Run the workflow as a service account

Similar Questions

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• After you run the workflow in minor data, then the window "start" made its appearance all the time and don't can't stop it

  I installed the oracle11g and configured the SQL Developer minor and the data correctly, but when I run a workflow, the window 'departure' appears all the time, can't walk in the phase of runing and also can not stop. For now, the only thing I can do is to kill the program in the Windows operating system.

  Sometimes, when I kill the program and restart and restart run the workflow, it may be normal.

  So, I would like to know why and how to sovle it?

  Yes, there is a simple solution:

  "To ensure that Workflow tasks Data Miner is visible in your user interface".

  It is the window that displays the list of workflows that were run during the last day, and also all workflows running active and their completion percentage.

  If this window is visible, if it is not blocked from viewing by another tab, then you will avoid your problem.
  If you do not see the window tasks of Workflow Data Miner at all, then go to the menu: Tools-> Data Miner-> make it Visible.

  That should it appears in your user interface, then you should just make sure that it is fully visible.

  SQL Dev 4.0 final version will be released soon, it will be difficult, so this problem is no longer a problem.

  Thank you, Mark

• Thin client Orchestrator - do a right-click on the item in the inventory to run the workflow

  I have workflows that X type as a parameter.  Workflows are those that I wrote and the type of X is an object I created.  I have X type items in the inventory.  I right click on the item and select 'run the workflow... '. ».  I get the error "NoSuchElementException.  I tried to turn the journal level and research in newspapers, but I don't see any useful information on why it's a failure.  I can't find documentation that says explicitly that everything needed to run the workflow of the inventory.  I looked through the vso.xml for the vSphere plugin and can see nothing special here that I do not.  I can't find anything in the workflow that controls this behavior.  I put breakpoints in find(), findAll() findRelation() and can see no call there during the attempt.

  Any ideas?

  In your presentation of workflow for your type of object that is an input, specify the property 'display in the inventory?

  

• Is it possible to run the command script with user account administrator rights?

  Is it possible to run the command script with administrator user account rights means please tell me how to...

  I need to run it in windows 7 professional service pack 1.

  There are a few myths that won't go away, for example

  • You can perform administrative tasks when you are working from a command prompt.
  • A script (batch file, VBScript, PowerShell) gives you administrative rights.

  There is no substance to a myth. Your account has administrator privileges, or it does not. There is no backdoor.

• How to move the vm as param of entry to run the workflow

  Hello

  I'm trying to run a workflow through the development of webservices API for vCenter Orchestrator.

  could you please tell me how can I make a virtual machine typ VC:VirtualMachine as a param of entry via API.

  for now, I do it this way and his giving side workflow error "parameter invalid vm.

  Please notify

  FinderResult = FinderResult

  VMO .findForId ('VC:VirtualMachine' 'aspvc.ap.vspp/vm-199' username password);

  InputParameters [] WorkflowTokenAttribute =

  new WorkflowTokenAttribute [workflow.getInParameters (). ] length ];

  in our workflow, we have only one parameter.

  inputParameters [0] =.

  new WorkflowTokenAttribute();

  inputParameters [0] .setName (workflow.getInParameters () [0] .getName ());

  inputParameters [0] .setType (workflow.getInParameters () [0] .getType ());

  and put our values serialized to Virtual Machines

  / / #{#finderResultlist + #+ finderResult. getDunesUri() + #} #

  inputParameters [0] .setValue ("

  ("#{#VC:VirtualMachine #dunes://service.dunes.ch/CustomSDKObject?id="aspvc.ap.vspp/vm-199"& dunesName ="VC:VirtualMachine"#} #")

  Now, start the workflow. Here, we don't need to wait for the end of the workflow

  VMO .executeWorkflow (workflow.getId (), , username password )

  inputParameters);

  I'm not an expert using the api, but could you tell me what happens if you change:

  .setValue("ParamètresSaisie (InputParameters) [0]")

  #{' #VC:VirtualMachine #dunes://service.dunes.ch/CustomSDKObject?id= ' aspvc.ap.vspp/vm-199'&dunesName='VC:VirtualMachine'#}# ')}

  TO

  inputParameters [0] .setValue ("dunes://service.dunes.ch/CustomSDKObject?id=" aspvc.ap.vspp/vm-199'&dunesName='VC:VirtualMachine' "")

• Run the workflow - vCO 5.1 API

  Hi, I have problems running a Workflow using the new VCO 5.1 RESTful API. Ask yourself if you can help.

  I'm trying to run a workflow called "HelloAPI", which simply takes an input parameter 'name', which is then printed to the System.log.

  I get the error message:

  The request sent by the client is syntactically incorrect.

