RPCRemindwe stopped working__RegPowerCleaner has been working___I get the above two errors when I boot up__Vista home premimum SP2

Similar Questions

• I get the msvcr100.d11 error when I try to open Lightroom 4.

  I get the msvcr100.d11 error when I try to open Lightroom 4. What can be done. I tried MS Fixit, it uninstalled and said it fixed the registry, but when I reinstalled LR4 he still gave me the missing erroe of MSV CR100.d11.

  What to do next?

  Thank you

  CAL

  You have Visual C++ 2010 Redistributable Package installed.

  If not, you can download the latest version here: http://www.microsoft.com/download/en/details.aspx?id=26999

• I get the Windows 0xc0000135 error when opening new tabs in Google Chrome. Help!

  I get the Windows 0xc0000135 error when opening new tabs in Google Chrome. Help!

  It gets really annoying. The very first 2 or 3 times I opened a new tab, I get this error message and
  I have to close and open a new one until I get a tab that works. Anyone who can help is greatly appreciated.
  -Eric

  Hi EricKelso,

  The question you have posted is related to Google Chrome and would be better suited to the community of Google chrome. Please visit the link below to find a community that will support what ask you
  http://www.Google.com/support/forum/p/chrome

• Get the 194:6 error when you try to deactivate CS4

  I get an 194:6 error when I am trying to deactivate CS4.

  I can't find anything online to CS4 but found this solution for CC:

  1. close the CC application
  2. go to the support/adobe folder
  3 try to delete the content in the files SLCache and SLStore files

  4 run the CC application
  5. try to connect

  Can I use these same steps or what should I do to turn off?

  Thank you!

  Please contact the Support from Adobe on the Customer Contact

• My laptop cannot start or repair itself, Windows has been installed at the factory, so I have no boot disk, is there a way to get a free boot disk?

  I had problems with my laptop for a few weeks, I used Chkdsk to fix the problem she was having. Yesterday the comp froze while I was using firefox and when I reset windows not load and cannot repair themselves. My OS was installed at the factory, and I have the product key, but Windows no disk. Is there a way to fix my computer without buying another drive in windows?

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  and if you need a startup repair disk;

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• How do you know that a spesific procedure or function has been run by the user who and when?

  
  Hi all

  Suppose I have a procedure or a function whose name is MY_PROC. Is it possible to learn that the user who has been running this procedure and when?

  Thank you

  Hi NightWing,

  You need VERIFICATION for operations.

  11.2 docs: AUDIT

  For example:

  SQL> show parameter audit_trail;
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  audit_trail                          string      DB
  SQL>
  
  SQL> conn iarsov/iarsov
  Connected.
  SQL> create or replace function test_audit
    2  return date
    3  is
    4  begin
    5  return sysdate;
    6  end;
    7  /
  
  Function created.
  
  SQL> conn system
  Enter password:
  Connected.
  
  SQL> audit execute on iarsov.test_audit by access;
  Audit succeeded.
  
  SQL> select os_username,username,obj_name,owner from dba_audit_trail where obj_name = 'TEST_AUDIT';
  no rows selected
  
  SQL> conn iarsov/iarsov
  Connected.
  
  --call the function and trigger audit operation
  SQL> select test_audit from dual;
  TEST_AUDI
  ---------
  04-AUG-14
  
  SQL> conn system
  Enter password:
  Connected.
  
  SQL> select os_username,username,obj_name,owner,timestamp from dba_audit_trail where obj_name = 'TEST_AUDIT';
  
  OS_USERNAME          USERNAME                       OBJ_NAME             OWNER                TIMESTAMP
  -------------------- ------------------------------ -------------------- -------------------- ---------
  oracle               IARSOV                         TEST_AUDIT           IARSOV               04-AUG-14
  

  Kind regards

  Ivica

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I get the message "unspecified error" when I try to restore my PC. can anyone shed a light on this

  I'm trying to restore my PC and get the same message every time, he reads "unknown error" can anyone help please

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• get the kernel 8000FFFF error when windows tries to install the upgrade?

