Run Microsoft remote applications (RemoteApp service) through WebVPN
Hello
Having been troubled by the following thing:
I've got Cisco ASA 8.2 configured to use WebVPN. And it seems that everything is working properly.
But, when I try to run the remote application via Microsoft TS (RemoteApp service web pages), it returns me error: host is unreachable.
The application correct running inside the local network and the run profile includes the IP address of the host. The application installed on the same host running the service Microsoft RemoteApp. So, if I can not access the server, I should have access to the application as well...
So, did anyone knows where the hook?
! ACL
access-list acl_vpn_clients note * VPN access for clients to resources *.
access extensive list ip 172.16.13.0 acl_vpn_clients allow 255.255.255.0 host 172.16.3.101
! Web - acl
access-list acl_web_clients webtype allow url http://172.16.3.101/ * default journal
access-list acl_web_clients webtype allow url rdp://172.16.3.101/ * default journal
! default policy
dynamic-access-policy-registration ClientsAccessPolicy
Description "Access policy by default for users of WebVPN/Anyconnect customers"
network-acl acl_vpn_clients
WebVPN
Appl-acl acl_web_clients
value of the Corporative URL-list
...
...
WBR,
SERG
SERG,
can you say try adding:
Iexplore.exe
mstsc.exe
TSWbPrxy.exeThis is the process involved as far as I understand which app you're using.
The processes were "reverse engineered" by looking at process monitor duing execution ;-)
Marcin
Tags: Cisco Security
Similar Questions
-
system is not able to run the Apple Application Support service
I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?
Can you post the error message you get when you try to install or launch iTunes?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Running a remote application via GDB
Hiya,
I'm trying to debug an application and I want to use GDB remote [that is to say no IDE, just through the command line]. I develop on Linux with Qt/QML for the Playbook. There are some documents [1] and an old net forum [2], but are somehow above my head. Given a file bar "abc.bar", could someone provide step by step instructions on how I can debug it remotely because it runs on the device?
Kind regards
Preet
I have the following text in a Makefile:
[Assuming that you have not made your program]
BlackBerry-debugtokenrequest $ - storepass
- devicepin _tok.bar $ blackberry-deploy-package
.bar - installDebugToken _tok.bar - password $ blackberry - deploy - debugNative - launchApp-device
- password .bar | grep result: | sed / result: / /' > pid [Connection to the device and running GDB]
$ blackberry connect-
- password - sshPublicKey ~/.rim/bbt_id_rsa.pub >/dev/null & $ echo target qnx
: 8000 > gdbrun $ echo sym
> gdbrun $ printf "join" > gdbrun
$ cat pid > gdbrun
$ ntoarm-gdb-command = gdbrun
I have only a PlayBook, so if you also want use it for BB10 later I don't know if it will work. The whole project is hosted at: https://hg.interactivelaboratories.com/playbook_template
-
Run a LV-application on the remote computer
Hi all
I am trying to install an App LabVIEW functioning as a server in our local network. I might add this as a service in the respective machine autostart. However, I prefer to have a method to start the respective application of a different LV (vi or exe) go elsewhere in the local area network. This means that potential customers can start the server if it is not yet done.
Does anyone have an idea? Searched for examples and the internet for no results.
TIA!
Greetings from the Germany!
--
Him
This question comes up a lot. And I always recommend PsTools from SysInternals:
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649.aspx
They are a free set of command line utilities. One of the utilities is PsExec which can be used to launch the exe on remote computers.
NOTE: Remember that setting up your remote application as an "NT Service" is a little more complex. If you manage to actually implement a 'service', you would actually use a different tool (PsService) to start a service on a remote computer. Either one will do the job.
-
Y at - it a Microsoft Remote Desktop Connection application for iPAD?
Hello
I would like to know if there is an IPAD application for Microsoft Windows Remote Desktop Connection for RDP'ing in Microsoft XP computers.Thank you
Hi Mirza,
Currently, there is an app for the iPad to Microsoft Remote Desktop connection. There are plenty of others on the Apple market, and I suggest to search for on iTunes Remote Desktop connection: -
running Microsoft Windows XP Home edition Version 2002 Service pack 3, used the 32-bit or 64-bit Windows 7 Home Premium upgrade?
I followed the instructions on the card that came with the software... indicating that, if I look at my computer it was telling me that my computer works... either 64 or 32, but it does not work. So my question is, how do you know?
You probably have the 32-bit version of XP (in most individuals, and if your system properties page does not have 64-bit, then you have 32-bit.)
However, if you now have XP 32 - bit or 64-bit XP isn't the issue that relate to your decision to install 32-bit or 64-bit Windows 7. This decision depends on the question to know if your hardware can support a 64-bit operating system. In this regard, the main reason for users to install a 64-bit operating system is to allow the use of more than 4 GB of RAM. If your hardware does support more than 4 GB of RAM, there is no interest to install the 64 bit version of Windows 7.
You run the Windows 7 Upgrade Advisor? With what results?
Click Start > run and type msinfo32 in the "Open" box and click OK.
After the system information window has had time fill, click Edit > select all, and then click Edit > copy.
Paste (CTRL + V) into your next reply here. -
What version of Microsoft Office installed on a laptop running Windows Vista Home Premium (Service Pack2), 32-bit operating system
Thanks in advance
Hello
Microsoft Office 2010
Microsoft Office 365 is for Windows 7 or higher
Have you tried to use Microsoft Office Online (free)
-
I keep getting multiple applications to download security: updated for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) its been downloaded more than 20 times with success.
Hi Laura Mallard.
1. did you of recent changes on the computer?
2. facing a similar problem with another update?
3. do you have security software installed on the computer?
