Rundll32.exe application error. ref 0x010017f1 to 0x10000003c memory. memory could not be read

Similar Questions

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read".

  Message MSVidCtl broadcast system receiver: ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read". This error will not go away and I can not disable or delete the file. How can I stop it?

  Hi SteveGHowe,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to disable and re-enable the Media Center service and check:
   
  a. Click Start. Click run.
  b. type: services.msc and press ENTER.
  c. find Service Media Center Receiver.
  d. right-click on the service and click on stop.
  e. restart the computer and follow the same steps of 'a' by 'c '.
  f. now right-click on the service and click Start.
   
  Also, try the steps listed in the following link:
   
  Troubleshooting steps I use for Media Center component registration failure error

• BTStackServer.exe - Application error, the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read

  Sometimes my computer will display a "BTStackServer.exe - Application error' window that reads:"the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read. When this error POPs, within seconds the computer just turned off completely and I have to turn it back on. As a first step, it rarely happened, but now it will be pop up and stop a little less than 5 minutes to restart the computer. I have a Lenovo x 201 running Windows 7 PRO, and two sticks of 4 G of ram. I tried reversing the two RAM sticks from one location to the other, but that has no effect. Would it still a problem with the RAM sticks? I have the latest version of Norton Security and it shows no virus. If anyone has any ideas, what could be the cause of this it would be appreciated.

  Hello Kevin,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your time.

  Before reinstalling Windows, I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us updated.

  Thank you

• Error "StartRep.exe education for 0xfc1fceb4 application error memory references 0 x 00080000 memory could not be read.

  Original title: New RAM

  I tried to update my 16 GB RAM in a Dell Studio XPS. The computer except the RAM, but Windows 7 wouldn't start. I got the failure message is "StartRep.exe application error.

  The statement to be made 0xfc1fceb4 reference memory at 0 x 00080000.

  Memory could not be read. »

  Is there any solution for this? RAM cards I have installed designated, they were compatible Windows 7 and are right for my machine.

  After several attempts, I took my machine to get fixed. The problem with all the errors I had were 2 of the new ram sticks were bad. I had to replace them, and now all is good. Thanks for your help.

• Why do I get the jqsnotify.exe - Application Error Application error. The memory could not be read?

  Why I get this error message every time I opened Firefox saying: jqsnotify.exe - request error and then at the end of the line, he says: the instruction at '0x5ff3d322' referenced meory to '0xe41203c3 '. The memory could not be "read". Click on OK to terminate the program.

  This has happened

  Each time Firefox opened

  == I recently renewed and installed CA Security Suite and Firefox uninstalled and reinstalled again.

  http://www.java.com/en/download/help/quickstarter.xml - what is Java Quick Starter (JQS)? What is the advantage of running JQS? -6.0

  Disable Java Quick Start extension: Tools > Addons > Extensions
  Control Panel > Java > Advanced tab > various > Java Quick Starter (disable)

• I get the message: "svchost.exe - application error__the instruction at '0x001a3ae7' referenced memory 0x00000000__the memory could not be read."

  Original title: svchost.exe - application error__the instruction at '0x001a3ae7' referenced memory 0x00000000__the memory could not be read.

  error svchost.exe - application

  the instuction at '0x001a3ae7' referenced memory at 0x00000000 the memory could not be read

  Click ok to finish, click on Cancel to debug

  No matter who I click it freezes my computer

  How can I fix it?

  This error is as malware... Hmmm.

  Try this malicious tool by MSFT remover:

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  Also, I found a little interesting tool:

  How to determine which services are running under a SVCHOST. EXE process
  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  THIS should give us a LITTLE more information.

  Young people and learning... Have mercy

• Error: "error btstackserver.exe: 0x0054be37 error, 0x000001ef memory could not be read" before the shutdown.

  Original title: Btstackserver causing error computer turns off.

  It began on 15 September after downloading a video game and starts when you try to run the game, but has since broke outside to play the game, even after I uninstalled it.

  The error message that appears before the judgment reads: "" btstackserver.exe error: 0x0054be37 error 0x000001ef memory could not be read. ""
  My laptop close instantly and is unable to start for a few minutes at least. Once a blue screen occurred on startup asking to allow the troubleshooting begin, that I authorized. There is however, no solution found by the computer. I tried several solutions, including running a system defrag and cleanup and uninstall the game. As part of my laptop gets unusually hot at shutdown, I also inspected the area and cleaned the dust of him in an attempt to eliminate possible physical obstructions.
  My laptop is an Asus N61jq age of two years and I run Windows 7 x 64.
  Any help is greatly appreciated.

