Run the jar using Java 7?

Similar Questions

• Can not run the program "keytool": java.io.IOException

  Hello
  
  I would like to follow the procedure to change the password
  glassfish server hosting APEX earphone
  using the change key word subcommand of past, but the keytool utility
  not found:
  
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config >/opt/glassfish3/bin/asadmin
  / opt/glassfish3/bin/asadmin
  Use "exit" to exit and online 'help' for help.
  asadmin > change of master-password mydom01
  Enter the current password > changeit
  
  Enter the new password > changedit
  
  Re-enter the new password > changedit
  
  Can not run the program "keytool": java.io.IOException: error = 2, no such file or directory
  Past change key word command failed.
  asadmin >
  Multimode command failed.
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config > what java
  / usr/bin/Java
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config >
  
  Glassfish entire works well outside it.
  
  keytool could be found in/usr/java/latest/bin/keytool.
  
  We need to have that in the path? There is no requirement in the
  Installation Guide for this, nor did the RPM installation adjust the system
  path accordingly.
  
  I hope someone can tell my how things should be in regards to keytool?
  
  Thank you, Tom

  Hi Tom,

  the procedure to change the password for the listener of glassfish server hosting APEX

  ... more like a topic related to GlassFish for me. I guess you will get the best answers to these questions in a GlassFish related forum...

  For what it's worth, I'll try my best even when:

  Can not run the program "keytool": java.io.IOException: error = 2, no such file or directory

  This seems to be a pretty clear error message: keytool , which probably is used to manage keys for users of GlassFish, was not found. This means, you are either running on an operating system that is not officially certified for GlassFish, or you GlassFish has not been configured correctly.
  You have run

  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config > which java
  / usr/bin/Java

  ... which means that you assume your GlassFish runs without being set JAVA_HOME. If that's true, I'm install you GlassFish correctly from this setting.
  Anyway, you have also discovered that

  keytool could be found in/usr/java/latest/bin/keytool.

  ... that is not + / usr / bin + and probably not in the way of global search of the user on whose behalf your GlassFish is running. Then, you can either create a link [*] for c++ / usr/bin/keytool + do (finally) to + / usr/java/more late/bin/keytool +, or you setup JAVA_HOME to be + / usr/java/last +.
  [*] Note that depending on your operating system, there may be more than one stage of indirection, for example my Ubuntu a + / usr/bin/java + pointing on + / etc/alternatives/java + which points on + / usr/lib/jvm/java-6-Sun/jre/bin/java + where + / usr/lib/jvm/java-6-Sun / + points to the directory containing the real JDK to use. You will probably find something like this on your system. My Ubuntu box has a link for + / usr/bin/keytool +, so I get when running "what keytool.

  We need to have that in the path? There is no requirement in the installation guide for that, nor the RPM installation has adjusted the path system accordingly.

  Again, this is not a forum of GlassFish.

  I hope my advice helps you solve your problem. If they are not, please choose the appropriate forum for your next post on this topic. And I guess, giving additional information about your OS and how you manage your JDK (and which version you use) help people here to help you.

  Thank you

  Udo

• get the id of the component using Java Script

  I have three text fields that I am trying to reset it using Java Script in the Joint Strike Fighter. When, in short, all the text fields three triggered event calls the method below and not reset the other two fields to the point.

  I need to know what text field is under discussion, so I can reset the other two.

  The question that I have does not have the correct id name using evt.getSource ();. I get a big long text for txtField, that looks like: AdfRichInputText [oracle.adf.RichInputText] id = it2

  I'm trying to get just "it2", how do I do this?

  < af:resource type = "javascript" >

  function resetFields (evt) {}

  var txtField = evt.getSource ();

  Alert (txtField);

  If (txtField == 'it2') {}

  var var1 = AdfPage.PAGE.findComponentByAbsoluteId ('it1');

  var var3 = AdfPage.PAGE.findComponentByAbsoluteId ('it3');

  var1. SetValue("");

  var3. SetValue("");

  }

  }

  < / af:resource >

  Thank you very much.

  It worked:

  var txtField = evt.getSource ();

  ID var = txtField.getProperty ("id");     -Returns the name of id for the event source.

• Run the Script using hotkey in InDesign

  Hello

  How to run the script in InDesign using the shortcut key.  Can someone help me?

  Thanks in advance,

  Sudha K

  

• Behavior of the PriorityQueue using Java 6

  Hello
  
  I have a code for test PriorityQueue ordering of items with it below is the natural order.
  
  Out of SOP1 is clear to me.
  
