Running a Seq file when running the GUI (command line option) return an error

Similar Questions

• How to deal with the plugin command line options?

  Hello

  I am currently working on a plugin c ++ for Adobe Acrobat 7 with the version 7.0.5 SDK.

  I let the user opens a specific pdf file by clicking on a link in the browser.

  to this end, I signed an additional protocol in the windows registry. Works very well.

  But now, I mean my plugin for specific things when calling acrobat.exe in this way.

  So is it possible to get the specified command line parameters given to acrobat.exe Self?

  It would also help if my plugin can be added with URL parameters.

  I could also use.

  I found nothing on this issue.

  Kind regards

  Sebastian

  No, your plugin does not access to the command line.  Look for other methods of IAC (COM, DDE, memory shared, shared files, etc.).

• Run the VI command line in Windows 7

  I try to open a VI and do it run whenever called from the command line.  I am running Windows 7 and LabVIEW 2009.

  I followed this guide to get me started.

  First, I marked my VI "run the opening:

  

  I therefore call on my command prompt similar program:

  "C:/Program Files/National Instruments/LabVIEW 2009/LabVIEW.exe" "C:/User/Desktop/test.vi"
  

  If I already open LabVIEW and running in the main menu, then it opens my VI perfectly without any problems.

  However, if I don't already have LabVIEW open, it opens LabVIEW as she normally does, but it only loads to the main menu.  It doesn't load any of my VI.

  Does anyone know if this is expected behavior, or how can I fix this so that it opens upward Although LabVIEW is currently closed?

  Well... I managed to do work haha.  If you come to ignore the document and open the file via the command line, it opens fine.  I don't know why they say that you can use the command line argument LabVIEW.exe.

  "C:\User\Desktop\test.vi"
  

• "Error: unknown protocol: c ' on the install command line + launch, after 'Throw error' on FB4 install + launch

  Just try to get AIRHelloWorld.as installed and launched on the Simulator, and I encountered some problems.

  With the help of FB4 (v4.0.1), I get the following by following the instructions at http://docs.blackberry.com/en/developers/deliverables/21877/Testing_your_application_from_FB4_134713...

  for the configs of type "Run", he pretended to install and launch, but does nothing. ".

  for the launches of type "Debug", after he sat down to "Waiting for Adobe Flash Player to connect to the debugger" for awhile:

  "The launch has failed."

  "Failed to connect; session has expired.

  Ensure that:

  1. you have compiled your Flash application with debugging on

  2. you run the debug version of Flash Player. »

  The advice of the thread here - http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Launch-Failed-Launching-Error/m-p... - I went to try from the command line with the following command:

  > blackberry-airpackager-bin-debug package AIRHelloWorld.bar - installApp - launchApp - C AIRHelloWorld - app.xml AIRHelloWorld.swf - device 192.168.152.128

  That I get:

  "Error: unknown protocol: c.

  Any help is appreciated.

  Alrighty, for those who wish to learn from my mistake, do not use the default path to your workspace in Windows XP. Place your project files in a path that has no spaces in it. Otherwise the code that reads XML application descriptor will throw and give you this completely useful message on the "unknown protocol".

  For more information...

  According to SUN ( http://bugs.sun.com/view_bug.do?bug_id=6506304 ), it's a regression of jdk1.5, so it can be bound to the version of Java that was used to create the blackberry airpackager. My recommendation to any dev BBPB watch this forum is to use another (earlier? Since jdk6 won't necessarily be released because of the Oracle) jdk for the set of tools... you know, if you want to support default Windows XP installed and you have the time. The solution is pretty easy once you know.

  Alrighty, now off to see if things work!

• How to run the linux command line sql script

  Hi all!
  
  Just quick question. On my server I have to install the crontab script which will be eexecute some sql statements.
  How can I undergo command which will execute the script file without asking for password?
  
  
  sqlplus user/pass... and then what?
  
  
  Thank you
  
  dlugasx

  sqlplus user/pass @yourscript.sql

• "Cannot run the script at line 1. File or folder does not exist. »

  Whenever I have start AfterEffects, I get an error as he is looking to find my recent projects.  The error is as follows: "unable to run the script at line 1. File or folder does not exist. "I haven't changed the location in one of my project files.  It's the same external drives that I use for months.  When I click on OK the same window opens several times and then finally the historic window opens completely blank and empty.  I am able to reopen projects however since the RECENT PROJECTS drop in the top bar.  It is a very strange and disturbing behavior.  In addition, I always use 13.7.2 because when I go to update it is impossible to connect and gives me this error.  I sat with Adobe support for an hour today, and we couldn't understand.  As I am in the middle of major projects, I decided to not update, but this error at startup is very worrying.  Someone has an idea of what could go wrong or how I can fix this?

  Thank you very much for your time.

  -Fredo

  

  Ok!  Just got a response and an Adobe technical support solution.  The problem is that there is a problem with these versions of sequels (and I found the same problem in first to my horror this morning as well!) and the last couple Mac OSs.  The solution is to close the window "library".  It is then normally.  Apparently they fixed in the last update, but I found the same problem on my second computer, which has been updated.  Anyway, if anyone has this problem, close your cc library window.  Voila.

• I wanted to install the trial version of indesign creative cloud cc. and sucsessfull. but when I want to run the program it just a massage of error: Error 11. I tried many things on aldready support center, but there is no s

  I wanted to install the trial version of indesign creative cloud cc. and sucsessfull. but when I want to run the program it just a massage of error: Error 11. I tried a lot about aldready support center, but there is no solution. Can you help me?

