RUNDLL32. EXE. FILE NOT FOUND...

Similar Questions

• When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found.

  Original title: rundll.exe error

  I checked the previous messages and can't seem to find a solution to this problem.  Recently I ran 3 different scans, i.e. sbybot, avast and Malawarebytes virus. After that I ran these anti-virus programs and remove viruses, I was not able to open any more virus scanners. Every time I tried, would open a window saying "Choose the program you want to use to open this file." If I try to download a new virus scanner, it says the same thing.

  When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found. I checked this file on my c: drive\system 32 and see the rundll.exe file. I also copy and pasted the file rundll.exe my CD of Windows XP in c: Windows\System32

  Everything else seems to work fine on my computer, and I get no message on the rundll.exe file when the computer starts up first.

  Any help would be popular!

  Hello

  You rename regedit.exe regedit.com?

  Remove from my computer-> tools-> file-> option-> view tickmark for "Hide extension for known file types"-> ok-online local disk now C:\WINDOWS\

  Regedit.exe search

  Make a right-click Rename regedit.com

  From start-> Run Type & -> regedit.com-> ok.

  and follow the registry path IE: HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command

  I hope this helps.

• C:Windows/system32/rundll32.exe - Application not found - OK__I get this error message when you try to open a program

  Error messages occur now - seem to appear now, after I did a Defrag.  If I try to open AOL, it brings me to a display list who wants to choose from a list of programs.  For AOL, I click on AOL.  I didn't used to have to select from a list of display.  Then I tried to open an Astrology program and it took me to the same list, which of course is not.  Now, I get the same error as follows: C:Windows/system32/rundll32.exe - Application not found - OK

  Here's a Plan:

  Goto, start system restore restore Menu\All Programs\Accessories\System Tools\System

  Now select the oldest Restore Point and restore your computer, but first make sure that you have an external drive.

  After that C:\Windows\System32\Rundll32.exe copy the external drive and the disc is ejected

  Open the system restore and undo restore

  After the undo operation is copy the Rundll32.exe in the road to C:\Windows\System32

  and the problem solved

  Note: the rundll32.exe should be missed recently and you should have an old Restore Point which contains a file Rundll32.exe Intact

• Receive an error rundll32.exe "application not found" is anyone knows a solution for this problem?

  Occurs when you try to get on the internet with Internet Explorer, and many of my programs give the same error message when you try to open them. Some will be always open, but most will not.

  Hi FermanHowell,
   
  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
   
  To resolve this issue, follow the steps listed in the article below:

  Cannot find the Rundll32.exe file when you open Control Panel

• C\windows\system32\rundll32.exe application not found

  whenever I try to open an app in the Control Panel, the above message appears.can someone offer advice on how to fiz this because I know very little about these amazing machines. Thank you.

  Hi tonypartners,.

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Method 1: Follow the steps mentioned in the article below

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  If the problem persists,

  Method 2: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Debug problems using EPCO, zipalign.exe file not found

  Hello

  I am trying to debug an application of CRG using EPCO in an emulator or a device, but an error message in the console:

  free sign:

  [echo] Signature final apk...

  [zipalign] Running zip align the final apk...

  BUILD FAILED

  C:\Users\Jampa\workspace\LunaMAF\MAFeclipse\.main.android\bin\build-Android.XML:232: The following error occurred during the execution of this line:

  C:\Program Files (x86)\Android\android-sdk\tools\ant\build.xml:1139: the following error occurred while executing this line):

  C:\Program Files (x86)\Android\android-sdk\tools\ant\build.xml:1156: the following error occurred while executing this line):

  C:\Program Files (x86)\Android\android-sdk\tools\ant\build.xml:335: Execute failed: java.io.IOException: cannot run program "C:\Users\Jampa\workspace\LunaMAF\MAFeclipse\.main.android\bin\${zipalign}": CreateProcess error = 2, El sistema no can find el archivo especificado ("file not found by system"))

  I have installed:

  -Oracle Enterprise Pack for Eclipse

  -Android SDK:

  > Tools, Rev 23.0.26

  > Platform-Tools, version 20

  > Build-Tools, version 20

  > API 19 (4.4.2).

  > API 17 (4.2.2)

  The platform of my system is Windows 7.

  I hope someone can help me!

  Hello

  You can try the following?

  In the repertoire.main.android/bin under your editing project open build - android.xml and make the following changes:

  line 235 Add the--build-dependency of configuration as shown in bold:

  line 228 similar change:

  Note that there is a very preliminary difficulty and that he needs tests because it can have other side effects and may not work with the SDK of 22.6.