  Windows will be drowning install updates get error code 8000FFFF

  http://support.Microsoft.com/kb/946414

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF

  If the above does not resolve the problem:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the message javascript error when opeing of new window site Exc in handl ev: TypeError: brw is undefined

  When this happens, the new window opens but cannot be closed except using the X in the upper right (there is a link 'close' on the web page that appears to be disabled. When the PC is powered and on the new firefox opens all the same winfdows, which had been closed when stopping down

  Please see the solution in http://kb.mozillazine.org/Problematic_extensions
  "McAfee Site Advisor.

  (Windows): for best results, you need to uninstall McAfee Site Advisor from Control Panel > add/edit programs (programs and features). Restart the system. Then http://www.siteadvisor.com/ reinstalling and reboot the system. Installation of other waste (crapware) suggested applications.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• Get the t6030-c1501 error when try to watch YouTube videos in the sky using Silverlight site

  Originala title; Microsoft Silverlight

  When you try to watch previous episodes of Boardwalk Empire of sky Atlantic HD using Microsoft Silverlight, message arrives, cannot run the episode because of the error (t6030-c1501). Those who know this problem and solution Advisor.

  Hello

  1 did you do changes on the computer before the show?

  2. not the problem only occurs with the Sky or other sites as well?

  3. what browser do you use?

  Sorry to hear that.

  You can get error t6030-c1501 due to settings in Silverlight or corrupted installation.

  I suggest you to visit:

  Go sky - correction of errors in C:1501 - C:1503 and C:16000 - C:16040

  http://helpforum.sky.com/T5/using-Sky-go-knowledge-base/sky-go-fix-C-1501-C-1503-and-C-16000-C-16040-errors/Ta-p/578602

  If the question is limited to the sky, then I also suggest you to post a request in the forum of sky:

  http://helpforum.sky.com/

  I hope this helps. If the problem persists, return and I will be happy to help you.

• Get the missing winsock error when you uninstall AVG 7.5

  I tried to uninstall AVG 7.5 build 510, and at the end of the process, he said that winsock is missing. I've tried resetting winsock and so forth but am unable to get AVG to uninstall

  Hi Z26mann,
   
  Visit the manufacturer website and download the removal for the product tool and then uninstall AVG completely.
   
  For more information, contact The Forums of Support AVG.

• Get the Internet script error when Internet Explorer is closed

  get internet script error, even when internet Explorer is closed. its Web site also comes in my speakers when no one is around the computer? Everyone please help my os is xp home edition

  First thing I would do is to restart the system and download MSE and install if you don't the have not already installed. Update and run. Download of Malware bytes and install and run this update from.

  Then, you can run chkdsk from the command prompt. Type chkdsk /f at the prompt and press on enter then type y to run check disk on the next reboot. Exit command prompt and restart the system to allow running chkdsk.

  Let us know if that fixes it or what the results were.

  Hope this helps,

  JB

• I get the message "unspecified error" when you try to create a system restore point

  That this is an autofocus of startoff a I have create, fSystem restoration returns with 'unspecified error', he never worked on my laptop.

  Can anyone help? Thks

  Hi somnop,

  1. What antivirus do you use?

  2. do you get any specific error code?

  Follow the steps below and check, if it helps.

  Step 1:

  Disable all security software and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Do SFC scan and check if the problem is related to corruption in the file system.

  Step 3:

  I know that you cannot create a restore but point as a test, try to do System Restore in safe mode and check if you are able to restore.

  Note: Restart the computer in normal mode after the test.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Get the code 43 error when installing CC Office retina MBP with Yosemite, I tried CC Cleaner, nothing works

  Need to chat or support to install CC trial on retina MBP with Yosemite telephone. Tried everything on your website. Adobe customer service send me here

  If you went through all the controls in the Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications, contact adobe for hourly pst support by clicking here, when available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html