Run a LV-application on the remote computer

Similar Questions

• View the programs that are running on the remote computer.

  How use remote desktop to view the programs that are running on the remote computer. I connect to the pc remotely is used to monitor a communication system for the alarms. The alarm Viewer application runs as a service. When I connect locally to the computer, I can see the application and view the status of the alarm system. When I connect via remote desktop, I can't. I don't see that the application is running in the services list.

  Do you mean the Task Manager?

  If so, try using change sequence to bring up the Task Manager while in the session remote desktop active...

  http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts

  You might also find something in the PsTools collection...

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649

• I get this message: "the remote computer could not be found" when I try to run Task Scheduler.

  * Original title: Task Scheduler

  When I try to run Task Scheduler, I get this message: "the remote computer could not be found" any help would be appreciated.

  Hello

  Start button-> type to find Services at top and double click on Services

  Locate Task Scheduler - right-click - Select start.

  You may need to redefine ALL the Services on their default values.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• Convert the remote computer fails

  We try to convert our DMZ servers to our vSphere using Converter 4.3.0 of the virtual machine on a computer on the internal network with access to our DMZ VLAN using the method under voltage.

  The app is running and properly authenticate on the DMZ server and the host ESX 4 server. The converter agent is run on the remote computer in the DMZ.

  But as soon the process launches the application runs for one minute (1% in process) conversion failed. Tried to read the newspaper, but nothing here to get proficient on. ? !

  (we tried to convert an internal machine to the virtual machine and an ordinary physical machine also fed on the method and it went well?)

  Any ideas on whats wrong?

  Programmed timer cancelled, succeeds StopKeepAlive

  [2010-10-01 10:15:25.309 04824 info ' reset stub server TCP:srv adapter vmomi.soapStub - esx - nsb2:443: closed]

  A started task 'task-10' for job = ' job-13 ", item = '10' - __thiscall Sub Converter::Server:Job:JobProcessorImpl:StartProcessingJobs (void) ("d:/build/ob/bora-292238/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:351").

  -BEGIN - convert

  Found dangling SSL error: error:00000001:lib (0): func (0): reason (1)

  task - 10:task - 10

  Unexpected exception: converter.fault.CloneFault

  -ERROR - convert: converter.fault.CloneFault

  {(converter.fault.CloneFault)

  dynamicType =

  Take a look at VMware vCenter Converter required ports and verify that the ports are available

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• How can I activate the remote computer to power saving Mode monitor?

  I am a technician in a small private company and it is my duty to keep all desktop computers works very well.
  Desktop computers:

  • are the Dell Optiplex GX260
  • Run Windows XP SP3
  • have Dell 17 "monitors
  • with Intel Pentium 4 (2.4 Ghz) processor with 1 GB RAM

  I do my job after working hours. I connect to them with my laptop (running Windows 7) and check their conditions, one by one. Now, my employer comes to know that when I do this whole process monitors for desktop computers continue to run. As it is not put in place a very large company and electricity and the price of fuel in Pakistan are very high. So, he asked me to find a way to turn the monitors to the power saving mode, when I do my work. In this way, it will be significant energy savings and fund savings in monthly bills. So, can someone please tell me How do I turn on monitor of the remote computer to the power saving mode?

  There are several ways to handle this.

  #1-have affected the power turn on their monitors, but let run PC
  #2-click Start > Control Panel > Power Options and choose how long it is before the screen turns off. Once your activity on their machine is complete, then will kick time.
  #3-you say that you connect to their machines to check their conditions... whatever that means exactly. You can map their computer management console directly to your machine and I * think * he didn't wake up the monitor.

  I hope this helps.

• Task Scheduler: the remote computer was not pop...

  Task Scheduler: the remote computer could not be found appears when you try to start the Scheduler task to the top program and I am not able defrag my computer either because he says that task scheduler is not running, also failed to start other actions when the Task Manager is open and I am able to remove the connection to another task of computer that is there.

  Click the Start button, type in Services, and then click the Services icon.

  Find the Task Scheduler in the list and check that it is running. If not right click and press start.

• "Error 720: a connection to the remote computer could not be established.

  Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.

  I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.