  After you perform a clean boot several times, I determined the problem with the Steam client set. I also seek to their site of support for similar problems and followed through the steps of support described in this page: https://support.steampowered.com/kb_article.php?ref=1274-UOHK-5653

  For now, this seems to have fixed the problem, but I'll post here if the problem persists.
  Thank you very much for the help!

• Application error memory could not be read 0 x 00000014

  Hello world

  I would like to know if any of you have experienced this problem.

  I run an application built by me in a computer with LabVIEW Run-time 9 in which I display a PDF file using an ActiveX control:

  

  The target computer is running Adobe Reader 9.0.  Everything works perfectly until the application is closed.  From time to time (almost most of the time), I have the following error in windows:

  «Application error: the instruction at "0x0ffd609c" referenced memory at "0 x 00000014".»  The memory could not be "read".  Click OK to complete the program."

  Try to find the reason why, I found a few forums who say that the reason is a bug in Adobe 9.0 (in fact, I tried to run the application with Adobe Reader 8 and I can't make the same mistake).  Someone of you have had this error before and found a solution?  These links were not on LabVIEW and I have no idea how to get around this problem.

  Any help is happy.

  Thanks in advance.

  Dani

  Who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.

  It seems that, somehow, LabVIEW and other programming tools, hang around with this version of Adobe (I guess it is because of this bug) when the reference to closing Adobe created by the ActiveX container.  That the solution will be closing "by hand" this reference, then saying Windows to release the whole relationship between the application (LabVIEW for us) and Adobe.  The idea is that when we did with VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:

  -process all Windows messages currently in the queue of messages (.NET: System.Windows.Form.Application-> DoEvents)
  -run CoFreeUnusedLibraries in "ole32.dll".

  

  I hope this information can help someone, I lost too much time to understand this (eventually find the answer in an Adobe forum!)

  P.S. P.S. for those who program in c#, check out this link; He was my source.

• isqlplussvc.exe memory could not be read error

  I get an error "isqlplussvc.exe memory could not be read error" at windows xp startup which is very confusing!
  
  If I remove the file:
  C:\oracle\product\10.2.0\client_2
  
  The error disappears by all my holiday of ODBC connections.
  
  If I put the rear backrest, returns the error...
  
  Advice greatly appreciated!
  
  (And some explanations about why there is a client_1 folder as a folder client_2!)
  
  Thank you!!

  It is you need or use iSQLPlus? Or you simply annoyed by the message. You can disable the startup automatic iSQLPLUS during OS reboot in the Panel--> Services. If you need to use iSQLPlus then try to fix it. But iSQLplus must be running on your server not your customer.

  You had client2 and client1 is because you installed Oracle client twice at any given time. Check your connection ODBC see what ORACLE_HOME they use. If you only need one, uninstall one of the Oracle client.

• Svchost.exe Instruction at 0 x 0000000, memory could not be 'read '.

  Application error - svchost.exe Instruction at 0 x 0000000, memory could not be 'read '. My PC crasches is frozon

  You must identify which application was using svchost.exe when the error occurred?

  What you were using at the time? The error occurs on a regular basis? How long between errors?

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  It is always sensitive in this situation to achieve a malware check.

  Download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

• Error - the instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read". Computer Windows XP freezes when online.

  Original title: svchost.exe - Application error.

  When I'm online I get the error message appear as follows:

  Svchost.exe - Application error

  The instruction at "0x7c923845" referenced memory at "0x00000000". the memory could not be "read".

  Then my computer freezes

  Don't know what triggered it on my machine, I do not use 'messenger' , but I discovered that it was something to do with Windows. I have a Toshiba laptop, I finally ran the process of "adding value to products" using their 'product recovery disk '.  It took hours to reload everything and download the updates after the hard drive has been re-configured, but it seems to have solved the problems that I had with.  Radical solution, I know, but I'm not a "geek" so was becoming more frustrated with the constant "freezes" and poor performance.  I can only assume that my Windows XP system had somehow been corrupted.  It's all working fine now, fingers crossed!

• Error 990 - memory could not be read

  At the launch of Flash Professional 8, the following application error is generated as shown in the splash screen are the initialization of fonts:
  
  990: Flash.exe - Application error
  The instruction at "0x6172676f" referenced memory at "0x6172676f". The memory could not be "read".
  Click on OK to terminate the program.
  Click on Cancel to debug the program.
  [OK] [Cancel]
  
  With each uninstalling and reinstalling Flash numbers change error and the memory location address.
  
  Everyone knows this error and have a solution? Reinstall & reboot has not solved.

