RTE installed but the PC doesn't recognize don't not expansion .vi.
I'm trying to update an old LV application that will be deployed on multiple computers. The updates are completed, but I have problems with the installation. Updates have been tested out on a computer that had LV 7.1 (the original version) and BT 8.6.1. I removed the LV and all components OR computer and then tried to install and run the .vi via an installer built with application builder. After realizing that the driver for the PCI card has also been removed, I have installed the driver NOR-DAQmx 8.8. The installer contains the following...
(i) a set of .vi created in LV8.6.1, and
(II) Run-Time Engine 8.6.1 LV
The of .vi and RTÉ appear to be installed (PC shows C:\Program NIUninstaller Instruments\Shared\LabVIEW Run-file Time\8.6 which contains several .dll files), but the .vi file type is not recognized by the computer.
No idea what I was wrong?
The runtime engine (RTE) can only run executable files (EXE), created by the LabVIEW application builder. First create an executable file, and then create an installer that installs the exe file.
To run the screw, you installed LabVIEW.
Tags: NI Software
Similar Questions
-
I think that if I knew more details, I could not even what to do. And I think in a clumsy attempt to speed up my computer by taking things that were not used... I did this, but I don't know how to cancel it. The physical drive is there and you can extract a disc in and out... but the computer does not see the disk itself, and still less the disk in it.
Help is welcome. Thank you. (And Yes, if I find a way to solve this problem, I'll hang a sign above the screen remind me never to touch again!)
Hi Gverdi,
You can follow the procedure suggested for error code 32 of this link & check if the problem persists:
Explanation of error codes generated by Device Manager in Windows XP Professional
Hope the helps of information.
Please post back and we do know. -
Hello everyone,
I have a weird and frustrating problem with some Linksys WRP400 and I hope you can give me advice.
Long story short: the voice on the WRP400 line keeps stop working, even if it is registered on my SIP PBX. Only a reboot of the router or a stop put on the line temporarily fix the issue.
Let's add some details: I had a lot of WRP400 installed and running, and not all of them have this problem. They all have the same configuration.
I tried to work around the problem, reducing registry expires 3600 to 1200, defining to call without Reg and years call without Reg, setting on restrict the IP Source address and reset daily at 05:00. It doesn't seem to help.
When the problem occurs, if I call the voice line number I get an error "the number you have dialed is not in service" or similar. Sometimes my clients said they can make an outgoing call, while the problem is still on, but more often, the line is totally silent on the outbound road.
On my SIP PBX, I see that the number is regularly recorded, with the right timing.
If I do a sniff of Wireshark on my SIP PBX, I see some regular "ask: INVITE sip:[email protected]/ * /: 5060; transport = udp, with description of session' a PBX to the router but the router never answers.
If I reboot, the vocal line to re-register and start working again.
I have attached a screenshot and the Wireshark Sniffer.
I use the 2.00.32 latest firmware.
You have any advice? It becomes an annoying problem and I am groping in the dark.
Best regards
Maurizio
PS: Should I I asked Belkin or is it always in the right place?
---
http://about.me/mauriziotroilo
Hi, we use the WRP400 of the years and the voice module has always been problematic.
I have a theory on this problem: I think that the safety function to "Restrict the IP Source address" crashes after a few hours of regular work and it filters all incoming SIP messages.
You can confirm this idea by turning on the trace of the sip. In my case the trace shows all SIP entering until the reboot request.
Can I ask you how many CPES you have?
What is the frequency of this problem?
In our network, we have about 2000 installed platform and we must restart on unit 2-3 per day.
Kind regards.
-
Can't open anything
Hi Karpaholix
I would like to ask you a few questions to help focus in the right direction:
Are there other specific details that you can provide that will help us understand and solve your problem? Since when you receive this error message? Have you made changes to your system?
We can try a few steps and try to solve this problem.
A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.
Open default programs by clicking the Start button, click default programs.
In the default programs, you can:
· Set your default programs. This option allows to choose the programs that Windows uses by default. If you want to use your Media Player to open all media files, use this option.
· If a program does not appear in the list, you can make the default program using set Associations.
· Open default programs by clicking the Start button, click default programs.
· Click associate a file type or Protocol with a program.
· Click on the file type or protocol that you want the program to act as the default.
· Click on the program of change.
· Click the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)
· Click OK.
You can also check out this link for more details to make a default program:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
Let us know if it worked!
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
keys on one side does not not after installing sierra on my mac pro book
Hello dssheorey,
Thank you for using communities Support from Apple. I have a problem with your keyboard after updating is not what you expect. The good news are the following steps will help to solve your problem and get your keyboard working properly again. First, start by resetting the management system (SCM) controller on your Mac:
Reset the management system (SCM) controller on your Mac.
If you still having the problem after resetting the SMC, use safe mode to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Sign in to your account in safe mode and test the issue again. Then restart normally and test again to see if this problem is solved.
Try safe mode if your Mac does not end commissioning
Graphics performance limited in recovery of OS X or in safe modeSee you soon!
