Run the FDM report on several places

Similar Questions

• How to run the IOPS report / s

  Well, forgive me here to post what may appear to be simple, but honestly, I'm new to this foglight for virtualization and must say that it is not very intuitive...

  I'm trying to run a built-in foglight for enterprise edition of virtualization report, do not know what version se because I don't see anything on this interface that would still provide this info.

  I take steps:

  (1) in the left pane, select reports

  (2) right pane, click on run a report

  (3) the selection of the model, I search for IOPS / s and select the predefined report IOPS / s "FAQ answer: Lun with more strong average IOPS / s" and then click Next

  (4) here's where I'm Stumped, set the input parameters...  I can set the time interval, no bid, but under the present agreement is LUN and shows 'required': Watch and its expects a value... I click on the radio button with the 3 points (periods) and I am presented with the options: data list null request function

  I don't know what it is or what to do... I think that "list" would be to select the list of the LUN, I want to have included in the report, but when I click on it I introduced more confusing on-screen on the list binding...

  This is where I need help here...

  LUN, is this VMware data stores?   not sure... doesn't seem to be, but guess what, that's what they are... a lun is provisioned to VMware, it becomes a data store...

  I'm apparently does nothing good... I have no training, not even sure it exists...

  Goal - to get a report on PAHO are / s against VMware data warehouses...

  can someone please help.

  Hi Kgottleib

  Looks like that the report is part of the dashboard storage environment. If you have enabled (and authorized) storage cartridge, you may be able to find this information in the FAQ (see image below) tab

  

  Just search "Ops".

  I hope this helps.

  Gaston.

• Run the report and form 12 c

  Hello

  As in D2k we where using ifrun.exe to run the Oracle report and form module giving a parameter, in the form of 12 c and point out how we're going to run the package.

  In the ifrun.exe target us where giving as

  C:\ORANT\BIN\ifrun60. EXE C:\ERP\ERP\ERPMODULE. FMX erp/erp@erpksy

  Sandy

  Please see the documentation.  Windows 10 is not a certified platform.  The installation program performs a check to determine if the platform you are installing on is acceptable.  Probably, he sees that you're on Win10 and exits.

  Reminder, the basic steps to install are the following (don't forget first install Windows loopback adapter if the machine doesn't have a static IP):

  1. install the JDK 8U51 + (x 64)

  2. install WLS Infrastructure 12.2.1

  3. install the forms/States 12.2.1

  4. run the repository creation utility (RCU)

  5. run the Setup Wizard (to create the domain)

  6. start the WLS Node Manager, Server Admin and WLS_FORM.  If Windows, you must use a DOS shell with administrator privileges to do this commissioning initial.  Otherwise will result in the field not be created properly.

  Guides to the system requirements and the Installation Guide is located in the library of Doc here:

  http://docs.Oracle.com/middleware/1221/formsandreports/index.html

  The matrix certification can be found here:

  http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1221certmatrix-2739738.xlsx

• Cannot run the report

  DB and dev 10grel2, xp sp2
  Hi all
  IAM trying to run the report in the form with a button generator
  I used this command to start my server: Server rwserver = "MyServer" auto = Yes and it works well.
  
  I created a report object (report5) on the form that contains the button to run the report.
  When I click on the browser reports node to create the report object, I assigned 'myrep' as the file name of the report, not based on a block of data and then created the report of the scott schema dnames.
  
  then closed the Report Builder without saving it in another format.
  
  then I wrote this code in the when button pressed the shutter:

   
  
  declare 
       rp report_object ;
       v varchar2(90) ; 
  begin 
       rp := find_report_object('report5') ; 
       v := run_report_object(rp) ; 
  end ; 

  -nothing wrong with the code, then I ran the form, you press the button to find out:
  FRM-41214 cannot run the report.
  When I looked at the online help, it tells me nothing but
  Cause: The report server could not run the specified report.
  Action: Check the report server and make sure it is running.
  and I checked and it runs and upward.
  What should I do?
  Thanks in advance

  Check my code and try this code in you touch. I write it given your situation and information provided. You can paste directly into your trigger button.