  I had a similar problem with Flash MX 2004, and it turns out be related to a problem in Quick Time. (I was also unable to play all QuickTime files, then you want to check that your side to troubleshoot your cause as well).

  QT has been so damaged on my system, I could not even uninstall it using the normal methods. Our IT Department had to manually delete everything on my system related to Quick time. After that, I have uninstalled/reinstalled Flash and reinstalled QuickTime, and everything has been fine since. (In fact, I've upgraded to v8 since then...)

  Initially I thought that my problem was a police corrupt, since it is in the part "load fonts" from the start, but Sir that fixed the issue of the prothrombin time. I have worked with the technical support of Macromedia (at the time), but cannot find the e-mail thread.

  UPDATE:

  I found the former topic, here are the relevant message of Support from Macromedia, which has led to the resolution:

  ««I'm sorry to hear that you are still having the same problem, I have been evaluating the said forum thread and I think I remember something on the issue of Player QuickTime.»» For some reason, old or broken in QuickTime can also cause Flash malfunction as the Flash needs for some operations.

  I recommend that you download the latest QuickTime, uninstall your current version, restart and install the new QuickTime Player, then uninstall and reinstall Flash using the same routine I provided earlier."

• RecoveryMgr.exe, the memory could not be read.

  RecoveryMgr.exe - 'the instruction at 0x8000d030 referenced memory at 0x0012ac60. The memory could not be read.

  Hello world!

  I was trying to reinstall Windows 7 Edition home premium on my HP Pavilion dv7-2280eo, when I was prompted with this message.

  I had previously deleted my entire hard drive by mistake, trying to Chrome OS and Windows 7 dualboot.

  So, naturally, I tried to run the BIOS recovery, but nothing helps.

  I then remove Chrome OS by formatting the hard disk (quick format) a Fedora live USB, I had laying around.

  So now I'm trying to reinstall Windows 7 through my HP recovery disks, but this error message does not seem to let me pass. Is there something I can do?

  I fixed it!

  Alright. I thought I might as well make a step to step guide for people who in the future may face the same problem I had.

  1. download MiniTool Partition Wizard Bootable. ISO file. (Download herepage, choose the one at the bottom of the page.) (Bravo @ CherylG for the download link.)

  2 create a bootable CD with the. ISO file using any CD/DVD burning software you have. (Or if you have not, you can download imgburn for free here ) (Once again, Bravo @ CherylG for the download link.)

  3. make sure that your boot order is correct.
    Even if it should automatically start, seeing that you currently do not have any BIOS operating system start to, as in my case, you might have to move your CD/DVD drive to the top of your boot priority in the BIOS.
  

   

  4. make sure you have a wired ethernet (CAT5) cable. For some reason any MiniTool Partition Wizard does not start without a wired internet connection.

  5 start the MiniTool Partition Wizard.
  In my case, I deleted all the partitions on the left, while I knew that I wasn't wasting any space to keep all the files in my failed experiment of chrome. Essentially, you want to have a completely unallocated * HARD drive, if it wasn't what you started with. Now create a FAT32 partition *, covering the entire HARD drive, so that you just now had a large FAT32 partition. Now, go ahead and format this partition, again, using parameters of FAT32. Now go to general > output

  * Unallocated space appears as gray in the MiniTool Partition Wizard
  * Apparently NTFS does not work with the recovery discs. It must be FAT32.

  6. now when you start your PC using your HP (Disc 1) recovery disks and click on recover to factory settings windows and accept the agreements and the following warnings.

  7 feed on your computer, your HP recovery discs until he did install.

  8. enjoy your freshly recovered computer.

  
  I hope this helps someone in the future! And if you really wiped out your entire hard drive accidentally drive, (like me ~ ~)
  Don't forget, the failure is the first step to success!
  

  -AkTheTimelord

• Error message: "the instruction at oxo656edab referenced memory at oxo6d20e8. The memory could not be read', play Pogo games.

  Original title: Pogo games

  I'm playing a game on pogo and when I try to activate a games, this warning comes up and won't let me play a game.  The warning States the following, "the instruction at oxo656edab referenced memory at oxo6d20e8.  The memory could not be read.   Help!  What should I do

  Hello Barb,

  1. you are trying to play games online?

  2 are you facing this problem when you play Pogo games?

  3. what web browser do you use?

  If you use Internet Explorer, then try the work around described in the following article:

  You may receive an error "memory could not be read" message when you click certain Web site links in Internet Explorer 6

  You can also read the following article and check if it helps.

  Internet Explorer is slow? 5 things to try