  Status code: 400

  When you try to run the POST according to the API.

  curl - k - user vcoadmin:vcoadmin h ' Content-Type: application / xml ' X - POST d open https:// < vco-Server >: 8281/api/stream/3572df5e-f1ba-4ac4-b7f6-ea3b2cf4bc60/executions/

  Open looks like:

  <? XML version = "1.0" encoding = "UTF-8"? >
  " < vco:execution - context xmlns:vco = ' http://www.VMware.com/VCO "xmlns ="vco"> "
  < vco:parameters >
  < name vco:parameter = "name" type = "string" description = "' worn 'local' = >"
  Curl < vco:string > < / vco:string >
  < / vco:parameter >
  < / vco:parameters >
  < / vco:execution - context >

  Initially, I had problems because of the Type of content, but was able to solve that by sending in the header. For me, this XML file looks like how the execution context should according to the API documentation. Any help would be appreciated.

  Thank you

  Steve

  Hi Steve,.

  POST-ment to. .. /workflows/ {identifier} / presentation/instances / creates a new run of presentation which is useful if you want to validate input parameters. If you are sure that they are valid (as in your example) you don't need to start running a presentation; You can directly start the workflow runtime.

  As I said in my previous answer, your first attempt was almost correct except the curl command line syntax to specify the request file - it should be

  @request.xml d

  
  

  Thank you

  Ilian

• Run the Workflow as a specific user

  Hello world

  My English is not great, so I'm sorry for the typos, I'll do.

  I have a little problem with the management of rights in vCenter Orchestrator. I just created a new environment Orchestrator. I created the workflow a bit like for example to stop or restart virtual machines. My problem is that I don't want all users to be able to manage each VMs. To realize that I need configure the Orchestrator to use a single session per user. Then I set the permissions on the server vCenter Server. Which works very well.

  Know that I created another workflow that clone of an existing virtual machine. But as the Orchestrator uses a single session per user, vCO users do not have sufficient rights to clone a virtual machine. This is because I would like to run the cloning-workflow to run as another user. I already discovered "credentials of change" - Action, but know the users do not have sufficient rights to change credentials. I won't give them administrator rights, at least until they are able to change the workflow by using the Orchestrator Client.

  So I tried to restrict access using Client Orchestrator. But this also seems to be impossible without denying web access. Now I'm stuck. Is there any solution for this?

  Thank you very much.

  OK, I just did the test on my side so I understand better what is happening.

  It seems that the admin should be just defined the workflow approval and each parent to the root of the change. It's admin roles give the right to create / modify / delete.

  I think it's the same situation that you are experiencing.

  A work around would be to use the firewall block the vCO for different hosts data port that the server of vCO and maybe your admin workstation.

  Maybe another would be to program an original workflow workflow (to test, it can work as system).

• Unable to run the workflow using Startprocess?

  I created the button in the form. When I click on the button, I have to do my workflow to run. In the trigger pressed the button, I called the procedure
  Initiate_workflow with the code below.
  
  PROCEDURE INITIATE_WORKFLOW (V_REF_NO IN NUMBER)
  AS
  NUMBER OF L_SEQ;
  BEGIN
  SELECT XXWFBLKSEQ. NEXTVAL
  IN L_SEQ
  FROM DUAL;
  
  WF_ENGINE. CREATEPROCESS ('TRIALWF', L_SEQ |) » -'|| V_REF_NO, 'TRIALPROCESS');
  
  
  UPDATE XXWFBLOCK_I SET ITEMTYPE = "TRIALWF", ITEMKEY = L_SEQ | » -'|| V_REF_NO, STATUS = "WAITING WITH MFG DEPT'"
  WHERE TABNO = V_REF_NO;
  
  WF_ENGINE. STARTPROCESS ('TRIALWF', L_SEQ |) » -'|| V_REF_NO);
  
  COMMIT;
  END INITIATE_WORKFLOW;
  
  Update took place in the xxwfblock_I of the table, but the workflow started.
  
  What is the error? Am new to the workflow.
  Suggest me with the solution.
  
  
  
  
  Kind regards
  Mini

  Well, if there was a mistake, it would have error message in place on the form.

  How do you know that the workflow is not started?
  It is possible that even if the workflow is started you will not be able to see unless you have access to see her, please query the table of wf_items with your item_type and item_key if you find an entry in this table, so your workflow is started.

  -Tom

• Help! Problem when running CF under a default service account

  I am running ColdFusion 9 with IIS 7 on Windows Server 2008.

  The CF application service runs under a domain request account rather than the local default.

  The problem is when you are so defective models keep an indefinitely open active query.

  Is it a permission setting, I may be missing to resolve this problem?

  Thanks for any help anyone can provide.

  Charlie, thank you very much for your answer.

  We had only to read/write permissions for the account on the coldfusion9 directory. After changing to full control, the problem has been resolved.  Charlie, thank you very much for your answer.

• How to run the command-line IDC services

  Hey guys,.
  is it possible that we can run IDC Services from the command prompt.
  all your pointers will be greatly appreciated.
  
