Run Vista64 installation without back to their original factory condition?

Is there a way to run a Vista64 OS repair without having to return to their original factory condition?  I cloned my HD 600GIG that came in my a6530f to a GIG HD 1000 Pavilion and uses the original HD as an external drive for backup using an eSATA interface.  After that I cloned the drive everything seemed to work fine until I've tried use a restore point in the system recovery.  There is no and I can not activate the restore point feature to create new ones.  I remember seeing a windows repair feature in one of the programs control panel but can't find the program now.

Because HP does not include the VISTA64 is install disk there a way to run reinstall and do a system repair only, as there was on my XP installation disc?  I don't want to have to buy a drive VISTA64 Premium from Microsoft.

Any help will be greatly appreciated.

Thanks for the feedback.  I finally got the RESTORE POINT CREATION for work by first making the properties of the hard disk the in administrative tools in the control panel and filling the hard drive New and Old.  Where are the control points located on the hard drive?  I want to see if the old restore points are listed.  The restore point has been working fine on the old drive... I ran two hours before I changed the discs.  I used the Paragon Drive Copy 9 to clone the disk... very cheap and very easy to use.

Tags: Notebooks

Similar Questions

  • Laptop HP 2000: I need to restore my laptop from 2000 to their original factory condition. No part of recovery

    My computer has been hacked October 30, 2015. I think it happened when I opened an email upgrade to windows 10. At that time, my computer has been transformed into a server and a network manager took over. While doing so, this person had deleted my recovery partition. Its taken almost a year to understand that due to the fact that I don't know a * beep * thing about computers. So here's my question: How can I get the recovery disk? I can't find anywhere on the HP website.

    Hi @millerlightning,

    Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how Post and more what is your specific model of 2000 HP notebook? Computers laptops HP - how can I find my model number, serial number or product?

    I understand that because of someone hacking your computer, you need to do a recovery, but they have deleted your recovery manager and you have not created a recovery media. You have checked the HP site but could not find the option to buy the recovery disk. Whether you use Windows 10 previously it will be registered with Microsoft. You can download the tool for creating Windows 10 media to load Windows 10 on a USB key. You can then use to install Windows 10. Tool for creating Windows Media 10 . Once this was accomplished, make all your Windows updates and download and install the HP Support Assistant . Now run the HP Support Assistant to facilitate updates of HP.

    To express gratitude for my post please click on theThumbs Up '' Icon'. ""  If my post solves the problem you are experiencing, please click 'accept as Solution' to help others find what worked for you!

  • So how can file formatting when installing printer, I return back to their original state.

    Original title: FILE FORMAT CHANGED AUTOMATICALLY AFTER the INSTALLATION of NEW SOFTWARE PRINTER HOW can I RETURN FORMAT ORIGINAL to RECORDS

    I just installed a brother p touch on my computer printer software and now all my folders automatically changed their format to account for the printer. who is a printer for adhesive labels. How can I get all my files back to their original format? I can do each an indivicually, but then, after closing the computer and re opening they come back to the new format of the thumbnail

    Thank you

    but finally managed to solve the problem

    tried to click on all the printers iconc

    except the one on the bar at the bottom of the screen

    from there I could change the default settng for printe

    new sticker fron brother printer

    to the old normal printer

    strange I couldn't do otherwise

  • How can I move files/folders to iCloud back to their original finder folder

    I just updated to OS Sierra and noticed that my documents folder was empty. How can I move files/folders to iCloud back to their original finder folder?

    Thank you

    The Duke

    See it - Add your files, Desktop and Documents in iCloud Drive - Apple Support

  • My files have been converted Documents HTML Firefox how to convert them back to their original type?

    Some of my files have been converted to HTML Documents, Firefox. I n 't know how. Can they be converted back to their original such as Excel, Word or PDF files format ^.

    Is it only the icon that you see for them or the file extension erred in .html?

  • Tabbed browsing has moved to the top of the browser (previous location was in the url field)... How can I put them back in their original location?

    Tabbed browsing has moved to the top of the browser (previous location was in the url field)... How can I put them back in their original location? I really don't think we need more details on this subject.

    Right-click on an empty space in the tab bar (or other) and uncheck the box "Tabs on Top" (Firefox > Options > [] tabs on top)

  • I've updated my Adobe CC 2015 originally installed applications, but the next day they're back to their original version 0.0.

    I work on a Mac Pro 10.10.5 Yosemite at the end of 2013. We were on the phone with Adobe for a couple of hours trying to update. They found that my creative cloud Installer was not up-to-date applications, so they have been manually updated. Came this morning, the next day, and they have all been restored to their original version. The creative cloud keep track of what the latest version is with the apps on my computer and reinstall this version if the applications have been updated manually?

    Hello

    Please, try the following steps:

    Kind regards

    Sheena

  • How can I return foxconn to original factory conditions

    I have a computer with foxconn card mother intel celeron d. I want to restore it to how it was when I bought it all first.  I know I'll lose all the files.

    The manufacturer of the motherboard is not important here.  What is important, is that if you bought the computer with a version of Microsoft Windows pre-installed, so one who sold you the computer was held under the terms of the Microsoft license to provide you with ways to restore the operating system.  These days, this "means" usually involves a hidden partition on the hard drive.  How does this restore mechanism depends on the manufacturer.

