RUNDLL error loading wdhaprv.dll c:\Windows\. How can I fix it

Similar Questions

• sispower.dll missing. How can I fix it?

  sispower.dll missing. How can I fix it?

  Hello

  1. When you get this error message?
  2. Did you change the system before the show?

  Sispower.dll is a library of dynamic links for implementing power management of Silicon Integrated Systems Corporation SiS Power Scheme Library membership

  Try to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

• I continue to receive messages that COREFOUNDATION.dll is missing, how can I fix?

  I continue to receive messages that COREFOUNDATION.dll is missing, how can I fix?

  Hello

  ·         When exactly do you get this error message?

  ·         You have installed iTunes software on the computer?

  This problem may occur if the iTunes files or corrupted on your computer.

  Uninstall MobileMe from your computer via the control panel. MobileMe is uninstalled, you will receive is more this message.

  Or you can uninstall iTunes and then reinstall. Make sure that you install the latest version of iTunes. Currently, this is version 10.5.

  You can watch the following article of the Apple with the error message Corefoundation.dll not found:
  http://support.Apple.com/kb/TS2211

  If this does not help, you will need to contact Apple support.
  http://www.apple.com/support/itunes.
   
  Thank you, and in what concerns:

• I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

  I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

  Interestingly, if I copy and paste your images into a new doc 2 points scored.

  I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

• RUNDLL - error loading LXCTtime, dll

  original title: RUNDLL

  How can I fix rundll it appears whenever I start my computer I don't know what to do I do not know something is wrong... Please help thanks

  Hello

  Part of the Lexmark printer drivers. If you have or had a Lexmark printer then re - install the
  drivers. If you no longer use the printer and then subsequently properly, delete the printer.

  Add or remove a printer (Windows 7 is the same)
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  How to uninstall a printer from your Windows based computer
  http://www.ehow.com/how_2299771_uninstall-printer-from-Windows-based.html

  LexMark driver downloads
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  Search for the specific removal with LexMark Support instructions
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  =================================================

  If necessary use to remove the error.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Receive error message - the user profile service has no log on. Failed to load the user profile. -How can I fix?

  I CAN NOT LOG - ON

  I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I can't download PDFs from the internet because of an error on iexplore.exe running. How can I fix it?

  I have an error of execution on the iexplore.exe file.  The message is "the application requested execution to terminate in an unusual way.  I can't open download PDFs from the internet because of this.  How can I fix it?

  I have an error of execution on the iexplore.exe file.  The message is "the application requested execution to terminate in an unusual way.  I can't open download PDFs from the internet because of this.  How can I fix it?

  Use another browser.

  You try to view in the browser or that you get the same reaction if you right click and save the PDF file and open it directly.  If the work of the latter, uninstall your pdf reader, restart and reinstall the latest version.

• What is dkbjausr.dll - Rundll error loading: module specific C:\windows\dkbjausr.dll is not found

  When I boot Windows XP Professional Service Pack 3, I get a message:

  Rundll

  Error loading:

  C:/Windows/dkbjausr.dll

  Specific module could not be found

  Message is in a box with an "OK" button I click and the normal desktop screen.  Everything seems to work normally, but I noticed that IE 8 does not have certain things with other programs she before the above message.  IE 8 work, but some features are gone on some programs that run on IE8.  (but the functionality is there on firefox)

  What the heck is this message and that is that windows could not find the module?

  This kind of errors are usually because the registry trying to load a module/file that no longer exists, in your case, the "dkbjausr.dll".
  The file has disappeared, it is of a random filename probably against malware that had already removed the scanner, but the loading point is always present in the registry.

  Everything you need to do is remove the point loading, either by editing the registry or by using tools to remove.
  Try to uncheck the corresponding item in msconfig > startup.

  Or if you have the HijackThis program is installed, you can run it and difficulty of the relevant boot entry pointing to this file.
  http://free.antivirus.com/HijackThis/

  If you are familiar with editing the registry, here's the Startup registry keys:

  Just delete the value that points to the C:/windows/dkbjausr.dll

  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  HKCU\Software\Microsoft\Windows\CurrentVersion\Run
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnce
  HKCU\Software\Microsoft\Windows\CurrentVersion\RunOnce
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnceEx
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunServicesOnce
  HKCU\Software\Microsoft\Windows\CurrentVersion\RunServicesOnce
  HKLM\Software\Microsoft\Windows\CurrentVersion\RunServices
  HKCU\Software\Microsoft\Windows\CurrentVersion\RunServices
  HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  HKLM\Software\Microsoft\Windows Winlogon, Userinit

  There are other tools that remove entries redundant reg, let me know if I can be helpful with your Hijackthis log.

• RUNDLL error loading rsewmsay.dll

  Hi, whenever I start my PC, I get a window stating error loading C:\WINDOWS\rsewmsay.dll

  How can I stop this?  Is this a problem?

  How it was caused?  I think remember me it beginning to happen after I restarted my PC after that Windows Defender has a problem and told me to restart.