  I was expecting
  SOP2 as: [a, b, d]
  SOP3 as: [a, b, c and d]
  
  Import Java.util;
  Class PQTest {}
  Public Shared Sub main (String... args) {}
  PriorityQueue < String > pq = new PriorityQueue < String > ();
  
  PQ. Add ("b");
  PQ. Add ("d");
  System.out.println (PQ); Output SOP1 [b, d]
  
  PQ. Add ("a");
  System.out.println (PQ); SOP2 output [a, d, b]
  
  PQ. Add ("c");
  System.out.println (PQ); SOP3 output [a, b, c, d]
  }
  }
  
  Could someone shed some light?
  Appreciate your help.

  The method toString() of a PriorityQueue in no way reflect the order of the elements in the queue. Given that the PriorityQueue is based on a 'heap' (see http://download.oracle.com/javase/6/docs/api/java/util/PriorityQueue.html and http://www.cs.auckland.ac.nz/software/AlgAnim/heaps.html) the order that you see in the toString() is probably the physical order of the elements in the table used to back up the 'heap' which is not the logical order of queue.

• I accidentally run the environment using the root account

  Hello
  
  I am trying to restart the concurrent Manager but accidentally into account root then also EPS of DB and APPS
  
  the solution I did was change the owner chown-r applmgr:dba apps / and inst and also for the DB chown-r: dba oracle db.
  After that, I run the DB env and it has been successfully wihtout exisitng errors or addbctl.sh: exit with status 0
  
  but in applications when I run ENV then go to ADMIN_SCRIPTS_HOME/sid_name.
  then adstrtal.sh the APPS ask me a username and password which is entered without having to enter because I'm on the side of the APPS
  
  error message:
  
  adstrtal.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong
  
  USE: adstrtal.sh < appsusername/appspassword >
  
  adstrtal.sh: leave with the State 1
  
  
  
  Help, please
  
  Thank you
  
  Published by: cheesewizz on November 23, 2010 22:05

  Hello

  If please run AutoConfig on node layer (as user oracle and database after the database of supply env file) and make sure that it ends successfully. Then, run AutoConfig on the node application layer (as user applmgr and after the supply env file) and see if it returns any errors.

  Thank you
  Hussein

• Prbolem by running the jar file

  Hello
  I wrote a java program that prints just 'HAI '.
  
  I did that in the form of executable jar file
  
  But when I run that BACK pot, the output is not printing
  
  Please solve my problem
  
  Thank you

  What happens if you run as:

  java -cp Sample.jar Sample
  

• Access UDF then the approximation using Java based a scheduled task

  Hi all!
  I'm closer to the Organization of an oralce database data using the API. I defined some UDF for the shape of the organization. Now how can I access these fields in my Java code to fill?
  for example to access the fields already in the IOM as the name of the Organization, write to us
  
  Name of Organizations.Organization+.
  
  now, if I defined a UDF with the label ' + LOCATION + ', how can I have access to this area?
  
  Currently, I tried
  
  Organizations.LOCATION*.
  
  and
  
  ACT_UDF_LOCATION+.
  
  but as I run it scheduled, organizations are created, the location field is not filled, and displayed reconciliation Manager
  
  
  Unprocessed data*.
  Organizations.LOCATION = < FIELD not FOUND > USA*.
  
  and
  
  Unprocessed data*.
  ACT_UDF_LOCATION = < FIELD not FOUND > USA*.
  
  
  Best regards
  
  Published by: ZIA on Feb 15, 2010 23:53

  Have you added this field in the fields of resource object reconciliation?

  You must create a map of hash for reconciliation, then how do you put location in the hash map as HaspMap takes the value of the key.

  Suppose you put

  HashMap org = new HashMap();
  org.put ("location", "USA");

  Now add this location in the field of resource object recognition and mapping this field under the process definition.

• run the report using hyperlink

  Hello
  I'm working on oracle forms & reports 10g. I have an oracle (RDF) report generating a pdf file. I have create a hyper link that opens a text file. It works very well.
  but I want to know is - it possible that, in my hyperlink other rdf, run and create another output on screen or as a file.
  because my reports generate all the numbers that I create the hyperlink, I want to know how to generate a hyperlink when my use a specific number employee click on another run of rdf and show his personnel information.
  
  concerning

  superdba wrote:
  Hello
  I am working on oracle forms & reports 10g. I have an oracle (RDF) report generating a pdf file. I have create a hyper link that opens a text file. It works very well.
  but I want to know is - it possible that, in my hyperlink other rdf, run & create another exit on screen or as a file.
  because my reports generate all the numbers that I create the hyperlink, I want to know how to generate a hyperlink when my use a specific number employee click on another run of rdf & show his personnel information.

  concerning

  Hi superdba
  There is a great link on the web. Check the report Hyperlink;)

  Hope this helps

  Hamid

• Unable to run the load using OAT test!

