Run as administrator

Why Windows 7 always tell me that I have to run as administrator when I'm already logged as administrator? Then he gives me no options. I hate Windows 7

Paula,

The "built-in Administrator account ' that nika0 referred to as has no UAC invite [those who mind].  If someone gets to fool you by running a file infected of any kind, nothing to protect your system.

In a normal account, UAC guests allow you to examine why something has requested access to other protected areas of the computer so you can decide to grant or refuse permission.  This applies to normal administrator thus accounts because they will in the same way that standard users until this UAC prompt accounts is approved and even in this case, it's just the approved program that is allowed to continue.

You should only see the UAC guests when you do something that might affect other users of the computer [or could affect their if there was other users].  I can imagine no burning disc that would generate the UAC prompt.

I wonder if your account has been corruption.  This can happen without specific cause identified, but shut down Windows without going through the procedure of his power right off is considered a probable cause. I suggest that you create a new user Admin in Control Panel [view by - small icons, as applicable], user accounts, manage another account, create a new account.  Then repeat this disc you have recalled to burn.  If it works without causing a UAC prompt then you can conclude that your account has corruption.  If you get the same answer so I'm wrong and you can ignore me.  Please, do not post back with the results.

If you want to say what other examples, you had to get the UAC guests, I can also tell you if they its normal.

Tags: Windows

Similar Questions

  • Upgrade Windows 10, FF40.0 - insists on "Run as Administrator"

    Hello. I have upgraded to Windows 10 a couple of weeks and have had no problems running FF.

    I got (my first?) upgrade of Windows scheduled this morning. Since that time FF does not start. The task is running in the Task Manager, but not ff.

    It WILL start when "Run as Administrator" is selected (with the accompanying message "Are you sure you want to do?"), which have helped me improve of FF 39.0.3 to 40.0, but makes no difference that this either, even after several reboots and audit of all privileges are correct.

    I would obviously prefer not having to bother the right clicks and 'run as administrator' whenever I want to go.

    Now resolved. Has turned out to be the endpoint Trusteer report - a safety program for the browser who has harassed my banking online must be installed.

    deleted via Control Panel and now Firefox works fine.

  • I set Firefox to "Run as Administrator" - now, I can't change it. Help please :)

    Hi, I put 'Run as Administrator' to Firefox, and now I can't change it. I tried to uninstall it using the control panel and by the manual method (helper.exe), but neither one will work. I also used the Troubleshoot utility option in Firefox to try to 'Reset Firefox' and it does not work. Thanks in advance for any help.

    I'm glad to hear that your problem has been resolved.

    If you have not already the case, please mark this thread as solved by the solution of marking.

    This will help other users experience similar problems helps to find faster and more efficiently.

  • Firefox asks me if I run as administrator, but then won't let me install.

    I have download firefox, when I try to install it tells me that I may not have permission to perform all tasks as an administrator and then gave me a password, I do not know, and if I click on as an administrator of the computer, it stops.

    Have you tried to run the Firefox installer as administrator (right click: Run as Administrator)?

  • Search engines not available, except in mode "Run as Administrator". delete the parent.lock file profiles did not help

    After the upgrade to 21 FF, search engines no longer appear in the bar at the top right of the screen, so no searches are possible. I can navigate to my favorites and apparently also to the links contained in the e-mails.

    If I right click on the FF icon and choose the "Run as Administrator" option, the search engines are there again. I tried to delete the parent.lock in the profiles folder, that this solution was solved a problem I've had recently with the previous version of FF (not being not able to open FF and getting the error message on another version of it running, which had to be closed in the first place - but there was no other version running.) In this case, too, before I discovered the solution, I could open FF using the option "Run as Administrator"). However deleting the parent.lock file does not resolve this issue.

    I would be grateful for your help, especially if a person not very computer like me can understand put in simple terms!

    You have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder?

    Try to remove the file search.json and a possible search.sqlite in the Firefox profile folder to reset the default search engines.

    You can use this button to go to the Firefox profile folder:

    • Help > troubleshooting information > profile directory: see file

    Firefox will rebuild the file search.json from the default search engines in the browser\\searchplugins file in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

  • Facebook tries to redirect my usual login page with a dialog "you must be logged in. This allows Mozilla to 'run as administrator' stopped, why?

    By connecting to facebook lately (in the usual help of the login page for the Canada facebook or facebook.com), opens the usual page, but then a dialog box appears stating "you must be logged" which also provides form for email and password boxes. It seems that my login pages are redirected as I'm stuck using the original page to connect. When I chose "run as Administrator" for firefox, has not stopped this dialog box that appears and I am able to use the initial login page. I wonder what might have been past & if/why run firefox in admin mode has stopped this?

