RT or-9148 how to build a distributed measurement system

Similar Questions

• How to build a table of TDMS file open

  Hello

  Examples NI TDMS - Express write data .vi (time domain), I can build a PDM file with 2 channels (sine and square waveforms) data, which are stored as test.tdms.

  Using Express read .vi data (time domain), 2 channels of waveform data are read. How to build a table later? How to separate the 2 channels of data in the tables 1-2 and manipulate the data using table functions?

  For example,.

  I want to collect 100 from index100 between channel 0 and their average. I want to take 50 samples from the channel 50 1 index and double each element.

  Thank you for your help.

  Bing@NCL

  Hey Bing.

  You can perform operations on different channels in the 2D table using the table to index. This will allow you to choose the channel to operate on, then you can perform the operation inside a loop on each element. In the included code snippet, I used a shift register to find the total cumulative values in channel 0 and then divided by the number of samples.

  I recommend you read some tutorials LabVIEW and bases of knowledge on topics that are related to yours. These could help a lot.

  I hope that my suggestions help,

  Chris

• How to build a table using incoming data stream?

  I'm programming in VBAI but use LV as my Interface of Inspection. The VBAI program will go into a finite loop (x 1000) and the digital indicator with dbl vaule of food in front of the LV Panel if the value double is in order.

  In LV, how to build a table (index 0-999) with this stream?

  
  

• How to build the current controlled current source

  I want to check my solution using multisim, however, I don't know how to build a circuit containing the current controlled current source. Hope someone can help me. Thanks in advance

  .

  The current direction must be placed between the the + 12V and 24 ohms resistance.

  I just made the circuit and if you make the change, you will see that you are right in your calculation.

• How to build a {+ 1, -1} by wavelets?

  I am using labview 8.6 and the statement calls for me to "convolve data with Wavelet following {+ 1, -1}.» How to build this Wavelet?

  Thanks for the help.

  -T. Vepa

  [email protected]

  Something like that

  

• How to build the table with all the combinations of a source table?

  Hello

  I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:

  Stage of Min Max name

  PS1 3.0 3.6 0.3

  PS2 0.9 1.2 0.1

  PS3 1.7 1.9 0.1

  I need to build, from this list, a table of all the combinations as below:

  PS1 PS2 PS3

  3.0 0.9 1.7

  3.0 0.9 1.8

  3.0 0.9 1.9

  3.0 1.0 1.7

  3.0 1.0 1.8

  3.0 1.0 1.9

  3.0 1.1 1.7

  3.0 1.1 1.8

  3.0 1.1 1.9

  3.0 1.2-1.7

  3.0 1.2-1.8

  3.0 1.2-1.9

  3.3 0.9 1.7

  3.3 0.9 1.8

  3.3 0.9 1.9

  3.3 1.0 1.7

  3.3 1.0 1.8

  3.3 1.0 1.9

  3.3 1.1 1.7

  3.3 1.1 1.8

  3.3 1.1 1.9

  3.3 1.2 1.7

  3.3 1.2 1.8

  3.3 1.2 1.9

  3.6 0.9 1.7

  3.6 0.9 1.8

  3.6 0.9 1.9

  3.6 1.0 1.7

  3.6 1.0 1.8

  3.6 1.0 1.9

  3.6 1.1 1.7

  3.6 1.8 1.1

  3.6 1.1 1.9

  3.6 1.2 1.7

  3.6 1.2 1.8

  3.6 1.2 1.9

  How to build this table programmatically?

  (Note also that the number of rows in the source table is not fixed).

  Thanks in advance!

  Hi Berezka,

  using a magic of automatic indexing:

  

• Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  Build an html5 app, I only .html, .js, images, css file folder files / files. How to build a web app/html5 app in that if I did not file config.xml?

  I downloaded the game codes and try to build games using these codes, but I had only

  data folder

  image folder

  js file with .js files

  file .html

  main.js file

  In this case, how build/package web app /html5 app if no config .xml given?

  You will need create your own file config.xml. There are samples and documentation on each of the items on our microsite here:
  https://developer.BlackBerry.com/HTML5/documentation/gold/working_with_config_xml_file_1866970_11.ht...

  Note that all the elements in the samples are not necessary. For each piece, make sure that you actually need in the config.xml file. For example, most web game conversions will not need elements (using the old SDK) since they make use of BlackBerry-specific APIs.

• How to build botan lib for BlackBerry 10?

  Hello

  I'm porting some proxy software - as in 10 BlackBerry platform then I found it requries botan 1.1 +.

    (25,10):#include 
      (26,10):#include 
      (29,16):using namespace Botan;
  

  etc.

  This is the homepage of botan: http://botan.randombit.net/

  y at - it advice on how to use this lib in my application of cascades?

  Botan has a configure.py in the downloaded tar, works fine on linux, but how to build targeted qnx lib?

  Thank you.

