the page... I get a "This Page is not available" in Chrome.

  I tested with Chrome, Firefox Safari (on Mac and PC, 2.4 and 5 ghz connection, as well as directly connected to the router). I also tried the same settings on an IBM computer, including using IE

  Internet seems to work very well, (I can even ping the default gateway), but whenever I create a new virtual machine on my test server, I need to assign a static IP address and need to connect and hate that I have to keep rebooting my router must.

  Y at - it a setting or something escapes me?
  Thanks in advance for any help.

  Hi Andy -.

  Hard reset seems to have worked. Thank you!

  For the curious:

  The first thing that happened the router would be looking for another router on the network. Have not found an and proceeded to reset the router to factory specifications.

  Once that came, I restored my previous settings that I saved while I still had access to the router.

  Always curious, he has established for the last month when I tested my olde 3700 (who, by the way, works fine behind a router AT & T in my other House - and a lot more range and speed than the AT & T.)

  -Chuck

• Need WRT300N wired configurations to connect to another router

  Hello

  I have a Thompson router connected to the Internet.

  One of the 4 ethernet ports on the Tomphson router is connected via ethernet cable to my wrt300n uses the Internet port.

  Attached to the WRT300N ethernet ports is a desktop computer and a laptop computer. Both devices have access to the internet with this configuration.

  I had to reset the WRT300n, but now I can't connect to the Thompson router. First they when connected, I noticed he had to communicate certain configurations on the WRT300N in order to both routers, and provide Internet access to equipment connect the WRT300n.

  Can someone remember, the configurations I need to do in the WRT300n?

  Thanks in advance

  Ayala

  Lisbon, Portugal

  Fact!

  Thanks again!

  concerning

  Ayala

  Lisbon, Portugal

• If I have 2 routers when I connect 2 LAN to LAN or WAN router connection LAN router?

  If I have 2 routers when I connect 2 LAN to LAN or WAN router connection LAN router?

  Hello

  It suits better the question you have posted on the MSDN forums. Please ask your question in the following forum.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope this information is useful.

• Nook Color ereader & connectivity problems with router WRT610N

  I recently bought a new Nook color ereader for my wife. As long as a network administrator, I thought that this would be an easy task to configure the ereader to connect with my Linksys WRT610N router on the 2.4 Ghz band. But I'm running problems when connecting. The question seems to have intermittent connection problems where the meals seem to see the wireless network, authenicates, tries to get an IP address, then connects for a short period or removes the signal very quickly while being right on top of the router with the device.

  By the recommendations of various forums of Nook, I had the best luck with the following...

  2.4 Ghz band settings

  SSID: NookNetwork

  Channel width: 20 GHZ

  Standard channel: 9

  SSID Broadcast: enabled

  Security mode: WPA2 Personal

  Encryption: AES

  Passphrase: set out

  Key renewal: 3600

  UPNP: disabled

  RTS: default

  Defragmentation: default

  Tag: default

  However, the problem still resides in an intermittent connection to the wireless network. I also tried various arrangements of the channel to both channels 1, 6 and 11 with my best cponnecting chance to channel 9. I also played with the security and disabled all together and have plugged but always file (will not however run the unsecured network). Also try a tag value of 75, a framework of fragmentation of 2306 and 2307 RTS setting. My computer laptop while run and connect properly.

  I use the latest software updated both on the color of the corner. I am at the end and have searched high and low to get suggestions, and have not yet reached a compatible connection. Please help... Thank you! And my wife thank you in advance! Smiles!

  Mike

  Hi death,

  Thanks again for your comments and your concerns. Really appreciated!

  I took your advice and contacted Barnes & Noble for a new replacement and am waiting for the reception of the new unit as I type. If all goes well, we have reduced the problem and the replacement ends at our misfortunes... smiles!

  I'll let you know...

  Mike

• Router connection returns to the manual

  My router connection returns to the automatic manual when I shut down or restart. I have a Vostro 1510 running Vista. I put the wireless "connect automatically" in "Manage wireless networks", but for some reason it will not stay set to auto. (it is a sudden and new problem). Should I disable a startup in msconfig program? Could we have an update of antivirus that has created the problem?

  Hello

  Try the steps proposed by Aashish G in this link: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/automatic-connection-to-wireless-network-reverts/31fe76b7-e919-4693-a417-28140bab8415

• "Access: Local only" problem and an unidentified router connection.

  I use a laptop Compaq Presario CQ60 with Windows Vista Home Basic.

  The laptop connects to the router (a Belkin.43A1) However, it is unable to correctly identify the router and does not connect to the internet. Offer me only a "Local" access only

  My brother has the same exact model of the laptop and windows vista edition, with all settings completely unchanged but suffers still from the same connection problem.

  All other devices in the House are able to connect to the internet through the router, such as ipods and game consoles. Another laptop running Windows XP is able to connect without a problem.

  Connecting the laptop to the internet works when connected via an ethernet cable.

  I tried several solutions offered on the internet without any positive results, such as:

  -Disable IPv6

  -Computers wireless card uninstalled, then put it back

  -Uncheck the link layer topology

  -Restart the router/mobile

  -Check and install all updates for windows and HP

  And several others, all parameters have returned to what they once were.

