Running Fedora core 6 Satego P100-10U would become very hot

Hi all

I run Fedora Core 6 on my laptop Satego P100-10U. But there is a problem using
NVIDIA-Driver. After a few seconds, running Fedora laptop gets very hot.
NVIDIA sensors show me a temperature about 100-112 degrees.
Is there a solution, how can I fix?

Kind regards
Johann.

Hello

As you probably know Toshiba designs and publish own graphics drivers for Toshiba laptops the graphics drivers are not the same thing as the original graphic drivers of manufacturing such as nVidia or ATI graphics card!
Graphics drivers from Toshiba are changed in order to avoid overheating of the graphics cards!

Usually, the books don't provide any special graphics card modules but only the module cooling CPU cooling and so the laptop graphics driver controls the performance of the graphics card.

If the temperature rises to the critical level the driver slows down the map decreases the temperature and heat production.
Drivers Nvidia or ATI of origin don't feature such support!
In my opinion, this is a reason why the card temperature rises to highest level!

Attention, something like that could damage the graphics card!

Tags: Toshiba

Similar Questions

  • My V5-571 CAREB is extremely slow at startup and would become very hot gel frequently

    My laptop CAREB 571 V5 running on Windows 10 is extremely slow at startup and becomes very hot, gel frequently.

    I recommend reloading the windows to see if it helps the slow and freezing. If it is not the case, I suggest that you contact technical support for repair options. I am including the instructions below to reload Windows without losing any data.

    http://Acer.custhelp.com/app/answers/detail/A_ID/37335

  • Cannot install drivers LAN and Wireless Lan on my Satego P100-10U

    Hi people =)

    II just reinstall WIndows XP Professional on my Toshiba Satego P100-10U.
    I downloaded all the drivers from the Toshiba page and he burned them on a CD.

    I inserted the CD in my computer and installed most of the pilots. But for
    a stranger strange reason drivers network such as LAN and Wireless Lan
    drivers do not work!

    Can someone help me?

    Don't work or you can not install them?

    LAN driver must be installed manually because there is no setup.exe file. Go to an unknown device in Device Manager > properties > driver installation and navigate to the folder where you extracted the driver files.

    Please let me know if it works.

  • Satego P100-10U - driver with Windows 7 problems

    Hello!

    Also recommended by Toshiba, I installed Windows 7 64 bit on my laptop for Satego P100-10u. However after doing that I encounter the following problems:
    -There is no noise even if the audio device driver (Conexant high definition Smart Audio HD2) appear to be installed.
    -the SD card is not recognized
    Unfortunately I have not found all the Windows 7 drivers in the download area of toshiba for these devices driver.
    Can someone help me please?

    Thank you very much and greetings

    Gunnar

    Try please install the Vista drivers. They must work.

  • Satego P100-10U - can only use 3 GB instead of 4 GB of RAM

    Hello

    I have a Toshiba Satego P100 Notebook 10U (Modell Nr.: PSPAME - 004002GR) and now I have done an upgrade of RAM of 2 GB of RAM to 4 GB of RAM. My problem is that my Windows 7 64-bit and my 64 bit Ubuntu, do not use the full 4 GB of RAM. The OSs show me that they are 4 GB inside, but he can already use the 3 GB. BIOS has been updated to v. 4.80 and nothing happened.

    Please help me if it is possible in German. My English is not very good see you ;-).

    Thank you

    Björn

    Hey,.

    How much RAM will be recognized from the BIOS? He sees the full capacity of 4 GB?

    Theoretically, it might be possible that some memory is reserved and used for other hardware components like graphics card or something, but if the BIOS detects the whole capacity everything is ok.

  • Unknown device on Satego P100-10U

    First of all, sorry for my very bad English :-(

    I install XP and now the system to say that I have an unknown device and a PCI device without driver. I think one of them is the sound card, but I can't install the rather. "Device not found" is the message. And I can not find drivers for it. If anyone knows what I can do, please help me... :-)

    Hello

    For me it s a clear case Oliver. The device could not be found error message appears because you have tired to install a bad driver.

    Satego P100-10F seems to belong to the PSPAME series.

    Therefore, you need to download the drivers for the laptop PSPAME! Be sure that you have chosen the right set to 100%!

