Run32dll.exe winbrand.dll and other errors

Similar Questions

• missing Ntoskrnl.exe and other errors when who reinstall windows 7 pro 64-bit

  I had windows installed on a HARD drive and received an SSD and I decided on the SSD HARD drive image, so I wouldn't have to reinstall. As I suspected it might that cause some problems and I decided to simply wipe the SSD drive and attempt to reinstall. I wiped the SSD and started my windows 7 Professional 64-bit SP1 DVD. It will pass through the first process (Windows loading files) with the screen of levels of grey and the downstairs, but subsequently loading bar, I get an error telling me that the ntoskrnl.exe is missing or damaged, and I have no option other than to try again to load the disc, or stop. I have another disc of Windows 7 Professional 64 bit I tried to use, and it gave me the same message. There are a few other errors I received, I do not at the moment, but as soon as I get some time and if I get them again once I will update the thread with this info.

  I also ran memtestx86 and there were errors with a specific location, but I just removed the RAM of this niche and I guess it should be OK after that. Am I wrong?

  I am the computer OEM. If I need to provide more information please let me know and I can accommodate.

  Thank you.

  The problem was with RAM. One of my 4GB DIMMS was bad. I removed and changed my poles autour needed and I could boot disk Windows 7 Pro and install correctly.

  A faulty RAM stick was causing the problem.

• Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

  Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.

  I have an existing Office RT system running RT 2009.  This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.

  Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.

  I also noticed that the message on the screen connected to the RT system during startup:

  "achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.

  Any ideas on this problem?  It is perhaps as simple as a switch in the compiler?

  Thank you.

  I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.

  I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.

• Stop action does not (and other errors) Please help!

  Hi all

  This is my first attempt at an interactive chart with flash professional.

  Work on a Mac (OS 10.8.5), Flash Proefessional CC.

  I created 6 frames, and I'm ready to start the animation. I want users to be able to click on one of the 5 buttons on the first image, this will lead to a corresponding frame that contains a bunch of buttons that link to external sites. Each of these images, there is also a button that links users to the first image.

  This should be very simple.

  The problem comes from the GET very go, I can't even control stop working [stop();] so when I test (Enter cmd), he just continually travels 6 images.

  I saw a forum where someone said that if there is a flash error will just ignore the script and scroll through the images. It seems really weird to me that Flash would just ignore if there is only one error in the script. Is this really the case?

  I had a few mistakes, but looking around on other forums I didn't understand what they meant.

  Here's what came:

  Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements. (125)

  Radial gradient (not oval) circulars are supported only.

  In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (3)

  Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system.

  So I won't be able to do anything whatsoever as long as one of these erros occur? If this is the case, other than Googling through a bunch of forums that may or may not explain things in language I can understand, does Adobe offer a resource to help users resolve specific errors? Another that the gradient, I have no idea what one of these facilities, and the search thorugh the forums did not help.

  What I'm trying to do should be very simple, but it gives me a lot of trouble. I went through a lot of Lynda tutorials, tutorials from Youtube and even Adobe Tutorials and I thought I was ready to start add actions, but obviously I'm missing something fundamental. Please help me!

  See you soon!

  Patrick

  I made an animation from scratch and everything has been published on very well until I added an audio file with a very long name - then I got the white screen. I removed, shortened, reimported it and viola... I had images- and his! Yay.  (I downloaded your file. Just shorten the library names did not do the trick.)

• RunDLL error loading C://ProgramData/nafugizu/nafugizu.dll and RunDll error loading C://ProgramData/wakemoza/wakemoza.dll start up

  Whenever I start my computer, I get error messages saying that the module could not be found, looked online to try to find that solution did not find much. Im not very savvy computer so not sure what to do next. A ran Norton full scan and came up with nothing.

  Hello ArmyWife09, welcome.

  These files are almost certainly infections. I would recommend following these steps:

  STEPS TO PREPARE THE SYSTEM FOR A CLEAN BOOT CLEANING AND MALICIOUS SOFTWARE
   
  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. click on the 'Startup' tab at the top
  4. click the "Disable all" button at the bottom and click on apply
  5 restart your computer

  6. Once restarted, download the following:

  http://download.CNET.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

  7. Once downloaded, install MalwareBytes and run a full scan of the system. Restart
  Afterwords.

  From this point, your machine must be clean of the infection.

  Let us know how it goes,

  Thank you!

• How to: Activate CS6 - key serial unrecognized and other errors.

  I have CS6 installed on a new installation of Mac OS x (Capitan).

  First of all, I can not activate the product, it has that many computers have my installation. It's really not correct. I have only a single installation on a computer.

  I uninstalled the software on the old installation of OSX.

  After entering the key to series of the screen again, I now get the error "invalid registration key. I checked and it is not true either. Series is correct.

  How to activate my product Adobe CS6?

  Or... How to change the list with think Adobe, the product is installed on the computers.

