Run the vi in the previous version of Labview and no added kit

Similar Questions

• I have 2 problems downloading Acrobat XI pro as a user of creative cloud. I get an error below when downloading and I lost the previous version of Acrobat and my drive is no longer load.

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 3 error(s)    ----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------  ERROR: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603  ------------------------------------------------------------------------------------- 

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  The rest, we can not know. You have not provided any information system or other useful technical details as actually refers to the 'previous version'.

  Mylenium

• What are the current versions of Labview and Teststand

  Hello

  I currently am downlading the current versions of teststand and labview for evaluation.

  The Teststand-link I saw that it is called "Teststand" 2012.

  1 but there is no version information in the Labview download. Is also 2012 version?

  2 is the two 32-bit-software things?

  3. After installing the evaluation-downloads - can they be activated with a key, or what I need to install again when the CDs arrive in my office?

  Thanks for help

  Iliale wrote:

  Thx for the links.

  I am using Windows 7 64 bit - I'd rather then also Labview 64? (Links to download NOT only provides 32-bit for download)

  There will be problems with my existing 8, 5 - screw Labview conversion to the new Labview2012?

  Thank you

  You can have as many 32-bit and 64-bit installed.  Don't forget your target when you generate an exe file.  64-bit compiled programs can run on 64-bit computers.

  You should have no problem upgrade your code of 8.5.

• CC shows Adobe Adobe Premier Pro like the previous Version, when download and installed as a trial version.

  Hey Adobe CC PP

  I want to make a small project to DVD and I wanted to try Adobe Premier Pro, but when I download and installed Adobe CC, I went directly and want to download Adobe Premier Pro as the trial and now it appeared like that.

  

  I can't start the C56 Pro first. What is wrong with him?

  Hi CrazyComputerMan,

  I think you have a 32-bit operating system installed. Is it?

  First Pro CC is a 64-bit application and can not operate with a 32-bit operating system.

  Thank you

  Regalo

• How can I get the previous version of flash? pre 11.1.102.62

  10.7.3 OSX lion

  Firefox 10.0.2 or Safari Version 5.1.3 (7534.53.10)

  11.1.102.62 or 11.1.102.64

  I look at the site and I can't find a version prior to 11.1.102.62; I can only find 11.1.102.64 and 10.1.102.64 nothing in between.

  I'm trying to help out.

  Flash works great on a computer with everything even a week earlier, another computer that was sent to the back so that I can't look at versions of the software. I know he was running the previous version of flash at least a befor.62 out. The same problems occur avec.64

  Examples of questions:

  (Below described problems on Firefox, similar issues on Safari)

  http://www.TonyPa.pri.EE/Blockarelli.html

  It says 'WELCOME 0123456789' at the top and when you click on the game to play it you can not do anything it gives just a dotted line to the game.

  http://www.TonyPa.pri.EE/cobacoli.html

  If you play level one and complete the level one, then again, if you finish a level again once it does nothing that the screen does not change.

  On stage, select menu play all levels and level score show that '88"(must be 1, 2, 3, etc. and then no score until what played)

  Simiarly to cobacoli

  http://ArmorGames.com/play/11711/the-adventures-of-dear-Explorer

  It loads to the main screen and all the buttons of the menu display as "#Type1 #" should be something like game, continue, settings, etc.

  http://www.TonyPa.pri.EE/Taberinos.html

  Once you have finished the game the highscore list just never came up, the game ends just; the game does not restart.

  The same phenomenon occurs here http://www.TonyPa.pri.EE/turnellio.html

  http://www.Kongregate.com/games/mofunzone/zombie-exterminator

  He played just the intro to mofunzone over and over again

  Hulu videos have a decent amount of empty time before loading the ad. They have a problem continuing to play when jumping around. I often have to click a few different parts of the track until it starts playing again.

  If you load this game plays the logo of the armor, then the alillm.com plays while the game is only black

  ArmorGames.com/play/11758/HAZMAT

  YouTube videos YouTube seem to play fine on this computer. All with flash.62 works well on my other machine under snow leopard.

  completely uninstall and then reinstall work. http://forums.Adobe.com/thread/928315

  I wonder what happened the first time. He was not completely broken, but in many cases it was not working properly.

• I tried to install the previous version, but keep on getting the latest version.