-
I use DWCS4 on OSX 10.5.8 and that you have just installed Firefox 3.6 update.
Preview in the browser no longer works. This has happened with a recent update of Firefox - what is someone having this problem?
[Subject edited for clarity by Moderator]
You can make a color hex "pipette" very fast easy on a Mac.
First of all, download this:
http://wafflesoftware.NET/hexpicker/
It adds the functionality of hexadecimal color to ColorPicker.
Then open the Script Editor and enter the two words: choose color
Save as an application (this creates a stand alone ColorPicker).
Launch.
Select the mirror of ColorPicker icon, the cursor and click anywhere to get a hexadecimal color value.
I think that there is probably a way to make this app always float. If someone could put the AppleScript for this, I would be very happy.
I hope this helps.
-
I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan. It prints very well I can't scan and save.
I can't find the printer drivers specifically for Yosemite on the Canon website. How can I get this analysis and save them? I have never installed this printer on my iMac.
Have you tried the Applications/Image Capture or VueScan?
-
Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help? Appreciate the assistance.
More details on the iMac you have and how much RAM is installed would certainly contribute to answering your question.
-
You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200. Have a Dell, Windows XP. Help! Not even sure who to ask...
What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?
Printers and faxes is totally blank?
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window and press enter
spooler request SCYou should see something like this:
Service_Name: Spooler
TYPE: 110 WIN32_OWN_PROCESS (interactive)
STATE: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
WIN32_EXIT_CODE: 0 (0X0)
SERVICE_EXIT_CODE: 0 (0X0)
CHECKPOINT: 0X0
WAIT_HINT: 0X0What is the 'State' displayed for you?
Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler". The status should be started and the Startup Type should be automatic. What are the parameters of your correspondents? If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again. Please report the results of your efforts.
-
* Original title: installation of windows 7
I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.
Try the following
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Press SHIFT + F10 from your keyboard
type the following commands
DISKPART
Press enter
the list volume
Next, you select the volume where you want to install Windows 7
Type: select disk #.
# represents the number of the volume
Type: clean
convert mbr
create the primary partition
assets
format fs = ntfs quick
output
output
Try to reinstall.
-
Acrobat Pro XI installed, but the computer has not broke. I want to register this product so that it can be installed on my PC replacement. How to do this please?
registration is not necessary to install on a pc replacement.
Just use your serial number and your installation files to install xi acrobat on your new computer. If you see an error account is activated and you cannot disable the acrobat on your broken computer, use a browser that allows cookies and popups, contact support to adobe for hourly pst by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request a number of activations reset.
-
When I try and download the free trial of CC for the sequels, the installer said 'double click to install', but the red box that I'm supposed to click does not show silent... what I do?
Hello
Please try to download the installer from the link below:
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
Kind regards
Sheena
-
I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me thank you all
Hello
Please quit Setup and then exit the creative application of cloud.
After that, restart the machine.
Let us know if that helps.
Kind regards
Bani
-
I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my own serial number adobe can give me a link or any suggestion for me? ! Thank you very much
Download through the page linked below and use the serial number, you need to activate it.
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
-
Creating cloud said 2015 Lightroom, I installed, but the installation was not successful. How do I install reinitiatite?
If you have a full membership of creative Cloud or a plan of photography, you should be able to download and install Lightroom CC 2015 on the site of creative cloud. Since Lightroom CC is a new product, it will not show as an update in Adobe Application Manager. Instead, press the button install next to Lightroom in the Application Manager.
IF you do not already have it, you can download here creative cloud office:
Using creative cloud | Creative cloud to desktopThen, install Lightroom. For information on downloading and installing applications, see this link:
Using creative cloud | Download, install, update or uninstall applicationsIf you do not see 'install' by Lightroom in the application manager, please first try to log out and return to: connect and disconnect from the creative cloud desktop application
If you still have questions, see option 2 in this link:
Lightroom does not launch or closes automatically after the splash screenKind regards
Guinot
Maybe you are looking for
-
How to scroll through the preview window of keyboard in Spotlight?
Properties of an instance, look up word "this" in the Spotlight, access the result of dictionary approx. Overview window lists a long result. I want to scroll down the result just by key on the keyboard. The problem is that I couldn't find a shortcut
-
My 5s Iphone won't turn on. I loaded the night before and after waking up the next morning, it was completely extinguished. I thought that the battery had run down, then I decided to load it again. Surprisingly, it didn't turn on even after hours of
-
Impossible to change the default SMS contact?
In general when I want to send a message to someone, I bring up the keyboard, to regain contact with universal search, and then click the SMS button next to their mobile phone number. Intuitively, one would think, when the Messenger is set up, it wou
-
I have creative cloud illustrator is photoshop cs6 included
I have a creative cloud with illustrator is photoshop cs6 included for the sameprice or do I have to buy photoshop cs6 also thank you very much Randy! God bless you!
-
vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?
HelloI'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machi