  If you have just uninstalled the product, but not to disable first then you have still two activations tied up.  You must contact the support by chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  Find the serial number of your Adobe product quickly

  Error "serial number is not valid for this product". Creative Suite

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

• 9 of DreamWeaver (CS3) - onOpen.htm and other errors

  Hello

  I've been using DW9 for a few years now.  And this week suddenly encountered errors that I couldn't explain.

  I was updating a library file.  When I chose to update all the files using the library file, DW started running through a folder and update of files I have never seen before (configuration/commands).

  I stopped the process almost immediately, but I think that the damage was done.

  Now wheneven I open a file, save a file, paste the code, try to use my SPry menu or almost no matter what else, I get an error.

  I have to click OK twice before the error disappears, and then usually DW what it is supposed to.

  Except with my SPry stuff.  They just don't do anything.

  EXAMPLE: -.

  When I paste the code, I get an error like this...

  "While executing onLoad in PasteFireworksHTML.htm, a JavaScript error occurred."

  When I opened one of my HTML or PHP files, I get...

  "While executing onLoad in design Notes_onLoad.htm, a JavaScript error occurred."

  There are many more like these.

  I opened some of these files in Notepad to see if I can see what is causing errors, but I don't see anything.  The files show also that they have been published and still show the original update of 2007.

  I can't work like this.

  Is there a solution?

  Found - had to do a little research

  http://helpx.Adobe.com/Dreamweaver/KB/troubleshoot-JavaScript-errors-Dreamweaver-CS4.html# main_known_errors

  Worked like a charm

• Always asked for the serial no and other errors

  I've been using Illustrator and Photoshop have been purchased and installed before I subsrcibed to creative cloud. Both have started giving me error messages and telling me to re - install. I tried to download them, got several errors. Finally Illustrator downloaded and installed, but then asked me my serial number rather than my creative cloud subscription info. Shouldn't I be bringing as applications of creative cloud with updates instead of purchasing function number? How can I get my previous software in the system of creative cloud? (By the way, it took three separate just downloads to get the installer to work...) I'm afraid that my Creative Suite system everything is screwed. Need help!

  http://forums.Adobe.com/message/5217310

• corefoundation.dll and applesync errors

  How can I fix without running the programs that load after they scan

  http://www.ProcessLibrary.com/directory/files/corefoundation/

  corefoundation.dll is a CoreFoundation\r belonging to CoreFoundation Dynamic Link Library of Apple Computer, Inc. \r

  http://discussions.Apple.com/thread.jspa?threadID=1949073

  It is a problem of Apple software.

  http://www.Apple.com/support/

  Link above is Support from Apple.

  See you soon.

  Mick Murphy - Microsoft partner

• Error loading C:\Users\Herb\AppData\Roaming\rvfet.dll AND load C:\Users\Herb\AppData\Roaming\usdms.dll error

  When I start my PC I get two dialog boxes with messages

  Error loading C:\Users\Herb\AppData\Roaming\usdms.dll
  AND

  Error loading C:\Users\Herb\AppData\Roaming\rvfet.dll

  It seems that some program trying to load at startup and can not find anything.

  Once I close the dialog windows everything works fine.

  Any ideas?

  Herb

  Hello

  Google has little information on this subject, it seems to be a left on the shape of the boot entry Malware that has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

• My ENVY 17-j092nr Notebook PC flicks or vibrates randomly on the log screen Windows and other software

  Im a pc user ENVY 17-j092nr Notebook PC (windows 8.1 with all the drivers) and the OS updates works very well, however sometimes im getting an annoying error that allows windows vibrates like crazy, the problem is a little weird to explain, it makes the BAR on explorer.exe folder flick and other executives 'content' of several software Firefox for example the top bar which is orange starts helpeless flick, or in vlc, it even move, and then the worst on the windows log screen, which makes my movies quick photo from the left to the centre several times per second, making it impossible to write any Password and its annoying when especilly simple pass off work (problem happens very often, but I'm not complaining here).

  The thing I've tried:

  -Change of mouse and video installation, screen, mouse and other dirvers in addition to their update.

  -With the help of build of Windows and external software trouble and repair ultilities.

  Updtading - OS (why? dk but I tried alternatives).

  -Electricity disconnection when this occurs (as sugested in other forums), did not work.

  -Clean the fan and avoiding any external particle on the laser mouse.

  Well well, not that im complaining about the laptop, which work very well over a budget, like it, it's just that the error which bug my HP to be good (if not perfect) experience, please someone help on this im looking forward to HP service work to help me fix this problem for good, is really annoying, especially when you try logging thx.

  I'm not Dunidar thank you for you time to grow another, I opened the cover of portable and yes I found a few in there, dead ants cleaned that upward I don't mind much about warranty or anything like that in any case thank you for your attention, you did a wonderful job help here , the problem has not demonstrated again the science I did it this morning so I think the ants where to do this kind of electric bridge I guess I DK much to this topic but, once again, thx for you excellent support cheers.