  Hello
  
  I recorded a web application using open Script and when I try to run a load test using "Oracle Load Testing", I could see no scenario on the scenario of Biuld tab. I actually tried the new scenario option (by clicking on the icon of the new scenario and scenario dropdown as well), but nothing happened (happens to me to see the page is just get updated).
  
  I use the IE 8.0 mode and HTTP (under Test in charge) for recording.
  
  Could someone tell me how to create a new scenario? Here I need to do anything on open script mode?
  
  Any help would be much appreciated!
  
  Thanks in advance!
  
  Kind regards
  Bazi

  Hi Bazi,

  The issue could be due does not correctly set repository path. Please check repository path where script will be saved.

  Kind regards
  Mahesh

• How to implement Canopen on FPGA to run the engine using NOR-9881?

  Dear,

  Your support will be highly appreciated,

  There is only one available for NOR-9881 example.
   
  Please note that the following materials were properly connected:
  cRIO-9024, cRIO-9113, OR-9881 and motor Nanotec (SMCI36 against L2818L0604-T5X5), the following
  sites Web shows the engine Nanotec in details:
   
  http://us.Nanotec.com/products/660-L28-linear-actuators-with-trapezoid-spindle/
   
  http://us.Nanotec.com/products/1041-SMCI36-stepper-motor-and-BLDC-motor-position ing-control /
   
  The main problem is how to configure the inputs and outputs, where, in most examples, the entry and exit have been automatically
  configured.
   
  the following three examples and I wonder how to start:

  1 - example Nanotec: dependent VISA controls for data transfer
   
  http://us.Nanotec.com/support/application-notes/LabVIEW-example/
   
  2 - reference example CANopen for series C OR - 9853 Module CAN:
  the NOR-9853 has default Can0 which was used in the code

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6093
   
  3 - from finder labView example: search for 9881 then choose
  NOR - CANopen_cRIO.lvproj, which depended on SDO orders for transfer orders
   
  The attached picture shows that NEITHER-9881 can be seen, after compilation and
  loading the bitfile FPGA.
   
  Please, please advice me:
  1. how to start?
  2. how to create variables of entry for NI9881?
  3. how to implement CANopen mode FPGA? where there is no CANopen palette.

  Thanks in advance and

  Hello!

  From my understanding, the 9881 can be treated from the FPGA, but only from the application of the RT. I think that the point 3 of your post examples of the use of the module fine.

  Kind regards

  Georg

• How to call "run the dbms_utility" using native query?

  Hello

  I need compile my invalid object using APP.

  In my EJB, I have a method that does this:

  	Query query = em.createNativeQuery ("execute dbms_utility.compile_schema ('CGBDEV8', false) '");
  	int irslt = query.executeUpdate ();

  But the executeUpdate is a failure.

  Can you provide me with a solution on how it can be done.

  Thanks in advance

  Emile

  Yes, but as I said, jdbc has some restrictions, you cannot use boolean etc types.

  Have you tried statement proposed in my previous answer: em.createNativeQuery ("call dbms_utility.compile_schema ('CGBDEV8', some_util_pck.int2bool (0))" "");   ?

  "According to the docs, second parameter in dbms_utility.compile_schema () is optional if even this should work: em.createNativeQuery (call dbms_utility.compile_schema ('CGBDEV8')" ")";

  Dario

• I'm not able to get the value of an element in the region from the table using Java script

  I have a fixation with two columns area, when the user tries to add a new line without having to fill in the line above, then it should throw an exception. It is the custom page and the home region is located at the end of my page so normal exception raises at the top of the page where the end user referred to in the current. I need to go with popup warning. I built a java script in PR

  code:

  OkButton OASubmitButtonBean = (OASubmitButtonBean) webBean.findChildRecursive ("addrow");

  okButton.setOnClick ("javascript: a = document.getElementById ('prompt');" + "alert ('outside ' + (a.value));" +)

  "if ((a.value)! = ") {input = alert ('check' + (a.value)) ;}} else {alert (' inside the else'+ (a.value));} ");"

  The code above works for entering the message text in the header area, but it is does not make any value if the sub-region of table in advance. Kindly share your point of view on this issue.

  

  This code will give you the same ID only.

  Check the "View Source" code generated from the browser.  https://support.Google.com/AdSense/answer/181951?hl=en

  See you soon

  AJ

• How to create and save the Excel file at the dam using java

  I'm trying to create an excel spreadsheet and save it in the dam. I am able to create Excel in the dam, but no data is it than excel. I use the following codes to create.

  String filename = "updatedMetadata.xls";

  FileOutputStream fos = new FileOutputStream (filename);

  Workbook WritableWorkbook is Workbook.createWorkbook (new File (filename));.

