RSTI cable construction

I can do a RSTI cable in order to link the two boards using two 34 Ribbon connectors and a tablecloth? Or is there something special about the cables that I would buy from OR? i.e. are they one-for-one pines? or is there some non-connected/open?

Christopher

Hi lindope,

You use a NOT provided cable RTSI or a self-construction, you will still need to configure cable max.  The following link shows more information on how to do this:

What is RTSI and how is it configured?

The indication 'Not connected' in the manual is just to tell you that we do not use these lines on our maps.  In fact, we only use 8 of the 34 lines for the delivery of the real signal.  The remaining lines are not connected or are connected to the digital earth.

Best regards

Tags: NI Hardware

Similar Questions

  • Impossible to attach Windows 10 laptop computer to the Internet via cable USB iPhone 5 c after update to iTunes and iPhone (March 2016)

    System information:

    Tactile Lenovo Y50-70

    Construction of 10.0.10586 of Windows 10-10586

    iPhone 5 c - iOS 9.2.1

    iTunes - 12.3.2.35 / 64-bit

    Cell carrier: Etisalat AF

    Last year in Afghanistan, I have used my iPhone 5 c to attach my laptop to the internet simply by connecting via USB.  It has always worked.  Was very simple.  When I returned to the States for R & R in November 2015, I've updated my iPhone and iTunes to the latest versions and upgrades Windows 8.1 to Windows 10.

    I am now back in Afghanistan and USB tethering no longer works.  WiFi tethering works half the time.  The other half of the time, when I try and connect to the network of the iPhone, it is said, you cannot connect to this network.  When I can't connect to the phone, I disable the personal hotspot, WiFi and Bluetooth on the phone and then I turn it back on.  I also turn off my WiFi adapter on my laptop and turn it back on.  Which usually solves the problem and then I can connect via WiFi.

    Do some research on the internet, I read that there was a file corrupted when the current generation of iTunes, but Apple had set and you just need to reinstall the current version, which I did.  I have reinstalled iTunes by suggestions from different site.  After reinstalling iTunes and restart, I can always have my phone to connect to internet via the USB cable.

    I want to be able to connect my laptop to the internet using my phone via the USB cable.  I want it all works just as it did previously.  Connection via WiFi is a pain in the ass, because it does not work half the time and disconnects on a regular basis.

    Please tell us what should I do to solve this problem.

    Thank you.

    OK, I finally understand how to solve this problem.

    I was able to understand because of this post:

    https://discussions.Apple.com/message/29267225#29267225

    The problem is that Windows 10 was not install appropriate drivers for my iPhone.

    You can see 2 places to see.  We're in the control panel.  After you plug in your iPhone, the iPhone will be displayed and highlighted as not having is not a compatible driver.  The other place is in "Devices and printers", there you will see 3 apple devices: 1 Apple Mobile Device USB Driver, iPhone 2, and 3. Apple iPhone.  All three appear when I plugged in my iPhone.

    However, the problem was one that said iPhone really should have said "Apple Mobile Device Ethernet".

    So, how to fix this?

    Open devices and printers-> right click Iphone which should be under "Unscpecified"-> properties-> hardware-> Propterties tab-> change settings-> tab driver-> update driver-> Browse my computer for software Local-> Browse to the directory "C:\Program Files\Common Apple Mobile Device Support".

    Make sure you have the files box to include under verified.

    Who did.  Windows successfully installed the necessary drivers.  Now, I can easily connect to the internet via the USB cable again without any problems.

  • Cable RTSI with PCI 6034 and 6602. Test validation of LabVIEW code.

    Hi all

    Please could someone take a look at my code (LabVIEW 8.5) and tell me if it does what I hope it is? (!)

    My goal:

    To connect to analog to a PCI-6034 and data of angular encoder to a PCI-6602 tensions. I want my tension and angle data to synchronize.

    My approach:

    Both cards are connected with a RTSI cable and configured in MAX. One of the counters on the 6602 is set up like a clock. I think I use this clock to make sure that my angles and tensions are synchronized. I want to read in a load of data from two sources, treat it, and repeat.

    The synchronization set is a little new to me - the code execution, but right now, I'm not sure if I get the sychronisation I need. Please what could someone comment if this sounds right or give me any advice for the improvement?