    So, you will need to consult the owner's (User Guide) manual or other documentation that came with the computer, or at least give his full name and his model.

    If you can get the replacement from the manufacturer of your computer software as it is no longer in activity, see http://support.microsoft.com/kb/326246

  • I think I accidentally restore my computer to its original factory condition and now I can't access my files!

    I have a windows vista

    Please elaborate on what you were doing. If, indeed, you have restored the computer to the State as delivered, your user files and applications that you have installed since it was first set up have been removed. They are not simply inaccessible, they are gone. There are various files and partition recovery tools, you could try; However, the disc was heavily rewritten by the restore process. The chances of success are slim.

    Tom Ferguson

  • Reformat my laptop to its original factory State

    Product: Pavilion DV6-1220TX

    Operating system: Windows Vista - Home Premium (32 bit)

    Hello

    Above are the details of my laptop, and I would like to know the steps to format my computer laptop, as shown in the topic above.

    I enter the Manager recovery and confused on the next step after pressing ESC Setup when I choose YES to "get back to their original factory condition.

    Here are the questions:

    1. as a result of measures to format continued to my statement;

    2 Advisor if I have to re - install the drivers after properly format my laptop and how to do it if necessary.

    3. Will the recovery partition remained after format;

    Looking forward to your response.

    Thank you

    Hello

    To answer your questions in order:

    1. details on reinstallation of Vista using Recovery Manager (including a video preview) located in the HP document here.

    2 all drivers you need will be installed as part of the recovery process.

    3 the recovery Partition will always be present.

    Kind regards

    DP - K

  • Can I reset or erase everything back to the original of the condition of the box?

    I'm running an insperon 1545 Dell w / OS;  32-bit Vista SP2 and IE 8 with Analyzer FREE Avast Antivirus and firewall of Defender.  is the free Avast AV said, some say that the free trial versions do not work as well as others.

    I was wondering if I can put everything back to their original state because I have some annoying problem on my system.  All the 20 min or so appears a window without normal borders, there is no tab at the top of the window with the Red Cross to close the window if alt F4 closes the window, it always reappears later.  The window shows "(i) this program can't display this webpage".  I was hoping that it could fix this glitch.

    I recommend the version of Avast FREE to my customers:

    http://www.avast.com/eng/download-avast-home.html

    Avast anti-virus is XP, Vista and Windows 7 compatible (32-bit and 64-bit Versions), FREE, auto update and a user of low resources from your computer.

    And, don't have 1 (one) anti-virus installed / running on your computer at any time.

    Conflicts, crash and freezing may occur if you have more than 1 (one).

    And for an Anti-Malware program.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Dell recovery options:

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    And that way if you have a recovery partition on your hard drive.

    See you soon

    Mick Murphy - Microsoft partner

  • My custom toolbars to chance to return to their original state

    8.0 running. and Windows 7. This problem also occurs with 7.0. Customize toolbars and randomly disappear customizations, and toolbars back to their original format.

    See:

  • How to convert DSB files to their original type file

    I did an emergency using Dell DataSafe backup.  Now all my files are on the C: as an ORD file.  How to convert them back to their original documents?

    Hello

    Since you used the Dell software to do the backup, contact Dell technical support

    http://support.Dell.com/

    or ask in the forums Support of Dell

    http://en.community.Dell.com/support-forums/default.aspx

  • shortcut for deskjet 8600 pro has disappeared. Re-run the installation program does not help. How can I get that back?

    When I bought and installed my Pro Deskjet 8600 in last July, a wonderful control program has been installed. However, the shortcut on the desktop for this program has disappeared, and I can't. Re-run the installation program does not help. How can I get that back. All I have now is an older version of the HP Solution Center, which does not have the features that I got into the habit of.

    Hello

    Uninstall the software by following programs > HP > HP Officejet Pro 8600 > Uninstall.

    Then download and install the latest version of the software below, it is a more recent software and should solve the problem you are experiencing:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4131&product=4323659&sw_lang=

    Shlomi

  • How do I start the installation of windows 7 started without back up

    How do I start the installation of windows 7 started without back up
    as I reinstall my windows 7, that the installation process has been abandoned that I forgot to plug in the charger and it now displays "windows installation was not completed. to install windows on this computer, restart the installation "How can I restart the installation..." i havnt made any recovery

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

Maybe you are looking for

  • Sending to values in a table when a record is

    Hello I display the elapsed time on the display panel.  I also have a button 'save' on the Panel and I want to take the current elapsed time value and write them on a spreadsheet.  Currently my code runs the elapsed time and resets to zero when I pre

  • HP OfficeJet G85 prints SLOWLY

    I use my printer for many years and it has been a great printer.  Just today (for no apparent reason) it started printing so slowly that it takes about 3 to 5 minutes to print a page!  I've tried several things suggested to the Board of Directors inc

  • Unable to download from a site of games

    I don't even know if this is the right forum but I can't download games on a site that I've always done until mid-December.  I put in the trusted sites and it displays "Unknown (mixed) Zone" and the screen freezes when I try to download. Does anyone

  • HP Laserjet Pro M277dw: feeder

    Is there an alternative tray for the printer HP Laserjet Pro M277?  The current Board does not take the amount of paper.

  • cannot access the files on USB

    Trying to access the files from a USB key, I get a message «...» I/o device error"I use the same USB in my computer work fine.