Rules do not work!

I use Outlook on office 2003 and Windows XP.  After a recent computer crash, I reinstalled windows xp and office 2003 from my original disk, and all of a sudden, NO work rules.  they have never were perfect - I'd say about 80% have worked before if.

How can I know what is the problem?

Well, if you have reinstalled then all the old rules would have been lost. If you restored the backup Outlook data, it would depend on how you got the data as if the old rules would go. If you have used either import or export data outllok then all sorts of adjustment that are lost

Assuming that you have executed winupdate, then configured MSUpdate since the first updates and you still have problems with Outlook, then after a group of Office/Outlook

Tags: Windows

Similar Questions

  • Why message rules do not work in Live Mail

    I created messaqge rules in Windows Live Mail.  They are exactly the same that I used in OE.

    They are ' where the line "and then type"Move to Folder ".

    I have created folders under Inbox.  When I applied the rules of Inbox, the following happens.

    Some e-mails are moved.  Many are not. The failures are sometimes other addresses in the 'From '.

    Sometimes failures are at the same address as the others who have been moved successfully.

    There are rules as to where the sub folders can be?

    You can see the results of a long-standing bug in WLMail. Mike Santovec MVP describes it as follows:

    If you check on the of: header and message header has a name and an address, and that you control for the address, the rule will be will not work if manually applied (apply now). This work will be so automatically applied as the downloads from the server message. This work will be that the nameverification. And he will work if the of: header in the message contains only the address but no name.

    To work around the bug, configure the rule to check the name OR address.


    Windows Live Mail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page. You are probably asked to give your version of WLMail and Windows so that the answer may be more accurate. In WLMail to find your version of the software, a press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.
    Noel
     
  • ACS 'Password change rule' does not work with telnet

    Hello:

    I am configuring users will have to change their password when they enter a network device, the first time they connect.

    I have a camera ACS 4.0, the option "disable TELNET change password against this ACS and send the following message to the telnet users session" is disable. When I try to enter in a Catalyst 6500, for example, I type user and pass and I get rejected (RADIUS is the protocol used).

    In the reports of the CSA, I can see, it seems the following error "Impossible authentic - CS expired password.

    I activated the option 'Apply the password change rule' in group settings, other options for the 'password aging rules' are disabled.

    Thanks for your help,

    Francisco

    You can use GANYMEDE + to get the change of password to work.

    Does not work with the RADIUS.

  • CCS rules do not work when the site is published

    I'm working in Dreamweaver 8. My webbsite contains a few pages and link to them works when you click on a specific text. I made a hover effect when the cursor moves on the different texts which works fine when I saw my site, but not when it is published on the net. The rules relating to the hovering effect are made on a separate sheet, CCS, which is added to each page. The CCS-sheet is at the same level in the hiarchy of files like the index page.

    In your HTML, you have these two links in the section head (lines 18 and 27)

    and you also have another

    Remove a link altogether and to correct the extension of css in the css file and in the HTML page

    Make sure that the css file contains ONLY the CSS RULES and not HTML tags

    Download the corrected HTML page and the CSS corrected in your directory root and we'll see.

    Feel free to send me your css file

    Ken at binney dot us

  • CSS border-radius rule does not work in IE9

    Hi all.

    I wonder if anyone has a CSS border-radius rule to work with release of RoboHelp's WebHelp/WebHelp Pro in IE9?

    I have tried to create a new, empty project and have used some simple built-in CSS (no external CSS is called), namely:

    < style type = "text/css" >

    div {}

    border-radius: 15px;

    background-color: #f00;

    }

    < / style >

    and then, in the <>body, all this:

    < div >

    < p > Hello world. < /p >

    < / div >

    The result is exactly as expected when viewed as Safari, Chrome and Firefox, but IE9 stubbornly refuses to display curved corners on the div. The same code works perfectly in IE9 when I write it in Dreamweaver.

    I thought that I might have met around the problem when I found a site which proposes to add the following code to the head of <>:

    < meta http-equiv = "X-UA-Compatible" content = "IE = 9" / >

    It seemed to work when previewing the theme with the "Show selected item" button (it looks like a pair of glasses), but when the WebHelp output has been generated, the rounded corners were still left in IE9. The same is true when the output with WebHelp Pro.
    So, is the process of release of RoboHelp do something to remove the application of the rule of border-radius in IE9? By specifying values individual border-radius for each side of the div did not help either.
    I use RoboHelp 9.0.1.232.