  DECLARE
  
       v_repid REPORT_OBJECT;
       v_rep VARCHAR2(100);
       v_rep_status VARCHAR2(100);
       v_param VARCHAR2(200) := NULL;
       v_valor VARCHAR2(200);
       v_url VARCHAR2(2000);
       v_repserver varchar2(20) := 'myserver'; -- YOUR REPORT SERVER NAME
  
       v_report varchar2(100) := 'E:\myrep.jsp'; -- YOUR REPORT PATH AND NAME
       /* IF .JSP IS NOT WORK CONVERT IT TO .REP AND TRY */
       v_PARAMETRO varchar2(100) := '';
  
  BEGIN
  
       v_repid := FIND_REPORT_OBJECT('report5'); -- report is an element from object navigator report
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_FILENAME, v_report);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_EXECUTION_MODE, BATCH);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_COMM_MODE, SYNCHRONOUS);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESTYPE, cache);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESFORMAT, 'pdf' );
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_DESNAME, v_report);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_SERVER, v_repserver);
       SET_REPORT_OBJECT_PROPERTY(v_repid, REPORT_OTHER, 'paramform=no '||v_PARAMETRO);
       v_rep := RUN_REPORT_OBJECT(v_repid);
       v_rep_status := REPORT_OBJECT_STATUS(v_rep);
       WHILE v_rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
       v_rep_status := REPORT_OBJECT_STATUS(v_rep);
       END LOOP;
       IF v_rep_status = 'FINISHED' THEN
       message(v_rep);
       message(v_rep);
       WEB.SHOW_DOCUMENT(v_url||'/reports/rwservlet/getjobid'||
       SUBSTR(v_rep, INSTR(v_rep,'_', -1)+1)||'?'||'server='||v_repserver, '_blank');
       END IF;
  
  END;
  

  So let me know what you get...

  Ed: I've updated my blog link. You can check the first time, if necessary.

  Published by: HamidHelal on January 21, 2013 12:43 AM

• Add delta to the main report & Reporting solution.

  Hello
  
  We have through hundreds of cases of LDAP, doing many different things, and also over and repeatedly, we need to provide reports of these LDAP Instances. We have a table of scripts to generate the required reports. However, these reports put a significant amount of the load on the DS, and we note that increase in requests for these reports.
  
  I throw out there, if someone could suggest me a good way to serve this report? Any other LDAP effective reporting solution.
  
  Also, I have a questions of LDAP East side, let's say we're dumping all the report of the Organization on Friday. What is the best possible way add the daily 'delta' in order to eliminate the need to run the report every day. Thus, for example, I run a key report Friday, then we Sam, if I could get 'delta' of what has changed since the weekly report, and if there is a way to add the delta to the weekly main report. This way I don't have to run the 'main' report every day. We have requirements, where the consumer wants daily reports.
  
  I would be grateful any person providing any input to help me in this.
  
  Thank you, John.

  If I understand you correctly, you might be able to use the tools ldifsearch and ldif-diff of the OpenDS project for this, assuming you have LDIFs to work with in the first place.

• Orientation Active FDM reports

  Hi all
  
  Sorry to bother you again, but I just met another problem.
  The problem I have is that I don't seem to have the posibility to report
  using the page orientation is landscape.
  If I open the report with "Design Report" in the established client and go to
  'Settings'-> 'Orientation', I am only able to select "Default printer" or "Portrait".
  But the landscape is missing and "Default printer" doesn't seem to work.
  
  Is there a trick on how to modify a report in landscape orientation?
  
  Thanks in advance,
  Markus

  Markus,

  All the FDM reports are designed around "portrait" style sheets There are very few that are designed for the landscape.

  You can open the. RPX file and make the following changes of landscape.

  <>
  RightMargin = "360".
  TopMargin = "360".
  BottomMargin = "360".
  Orientation = '2 '.
  >
  

  Thank you

• "of data type not supported" in the interactive report

  Hello
  
  I'm trying to download a file from a link to an itneractive report.
  