    This can be caused by corrupted cookies.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    If clearing cookies doesn't help, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.

    Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other files to present as cookie cookies.sqlite - journal in the profile folder of Firefox in the case where the cookies.sqlite file has been corrupted.

  • My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... .etc

    My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... etc I tried everything. He used to work on Window Vista and a few old iTunes. I've updated to iTune and move to Uverse. It has stopped working. I thought the problem was iTunes so I've updated to the latest version of iTunes in Vista, then update to Vista and then install Windows 7 and then last iTune on Windows 7... I now have everything that the most recent and it still does not work. I have not the firmware on my router can be updated, but I think it's fairly new

    There may be a setting on your router you can disable IPv6.  Try this and also disable IPv6 on your NIC again.

  • Portege R830 - fingerprint authentec AES1660 "run as Administrator"

    Hello everybody,.

    is it possible to configure digital footprints toshiba while there is no need to enter the administrator password when I run some application by the "Run as Administrator" option in windows 7.

    I would use as a single fingerprint (without UAC modyfication).
    I know that it is possible in the previous drivers without toshiba software.

    My configuration:
    Laptop: Toshiba R830
    Fingerprints AES 1660 (driver version: 9.0.8.21)
    The fingerprint utility version: 1.0.3.54
    OS: Windows 7 Pro x 64

    Kind regards
    Przemek

    Post edited by: pmantaj

    > I would like only fingerprint (without UAC modyfication)

    You can change the settings of the UAC

    Try to set the cursor never notify

    Go to user account control settings. Click on the link "change user account control settings.
    In order to disable UAC, move the slider to never notify it the position, and then click OK.

  • Open file must run as administrator

    Hello

    in my code, it's simle open the file.

    in labview, it works without any problem.

    When I executable creat, it cannot open the file but when I run as administrator, it works fine.

    Here white I did:

    1. change built property to run as admin (failed).

    2 read/write registry data (failed).

    change the manifest.

    It's my help:

    
    MetaInstaller
          
    
            
          
       
    

    as you can see that there

    
    

    but the program don't request still run as admin.

    What can I do?

    Best regards

    If you get an obligation to run as administrator, then Windows (or Linux or other) is to 'play with you '.  What I did when I need to put the files where "ordinary users" can access is to place them in a Public folder.  On Windows 7, this is usually a C:\Users\Public\Public Documents.  Can you try this and see if it works?  [I have generally try to keep C: as "clean" as possible and certainly keeping my own files and folders out of the root of C:].

    Bob Schor

  • If you run the program Setup 'Run as Administrator', executable runs with high fees?

    Hello

    Installer of LV chose "run the executable at the end of installation.
    If you run the installation program "Run as Administrator", the executable runs with high fees?

    Best regards

    My apologies - configure when the installer to "run the executable at end of installation", it will run this executable with the admin rights because the installation program itself requires administrator rights.

    LabVIEW installation program can create registry keys for you.

    For your more advanced customization (e.g. selection modules), you have to look different (e.g. InnoSetup) using a solution of installation or you would need to write an executable in LabVIEW that you run after installation that allows you to select the Setup programs you want and run them using System Exec.

  • Most of the games that require 'run as administrator' not loading well much of the time, sometimes even resulting in a blue screen

    OK, so the point is around 2 specific games that I play with my friend, those Heroes of Newerth and League of Legends. The two I need to aprove make changes to the computer to start. Together with launch normally, but when it comes to load a game, I'm gambling or not my pc will fuction when the loading is complete.

    The problems differ from a partial freeze with occasional spikes along the screen to a snowy screen and sometimes even a blue screen or a forced reboot.

    I doubt that the problem has nothing to do with the required performance, especially when it comes to League of Legends. My pc is brand new and it can run the latest game call duty on high graphics with no problems at all and it is several times heavier on the required performance than the other two 2.

    Any ideas what could be causing it and how can I solve it?

    My pc runs on Windows 7 on an AMD Athlon II x 4 630 to 2.80 GHz proccessor 2 GB of RAM, the card mother M4A785TD-V EVO and a gainward gt 240 512 MB GDDR3 graphics card.

    Thank you all for trying to help me.

    Hi Apos,

    Uninstall the game and reinstall it back by running the program as administrator and check if this is useful:

    Steps to follow:

    i. right click on the program

    II. Select run as administrator from the list.

    Uninstall or change a program:http://windows.microsoft.com/en-us/windows7/Uninstall-or-change-a-program

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Why some games and other programs need to be "run as Administrator" mode in 7RC which worked fine in normal mode on 7 beta and vista?