  Thank you

  -Raj

• C:/Windows/System/32/rundll32.exe - application not found. ____

  When I try and open any application on my PC, I get the error message "choose a program to open this file with. I have not even that by trying to open the cmd window or all the apps in the control panel. I think I have a virus, but can not run any antivirus programs as they all won't open no - needs an application to open it with. I can not open IE. I copied the file rundll32.exe from another machine, but that has not solved the problem. I had the "XP security Suite" virus which I have tried to clean with the help of several anti-virus software. Can anyone help?

  Using Windows Explorer, try to navigate to \Windows\System32, right-click on cmd.exe, then choose open. If that doesn't work try to use the command.com program. Now, type assoc .exe = exefile and press ENTER. You may have to restart the computer.

  Then run MBAM.

• error on startup: "error loading ozujufuxuzedesuv the specified module rundll32.exe is not found."

  I only get the error at startup code. "error in loading rundll32.exe ozujufuxuzedesuv the specified module cannot be found"

  You have a virus or other such pest or it could be the remnants of a pest that has been deleted by your AV software  Run a Malwarebytes and SUPERAntiSpyware scan on your machine and see if things change.

  http://www.Malwarebytes.org/
  http://SUPERAntiSpyware.com/

  John

• After the closure of Windows XP on my medion Tower desktop computer it now primer not. The message I get is Retten.exe file not found.

  I have a Medion Tower Office that, like fine until this last time, I closed Windows and now won't start or switch to safe mode recovery mode, ect., the message I get is unable to find the retten.exe file. It will not allow even me to re - install Windows xp from the disk that came with the desktop computer. Can any help?

  Thank you

  Hello

  ·        You did changes to the computer before you shut down the computer?

  You can try to boot from the CD and perform a disk check, and check if that helps. You will need to change the boot order in the BIOS (Basic Input/output System) and check if that helps.

  Warning: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Start Recovery console, and then run the disk check. To start Recovery console follow the link below.

  http://support.Microsoft.com/kb/314058

  Note: To start the recovery console, you need the Windows XP installation CD.

  Once you start in the recovery console, follow the link to perform the disk check.

  http://support.Microsoft.com/kb/315265

  You may need to contact the manufacturer for support.

  http://support.medionusa.com/

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• start-up in win xp that I got the error as "system3_.exe" file not found, search... what kind of error is? Please help me.

  I searched a lot on the internet, but nowhere I found the solution, if you can solve it please reply post.

  Something you installed was not installing correctly.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx --> here

  Install Autoruns, then run it.  Wait until the analysis is completed (as shown in the lower left corner) and then click on the tab 'connection '.  Browse the entries in the right column ("path of the Image) for an entry that includes"system3_.exe ".  When you find it, uncheck the box at the left end of the line and restart your computer.  The error should appear is no longer.

  If you can't find "system3_.exe" on the connection tab, click the "all" tab.  Then click on file > find to search for "system3_.exe."

  I would be interested to learn what caused this particular problem, so when you find the entry, please right click on it and select copy.  Then paste an answer here.

• error-17500 when you use the version selector and the toolboxinstaller.exe file not found since the deployment of ts3.5

  Whenever I run the version selector to switch between ts4.2 and 3.5, it displays the error message above and gives also advice how to fix for a version of visual studio, I do not have (I am using 2003). As well as this when I start the deployment of TS3.5 engine I get error message with toolboxinstaller.exe system.io.filenotfound. I know that they are then tried to repair/reinstall nothing works, any help would be greatly appreciated thanks

  Hi Elizabeth,.

  The message below is similar to the message that you receive (note that this message relates to Visual Studio 2005, you could relate to Visual Studio 2003):

  

  This is a known issue with Version TestStand selector and was reported to R & D (#171620). The picker Version TestStand assumes that when Visual Studio is installed on the machine, that Visual C++ has also been installed. It tries to write in Visual C++ specific files that do not exist if Visual C++ is not installed.

  This error does not mean that something is not necessarily, it is more a message that the file cannot be written in successfully. You should be able to continue to launch TestStand successfully without problem.

  On the deployment utility, I suppose that the two issues are related, however, it would be much easier to say for certain that the error you receive won't cause problems if you post a screenshot of the error. You can do it.

  Thank you!

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• To start XP message get this file xyv.exe is not found.

  QUESTIONS OR COMMENTS
  Message: XP on startup, I get a message this file C:\Documents and Settings\user\eyv.exe is not found. I can't find what program calls this file. A computer search found the following instructions in the file named setupapi.txt under C. Windows.

  2011-01-03 08:11:30 1464.596]
  # 199 Executing "C:\WINDOWS\explorer.exe" with command line: explorer.exe 'C:\Documents and Settings\User\eyv.exe '.
  #W383 'certclas. PNF"migrates: PNF language = 0409, Thread = 1 c 09.
  [2011-01-03 10:44:54 1480.923]
  # 199 Executing "C:\WINDOWS\explorer.exe" with command line: explorer.exe 'C:\Documents and Settings\User\eyv.exe '.
  #W383 "FONTS. PNF"migrates: PNF language = 0409, Thread = 1 c 09.