  In the section "attributes of report" interactive column, I defined in the section "links" in a column of the 'target', 'URL', and the URL like this:
  

  DOWNLOAD:CONVENTIONS:#FILE_BLOB#:#ID#::#MIME_TYPE#:#FICHIERS#:#LAST_UPDATE#::attachment:Conv

  When I run the interactive report, the link view this:
  Download: CONVENTIONS: [type]:188:C22.pdf:attachment:Conv of data not supported
  
  The table "CONVENTIONS" is defined as follows:
  ......
  ACTIVATE THE 'ID' NUMBER NOT NULL,
  VARCHAR2 (2048 BYTE) "FILES."
  'FILE_BLOB' BLOB,
  "LAST_UPDATE" DATE,
  'MIME_TYPE' VARCHAR2 (255 BYTE)
  
  Where is my mistake?
  
  Thanks for your help!
  
  Christian

  Hello Christina,

  Sorry Wizard, you need to use is the "form > form on Table with Report", because the normal create assistant interactive report allows you to enter a query.
  Once you have completed the wizard, take a look at the generated SQL statement (must use the dbms_lob.getlength) and the value in "number Format / Date" for this column.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

• Hide the interim report

  Hello
  
  In one of my dashboard, I have a guest (Date setting), the interim report and the detailed report.
  
  Based on the date parameter, interim report will list all the invoice ID that will pass bill to detail report.
  
  I don't want to display interim report. I don't know how to do this.
  
  Please let me know if it is possible or not.
  
  Thank you
  Poojak

  Hi Poojak,

  Here's how your dashboard must be installed:

  --------------------------
  Dasbhoard invites

  Detailed report (with filter on the interim report)
  -----------------------------

  If install you it as you should get exactly what you want. OBIEE run the dash prompt, then it runs the interim report because the detailed report depends on. The interim report will be affected by the guest because even if its nested in a filter condition, it is still considered part of the dashboard. Once the interim report has been filtered by date prompt, then the detailed report comes up.

  And Voila! You have a 'hidden' interim report because it is nested in a filter condition and guests can even have in your dashboard.

  Good luck and if you have found this helpful, please give points.

  -Joe

• setting report parameters fails for the report that runs the stored procedure in QMR FDM 2.1.1

  Hello

  Can someone help us please on this issue we have; If a solution is already available somewhere on the forum please link me to it.

  Please see our situation;

  The script below was part of the customization of a colleague to a script of Oracle FDM ("AftFileImport").

  There are no screenshots at this stage that came back to us with a temporary workaround.

  More detailed description:

  We built a custom report of FDM ("FSBValidationErrorsforAllLocations") that accepts two parameters (CatKey, period) and which calls a procedure stored in SQL Server with the same two parameters. FDM SQL statement of the report is:

  RUN FSBValidationErrorsforAllLocations ' ~ time ~', ~ Cat Key ~

  It works through the User Interface.

  When you try to put the two settings by customizing the event Oracle 'AftFileImport'script, the report fails. Below the part of the code in the 'AftFileImport', where we tried to fill values:

  • objReport.mParametersClear
  • objReport.mParametersAddNew "CatKey", RES. PstrCat
  • objReport.mParametersAddNew 'Period', RES. PstrPer

  We must understand why the way above to the definition of the parameters does not work with stored procedures, as seems to be the only documented way Oracle of setting parameters.

  Please let me know if that's enough.

  
  

  Thank you in advance.
  

  Hello

  which is the error when you run the script?

  • objReport.mParametersAddNew "Cat Key", RES. PstrCat

  Try again with the white space as it is how you named your parameter in the report definition, didn t you?

  Also try to use the built like the following examples:

  	objRP.mParametersClear
  	objRP.mParametersAddNew 'Period', CDate (dtePeriod)
  	objRP.mParametersAddNew 'Loc', CLng (lngLocation)
  	objRP.mParametersAddNew 'CatKey", CLng (lngCatKey)
  	objRP.mParametersAddNew "TargAcct", CStr (strAutoMapAcct)

  Concerning

• Run the report to PL/SQL with the branch to another page

  I have an application which, at various times, I run a PL/SQL procedure to perform an action, and then we must run a report while also navigating away from the current page. The actions are performed on a button click.
  