• Blue Screen Error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  original title: BSOD error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  Currently, I'm having a problem on a Fujitsu T1010 with Windows Vista x 84 installed tablet. At a random time that I use my computer, I get a generic blue screen with information DRIVER_POWER_STATE_FAILURE. The error code is 0x0000009F (0 x 00000003, 0x86f692e0, 0x86f692e0, 0x865a6598). BlueScreenView.exe, I see that the root causes are hal.dll + 997f and ntkrnlpa.exe + f5b28. So far, I've had 14 accidents. I run the driver verifier and the causes are hal.dll + 726c and ntkrnlpa.exe + 2ea5a7 windrvr6.sys + 0. Any help is appreciated! Thank you.

  Timothy

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Explorerframe.dll and Explorer.exe errors

  After receiving an update of windows, when I tried to start windows (I have dual boot with linux), I was given an error for "explorerframe.dll" and had to shut down my pc. I managed to fix explorerframe.dll and when starting windows for now, I was greeted with the error for explorer.exe does not. After doing a sfc/SCANNOW, I solved the problem, but to try to connect again, I was told that explorerframe.dll did not work properly. It is as if I am stuck in a loop with a work, then the other is not. If someone could help with these questions, I would appreciate the help.

  Follow these steps only thino you can do now is try to replace Explorerframe.dll.

  1.step- Run the command prompt(make sure that you run as administrator)

  2.step -in CP to enter this command takeown /f explorerframe.dll

  step 3- now we must find explorerframe.dll.Press Windows key and E, when you open my computer to high right field looking for explorerframe.dll

  -4.step Right-click on explorerframe.dll, go to Properties, go to the Security tab, click your user name, click CHANGE , and then select full control

  step 5- if you have Win7 64 bit make sure that u give full control to the explorerframe.dll in SysWOW64.

  6. step- you can now download and replace explorerframe.dll.

  If you are using WIndows 7 64-bit do the same for the explorerframe.dll in SysWOW64!

  If you can't find DLL download, send me message private so I download mine.

• Validation ERROR: C:\Program Files (x 86) \Mozilla Firefox\AccessibleMarshal.dll and do not install

  I downloaded and extracted the latest ESR (Version 10.0.7) file this morning. Run the SETUP program. EXE with no command line switch fails to install Firefox. SAT Setup log indicates that the installation took a second full run. In the Setup log, I see the following:

  Registration DLL

   ** ERROR Registering: C:\Program Files (x86)\Mozilla Firefox\AccessibleMarshal.dll **
  

  In the folder C:\Program Files (x 86) \Mozilla Firefox, there's an uninstall as well as an install.log file folder. Any other file or folder there. Mozilla Firefox will appear in programs and features, but displays an icon associated with an unknown application.

  I am connected with an account with limited rights but the execution of the INSTALLATION. EXE executable from an elevated command prompt. That should be enough to raise the registration of the DLL.

  Running on Windows 7 SP1 with all updates applied. I noticed several other people who have experienced this problem, but nobody has a solution.

  Thanks in advance for any help!

  Do a clean reinstall and remove the Firefox program folder before reinstalling a new copy of Firefox.

  • C:\Program Files\Mozilla Firefox\
  • http://KB.mozillazine.org/Installation_directory

  Download a new copy of Firefox and save the file to the desktop.

  • ESR 10.0.x Firefox: http://www.mozilla.org/en-US/firefox/organizations/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• DLL not found errors: 0x8007007E and 0x8007000B

  My application can not find my dll except on the PC where I have developed.

  On the target computer, I placed the dll in the same directory as the EXE file, but as soon as the program attempts to call a function in my DLL, it fails with error 0x8007007E HRESULT code, even if I specify the full path to the dll files in the source code.
  If I give the program access to the file from Microsoft msvcr100. DLL, and then I get a different error code 0x8007000B.
  The calling program is written in Visual Basic 2010 Express on Windows XP SP3 with .NET Framework 4.0.
  My dll is written in unmanaged C++.
  The target computer is also XP SP3 with .NET Framework 4.0.
  I hope that the program would be run on the target computer if I installed Visual Basic on it, but I want to solve this problem so that the program will also run on other machines.
  I've had trouble with this for days now and vain.  I searched on the internet and Microsoft Help but I understand not all the proposed solutions, none seemed to fit my problem anyway very precisely.

  Help, please.  Thank you.

  ADDITIONAL DETAILS

  Here's how I set up the interface to my DLL functions...

  Const DirectoryDLL as String =...

  ...

     

  Entry point: = "Components", SetLastError: = True, CharSet: = CharSet.Unicode, ExactSpelling: = True, _

  CallingConvention: = CallingConvention.Cdecl) >

  Public static void components (_

  ByVal P1 As Integer _

  ByVal P2 As Integer _

  ByRef R1 As Integer _

  ByRef R2 As Integer)

  "Leave this empty routine.

  ' The DLLImport attribute requires to be passed to the DLL, calls in this routine.

  End Sub

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://msdn.Microsoft.com/en-us/vstudio/hh388568.aspx