  Hello

  Do the methods and check if this solves the problem.

  Method 1: Try to run the network troubleshooter, check the link for more information on the same.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method2: You can try the steps outlined in the article and check if this gives a probable solution.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Reset Internet Explorer WARNING:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• Error connecting to the remote computer.

  Hello

  I am able to connect to the VIRTUAL LAN, but when connecting to the remote computer using mstsc, I get the error below 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  Here are my details of machine:

  Name of the operating system Microsoft Windows 7 Home Basic
  Version 6.1.7601 Service Pack 1 Build 7601
  System model Inspiron N5010
  System Type x 64-based PC

  Antivirus:
  internet security Kaspersky 2012

  Please come back if you need furthur information.

  Could you please getback me ASAP.

  Thank you & best regards

  Anil.

  Hi Anil,

  You try to connect a Windows 7 Home Basic?

  You cannot use Remote Desktop connection to connect to computers that are running Windows 7 Starter Edition, Windows 7 Home Basic or Windows 7 Edition Home Premium.

  See the following Microsoft article.

  Remote Desktop connection: frequently asked questions

  Keep us updated on the status of the issue.

• HUAWEI ce0682 modem. Error: "the connection was terminated by the remote computer.

  Original title:

  HUAWEI ce0682 modem

  I can not connect my internet modem HUAWEI ce0682 to windows 8. Help! I need to download a different driver? If so, how should I do this? After installing and trying to connect the message is "the connection was interrupted by the remote computer.

  Hi Chelsea,

  What happens when you connect to the modem? Windows detects the modem?

  Usually, these modems wireless should have a built-in application or driver that is installed automatically when connected to a computer. Please see HUAWEI ce0682 manual to learn more about the configuration of the modem and its requirements.

  You can visit the manufacturer's Web site to search for the drivers:

  http://consumer.Huawei.com/en/support/downloads/index.htm

  Connect your home network to the Internet

  Please post with the State of the question.

• Converter Agent cannot be installed on the remote computer

  I receive the error (see attach file) then the converter tries to install the converter Agent on the remote computer.

  Any suggestion.

  Help, please.

  You can manually copy the agent and try to run it in a user session is the same credentials that the account used in step 1?

  The Agent MSI located in the folder of installation of Converter Standalone.

  You get only an error of the converter, but if more details can be found in this way.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Error "Failed to connect to the remote computer" VMware View Client

  Hello everyone. I'm currently testing the package VMware view, but stuck on a problem, I can't understand.  I have already tried Googling every possible thing, but still came short on what to do.

  Currently I have:

  Server ESXi 3.5

  -vCenter Server

  -Connection to the server

  -3 swimming pools installed individual office xp host w/view agents

  At the moment, I seemed straight installation because I am able to connect using VMware client/portal with any full blown windows box anywhere in the internal network.  The problem I have is when I try to load the client software VMware view on a HP Neoware e90 box running windows xp embedded.  When I loaded the software and try to connect, I get the address connection server, authentication screen passes, but receives the error "the connection to the remote computer failed" when I try to select one of the desktop images in the list.

  I am capable of everything everywhere, ping from thin client to conn. Server, thin client desktop image and vice versa.  I am also able to RDP in the desktop images in the light client area but just can't understand why it won't pass this error above.  I tried to disable the firewall on everything, but it still doesn't seem to work.  Am I missing a simple step or has someone else has encountered this problem before? Any help would be greatly appreciated. Thank you.

  When you have disabled the firewall was that the firewall or service / network level? If it was at the level of the network, then you must disable the service and stop it. If you have the service, then can you get the logs of the client and post them. Often this info can indicate where he is faced with a problem.

  You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

• the software on the remote computer seems to be incompatible with this version of screen sharing

  Hello

  I use Apple Remote Desktop (see 3.8) to a MacBook Pro 15 of the retina to access an iMAC 27 5 k. I get the following error message

  "Connection failed for 'iMac_5K'.

  The software on the remote computer seems to be incompatible with this version of screen sharing.

  MacBook pro screen resolution is 1920 x 1200

  the iMac 5K resolution is 3200 x 1800

  Thank you!

  Hemdani

  What is your question? The message seems pretty clear...