    Hello

    Just did a quick test and it's certainly a bug in IE9. It seems that when you use frameset, the top frame rendering mode is used for all of the images below. Given that the appearance of WebHelp file still use the game of HTML 4 frames, the IE9 rendering mode is on quicks mode or something.

    Solution: Add the meta tag for IE not only your topics, but all of the htm files mode in your output. Try my rendered IE script tags: http://www.wvanweelden.eu/robohelp/scripts/ierendertags. This will add tags to all htm files in your output. Voila, the boundary curves are now visible in IE9.

    A note: I have no idea what standard mode of IE will be at the table of the contents/index/search/etc. of the WebHelp. I don't know if IE9 is already supported by Adobe so be sure to test your WebHelp.

    Take a bow

    Willam

  • Apple Mail rules do not work with iCloud and shipping

    I have recently started using iCloud as my primary e-mail for IMAP and SMTP service.  However, I always have my e-mail account non-Apple of active origin with a setup of the redirector to point to my iCloud email.  I also put my answer use the original non-Apple e-mail.  This configuration works very well except that the e-mail rules don't seem to work on forwarded e-mail messages.

    When you use the iCloud SMTP server, from Apple Mail or from the site from iCloud, you can use your @icloud.com/@me.com/@mac.com TSA address address "from". You cannot use a different, non-iCloud, email address.

  • ACL rule does not work after the SSL VPN connection

    Hello

    I have the following configuration:

    -VLAN LAN (192.168.5.0/24)

    -VLAN WLAN (192.168.20.0/24)

    -SSL VPN VLAN (192.168.200.0/24)

    Default policy denies access to the local network. If the value rule ACL to allow traffic between WLAN and LAN. Works very well.

    Now I connect with AnyConnect and access resources on the network VLAN. Works.

    After you have disconnected the VPN I can't access the LAN to WLAN VLAN. If I disable the ACL rule and turn it back on, it works again until someone connects with SSL VPN.

    I use firmware 1.2.15. Any ideas when this bug fixed?

    Kind regards

    Simon

    HI Simon,.

    This bug will be fixed in 1.2.16.

    I don't know the exact date for the release.

    But it should be out soon. If you need the fix sooner,

    Please open a case of pension.

    Kind regards

    Wei

  • E-mail rule does not always work.

    I have attached a copy of this message and the State which must have managed to get rid of it. If I change the rule and apply it, it works, but tomorrow if I get a similar message, the rule does not work. What's wrong?

    Thank you, Fred

    Try to delete the order and leave just the command Delete.  Back up e-mail in the junk mail folder in the Inbox and use the menu option Message ➙ apply rules to see if that solves it.

  • Some rules don't work

    Hello
    I use mac Mail and create rules to block unwanted emails. But sometimes these rules do not work.
    Today I get an email that is most suborn one I've ever seen.
    1. I copied the address of the sender ([email protected]) and created a rule "If contains < address copied pasted >" then... does ' t work
    2. the electronic mail has no body content. Just an image and a text of churn at the end copied the address to remove and pasted on my second rule of the trial "If the body contains < address copied pasted >" then... does ' t work
    3. copied apparent address (which I know can be rigged, but works most of the time) and pasted to another trial "If contains < address copied pasted >" then... does ' t work
    4 copy the subject and created another rule "If the object contains < address copied pasted >" then... does ' t work
    I noticed several emails that have a content body also cannot copy and paste to use rules. Whatever the word, I use body does ' t of text.

    I've tried "view > source code" and copy the words from there (header, body, etc.) but also does ' t work. How come that spammers send email body that cannot be copied or the case can, are useless for the creation of rules?

    How can we create rules for these cases?

    Thank you very much

    It's in the Tiger BONES (the forum in which you posted)?

  • ACS 5.2 - membership as a Condition of authorization group does not work

    Hello

    I try use "Identity groups" as 'composed Condition' in my article "Access Policy" permission :.

    The result is simple attribute class Radius which must be sent to the SSL VPN router (the image is modified to be smaller):

    Any group identity which must identify him as a member of a business unit has assigned to each user in my RADIUS database (we have used in this way with ACS 4.x - database user and groups has been migrated to 5.2 ACS it).

    Unfortunately these authorization rules do not work as expected. If I stay for the purposes of testing a rule with operator 'not in' instead of 'in' this rule is used and corresponding to the result authorization profile is used.

    So it seems composed condition can't match itself with group identity properly - is this a known BUG / unknown or I am missing something in my configuration? I am a newbie to 5.2 ACS is possible I forgot something.

    Thanks for any help with this strange issue.