  Thanks Stuart

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can still find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that systems currently has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Repeated RUNDLL error loading icsecpi.dll

  Hello

  I usually do not restart the computer daily and put it into hibernation. When I noticed a slowness in firfox browser, I restarted the computer. After reconnecting I started having this error popup every 20 seconds. He says: "Error loading c:\windows\icsecpi.dll" access is denied.

  I have tried rebooting, but nothing helped. Downloaded and run the "Microsoft Fix It' it's finished, saying"failed in the process. "

  Help, please.

  Thank you
  Swami

  When I googled for icsecpi.dll, the only results I get are links to your message. Therefore, you should start with the basics and make sure that the computer is clean.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware
  MS - MVP - Elephant Boy computers - don't panic!

• I connected my hp desktop for samsung tv, but when I try to start windows it shows loading then windows past mode not supported unless I have load in safe mode. How can I fix it?

  How to load windows normally?

  See the following topics:

  Connect your computer to a TV - Windows help

  also:

  How can I connect my Windows PC to a TV? - Topic

• I'm trying to update my computer and I get an error message A 8024, 006. How can I fix it?

  Can not install updates because of unknow error 8024 A 006.  Help, please

  Hi jacmgod,

  I can't find a reference to this error code. Can you tell me what kind of update you tried t? In the meantime, I can offer some general troubleshooting tips. First of all, run chkdsk from your pc to correct possible errors in file:

  Run Check the disk:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. at the command prompt, type the following command and press ENTER: chkdsk /r

  4. If the request to run at the next reboot, typeand press ENTER.

  5 restart your computer

  Here is another tool to fix corrupt system files:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. at the command prompt, type the following command and press ENTER: sfc/scannow

  4. when the scan is complete, test to see if the problem you are experiencing is resolved.

  Finally, do a clean and start to see if cn you do the update:

  Clean boot

  Test in an environment clean boot to see if this problem is related to the interference of other programs / services:

  1. click on Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  5. click on OK.

  6. When you are prompted, click restart.

  7 log on to your account.

  ---------------------------------------------------

  If the problem does not reappear when your computer is in clean boot mode, a background program probably causes interference. You can try to determine which background program is causing the problem when the computer is in clean boot mode.

  ---------------------------------------------------

  To find the process or program to cause follow the steps from half of the points Services allow, in the following article:

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use

  http://support.Microsoft.com/kb/331796

  ---------------------------------------------------

  To restore your Normal startup:

  1. click on Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  2. on the general tab, click Normal startup.

  3. When you are prompted, click restart.

  ---------------------------------------------------

  Stay in this mode and keep stable your computer until you experience the same problem, or it works long enough you know that you are experiencing is, after that you can restore to a normal start and give us your results.

  (Clean boot run your computer with minimum interference of any program or service that are not linked windows).

  Post here if you continue to have problems and give us a little more information as to what you're trying to do. Thank you

  Dave D.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got more than 50 error messages in Event Viewer. How can I fix these problems?

  Between 3:45 am PST and 5:46 am PST, I found more than 50 messages of error in Win XP Home Ed.  SP 3, event viewer.  Can someone help me to solve these problems, please.

  First of all I would like to clear you all events, right-click each of the topics and choose erase all entries, you can save if you wish.

  Then run checkdisk:

  Here's how to make a bootable xp recovery console cd

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Disk-Defragmenter-has-detected-that-CHKDSK-is/397271a9-2417-4261-8fc7-145678b6a876

  read the response of L. Elder

  It is easier to run from the recovery console as it will mean less restarts, but you can go to start, run, type CMD and press ok

  in the cmd prompt box type chkdsk c: r, and then press enter

  Type a y for Yes to run at the next reboot, and then press ENTER.

  Then restart your pc, allow checkdisk run and complete, if errors are found and fixed, then run again until no errors are found.

  You can view the report in the event viewer, Applications, Winlogon.

  After the last checkdisk you run, then check the most recent errors that are listed after the last checkdisk.

  How many are there now?

  Your reply message, please include the following information:

  current antivirus

  brand, model and model number

  Click Start > run > type or paste msinfo32 > OK. Copy and paste the content in your response.

• its deleted by error in Add Remove hardware. / How can I fix my sound?

  How do to restore sound to my computer somehow deleted sond in Add Remove hardware in Control Panel. any suggestions?

  Hello

  Do you see an 'x' mark on the sound icon in the taskbar?

  
  You can visit this link and use the troubleshooting described in the article steps.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• get the error code 49 downloading bridge.  How can I fix it

  I get the error code 49 downloading bridge.

  It seems that Adobe CAT is non-existent.  Can anyone help?

  If Windows , go to . C: > Program Files >. Adobe > Adobe Bridge cc.

  launch the bridge CC cc Adobe Bridge folder.

  If Mac , launch Adobe Bridge cc from the Applications folder.

  Once the bridge CC application is launched, exit Creative Cloud Desktop app.

  In CC Bridge menu, click the option " help to ' .

  Then select updates .