RUNDLL Exception you try to run "shell32.dll, Control_RunDLL hotplug.dll.
When I use a flash drive into my USB connection icon appears in the lower right corner of my screen, as usual. When I open it to remove the device to the USB port I click on the device, click on stop, press on enter he stands up and says OK to remove the device safely. Then it happens immediately with a box entitled RUNDLL and in the box, it indicates an exception occurred while trying to run "shell32.dll, Control_RunDLL hotplug.dll". I click Close MessageBox and remove the USB device. The connection icon from there. I opened this new and it shows my DVD player. The icon will not disappear until I told him to stop the DVD player. When I make the DVD player disappears from windows Explorer. I restart my computer and the DVD player comes back but the fact the connection icon. Can someone tell me what to do to fix this?
My OS is XP Pro SP3 current on all updates.
My laptop is Dell Latitude D630c
Hi Seanmichael60,
We are pleased to hear that you were able to find a solution to the question and I thank you for the information provided. Do not hesitate to contact us, in the case where you face other problems in the future.
Tags: Windows
Similar Questions
-
I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."
Please can you help me?
Original title: AdvrCntr6.dll
Hello.
There is a guide for fixing here:
http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm
-
Original title;
Linksys wmp54g & windows vista
When you try to run Linksys Wireless Network Monitor I get the following errors:
Cannot load ProcNICs.dll
Failed to load Res_dll
Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.
Any suggestions?
Thank you.
Hello
I suggest you contact Linksys for assistance:
http://home.Cisco.com/en-us/home
Linksys Support link:
http://homesupport.Cisco.com/en-us/support
I hope that helps!
If you need help on Windows, please keep us informed.
We are here to help.
-
you try to run a program, but he repeats to me that the program requires "" MSVBVM50. "." DLL"which is no longer available on this version of windows?
The program you are trying to run has been programmed in Microsoft Visual Basic 5.0.
Depending on your operating system and architecture, install the files of running Microsoft may solve your problem:
http://download.Microsoft.com/download/vb50pro/Utility/1/Win98/en-US/msvbvm50.exe
If they are unable to install, or if it does not, this program is not compatible with your version of windows.
Then your only option to run the program on this computer is virtualization or decommissioning.
I hope that the executable files will help out you!
-
I extracted to the terminal linux firefox in my own repertoire and you try to run the executable file called firefox. But he's saying "command not found".
You seem to have 64-bit Linux because Linux versions served on mozilla.org are 32-bit.
FTP://FTP.Mozilla.org/pub/Firefox/releases/21.0/Linux-x86_64/
-
Error when you try to run an application that worked when built with 8.6
I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6. Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009. The error relates to the Mean.vi. He claims that he can't find it. The error I get is as follows:
Error loading VI 'NI_AALBase.lvlib:Mean.vi '. LabVIEW support 3 error code: could not load façade. I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code. Please answer as soon as possible because it will quickly start to the impact of my calendar. Thank you.
Hello!
The same problem ?
I talked with my local OR technical support team. The application now works without any problem.
Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.
Best regards.
-
Get "communication error with kernel" message when you try to run a virus scan program
Get "communication error with kernel" message when you try to run a virus scan program
Hello
What antivirus do you use?
Follow the steps in the article mentioned below and check if this solves the problem.
The error message "error communicating with kernel":
http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280 -
Error when you try to run Quicken 2011: this program is not supported under XP
Win XP pro - Quicken 2011
I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP. What I do toget Quicken supported?
For help on Quicken, I recommend posting your question in the community live Quicken . The people there can help you better as we can in this forum of Windows. Boulder computer Maven
Most Microsoft Valuable Professional -
Error code 0 x 80248014 when you try to run MSE Update on Vista 64 bit OS
Tomb guard Windows Update crashes when you try to run the Service Pack 1 for Vista 64 even if it seems to have installed service pack when I view installed updates. Update the window continues to show the service pack update according to availability. So far, I ran it three times and he shows as installed three days in a row, but he does not appear in the properties view and continues to show an available update when I check for updates.
