RSRA service stopped

Similar Questions

• Detection of InsightCM Server service stopped

  Hello.

  Is it possible to get some kind of alarm or notification, if the InsightCM Server service stopped running on the server? It is not something I've experienced, but I just got the issue with the customer, so that I am currently working.

  Thank you.

  Hi Jens,

  Unfortunately, there is not a built-in way to be alerted if the service of InsightCM crashes. However, you can use the built in tools of Windows services to run a program if the service crashes. You can set the action in Windows Services by right-clicking on the InsightCM service and selecting Properties and then accessing the Recovery tab. You can then this pointer to any generic EXE. This program, for example, could send users to inform them of the accident.

  

  Let us know if you have any other questions!

  Kind regards

  Kevin K.

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• Exchange Server 2003 Exchange Services stopped working.

  Hello!

  I have a Windows SBS (2003), which is my domain controller and Exchange Server (2003) is installed. Arrived on site this morning only to discover that Outlook was not opening. Check the Small Business Server and it was running. However, most of the Exchange Services stopped running:

  

  I tried to restart the services, but they kept not. I even rebooted a couple of times in hopes that I get lucky but luck was not on my side. Here is the error message and the system logs, I got the failure:

  Windows could not start the Microsoft Exchange Information Store on the Local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 0-specific error code.

  In the system event log:

  Source: Service Control Manager

  Category: None

  The event ID: 7024

  Description: The Microsoft Exchange Information Store service stopped with the error special service 0 (0x0).

  I also have a couple of events in the Application log:

  Source: MSExchangeIS

  Category: general

  The event ID: 5000

  Description: Could not initialize the Microsoft Exchange Information Store service. Failed to initialize security - error 0 x 80004005.

  Source: MSExchangeSA

  Category: Monitoring

  The event ID: 9098

  Description: "The analysis MAD thread was unable to read its configuration from the directory service, error ' 0x8007007e".

  I tried to uninstall and reinstall the SMTP Protocol, but it did not help. I also watched some wires, but they seem not directly related to my question.

  When I tried to start the STMP service, it is to get the error message: failed to start the service SMTP Simple Mail Transfer Protocol () on the Local computer. Error 126: The specified module could not be found.

  It's the system log:

  Source: Service Control Manager

  Category: None

  The event ID: 7023

  Description: SMTP Simple Mail Transfer Protocol () service terminated with the following error: the specified module could not be found.

  The server worked fine the day before and it did nothing for the server that I can recall which will trigger such.

  I have TrendMicro Worry Free Business installed on the server but I also exclusion of files/folders to the Exchange folders / file (s). At this setting for a few years and nothing has changed. No update or something has been done since the last time it was running.

  Although I have included one or two mistakes, I got messages and logs for all services failed.

  Help!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Service stopped with error 4294967292 (0xFFFFFFFC) special service

  I have a service on my windows 2008 Server. Whenever I try to start it, below error I get.

  "service stopped with error 4294967292 (0xFFFFFFFC) special service."

  Hi Alok,

  My apologies for the delay in the answer here.

  The question you asked is in what regards to Windows Server 2008.

  It would be better in the TechNet communities:

  http://social.technet.Microsoft.com/forums/en-us/categories

  Best regards

  Matthew_Ha

• Windows 2003 terminal server print spooler service stops frequently

  Windows 2003 terminal server print spooler service stops frequently

  Hello Vijay Bedre,

  Thanks for your post.  Please ask your question in the forum of Remote Desktop Services TechNet as they manage all the server related issues.

  See you soon

• Help - Tablet Iconia B1 - get messages "Email service stopped because of the weak campaigns"

  Hello

  When switching on my B1 Iconia Tablet I get message "Email service stopped because of the weak campaigns" and "you can delete the unused e-mail or applications to retrieve campaigns."  Also when trying to download a new application, which is not allowing them installed indicating the space of campaigns.

  However, there is much space of campaigns as the shelf a time the built in memory and an extra memory card. Details under settings under campaigns shows:
  Space total 0.98 GB
  Apps (content data & media app) 792 MB

  SD INTERNAL
  12,39 GB total space
  Apps (content data & media app) 332MB
  Photos, video 9.48 MB
  Audio (music, ringtones, podcasts, etc.) 20,00 KB
  Download 7.25 MB
  Available 12,03 GB

  SD EXTERNAL
  29,49 GB total space
  Available 27,00 GB

  As you can see from the above information there are plenty available storage space on the shelf.
  Also I changed nothing with regard to the settings since the Tablet (about 3 months) so it still has factory settings.

  Please can you advice how to fix this problem so that email and download installation restored to the tablet.  I would appreciate it if all instructions to solve the problem can be detailed step by step easy to follow.

  Thank you

  If you go into settings, on the Tablet, which is listed under the device information?