  Kind regards
  Sicard
  
  Published by: stephane on March 9, 2009 07:26

  Hey sapan,.

  You can use IdcCommand to perform the services from the command line. The procedure is the following:

  1 create a text file with service calls, you want to do, the definitions are had in format:

  LocalData @Properties
  IdcService = UPDATE_DOCINFO
  dID = 1
  dDocName = 000001
  dDocType = MyType
  dSecurityGroup = Public
  dRevLabel = 1
  dDocAuthor = sysadmin
  dDocTitle = my title
  @end
  >

  (Note: for multiple entries in the file > is very important)

  2. run IdcCommand from the directory "/ bin" of :

  IdcCommand f image_update.hda u-l c:\idccommand.log sysadmin

  Options:
  f = with service definitions
  u = user to run as
  -l (lowercase L) = location for execution log

  There is more detailed documentation in the presentation of the Idc (idc_command_reference_10en.pdf) commands.

  Hope that helps,

  Andy Weaver - Software Consultant
  Fishbowl Solutions< http://www.fishbowlsolutions.com?wt.mc_id="L_Oracle_Consulting_amw">

• Run the workflow using the SOAP API with PHP

  Hello

  I'm trying to integrate workflow from code PHP using the SOAP API to Orchestrator.

  <? PHP

  Try

  {

  $parameters = array (username = > "username", password = > "passwd");

  $client = new SoapClient ('https://vcoserver:8281 / vco/vmware-vmo-webcontrol/webservice?) WSDL "); "

  $result = $client-> getAllWorkflows ($parameters);

  foreach ($result as $item)

  {

  foreach ($item as $work)

  {

  echo $work-> name;

  echo "< br >".

  echo "id";

  echo $work-> id;

  echo "< br / > ';

  }

  }

  }

  catch (Exception $e)

  {

  echo $e;

  }

  ? >

  I do not see errors/exceptions, but don't see any output as well.

  Am I missing something?

  Could you use

  print curl_error($curl);
  

  After curl_exec to check if there are errors?

  If there is an error in SSL certificate, as ' SSL certificate problem: unable to get local issuer certificate ", you can either install certificates roots (Google it for more information how to do), or disable checking of certificates by peers in CURL with something like:"

  curl_setopt($curl, CURLOPT_SSL_VERIFYPEER, 0);
  

• How to change a title in the workflow Document Search service

  Hi all

  We used Search Toolbar webcenter taskflow portal to search for documents in the application of our portal.

  But the result of the search contains the title 'Documents (OOD_DEV)', our requirement is to change the part e.g. title Documents (OOD_DEV)-> content

  We have the Jdev - 11.1.1.6.

  could anyone suggest me how to change the title in the document search service?

  Thank you

  Nassim

  Yes you are right. so, I just changed the title element in the searchResultFragment.jsff based on condition, something as shown below

  Thank you

  Nassim

• How can I run the remote registry service in Windows Server 2003?

  original title: How do I run the remotley remote registry service? I'm unable to open a session

  I'm on windows 2003 R2 server, when I connect automatically to this topic still disconnects once, I'm remotley to change the registry, but the remote registry service does not work, how to run from a computer on the network, because I can not connect?

  Why you ask a question of Server Windows in a Windows XP forum?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Infrastructure and the workflow administrator

  I have two types of workflows that I need to run:

  1. infrastructure management.  These are things that Orchestrator has to do with the regular workflow.  They should not be dependent on the account active directory of an employee for authentication to vSphere, but rather a service account.   That's why I need to share a single session in my orchestrator configuration and run it all through this service account. (Unless I think bad - if so correct me)

  2. tasks of the administrator - these are things that must be run on an Ad Hoc basis by the directors of the vSphere environment.  Logging of who did what in vCenter is important and uses permissions and authorization implemented already in vCenter is important for these workflows, because there are different levels of permissions for admins of vSphere configured in vCenter which should apply when these types of workflow are running. So, I need to configure vRO to use 'session by user' instead of 'Share a single session' (unless I think bad - if so correct me)

  However, I can only configure Orhestrator to use 'user logs', or use 'share a single session', but not both.  How people have solved this problem?  This call to two facilities orchestrator, one for administrators and for infrastructure components?

  You may be able to create / remove the connection to host shared on the fly in your workflow to avoid exposing a connection in vCO.

  It's basically the way people made for vCloud Director where you need to have a connection by the organization.

  The other way is to expose workflows accessing a particular host only. You need actions by pulling on the lists of the VM at the start of a vCenter or help to specify a property of presentation of the root element.

  Once done, you can set permissions on the workflow.

  The third way is in your response. You can separate users by vCO...

  The suite is that you should have a special account that has sufficient rights to perform the Infrastructure Management and the use of session by user with this user.

  The first solutions are those requiring the most effort, while the those last less.