  Help and suggestions or solutions would be greatly appreciated thanks.

  Hello

  It could be set-match security, log in to the router wireless security turned off and see if you can connect

  If it works, restore security.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• No Internet access - network/router wireless connection problem

  I can't connect to the internet after installing Windows 7 64 bit. I can see the router wireless/network from my computer, but it has sometimes limited connectivity or it says connected but no internet access. I used Windows diagnostic tools to try to fix it but it does not work, and my router connects without a doubt to the internet such that I now use on a portable computer that is on the same network. I would like to know if anyone else has this problem and if they fixed. I tried to change the physical address of the connection to the local network, but it didn't work, I guess because I connect via radio and no cable, and I heard similar stories on other forums that this can be a problem more common I suspect. Thanks in advance for your answer, and all the details you need I'll try my best to provide.

  OK I finally got to work, all we needed was for me to download the latest drivers (Realtek 8185 wireless card) off-site and install in compatibility mode, and then he worked all of a sudden. I hope this will help someone suffering from a similar problem!

• How are routed connections Wi - Fi? They are proxyied by BES or BIS?

  I'm trying to understand how the Wi - Fi connections are routed in Wi - Fi phones BB.

  First of all I am confused that there is an entry in the routing host for WiFi with address/port rcp.na.blackberry.com:443 table. Why is there a blackberry address? I thought that the WiFi was not proxyied through RIM.

  Then I read an article by knowledbase entitled "system requirements and support of Wi - Fi enabled BlackBerry smartphones. There, he says for the WiFi connection, you need
  -Routable path between the smartphone BlackBerry and Internet via TCP/IP Transmission Control Protocol/Internet Protocol () on port 443
  -Routable path of BlackBerry smartphone on the BlackBerry via TCP/IP router on port 4101
  -BlackBerry
  access to smartphone for the DHCP server and the domain name system (DNS) Server

  If this confused even more. Because I told the phone must be able to reach to the BES or the Internet (I assume that it is address of RIM in the table of routing entry host Wi - Fi) wireless.

  Then I read another of the knowledge base article titled 'Services via a Wi - Fi connection' saying 'a network of Wi - Fi enabled BlackBerry smartphone can establish
  a WiFi a personal Wi - Fi, a wireless company network
  network with a virtual private network (VPN) connection or a hotspot with a
  VPN directly to the BlackBerry router connection.
   
  So it says that you need a BlackBerry router VPN connection (I guess that BES) If you are a small business Wi - Fi network.

  Finally, my confusion reached upstairs when I read another article titled 'Direct web browsing' knowledge base which says

  «Direct web browsing allows BlackBerry smartphones»
  with Wi - Fi® technology to navigate the web through hot spots or at home
  Wi - Fi networks you connect to a BlackBerry Enterprise Server or the
  BlackBerry Internet Service»

  That said, that you don't have to join to BES or BIS.

  I'm totally distraught about how Wi - Fi connections are routed.

  Any help is appreciated.

  I got the answer.

  The article 'System Configuration required and the support of Wi - Fi enabled BlackBerry smartphones' refers to the configuration required to use Data Services BlackBerry as BES, MDS, BIS, BB Messenger.

  These aren't the requirements on applications for non - BB data services like 3rd party MI application trying to connect by Wi - Fi.

  If all goes well, it helps to address future confusions.

• WRT320N slows down the speed of connection - terms of support of Linksys problem

  My internet connection speed slows down to about half of it is normal speed (or worse) until I have restart my router WRT320N. I see on the net that MANY other people have the same problem and can't seem to find a solution to this problem.

  I have the latest version of the firmware installed and I have the upnp is off

  I was told recently by a representative of Linksys Chat to perform this procedure, and I was wondering if anyone has tried and there set the coupling apparently daily slowdown that set in a reboot of the router for another day or two

  Here is the procedure that I was instructed to do...
  I was told disconnest the modem to the router-connect "than a PC ONLY" via a wired port #4 - reset the router by holding the button of reset in 30 seconds - switch off the router Linksys for 20 seconds and then turn it back on - check the LEDs of the Linksys router to make sure that the power, WLAN and port #4 are lit on the Linksys router. -clone the MAC - change "Mixed" wireless settings - name - change to 20 Mhz channel bandwidth and network use standard channel 11 - and in - use the Mode personal WPA - security settings and set my WPA pre-shared key password
  Before shutting down the PC and router - reconnect the modem to the router and the PC to the router - then make sure that the modem, the router and the PC are disabled for cycle a minute and the power of their back on with the modem being first - then turn on the router and last the PC

  Has anyone tried this, and he had to fix this downturn?

  Thanks in advance

  Well it's been 6 days that I woke up this morning and turned on the router and the modem from power overnight or lower I did after question troubleshooting the slow speed in the night before, does not

  I consistantly get in the 2 to 3% of the broadband speed I pay for - but I have no idea what fixed the issue

  So I'll mark it as "Resolved" and just hope that it comes not back again

  Thanks for the recommendations Klatch