  Hi Ninat43034799,

  Please uninstall InDesign CC to your machine using the cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  After that, reinstall the product of your creative cloud desktop application.

  Let us know if this was helpful, waiting for your response.

• On the system restore running the message says "system not restored" and error 0 x 80070005 is given - how to solve this problem & get sys restore running again?

  Original title: on the restoration of the system running the message says "system not restored" and error 0x80070005 is given - how to fix & get sys restore running again?

  A ran the system restore, it goes through the entire process, then said "System Restore does not restore the" files etc, nothing has been changed.

  Error 0 x 80070005
  All + ve help would be appreciated

  Hi Rodianna,

  I know you've tried some of these steps... but try this exactly showing how. First one marked 'reply' then the following below this one.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-system-restore-error-code-0x80070005/11c3f465-559d-4F35-B8B7-9bc010972247

  Let me know what happens.

  B Eddie

• Zombies RAC 7 while running the top command

  Dear experts,

  I have server integrity Rx3600 2 numbers + oracle RAC 11.2, HP - Ux 11iv3 in a RAC.

  Node 1 is currently active, and the high command does not display any zombie process.

  But when I run the above command on node 2, is showing 7 zombie process.

  and the whole zombie has same id oracle 8891 emagent.

  Please suggest how to attend to this problem. Therefore this zombie should be zero.

  Kind regards

  Cecile

  I was checking that all processes on server support. I got the information from other departments to shut down the server in case of emergency. After the reboot, all the zombies disappeared.

  I'll check above such procedures in the event of zombies detected on the server.

  Thanks for all the support.

• Portege R600-108 - the tool to run the TRIM command to improve the performance of SSDS

  Hello

  We have a couple of R600-108 with SSDS, they run Vista Business 32-bit.

  I was wondering if there is a utility I can download to run the TRIM command on drives to improve performance?

  Thank you

  James

  Hello

  To be honest I m not an expert in the increase in performance of the SSD, but according to the Wikipedia article, TRIM has been implemented in Windows 7 and Windows Server 2008 R2 and came out with the final versions of these operating systems in October 2009.
  It seems former SSD drives have firmware updates, otherwise the new command will be ignored.

  According to Wikipedia, there are utilities that can send TRIM commands manually.
  These utilities are available from various manufacturers such as Intel or G.Skill.
  http://en.Wikipedia.org/wiki/trim

  You can consult the Intel tool called "Intel Solid - State Drive Toolbox and Optimizer".
  http://download.Intel.com/support/SSDC/hpssd/SB/intel_ssd_toolbox_fqa.PDF

  I hope this helps a little

• In bulk to rename files in a folder by using the DOS command line or a batch file.

  Can someone help with this problem, please?  I remember seeing the DOS command line to do a mass renaming of files in a folder or a batch file. for example, vacation photos are all in the format DSC00001.jpg to DSC001234 and I want to change it to something like, say, Rome0001.jpg to Rome1234.jpg.

  How about this:
  Go to the folder of your files in that.  Create a text file, and open it (Windows should use Notepad, that very well).
  in the file type:
  Ren dsc*.jpg rome*.jpg
  Now, save the file as:
  renamethem.bat
  (Make sure you call it ".bat" and save it as a txt document, which will make a simpel file and not add a strange formatting)
  From there, just double-click this file and it renames all your pictures accordingly.
  :)

  Old timer

• When installing the adobe reader software, I get database error: 2003

  When installing the adobe reader software, I get database error: 2003. Wat is to do

  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-reader-installation-Windows.html

• Audit of the process command line

  Someone had a bit of luck with Windows activation command-line process audit as indicated in the article: https://technet.microsoft.com/en-us/library/dn535776.aspx

  I tested this out on a Windows 7 system of teacher to see how the commands executed via the command line are saved in the case where newspapers. I was able to allow all parameters of strategy, as stated in the article however from the test I noticed that not all orders are saved. For example del, rename, and copy commands are not counted while the other type of sys-admin commands (ipconfig, netstat, nslookup, etc.) are being saved. My question is does anyone know why these commands are not counted since according to the example in the article, they should be? Is this normal?

  Thank you

  'Start' is an internal command to the shell.

  You do not say so, but I suspect that you have not run the previous commands at the command prompt. You have executed from within a batch file, which is another way to invoke a shell.

• I get an error message saying: "command line option syntax error. Type the command /? assistance. "

  I'm running Windows 8 preloaded on Sony Vaio and when I try to install the latest update for Atheros Bluetooth Driver Quelcomm, I get an error message saying: "command line option syntax error. Type the command /? assistance. "

  Help, please!

  I followed your instructions, I did not read the comments below first, I change the TEMP and TMP to C:\Temp, it's ok to forget it or do I needed to switch back? But I forgot to copy the original. If I need to change it back, can give me the original code to stick it on the TEMP and TMP, I use Sony Vaio sve14128cb WIN 8.1. Thank you for helping me.

  Dear all,

  I got other way to solve this problem, and it was mentioned by Mr. Vijin.

  If I'm not mistaken, the error message will be show after you go to update your driver Qualcomm Atheros Bluetooth Vaio update version.

  My way is very simple and maybe you can give it a try. Just go to the Google Web site and key in the version that you want to update. Please select the site Web is Sony's main page.

  Or you can visit the official site of Sony for your country, go to 'Support' and key in the version on the area of research and research.

  You can try link below also but I bother it's a newer version for your computer.

  http://www.Sony.com.SG/support/download/554324

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.