    Please confirm that the identity of service access strategy uses internal data for authentication

    To see the full details/steps to demand to go to:

    -

    Launch monitoring & report viewer

    -Select authentication - RADIUS - today

    -When you see the folder for a default application press the icon in the details of the position and you will see all the processing of the application

    The details of authentication is the more relevant article

  • GestionnaireCalc rules don't work

    Hello

    We have EPM environment existing 11.1.2.1, we just installed a new EMP 11.1.2.3 environment. After installing and configuring I exported Calc Manager 11.1.2.1 rules and imported in to 11.1.2.3 environment.

    Looks like business rules are not working. Here are the symptoms of the problem.

    (1) rules keeps random validation errors. (Same valid rule in 11.1.2.1 fails in 11.1.2.3)

    (2) if I create a new rule for my planning application (say Test_Rule) and the verification of the DB table, I don't see any object being created. (Select * from HSP_OBJECT where OBJECT_NAME = 'Test_Rule')

    (3) updates I do 11.1.2.3 regulations is not saved.

    It seems that Calc eating is having hard time discussing planning DB.

    Any help will be appreciated.

    Thank you!

    You may need to patch Manager of Calc. I've seen this issue with 11.1.2.3.500 and it is fixed with 502 (I think that there is someone else out there)

    Concerning

    Celvin Kattookatan

  • NSX 6.1.5 - distribute Firewall rules are not applied to the empty virtual switches

    Hi all

    We have a big problem since we have improved the NSX to version 6.1.3 to 6.1.5.

    I get a bug following this procedure:

    . In vSphere Client--> NSX, create a new virtual switch

    . Distribuer distribute the firewall, create a rule to deny traffic between two survey periods. Example: source: all, destination: all, service: all, Action: reject, applies: the new virtual switch

    . Connect two VMS to the virtual switch and you can test the other (this is false due to the firewall rule)

    . Publish ANY changes on the firewall distribute (could not be related to our rule. Example to change its name to another rule), and the rule starts to operate.

    Additional steps:

    . Remove the firewall rule

    . Identify the virtual machines in the virtual switch

    . Re-create the firewall with applies rule: the virtual switch (still empty)

    . Connect the virtual machines and ping between them. Yet once, the rule does not work.

    . Publish ANY changes on distributed firewalls and the rule starts to operate.

    NSX version 6.1.3 and 6.2.0 both work correctly. But I can't downgrade to 6.1.3 or upgrade to 6.2.0. 6.2.1 upgrade involves the upgrade of several other components.

    I use the following versions:

    . NSX 6.1.5

    . vCenter Version 5.5.0 Build 2414847

    . ESXi, 5.5.0, 2718055

    Please, any ideas?

    Thank you very much

    D.

    She seems to be a bug in 6.1.5 NSX and there is no solution for this yet. There are workarounds, but none of them apply to my "fully automated" environment

    We need to wait for a fix or upgrade to NSX 6.2.1 requiring an upgrade of several components as well.

    D.

  • Rule the world works not!

    Hi all

    I created a global rule to update the value of security group based on the indicator custom during checkin/update. Global rule was working fine, but when I presented the field xIdcProfile to a rule of profile as hidden (since Idcprofile do not have updated before adding it to the rule of profile) the global rule has stopped working. In the global rule, I selected the Checkin activation and put condition to date.

    Currently the security group receives the default value of value of rule to profile. Plesae let me know how to solve this problem.

    Thank you

    Maury

    Easy.

    <$if #active.xcustomflag="" and="" istrue(#active.xcustomflag)$="">

    <$dpPromote("dSecurityGroup", "secure")$="">

    <$else$>

    <$dpPromote("dSecurityGroup", "public")$="">

    <$endif$>

  • BR of planning does not work but I get a msg "Business Rule has been executed successfully"

    Description of the problem: we have a form that has periods as the dimension of the column, the activity and the entity for the dimension of row
    There are deletion of lack of blocks and the lack of data on the dimensions of the line

    We have a business rule to allow combinations of activities/entity so that people can see on the form and put the data in relation to it. It does this by putting a zero for the last period so that the combi row is deleted is no longer

    He worked for a year or two without any problems
    Recently, we had the problem where we run this business rule, and we get the message saying that it has successfully managed...
    However, this is not true since if I check the zero or another number is not done... Occasionally, the rule will be as work as expected to and put the number zero / in
    Usually we run the rule of a menu in a form of planning. But I also tried the rule running via EAS