    Thank you!

    Ian

    Sorry Ian,

    This code was a bit thrown together then you might need to forget it. The table of construction was incorrect, and I don't quite know how it got there.

    The output of the counter in the middle of your task is not doing anything. You can remove this, and as long as you had a single start task depends on the other that you already do and share all the same settings of the clock, which should start the task at the same time and keep it synchronized to readings.

    On top of that my tip for better start synchronization would be to use a hardware trigger to start tasks. the start is so dependent on a hardware clock and not software.

    Kind regards

  • How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

    I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
    Here is my configuration:
    CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
    Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
    Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
    Storage: Intel 330 series 240GB 2.5 "Solid State Disk
    : Fractal Design Arc Mini Micro ATX mini-tower case
    Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
    Optical drive: Lite-On iHAS124-04 DVD/CD burner
    Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
    Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

    And here are two mistakes STOP I was able to capture up to now:
    STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

    STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

    This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

    Original title: how to troubleshoot and resolve problems blue screen for new construction

    Hello

    Bug_Check F4 is generally hard, cables, and associated hard drive controller.

    Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
    both ends where possible) - actually delete and replace - do not just tight. Make sure heat
    sink and compound are correctly placed and that all lovers of work.

    Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
    for problems known.

    ASRock - Support
    http://www.ASRock.com/support/index.asp

    ASRock - Forums
    http://www.ASRock.com/support/forum.asp

    ASRock - downloads
    http://www.ASRock.com/support/download.asp

    =============

    See this article:

    You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
    you try to resume a computer that has a large hard drive SATA.
    http://support.Microsoft.com/kb/977178

    -----------------------------------------------------------------------------------------------------------

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ================================================================

    BCCode: F4 0x000000F4

    Check and reinstall the cards memory and cables (at both ends where possible) in fact
    delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
    memory and possibly check the connection/contacts on the hard drive. Memory could
    be the problem, so if you have more than 1 stick swap them in and out to see if the
    problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
    have been known to cause or have a role in this matter.

    More general patch updates day and low level chipset BIOS drivers and other control
    software.

    Also check the wiring on the hard drive.

    =========================================================

    Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

    CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    CRITICAL_OBJECT_TERMINATION parameters

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    The Terminal object type:

    0x3: Process of

    0x6: Thread

    2

    The endpoint object

    3

    The name of the process image file

    4

    Pointer to a string ASCII containing an explanatory message

    Cause

    Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

    BCCode: F4 0x000000F4<-- read="" this="">
    * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

    ==================================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant
    (also, Windows 7 and Windows 8).
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen
    of death "crashes and displays the information about all crashes in one
    Table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista (also Windows 7) Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Ethernet, says "cable disconnected".

    Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

    Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

  • Apple TV with no cable?

    If I disconnect the cable tv, Apple TV will work?

    No. a HDMI cable is necessary and one internet connection.

  • Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

    I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

    The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

    The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

    Popular Wizard. Thank you.

    You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

    (145067)

  • do not connect not lightning cable

    All cable brightening, Apple or others, I use to connect to my iPhone 6, I have to move the insert head into the receptacle of the iPhone so he could load, usually push it again.  He then releases and I push it again to connect to the load or on my Mac.  Is this a defect in the receptacle for iPhone 6plus or are there other reasons?

    Thank you

    Stuart

    Hello

    Follow the steps here, including check for any debris loading port and/or contact our Apple support or your Genius Bar reservation if necessary:

    If your iPhone, iPad or iPod touch won't charge - Apple Support

  • How can Hello I just transfer program from a laptop to a desktop iMac computer using an Ethernet cable

    Hello

    How can I transfer a single program and its content from a laptop computer to an iMac using an Ethernet cable

    You can network or target mode a mac computer

    OS X Lion mountain: connect to shared computers and servers for files on a network

    Share files between two computers with target - Apple Support disk mode

    However, to transfer a program is not the user data (music, photos, etc.), you must follow the directions of developers and license agreements. Some programs need to be seen to withdraw their authorization, some don't, but most require a clean install to write the necessary components in the correct places, otherwise if you are 'slide' from one place to another, you can easily inherent problems of this method.

  • Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

    My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

    Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

    If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

    The drive may have failed.

    Try different USB cables.

    Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

    Ciao.

  • When I plug it in the optical adapter and cable for Mac book and the receiver no sound?

    Trying to play digital sound with an optical cable to my Mac Book Pro to a HK integrated amplifier.

    No sound.

    Any ideas?

    What output is selected in system preferences > sound > output?

    Optics even figure?

  • iPhone is as a replacement for cable inet?

    I currently have the following:

    cable Internet > > > > > > netgear n600 cable modem > > > > > > > > wifi in condo...

    I would like to replace my internet cable with my iphone of themselves with data unlimited gives me the following...

    unlimited internet data via iphone is > > > > > > netgear n600 cable modem > > > > > > > > > > wifi in condo...

    is there a way for me to do?

    No way to do it, but if your business provides access and use of the Hotspot of the phone, you can use it to provide internet service via wi - fi on the hotspot. However, the carrier must support the use of the Hotspot feature. You can not connect the iPhone to a modem to provide internet services.

    It also means that the phone must be in the location of the others get a wi - fi connection to this place.

  • How to connect an external device via an Ethernet cable with iPad Air?

    I need to connet to my iPad, a digital mixing console THE Behringer X Air xr18.

    LLA WiFi connection e/s is not overall durin live so I need to use the Ethernet cable.

    You can not unless someone makes a dongle, but even in this case an application had to talk with the dongle do not believe that a dongle could add something like kernel as a new network interface which could access normal applications

  • iOS10 update; iPad 2 Air not USB load with certified Amazon lightning cable

    iPad 2 Air and iOS 10: been using an Amazon certified cable lighting to load and iTunes connect via the USB port of > 1 year without any problem. Updated to iOS 10, now the certified cable doesn't load a USB port. It always connects to iTunes, but the sign of the battery flashes the fresh green symbol for 1 second then said stops and says 'no charge '. Tried on 2 USBs and 2 PC with the same result. Tried another brand cable via USB and it costs.

    When I plug this cable from Amazon in the wall charger, it will load. Seems to be something with the iOS10 not recognize the USB load now on this certified cable. I didn't call Apple support on that too, they have no idea what's going on. Their answer is to use an Apple cable of course. Any help is appreciated.

    The cable of the Amazon is located here:

    https://www.Amazon.com/DP/B010U3XVMU/ref=cm_cr_ryp_prd_ttl_sol_0

    It seems there is no real solution beyond using another cable. There were a few people with this problem since iOS10 came out, so it's likely Apple changed something in the settings. As they changed it, it's either a mistake which will mysteriously set with the next update or it's going to be permanent.

  • With the help of TC as a bridge between the Linksys router.  TC will be connected by a cable ethernet to another building.  Will this work? Help.

    Need to get wireless to my workshop about 70 feet from the House.  Linksys router connect to the Hughes Net modem uses.  I have a new time Capsule I would like to set up in the workshop.  I have an ethernet cable from my house to the workshop.  (Had bad lighting storm last week and knocked out two Linksys routers.  TVs all otherwise not serious!  Need help, TC inlays.

    Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.

Maybe you are looking for

  • I lost my mail drafts

    Hi all Sometimes, this site is really hard to manage. It is not really common sense. As I'm typing a response, may I spend from the current page to a previous one due to a dumpster of my fingers on the mouse. Then I try to recover my mail... gone. I

  • Can I upgrade my MacPro Xeon with new software?

    I have an older MacPro. The version of the software is Mac OS X 10.7.5. I want to do a completely new update. Is this possible?

  • HPOfficeJet 7500 large Format: Lines on my prints

    I get thin black horizontal lines on my pictures when I print them.  I don't have this problem with the documents.  Any suggestions? I cleaned and aligned the print heads.

  • Satellite P300D - 15 c is very slow to start WMI

    Hello My pc (Satellite P300D - 15 c) is very slow at startup.When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error. After that, my pc on the screen fr jumps 'welcom' starts normally. So I turn the WMI

  • Foxit Reader does not work with the help of laptop HP and support Guides, suggestions?

    New HP Pavilion with Windows 7 x 64 I downloaded Foxit Reader and installed and then uninstalled Adobe Reader to save space. Then, although it will open my PDF in 'My Documents', it will not open the Guides or learning PDF in HP help and Support file