  I discovered that Norton Safe ID does not work in the latest version of Firefox (I also discovered that it is a problem of Symantec). I installed the previous version of Firefox and was so happy, my Norton Safe Search and Safe ID was back. I kept getting notices asking to upgrade to the latest version. I don't know and make sure that I do not start the upgrade. Unfortunately, while I wasn't looking, installed Firefox last version... I tried to return the previous version, but it keeps the installation on the most recent version. Until Symantec solves the problem, I would like to use the previous version. I have Internet Explorer, that I do not particularly like, I prefer Firefox. No idea how I can temporary solve the problem of Symantec. Thank you. Blenda.

  Hello

  This is a problem caused by Symantec do not receive an update pretty quickly. They said that an update is due at the end of October, so I hope that is soon.

  I always recommend use you the most recent and and an updated version of Firefox. This ensures you get the new features as well as all stability and security fixes.

  On the installation of an earlier version, if you want to prevent the update of Firefox, type Subject: preferences #advanced in the address bar and click on Update. Here you will find options to disable updates to update, but as mentioned, this is not recommended.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• Set the latest version of Labview

  Hello

  If a PC has 2 (development) versions of Labview installed, for example Labview 2010 and 2012 of Labview, how does Teststand know what Labview adapter to use?

  I am wanting to avoid the situation where a newspaper operator (Windows), should open close Labview 2012, then open the Teststand operator Interface.

  If not followed then the operator Interface opens Labview 2010, which is not wanted.

  Thank you I could remove the old version of Labview and that each operator only has to open/close once Labview 2012.

  Y at - it a setting of all user/audience in Win XP and 7 which can be modified?

  Kind regards

  Gary.

  Or you can deploy your automation, so it does not use the development environment and it will automatically detect the correct version of the LV RTE.

  If all of the development environment, TestStand will use the current version of LabVIEW.  I think this could enlighten us: http://forums.ni.com/t5/LabVIEW/Change-currently-active-LV-version-in-batch-script/m-p/2422750#M7474...

  Here is another link on all of this:

  http://digital.NI.com/public.nsf/allkb/A3F87B8347E41363862575DD00139245?OpenDocument

  Hope this helps,

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• I have the latest version of Java and the addin card is not there. I have a mac. I'm not running on 32-bit. I had so many problems with this new java updat

  I have updated java 7 up to 45 (by mistake, this version of java does not work with vpn and according to apple, I can't revert to the previous version). The applet plugin does not appear in my Add ons. I'm not running 32-bit. I have read and tried every article I can find. I uninstalled and reinstalled still no luck. I have an iMac, just put update to maverick.

  See if anything here is useful:

  • http://KB.mozillazine.org/Java#If_the_Java_plugin_does_not_appear_in_the_Add-ons_Manager_even_though_Java_is_installed

• Found 0 results for how to UNINSTALL Firefox 9.0.1? I installed it last night and Firefox crashed maybe 20 times since then. The previous version crashes almost never. Help, please

  Since installing Firefox 9.0.1 YESTERDAY evening on my iMac, which is running OSX v. 10.5.8, Firefox hangs now every few minutes. It often happens that I'm going from one site to the other - when I click on a site referenced to my favorites, Firefox crashes as the following website is coming. I've NEVER had this problem with Firefox before. I need to uninstall it and go back to the previous version of Firefox, but OSX is not a simple routine "back to the previous configuration. Or... Please immediately send a fix for version 9.0.1 (assuming that others have the same problem).

  Follow the suggestions mentioned in the following articles:

  • Firefox plant - troubleshoot and prevent assistance fixing crashes

  Check and tell if its working.

  Might not be related to your problem, but some of your Plugins are out of date

  • Update all of your Firefox Plugins-> https://www.mozilla.org/en-US/plugincheck/
  • During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)

• Hello. I installed the latest version of Firefox and I don't like. How can I go on back to the previous version (3.6.3 I think)? Thanks, Geoff

  I think the latest version is very slow when you access web pages. I want to return to the previous version to see if it's better. How can I go about changing back?

  To return to the previous secure version which is 3.6.17, follow these steps:

  1. Go to Download Firefox v3.6.17 and upload it to the office.
  2. Then go to add/remove programs, scroll down to "Mozilla Firefox" and delete it, choosing to keep your bookmarks, etc., the customizations (don't tick the box).
  3. Reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the installation file downloaded previously on the desktop.

  Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.

  After completing the installation, go to the Plugins check page and update if necessary.

  However, before go you that route, here are some tips to make it look like the previous version of FF4.