See the Microsoft article below and try the steps mentioned, check if it helps.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
-
Original title: title of what I have just a question
I have correctly installed a security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175)
Download size: 2.6 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified in leading to vulnerability MFC application into DLL planting due to not specify the full path to the location/DLL MFC system. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.Microsoft.com/fwlink/?LinkId=209556Help and Support:
http://support.Microsoft.combut it keeps giving me the same update again and again... How many times this update must be installed b4, I can move the following? I should be ready for servicepack2 now
Discover this answer for the solution to this problem:
-
What Microsoft programs in the services tab must be left running for me to do a clean install?
I want to do a clean install. On the configuration of the system, on the Services tab, I want to disable Microsoft programs in order to do a clean install. My question is "what Microsoft programs in the services tab must be left running for me to do a clean install?
Thank you
Computer of rod
Original title: Clean Install
If you ask the subject a clean boot rather than a clean installation, see this.
-
I need 32-bit to run access remotely for the work but have Windows 7 (64)
I have a new Dell with Windows 7 laptop. To work from home, I use a program of remote access that will not work with 64 bit but needs 32. I have been informed that I need to buy Windows Vista. Is this really necessary?
Thank you.
Hello Lyndaware,
Thank you for your message. 64-bit operating systems will be run 32-bit applications, however, you might have been told that your application is compatible with Windows 7. I would advise that you check with your IT support to get better clarification of why you need Windows Vista. For now, Microsoft sold more Vista, but you may be able to find a copy online or through your local dealer.
See you soon
Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot open the alias "Microsoft Remote Desktop" because the original item cannot be found.
Running Mac OS 10.11.3. By clicking on "fix Alias... "does not set it. Afraid to click on "Delete the Alias" since I do not know where is the 'original '. I'm not good with computers, so if you have a solution, please explain as I am a child of 5 years. Thank you.
Where are you clicking when yo get this message?
First, look in your Applications folder and see if Microsoft Remote Desktop is here.
Reinstall Microsoft Remote Desktop.
https://iTunes.Apple.com/us/app/Microsoft-Remote-Desktop/id715768417?MT=12
-
Windows saved user your-9409AD54SC\owner registry while an application or services was still using the registry during log off. The registry will be unloaded when no longer in use.
Hi Johnny,.
1. What is the exact error message you get?
2. Once you get the error message?
3 did you a recent software or changes to the material on the computer?
I suggest to go through the steps from the link provided and check if it helps.
You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based
http://support.Microsoft.com/kb/837115
Hope this helps and provide us more information if you need more assistance. We will be happy to help.
-
Cannot run Microsoft FIXIT error: "an unexpected error has occurred.
Title: Microsoft Fix it fails
Hello
Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred. The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360. I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.The Dell PC Checkup shows as operating without any problems portable equipment.Thanks for any help that can be offered.Kind regardsRoxy111Hello
-What is the FIXIT you have tried to solve this problem?-Do you have problems with the installation of the Windows updates?-You receive an error message while trying to install updates?-You are aware of any changes made on the computer before this problem?Step 1: I suggest you to see the link below and cehck if the problem persists.FIXIT solution CenterStep 2: File system (CFS) CheckerSFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
(a) click Startand type cmd in the box start the search.
(b) right click on cmd in the programs list and then click run as administrator.
If you are prompted for an administrator password or confirmation, type your password or click on continue
(c) for the command prompts, the following line and press ENTER:
sfc/scannow
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
Step 3: Clean bootI suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to configure the computer to boot:
http://support.Microsoft.com/kb/929135
Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.For reference:Information about Service Pack 2 for Windows Vista and Windows Server 2008Hope this information helps. -
I use a new computer with Windows 7 to run tests of endurance for a WCF application.
I see that the w3wp.exe is discharged to 2 - 3 times a day:Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.
DETAIL-
Register User 6 handles is escaped from \Registry\User\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415:
5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \registry\user\s-1-5-82-3006700770-424185619-1745488364-794895919-4004696415-cles
5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \registry\user\s-1-5-82-3006700770-424185619-1745488364-794895919-4004696415-cles
5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows NT\CurrentVersion key
5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows\CurrentVersion\Explorer key
5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections key
5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Control Panel\International keyI run the tests as an administrator.
This continuous restart of IIS prevents my run endurance tests.I am the only user of the administrator on this computer, no other applications running on the computer.
I found similar questions and I tried their solutions without success.
http://blog.Tiensivu.com/Aaron/archives/1909-OCS-2007-R2-services-hang-at-starting-on-reboot-with-Server-2008.html
http://blogs.msdn.com/b/AsiaTech/archive/2010/08/05/load-user-profile-in-IIS-7.aspxThank you.
Hello
If you use IIS, it would be better to post the same question in the IIS forums to get help.
Maybe you are looking for
-
Finger remains open does not work
I am very concerned by exhaust on my 6s iphone home button so I put "Rest finger to open" but it doesn't work? Am I supposed to do something else?
-
Error Code 80604004 cannot install Windows security update KB 2296199
Already tried "Microsoft Fix It" but no problems have been detected
-
Received a stop: C000007b (bad picture) at the start of windows XP load
I can't get my netbook at startup. Once the windows logo starts and loads the screen goes black, then the message on blue screen appears. STOP: C000007b (bad picture)? \C:\windows\system32\csrv.dll is not a valid image. I have made several attem
-
Internal error: failed to get the path of the file directory common 64-bit
Help! I had the worst time trying to figure what to change my path to the registry to resolve this problem. What I discovered Google, I need to change the path to my shared files, it is currently C:\Program Files (x 86) \Common Files\ (I added the---
-
WHEN I TRY TO INSTALL WIN 7 I GOT THIS HELP PLEASEBlue screen STOP: 0x0000005C (0x0000010B, 0x00000001, 0x00000000, 0x00000000)