    I created a new rule that has been simplified to the maximum, and yet I still get the same error
    The two rules below

    Any ideas how to debug this

    Thank you

    PRI

    PS: I am running Hyperion Planning 9.3.1.1.8

    --------------------------------------------------------------------------------------------------------------------------------------------------
    New rule
    ----------------------------------

    /**************************************************************************

    Create new project split activity
    -J' changed the rule so that I'm fixing sparse and 'If' on dense simplify as much as possible only and also simplified
    IE hard coded variables etc... See Code below

    ***************************************************************************/
    SET CREATEBLOCKONEQ
    UPDATECALC OFF SET;

    Fix("FCST","CurrVer","FY11","S000","E234-00000")

    FIX ("CA_DEL44")


    ("Proj_Hours"

    / * Assign value to variable, where there is already a value * /.

    / * Dept value equal to zero to create the block if there is already a value * /.
    IF ("Proj_Hours"-> "Mar" == #Missing)
    'Proj_Hours'-> 'Mar' = 1;
    ENDIF

    'Proj_Hours'-> 'Mar' = 2;

    )

    ENDFIX

    ENDFIX













    ----------------------------------------------------------------------------------------------------------------------------------------------------
    Rule of origin
    ----------------------------------------------------------------------------------------------------------------------
    /**************************************************************************
    Create new activity project split - original Code
    ***************************************************************************/
    SET CREATEBLOCKONEQ
    UPDATECALC OFF SET;
    VAR _var;

    DIFFICULTY ("TransCanada", "CurrVer", FcstYear & FcstMonths, "S000", [SLrtpSourceDept])

    Fix ("Proj_Hours")
    [SLrtpChargeableActivity] (
    @CALCMODE (TOPDOWN);
    / * Assign value to variable, where there is already a value * /.
    _var = [SLrtpChargeableActivity];
    / * Dept value equal to zero to create the block if there is already a value * /.
    IF(_var ==#missing)
    [SLrtpChargeableActivity] = 1;
    ENDIF

    )

    @IDESCENDANTS ("billable activities");

    ENDFIX
    ENDFIX

    Published by: 789458 on March 8, 2011 06:43

    Published by: 789458 on March 8, 2011 06:47

    For your new rule:
    When you try to create the block on a dense dimension, use SET CREATENONMISSINGBLK ON; rather than SET ON CREATEBLOCKONEQ;
    You can try to move the month in the instruction of fix in the new rule just to check if it makes a difference if the original one does not work.

  • Removal of text in the new rule CSS will not work

    I'm a newcomer, but have tried for hours prior to this announcement, finally, I think I did as I should have (rather than post a problem without research on it!)

    I tried indented my navigation bar on my website www.propertyrichmond.com but initially ended up hiding the white text on white background to make it appear correctly on the screen.

    I really want to do this correctly for each different indentions, I did the following:

    I have removed the hidden, text then.

    new CSS rule

    block

    removal of text

    pixel (4,8,12 etc.)

    But it did not work.

    Can anyone help please?

    Thank you

    Helen

    Why not remove them from the table and put them in a list bullet?  Make a class for each

  • for the dash.

    Throw it in your browser and see what you get.

    {.infive}
    text-indent: 50px;
    }
    {.inten}
    text-indent: 100px;
    }


    • text

    • text

    Gary

Maybe you are looking for

  • update firmware 7.6.7 TimeCapsule - uncheck the box "ignore."

    Airport app told me that there is a firmware update available but I can't uncheck 'Ignore' (edit is grayed out put).

  • Focusrite with iMAc

    Hi, I would like to connect focusrite saffire pro40 to iMac. Saffire ends with firewire 400. I can only find firewire800 adapter Thunderbolt. What is the solution please? see you soon

  • I get the Windows Update error 80070490 blues! -Vista

    Original title: I get the Windows Update error 80070490 blues! I am running: Windows Vista Ultimate 32-bit & Internet Explorer 7 (impossible to upgrade to IE8). I've beaten my head against the wall for well over a month now because I can't seem to in

  • How can I stop Windows from automatically restart after installing updates?

    original title: How to prevent automatic shutdown / restart of Windows 7 Restart of Windows 7 is the default setting and it is a huge security risk and can cause defects and severe data loss. When I perform backups at night or copy / paste a huge dat

  • BlackBerry 10 Autostart/keep apps running

    Hi all There are a few apps (for example, reminder, calendar, LinkedIn and so on) that I want to run continuously. If, for some reason, they are closed, they need to be restarted. I would also like their Autostart each time that I reboot my passport.