  WritableSheet writableSheet = workbook.createSheet ("update metadata", 0);

  Label = null;

  label = new Label (0, 0, "Header1");

  writableSheet.addCell (label);

  label = new Label (0, 1, "tête2");

  writableSheet.addCell (label);

  label = new Label (0, 2, "Header3");

  writableSheet.addCell (label);

  label = new Label (0, 3, "Header4");

  writableSheet.addCell (label);

  label = new Label (0, 4, "Header5");

  writableSheet.addCell (label);

  label = new Label (0, 5, "Header6");

  writableSheet.addCell (label);

  label = new Label (0, 6, "Header7");

  writableSheet.addCell (label);

  label = new Label (0, 7, "Header8");

  writableSheet.addCell (label);

  label = new Label (1, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 4, "Col. val" "");

  writableSheet.addCell (label);

  label = new Label (1, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 7, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 4, ' Col. val "" ");

  writableSheet.addCell (label);

  label = new Label (2, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 7, "col val");

  writableSheet.addCell (label);

  Workbook.Write ();

  Workbook.Close ();

  ResourceResolver resourceResolver = request.getResourceResolver ();

  AssetManager Manager = resourceResolver.adaptTo (AssetManager.class);

  InputStream is = this.getClass () .getResourceAsStream ("/ content/dam/company/fileFolder /" + filename);

  Element element = manager.createAsset ("/ content/dam/company/fileFolder /" + name of file, is, "application / vnd.ms - excel", true);

  File is created in the path "/ content/dam/company/fileFolder / '.

  The file name is "updatedMetadata.xls".

  Thanks in advance

  Mahesh Narayanan

  I found it myself. I share the code so that in the future someone else can use it.

  String filename = "updatedMetadata.xls";

  ExcelFile to the file = new File (filename);

  Workbook WritableWorkbook = Workbook.createWorkbook (excelFile);

  WritableSheet writableSheet = workbook.createSheet ("update metadata", 0);

  Label = null;

  label = new Label (0, 0, "Header1");

  writableSheet.addCell (label);

  label = new Label (0, 1, "tête2");

  writableSheet.addCell (label);

  label = new Label (0, 2, "Header3");

  writableSheet.addCell (label);

  label = new Label (0, 3, "Header4");

  writableSheet.addCell (label);

  label = new Label (0, 4, "Header5");

  writableSheet.addCell (label);

  label = new Label (0, 5, "Header6");

  writableSheet.addCell (label);

  label = new Label (0, 6, "Header7");

  writableSheet.addCell (label);

  label = new Label (0, 7, "Header8");

  writableSheet.addCell (label);

  label = new Label (1, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 4, "Col. val" "");

  writableSheet.addCell (label);

  label = new Label (1, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (1, 7, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 0, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 1, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 2, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 3, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 4, ' Col. val "" ");

  writableSheet.addCell (label);

  label = new Label (2, 5, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 6, "col val");

  writableSheet.addCell (label);

  label = new Label (2, 7, "col val");

  writableSheet.addCell (label);

  Workbook.Write ();

  Workbook.Close ();

  ResourceResolver resourceResolver = request.getResourceResolver ();

  AssetManager Manager = resourceResolver.adaptTo (AssetManager.class);

  InputStream stream = new FileInputStream (excelFile);

  Element element = manager.createAsset ("/ content/dam/company/fileFolder /" + name of file, is, "application / vnd.ms - excel", true);

• Run the workflow using the SOAP API with PHP

  Hello

  I'm trying to integrate workflow from code PHP using the SOAP API to Orchestrator.

  <? PHP

  Try

  {

  $parameters = array (username = > "username", password = > "passwd");

  $client = new SoapClient ('https://vcoserver:8281 / vco/vmware-vmo-webcontrol/webservice?) WSDL "); "

  $result = $client-> getAllWorkflows ($parameters);

  foreach ($result as $item)

  {

  foreach ($item as $work)

  {

  echo $work-> name;

  echo "< br >".

  echo "id";

  echo $work-> id;

  echo "< br / > ';

  }

  }

  }

  catch (Exception $e)

  {

  echo $e;

  }

  ? >

  I do not see errors/exceptions, but don't see any output as well.

  Am I missing something?

  Could you use

  print curl_error($curl);
  

  After curl_exec to check if there are errors?

  If there is an error in SSL certificate, as ' SSL certificate problem: unable to get local issuer certificate ", you can either install certificates roots (Google it for more information how to do), or disable checking of certificates by peers in CURL with something like:"

  curl_setopt($curl, CURLOPT_SSL_VERIFYPEER, 0);