  • Right-click on an empty part of the toolbar tab and click "Tabs on top" to remove the check mark. Tabs later reappears under the search bar.
  • Repeat the same steps, but click on the top of the page, one called 'Menu bar '. This will restore the text at the top links.
  • To rearrange the layout, repeat the same steps and choose "Customize". A Panel opens and who remains on the screen, you can move elements like toolbars, buttons etc. around and place them anywhere you want. You can also drag anything there that you don't like Panel and add anything you want by dragging it out of there.
  • To replace the status bar at the bottom of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

• How can I switch to the previous version of firefox? This sucks 4.

  My HP computer has a program that stores logins and passwords so he can connect with a finger-roll printed. Since the update, none of the stored passwords or connections work and the program will not recognize anything as a login page. I hate it and want to come back to the previous version!

  Here is the process to roll back:

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See your backup information.

  Then, download and save Firefox 3.6 on your desktop for later installation. http://www.Mozilla.com/Firefox/all-older

  Close Firefox 4, and then uninstall it. Do not remove your personal data and settings, the entire program. Any report you can skip this step and simply run the installer for 3.6.

  Finally, you can reinstall Firefox 3.6. Unless you have installed an incompatible add-on, it should pick up where you left off. If there are serious questions, please post back with details.

  Note: I have not actually tried myself!

• My edited icon does not replace the previous version on the desktop

  I use CVI 7.0 on Windows XP. I used CVI icon editor to create an icon 32 x 32 for my application. The target parameters build cutting edge of window to file icon and displays correctly. I also created a group of files in the window of Distribution Kit and the group contains only the .exe with the option to create shortcuts on the desktop. I build dist kit and install it, him and everything is fine. The icon appears on the desktop and launches the application.

  The problem is when I change the icon file. The modified version appears in the settings of the target (great so far), but when I have the dist of rebuilding kit and install it, the old desktop icon is not replaced by the new although the old icon still launches the latest version of the app. I have not changed the GUID between generations, so running setup.exe kit dist first deletes the previous version of the application and its icon on the desktop. The second round of setup.exe installs the new version of app but the old icon.

  If I change the name of the icon file every time then the correct icon appears on the desktop. However I prefer to use a generic icon for each version file name. It of like CVI or Windows associates the first version of an app icon and remembers that the association is updated using a different icon file name.

  So the question is, how can I make sure that the latest version of the icon appears on the desktop do not have to change the file name each time?

  Mark,

  I got a solution to nickb. This can be found at http://decibel.ni.com/content/message/8480#8480. I'm new to these forums, so I don't know why it seems to be in a different for your response area, unless somehow I posted the original question in two areas. In any case, in case there is something wrong with the link, the solution is to delete the cvibuild. Directory and then recompile the project. I found more than remove the resources.res file was sufficient. As I said to nickb, it would be good if CVI deleted this directory automatically to ensure a clean build each time.

  Thank you for your time.

  Tom.

• Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7

  Original title: Windows problem of dimming.
  Problem: impossible to up grade windows vista to windows 7
  Error message (roughly): start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows.
  Description: actually I have windows 7 genuine DVD which can start the installer to start. but I can't find anyway to install windows 7. I tried what windows error msg says.
  Help.
                                        

  Hi laadpiyush,

  1. which version of Windows Vista is installed on the system?

  2. which edition of Windows 7 you are trying to upgrade?

  3 - is 32-bit or 64-bit?

  Step 1:

  You can first check the upgrade paths to perform an Update Installation of Windows 7.

  Links:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Step 2:

  Before upgrading to windows 7, you can try the following steps and start the upgrade installation.

  A. back up all important data on the system.

  Run the Upgrade Advisor

  See the link to download and run the Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Software c. Security uninstall and reinstall after upgrade Installation.

  D. sign off all external devices connected (except keyboard and mouse) and start the installation.

  For more information on the Upgrade Installation, see the links:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6719ae72-7187-45CD-80f7-55e66f3ec686

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Restore a FMS upgrade to the previous version?

  I got an FMS that was to version 5.6.4 and tried to update to 5.6.7. It is having a problem connecting to database and cannot update the database currently. I wanted to know if it was even possible to return to 5.6.4? Is it as simple as running the 5.6.4 Installer and update option?

  Thank you

  krizzo

  Hello

  If the database has been modified (even a little) then you cannot revert to a previous version. That's why the upgrade procedure requires a backup of database.

  Concerning

  Nils