  I think that the main problem you see is that the email app is eager store items in the 'main' part of the files, not the SD card internal or external space.  If you are looking to ~ 200 MB total space, which may be too weak so that it can consider the space of "viable."  (1 GB-800 MB = 200 MB)

  I suggest you move the extra apps, etc. from the main space on the SD storage.

• Wireless printer will not install. Rpet print spooler service stopped.

  Original title: Print Spooler Service.

  I am trying to install a wireless printer, and he goes on to say that the print spooler service stopped stop. How can I fix this problem?

  Hi Gaynell,

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/print-spooler-service-not-working/ca5d0119-927a-e011-9b4b-68b599b31bf5

• Prosess host for Windows Services stopped working and was closed

  A problem with the application to stop functioning properly.

  Hello

  See the solution here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/host-process-for-Windows-services-stopped-working/365fc5fc-5edf-427d-a4d8-859b74b05b7c

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/host-process-for-Windows-services-stopped-working/a2b1b42b-9803-47fb-A120-15358aac5ee3

• Try opening Windows Defender me gives error code: 0x800106ba - a problem caused this program service stop. Help, please.

  Hi all

  I am a newbie with doozy a bit of a problem:

  Services of Windows Defender on my local computer no longer works.  The message I get is:

  «Windows Defender encountered an error: 0x800106ba.» A problem caused this program service stop.  To start the service, restart your computer or search help and Support to find out how to start a service manually. »

  I restarted my computer nothing works.

  I followed the advice from another thread in the following way: go to the control panel > click on Administrative Tools > Services > Windows Defender properties > change initially > press on apply.  It seemed that he would work until the following message appeared:

  "The Windows Defender service on Local computer started and then stopped.  Some services stop automatically if they are not in use by other services or programs. »

  Any help, help, clarity on this issue...?

  Thank you very much! :]

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials or AVG 9 and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running. These security software stop windows Defender work properly in order to prevent conflicts.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Click on apply. Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Errors NT Service stopped working and was closed"and Windows Explorer has stopped working"

  Original title: NT service

  "NT service stopped working and was closed" appears on desktop screen after signing in. In addition, "Windows Explorer has stopped working" appears when trying to access to the "view network status and tasks" or "set up file sharing" in the control panel. However, I am able to access Internet Explorer without problem. What is the problem?

  Hello

  1. you hear that you receive the error at startup after you have signed in to the user account?

  2 have you made any changes to the computer before the show?

  NT Service stopped working and was closed because:

  Method 1: Try to start the Services.msc services and see if that helps, manually.

  (a) click Start, type services.msc and press enter

  (b) search for the following services

  (c) Net.Tcp listner adapter

  (d) the Net.Tcp port sharing

  (e) make sure the status of services started and startup type is automatic.

  (f) click on apply and Ok.

  Method 2: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

  Explorer Windows has stopped working the issue:

  See the following article:

  Important notes:

  ·         You can exclude scan SFC in the following article:

   

  ·         When you have finished diagnostic using the clean boot, follow step 7 article to start on normal startup.

  ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  ·         Before Inplace upgrade, be sure to back up data.

  Error: Windows Explorer has stopped working http://support.microsoft.com/kb/2694911

• the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• "Audio Windows has stopped working" and "host process for windows services stopped working.

  Hello. I recently had to reinstall windows vista on my computer. Everything works well except that I continue to have problems with the audio. When I play youtube videos or to make Skype calls, that the sound disappears and I get the message "Windows Audio has stopped working" immediately followed by the message "host process for windows services stopped working." I remember having this problem in the past, every time that I had to restore the operating system, but I don't remember what I did to remedy. I went to the history of my problem and it's certainly a problem with Windows Audio. What can I do?

  Hello

  1. The problem only affects Skype and Youtube videos?
  2. The sound works fine on the computer in other circumstances?
  3. You reinstall the audio drivers after reinstalling Windows?

  Try the methods provided and see if it helps to solve the problem.

  Method 1:
  Check out the link and follow the steps.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  Method 2:
  You can also visit this link and follow the steps in the article.
  
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Print Spooler service stops still.

  I am facing a very grim situation, because of the Vista PCs always Printer Spooler service stops. After stopping these services all usury priters hidden and I can't add a printer. Aftet I I restart manually from the services but a few seconds it stops. I got this page from Vista PC. Can anynoe help me to overcome this problem?

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• [R] Intel PROSet/Wireless event log Service stopped working. What is c? Please help me.

  What log the events ofIntel PROSet/Wireless Service has stopped working? Please help me.

  Hi Tariq.khan,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I was able to find a link from the Intel site, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

  [R] Intel PROSet/Wireless event log Service stopped working

  http://communities.Intel.com/message/69976

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Let us know if that helps.

• Google reading services stops after update 6.0.1

  After you have installed 6.0.1 why its continually shows unfortunately Google plays services stopped.

  Hi Viralg1,

  This may have been a bad installation. You may need to clear the Google Services to play app.

  Menu > settings > Apps > game Google Services > storage > clear data

  When done let know us how you go.