  Unfortunately you cannot use the series of development because it requires "version 1.11.0 and require a compatible for most C ++ 11 3.1 Clang compiler or GCC 4.7.

  1.10 stable series should be ok.

• How to build a photo file to be able to print poster size?  I would use an outside vendor to print.

  How to build a photo file to be able to print poster size?  I would like to use an external vendor to print

  Talk to who that it is made to feel and see what their needs are. Most often a jpg high quality enough. Often, you have a PPP high setting for posters due to the viewing distance. 300 DPI to max, but I went up to 100 dpi for prints 30 X 40.

• How to build a Web of Oracle site style

  Dear all,
  (Not sure that this question should be this subsite or not).
  
  My question is how to build a Web of Oracle site style, what technology should be used.
  Example Site: [http://www.orapub.net/ebs/index.htm | http://www.orapub.net/ebs/index.htm]
  The style of this web site is like Oracle Enterprise Manager.
  
  Thank you very much
  Pan

  You can use Oracle Webcenter or just Oracle ADF to build a kind of Oracle Enterprise Manager of the site.
  See details here-
  http://St-curriculum.Oracle.com/OBE/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
  http://www.YouTube.com/watch?v=iE2zTNhlvy8

• How to build the Applet Toolbox

  Dear friends
  
  For now, I'm starting with the applet from the Toolbox. In fact, I don't know how to build them, or run them as a demo even if I had a lot of examples on the internet.
  
  I know that there is an IDE called Developer Suite, which is developed by Gemalto, providing the necessary facilities to write applets toolkit to build and execution. However, this tool is loaded and not free as long as Netbeans or Eclipse.
  
  My question is: How can I build and run a toolkit applet without buy Developer Suite?
  
  P/S: from the internet, I now sim.toolkit. * and sim.access. * two packages. Can I write a box applet tools on Notepad and use the ANT TASK packages (I know ANT is very useful) to build the toolkit to the CAP file applet? If so, how? : D

  Hello

  You should be able to process packets of the Toolbox like any other Java Card library. As long as you have the class files for compiling against and EXP to convert you files can use ANT or even the simple command line tools. Treat these libraries exactly as you would for the JC API and you should be fine.

  See you soon,.
  Shane

• "How to build a reusable toolbar...". "does not.

  I tried to run this suggested in the corner of code document "how to build a reusable tools with Oracle ADF declarative components toolbar".
  I created the toolbar and deployed.
  I have inserted the pot in my project and create a new page.
  I've included the toolbar and hanging methods to the link of the page.
  When I run the page I see the boolbar as well as the data in the table, however, when I click on the button, that nothing has changed (the location of the selection remains unchanged).
  I missed something?
  Should I set a partial trigger?
  TKS
  Tullio

  When you create the declarative element, you now define an attribute and call it something like DataSet (of type String).

  In the declarative component, select the button and for its property TEXT put something like ' next #{uploading. '. DataSet}"- without the quotes.

  This will define that button to show following PGE label if you value DataSet Emp when you use the declarative component.

  So, now you repapckage upward and deploy the library of the ADF and now when you use the component, you can set the DataSet attribute (in the property inspector when you select the instance of the declarative component).

  Hope this helps

  Grant

• How do the contacts become exclude system level?

  When you create a distribution list, under "Excluded", we exclude system level.  I guess these could be hard bounces or invalid email addresses, but I'm not sure.  Exactly how a contact becomes a level system exclude?

  Matt,

  As Paul noted above, he is more level system type include

  -Opt-out (all your unsubscribe through links subscription, Center of preferecence, etc...)

  -Hard Bounceback (invalid email or invalid e-mails identified by the system)

  -Spam unsubscribe (all contacts that have marked e-mail coming from your IP as spam, Eloqua will automatically report them as you unsubscribe)

  -Master exclude (your system administrator build and maintain this list. Corresponds to the list of your competitors or others, that you do not want to receive your emails)

  I hope this helps.

  Good luck!

  Nadine

• How to put in place measures in the application of health?

  How to put in place measures in the application of health?

  What do you mean 'the configuration steps? If you want steps if poster on the health dashboard, tap on health at the bottom of the screen data. Tap fitness. Tap measures. The value "Show on dashboard" on.

  The health app is really more than one application storage and synchronization. You can't do things as targets for a particular metric. If you want to set a goal of step and follow it, use one of the many followed apps available that can extract data from health. Map My Fitness, My Fitness Pal, Jawbone UP and Fitbit (both can be used with the phone if you have an iPhone 5 or a later version). If you like to compete with others, the Club activities is fun.

• Re: How can Satellite - I reset the system?

  Hello

  After a year and a half, my PC starts to run slower.
  So I made a backup of all the files that I want to keep

  How can I reset my system then it will run as good as it was new?

  Greetings

  You ask how do I reinstall the operating system on your laptop?
  Hey Buddy, that would say-insertion of a Windows disc and boot from them?

  I appreciate your comments...