  I tried several methods, but for the life of me cannot get the system to do the two things (ie. run the report and the direction to another page). I tried to put in page 0 (to be executed after the treatment on the click of a button) a branch with a request line to print the report, followed by a branch to the other page (also to run after the treatment on the button click) - and only the branch page 0 runs in fact. Also tried a branch to the other page only, with the print in the request parameter request - but only runs the report, do not create a branch to the other page.
  
  I also tried to put the call to run the report in the PL/SQL code, using utl_http.start_request (url), but that came with a "Bad Request" error. Also tried to use the owa_util.redirect_url call, but also no chance.
  
  I'm pulling my hair out at this time, especially because I am under pressure to get the system in very short time.
  
  Any suggestion would be appreciated.

  You can run queries report of their URL (f? p = & APP_ID.: 0: & SESSION.: PRINT_REPORT =)

  So one approach would be to
  The button click, call a JS function which
  

• 1 use the Ondemand/recall process in order to perform the processing workflow (file selection box)
  
• 2 open the report in a popup (from your IR page)
  
• 3 redirect leaves the IR page to another page?
  ------
  Another approach:
  
• 1. IR report submits the page
  
• 2. in the PLSQL block, you do the treatment
  
• 3. the branch redirects to a URL that would point to the report URL.
  OR
  
• 3. do you have a JS onload which runs only when demand is demand for BUTTON and opens a page that points to the report.
  ------

  Still another way is to use htp.p in PLSQL block which made the treatment of workflow
  So your code PLSQL

  BEGIN
    --Do the workflow processing here
    --End workflow processing
    htp.p('');
  END;
  

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• I had installed the captain claw game and when I try to run the following error report is: of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.

  original title: C:\DOCUME~1\hariraj\LOCALS~1\Temp\7f3f_appcompat.txt

  I had installed the captain claw game and when I try to run the following error report comes... Please solve my problem...

  ....

  ARCADE-ACTION SIDE-SCROLLING GAME

  Of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.  We are sorry for the inconvenience.

  ERROR SIGNATURE

  AppName: cla.exe AppVer: ModName 1.3.0.60: cla.exe
  ModVer: 1.3.0.60 Offset: 000f3956

  THE FOLLOWING FILES MUST BE INCLUDED IN THE ERROR REPORT

  C:\DOCUME~1\hariraj\LOCALS~1\Temp\b285_appcompat.txt

  Please please please please help me... i will be grateful to you

  Hi Raj Kumar,

  You can follow the steps mentioned in the article below, which deals with a similar question

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  (Article apply to Microsoft games, steps for other games)

• FRM-41214: cannot run the report during the call to the reports

  Hi all,

  I work with Forms 10g on Windows 7 (local working with OC4j), I have a form with a button calling a report, it's the code for the button:

  declare

  Repid REPORT_OBJECT;

  v_rep VARCHAR2 (100);

  rep_status VARCHAR2 (20);

  BEGIN

  Rep: = find_report_object ('EMPS_BY_DEPTS');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repetat');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'paramform = no');

  v_rep: = RUN_REPORT_OBJECT (repid);

  rep_status: = REPORT_OBJECT_STATUS (v_rep); 

  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')

  LOOP

  rep_status: = report_object_status (v_rep);

  END LOOP;

  IF rep_status = "FINISHED" THEN

  WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repetat","_blank"); "

  ON THE OTHER

  message ("error when running report");

  END IF;

  END;

  
  

  I create a report object in the browser of the object with the name ""EMPS_BY_DEPTS "with properties " filename = emps_by_depts.rdf.

  I also have a server with the command server = repetat wserver report
  

  When I press the button to call the report I get this famous 41214 FRM: cannot run the report.

  I tried running the report with rwservlet: http://acer-pc:8889/reports/rwservlet?report=emps_by_depts.rdf & userid=hr/hr@orcl & desformat = pdf & destype = hide & expiry =...

  and it works very well.

  Any idea and thank you
  

  
  

  I do in this case,

  1 - i run report with parameterform = YES (Note: your report is not a form of parameter), so I can see explanation real error report.