  It seems that explorer is looking for info on commissioning.

  QUESTIONS OR COMMENTS
  Message: XP on startup, I get a message this file C:\Documents and Settings\user\eyv.exe is not found. I can't find what program calls this file. A computer search found the following instructions in the file named setupapi.txt under C. Windows.

  2011-01-03 08:11:30 1464.596]
  # 199 Executing "C:\WINDOWS\explorer.exe" with command line: explorer.exe 'C:\Documents and Settings\User\eyv.exe '.
  #W383 'certclas. PNF"migrates: PNF language = 0409, Thread = 1 c 09.
  [2011-01-03 10:44:54 1480.923]
  # 199 Executing "C:\WINDOWS\explorer.exe" with command line: explorer.exe 'C:\Documents and Settings\User\eyv.exe '.
  #W383 "FONTS. PNF"migrates: PNF language = 0409, Thread = 1 c 09.

  It seems that explorer is looking for info on commissioning.

  "EYV" seems to be part of a known Trojan virus.  Messages like the one you usually arise when your antivirus application or any other anti-malware partially removed the malware, but left in place the room calling the main malware.

  You may be able to find that trying to launch eyv.exe when connecting using Autoruns .  There is a lot of information presented in Autoruns; focus on the 'Connection' tab

  I suggest that you scan your computer with these tools free anti-malware:

  MalwareBytes Anti-Malware

  SUPERAntiSpyware

  eSet Online Antivirus Scanner (Read the FAQ)

  And you might consider changing your antivirus application.

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• File not found error with msiexec vcredist_x86.exe extraction fails.

  Hi guys,.

  I can't extract the Redistributable (vcredist_x86, vcredist_x64) for VS2010 so that I can access the msvcr100.dll. This works, however, with the redistributable MS2008.

  My approach is as follows. I have download the distributable from http://download.microsoft.com/download/C/6/D/C6D0FD4E-9E53-4897-9B91-836EBA2AACD3/vcredist_x86.exe in downloads. I run

  C:\Users\xxx\Downloads>Vcredist_x86.exe/extract: "C:\Users\xxx\Downloads\vcredist_x86" / passive/quiet

  She extract vcredist_x86 as you can see:

  C:\Users\xxx\Downloads\vcredist_x86>dir
  Volume in drive C has no label.
  Volume serial number is 3ECA-A709

  Directory of C:\Users\xxx\Downloads\vcredist_x86

  25/03/2015-15:00

  .
  25/03/2015-15:00 ...
  25/03/2015 15:00 1028
  25/03/2015 15:00 1031
  25/03/2015 15:00 1033
  25/03/2015 15:00 1036
  25/03/2015 15:00 1040
  25/03/2015 15:00 1041
  25/03/2015 15:00 1042
  25/03/2015 15:00 1049
  25/03/2015 15:00 2052
  25/03/2015 15:00 3082
  20/02/2011 11:42 16 118 DHtmlHeader.html
  20/02/2011 11:42 88 533 DisplayIcon.ico
  25/03/2015 15:00 graphs
  20/02/2011 11:42 7 308 header.bmp
  20/02/2011 13:12 ParameterInfo.xml 8 958
  25/03/2015 Setup.exe 78 152 15:00
  20/02/2011 11:48 SetupEngine.dll 808 280
  20/02/2011 11:48 SetupUi.dll 295 248
  20/02/2011 11:42 30 120 SetupUi.xsd
  20/02/2011 11:42 41 078 SplashScreen.bmp
  18/02/2011 23:42 144 416 sqmapi.dll
  20/02/2011 11:42 14 246 Strings.xml
  20/02/2011 11:42 36 342 UiInfo.xml
  19/02/2011 23:05 4 224 705 vc_red.cab
  19/02/2011 23:08 vc_red.msi 163 840
  20/02/2011 11:42 309 032 watermark.bmp
  15 file (s) on 6 266 376 bytes
  13 dir 34,405,273,600 bytes free

  Can I do

  C:\Users\xxx\Downloads\vcredist_x86>msiexec/a vc_red.msi/qb TARGETDIR = "C:\Users\xxx\Downloads\vcredist_x86\msvcr."

  And it begins to extract the msi file, but then I get the error

  "Error 1308.Source file not found vcredist_x86\install.res.2052.dll. Check that the file exists and that you can access.

  with the option again or cancel. Because the file does not exist in fact I cancel it. I'm doing something wrong?

  Thank you

  Hello

  If you cannot add, update, or remove a program on your computer, run this utility for troubleshooting.

  https://support.Microsoft.com/en-us/kb/290301

  Retry the installation or to perform a clean boot, and then try to install again.

  http://support.Microsoft.com/en-us/KB/331796