    Why some games and other programs must be run in Admin mode in 7RC which worked fine in normal mode on 7 beta and vista?

    An example of this is the game Guild Wars (www.guildwars.com). I had problems with this with random programs.

    cbello57,
    Run as administrator may be required for some games and programs because they have a permission structure different in Vista in Windows 7 (Windows 7 and Vista are different in how to manage certain permissions).

    I suggest test you installation of the game in the program by clicking on the Setup file by clicking on "Run as administrator".

    This will sometimes solve this kind of situation because it installed the program in a State of high permission.

    This output from test and let us know your results Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • No XP (service pack 3) or run as Administrator program compatibility options.

    Another issue is before you install a program that I downloaded, I right click it and go to properties > compatibility and under run this program in compatibility mode for: there is no option for Windows XP service pack 3 or run as Administrator option. It lists only older versions of Windows and Windows NT 4.0 (service pack 5). I doubled checked that my OS is XP (service pack 3) and my account has administrator privileges, so it's really confusing me! Any clarification would be much appreciated!

    -Eva :)

    Have you tried just downloading, just empty without trying to run it in compatibility mode? I don't think you'll find an xp in the drop-down list entry simply because you run a xp machine and there is no place to enter xp when you try to run a compatible software xp on a xp machine.

  • I forgot the password can't use run as administrator

    I have windows xp. bought to skorea. He has the password before, but was removed when we had the language changed to English. My problem is that I can't run an application as an administrator because he does not accept the empty password. I forgot the password before it reformatted.what I do?
    There are two users when you click Run as administrator (Administrator and user)
    in the control user is the administrator of the computer

    Hello

    1. have you logged as administrator?

    Please follow the steps from the link below.

    http://support.Microsoft.com/kb/321305

  • try opening a thaat file will work as administrator and password. Itstarts to run and then loops back to error repeating run as administrator

    I am trying to open a program that must run as an administrator, but the administrator and the password do not work. It starts, then the shows and the error message indicating the need for authorization and loops back to 'run as administrator'.

    Hello

    You remember recent changes to the computer?

    The program worked very well?

    Follow the methods below to work on the issue

    Method 1: Verify if you are able to run the file in the "clean boot" State of Windows XP.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After you perform a clean boot, follow these as to configure Windows to use a Normal startup state from the article above.

     

    Method 2: start your computer in safe mode and check if you can run the file or program

    See the link below to start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Check if you can run the file in safe mode.

    Method 3: Run the system restore to the date when the file or the program worked very well.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    Note: System Restore does not affect personal files, such as e-mail, documents, or photos. You can only restore files that you have deleted if you have made backups of these files. Programs that are installed after that date will be lost.

    Method 4: Change the password for the administrator account on the computer and check.

  • How to remove run as administrator?

    Now I'm the main user of my computer, outside of my younger sister to make the work of the school. I am set up as the Admin computer on my account, but I accidentally clcikde run as administrator on my MSN Messenger one night while slightly intoxicated.
    With this race, I can't seem to get my Messenger to display what I listen to in my WMP and also is no longer starts up initially because it needs admin permision to run.
    How to on this planet remove this? I kno, I managed before, but I can't for the life of me to memorize or understand the cursed thing.
    Please help me.

    Many thanks in advance,
    Fay
    x

    Right click on the shortcut of the program (or exe file) and choose Properties.
    Switch to the Compatibility tab and uncheck "Run this program as Administrator". Click on 'ok '.

    Best wishes
    Tiffany McLeod aka BookwormDragon

Maybe you are looking for

  • Qosmio X 500-Bluetooth is not ready

    Hello. I have a Qosmio X 500 64 bit with the latest Toshiba bluetooth stackpack Im having to reinstall again and again to get my BT of intellipoint mouse to work. A restart worked once but that stopped after a while. It seems to work great for the fe

  • Unlock phone i 4

    Please I need instruction how to unlock an old iPhone4

  • 8500 A909 do not install more, lost the ability to scan pdf

    Computer Dell laptop windows 7 64 bit edition Home premium printer will print but not scan, tried to reboot with the disk won't install not full, fatal. He gave me a MSI. BARRELS PER DAY. Scan.ent error and I ran across this charging procedure, did n

  • picture area

    I had at one point a photosmart 4070 with hp Director software and image of area. The scanner became unusable and was recycled, removed software. I miss that scanner and software. Now I have a new canon all-in-one and I do not like the software. Can

  • After I had my computer repaired, I am told that I have to buy a license for Windows XP.

    I had this type of computer difficulty my Tower more than a month and he said it was difficult and able to go online. He assured me that my grandchildren could go online with it. ? It says nothing about me having to buy a license for it. was that, up