It's a little confusing because the error code 0 x 80248014 appears when you try to update to MSE, so there seems to be two issues. The MSE error one and two, the apparent success of the installation of the Service pack 1 for 64 bit Vista Home Premium but not appear in the properties view and always appear when checking for updates, even if each attempt to install appears to be successful.
Hello
Run the system update tool
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool
Retry the update
Reset the Windows Update components
http://support.Microsoft.com/kb/971058/en-us
Error MSE - which describes the boots s. is what will do the above tools.
-
When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors. How can I me then chkdsk to run
Hello
See if these two tutorials to help you with this.
"How to run the check disk at startup in Vista or Windows 7"
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
"How to difficulty Chkdsk will not run at startup in Vista"
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html
See you soon.
-
Check on a friends computer; It can run internet explore unless she added as an administrator. you try to run any .exe gets this pop asking what program to run this title? It could be an association of .exe that is messed up, or is it probably some strange virus? I tried to install IE9, I was able to download but are unable to run.
Start here (especially if you are not familiar with the UAC in Vista & Win7)-online http://windows.microsoft.com/en-US/windows-vista/User-Account-Control-Overview
-
8024A 000 error code when you try to run Windows Update on Vista 32-bit
I get the above error when you try to run Windows Update on Vista 32 bit.
I use an Asus laptop and have used the Asus recovery cd.I just replaced the old HD (500 gb) as it failed with a 750 GB HD.I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".Any help would be greatly appreciated.Thank youSamThanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.
See you soonSam -
When you try to run a system recovery I get this error; OxcOOOOOOf
Original title: error OxcOOOOOOfMy laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."If you do not have this disc, contact you system administrator or computer manufacturer for assistance.
File: \Windows\system32\winload.exe
Status: OxcOOOOOOf
Info: Seelected entry could not be loaded because the application is missing or damaged.
It does not work. Suggestions and no, I have not modified before the crash.
I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?
Hi Anthony206,
Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).
From now on, you can only contact OEM for the use of the recovery feature.
I hope this helps.
-
Code of State 800070663 when you try to run Windows Update
I get the State 800070663 code when you try to run Windows Update. The update fails. Someone at - he encountered this before?
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
-
5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
Setup could not create the directory
c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
Error5: Access denied
In the Temp folder under Security I have:
'SYSTEM' with full control
"Administrators" with full control
"Username" with full control
All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
The two latest downloads gave the same error message.Thank you for your time.
DebbieI suggest you do this:
1. click on the start planet.
2. type cmd.exe in the search box.
3. press on Ctrl + Shift + Enter
4. click on "run as Administrator".
5. type the following commands exactly and press ENTER after each:
takeown /f "%Temp%" / rCacls "%Temp%" / t/c/g "%nom user %": F System: F
(Enter Y when you are prompted "Are you sure?")
Maybe you are looking for
-
Hello I don't use much Spotlight for research because it does not show the location of what you are looking for while does search window thingy in the upper right. Or am I missing something? The best Elmer
-
I see many have a problem with the standing calculation on Apple Watch and it sews a lot are sitting down and getting up when the clock tells them without it recording the time of rest. I also have this problem. However I worked in a café and several
-
Since there is no default rule, I have to create rules more than necessary and some rules may conflict. Is there a way to set priorities for the rules so if conflict rules, the higher priority rule is enabled?
-
Smartphones to blackBerry ringtone stops when removed case
The phone rings normally at the desired volume at all times EXCEPT when it sounds so that in the case and delete it. He then stops ringing for this call only. It sounds normally on any other appeal, whether in or out of the Holster. Only when it ring
-
Cannot install Windows 7 ultimate on hardware RAID
I have three 1 to HARD sata drive, in the card mother Gigabyte GA-Z77-DS3H. I did HDD1 as no raid and two others as mirror leads to the BIOS level using control RAID Utility. But when I try to install Windows 7, in the last step of the installation,