  2 - showjobs of report server options

  We use the 11g r2, for 11g r2 reports this link http://: 9002/reports/rwservlet/showjobs? = RptSvr__asinst_1 server , so I can't see error detail.

  10g should be that this option absolutely. but I don't know.

  These can help you.

  Best regards.

• What is the best way to run the report of jasper in the ADF Applications?

  Mr President.

  What is the best way to run the report of jasper in the ADF Applications?

  Concerning

  Tender Hello,

  Check out these links

  Sameh Nassar: Using Jasper report in Application of ADF (detailed)

  https://www.YouTube.com/watch?v=ezX0gdLIhs0

• Several radio buttons per line in the interactive report

  I added the code by radio buttons using Vincent Deelen "in a report of the APEX.

  Vincent Deelen: Using radio buttons in a report of the APEX

  It works exactly like his blog says that it will be a problem.

  My interactive report has more than one page of data. Whenever I click to go to the

  second page of data, the click event on the radio buttons in the dynamic action no longer works.

  I leave the page elements that stores my key no hidden values, and they do not change, once I have change the pages in my interactive report.

  Any ideas as to what to do or something I'm missing.

  Apex 4.2.1

  Oracle 11g Server

  theme of blue reagent 25

  Here's my query

  *********************************************************************************************************

  Select q_cev,

  apex_item. RadioGroup (p_idx = > rownum,)

  p_value = > 'Y ',.

  p_selected_value = > gmpick_flag01,

  p_display = > 'yes ', he said.

  p_attributes = > "class ="gmpickflag01 flagY"") "

  as RBYES,

  apex_item. RadioGroup (p_idx = > rownum,)

  p_value = > 'n',.

  p_selected_value = > gmpick_flag01,

  p_display = > 'no ', he said.

  p_attributes = > "class ="gmpickflag01 flagN"')"

  as RBNO.

  apex_item. RadioGroup (p_idx = > rownum,)

  p_value = > "U."

  p_selected_value = > decode (gmpick_flag01, null, 'U',

  'U', 'U', gmpick_flag01),

  p_display = > "undecided."

  p_attributes = > "class ="gmpickflag01 flagU"')"

  as RBUND,

  sort_qkey1, sort_qkey2, sort_qkey3,

  q_key1_trans, q_key2_trans, q_key3_trans

  from cts_ajha_q_ref LEFT OUTER join cts_gen_multipick

  on (cts_ajha_q_ref.q_cev = cts_gen_multipick.gps_cev

  and cts_gen_multipick.gmpickcode = 'CTS551HZGRCKLIST01. '

  and cts_gen_multipick.op_cev =: P155102_OP_CEV)

  where cts_ajha_q_ref.cts_no_show is null

  and cts_ajha_q_ref.cts_showflag01 is not null

  *********************************************************************************************************

  I created a dynamic Action

  Event:	Click
  Selection type:	jQuery Selector

  jQuery Selector: .gmpickflag01

  Run the JavaScript Code

  var rbyes = $("#radioreport_.apexir_worksheet_data_tbody_tr_td_[headers_="rbyes"]_{entree_:_checked').map (function)

  ({return $(this) .parent () .parent ().find('td[headers="Q_CEV"]').html ()}) .get (.join(':'))

  var rbno = $("#radioreport_.apexir_worksheet_data_tbody_tr_td_[headers_="rbno"]_{entree_:_checked').map (function)

  ({return $(this) .parent () .parent ().find('td[headers="Q_CEV"]').html ()}) .get (.join(':'))

  var rbund = $("#radioreport_.apexir_worksheet_data_tbody_tr_td_[headers_="rbund"]_{entree_:_checked').map (function)

  ({return $(this) .parent () .parent ().find('td[headers="Q_CEV"]').html ()}) .get (.join(':'))

  Send the Q_CEV bounded on the hidden page to submit items.

  $s ('P155102_RBYES', rbyes)

  $s ('P155102_RBNO', rbno)

  $s ('P155102_RBUND', rbund)

  Also have the code to step through the elements of the page to be inserted in the database.

  Try to define the scope of the event on the dynamic action to "dynamic".