    PS; I recommend you download the drivers from Toshiba European page because AFAIK the Satego has been designed for the European market.

    Best regards

  • Satego P100-10U - no sound through speakers or headphones

    Hello

    I have a problem with the Audio on Windows device. I can't hear on headphones or speakers. It runs thin 2 days ago and since yesterday, I have this problem.

    What can I do?

    Karsten

    Hello

    You see a yellow exclamation point in Device Manager? Maybe the driver doesn t work properly and must be reinstalled you can download it here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    By the way: which OS do you have?

  • Satego P100-10U: CPU overheating all playing 3D games

    Hello!

    I often play games like call of Duty4, Counter Stri * ke Source, FEAR Combat etc with my Toshiba laptop...
    After a few minutes, the game, the CPU send a warning: CPU overheating!

    With the right tool brand CPU my CPU temp. is greater than 95Celsius!
    If I am not under my laptop a few CDs or books on the corners to make a place for cooling, the laptop crashed because the CPU is overheating...

    This problem is only if Iplay 3D games.
    If I'm working from write something 'normal' like surfing on Internet, watch pictures or listen to music, the temperature of the CPU. between 60 - 70Celsius...
    What can I do? Service call?

    Thnx

    Hello

    As you know this laptop was equipped with high-tech parts and devices that are really very powerful. During these games to 100% devices and produce a lot of heat. This is why it is very important to a cooling properly.

    Please check if the cooling modules are free! I mean the dust and debris could prevent fans of good working condition and would have led to overheating.
    In most cases the coolant cleaning module could help to prevent the overheating of laptop computer
    To clean the fans, you might use a jet of compressed air that can be bought in various computer stores

    But I have a question;
    Using the graphics driver from Toshiba?

    Maybe you installed a 3rd party graphics driver which doesn t support protection against overheating! He should know that the original Toshiba graphics drivers are slightly modified. The GPU driver supports thermal protection which prevents the overheating GPU chip is very important and necessary, because portable computers, graphics cards do not have huge cooling modules like graphics cards for desktop PC!

    Therefore, use of the 3rd party graphics driver could lead to overheating.
    Be aware of these facts.

    Best regards

  • Update the BIOS via broken WinPlash SATEGO P100-10U. Now just black screen.

    Hello

    I did an upgrade of the Bios via WinPlash as I installed the XBox Live. Upgrading the Bios did not work (stupid me) and therefore, I'll have just a black screen after that I have turn on the monitor. The machine emits no beep, nor does it show anything else.
    I have subsequently:
    Downloaded the WinPlash on another PC. As it says in the doc (unziped in a folder), but the file '... ". for bootable CD"is not generated (nothing else that the files have been copied).
    Subsequently I have burned (all files = part of Vista 32 Bit) with NERO on a bootable CD, but it does not start the program (CD starts spinning, LED in CD / DVD flashes yellow then it stops).
    Then, I only copied their executables on a USB key, tired to load it from there - ZERO nothing but the sound of the screens black and fan.

    Tried to access the Bios with combinations of power sur-bouton ' "+ ESC, F1, F2, F10, F12, Del, ALT (as the left of the SPACE key), CTRL.

    Could someone tell me if there is a start-up tool or a BIOS image tha starts, or a special touch?

    Concerning
    Thomas

    Hello

    so, you have little chance really bad because this issue needs to be repaired by a qualified technician. I had a similar problem and have searched for a few weeks for a resolution quick and good cheap but I couldn t find anywhere these tools mentioned you´ve.

    Your only chance to bring the machine back to life is to contact a [ASP (certified partner) | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT]
    and allow them to correct this problem. I asked a lot of people here, but no one from toshiba is here to give some nice tools... :(

    Hope that your machine will come back to life.

    Welcome them

  • Satego P100-10 heatproblem Debian

    Hello!
    I have a Toshiba Satego P100-10U and installed Debian Linux on it. From the beginning I had a lot of problems, for example my sound worked not etc. I solved most of them, but I still have a big problem that I can't find a solution.

    The laptop heats up! I can't even hear the fan operation. In fact, I think that it doesn't...

    I searched the Internet and found something on a module called "toshiba_acpi.

    "To check if the ACPI and Toshiba ACPI support is activated check the following proc entries are:

    / proc/acpi
    / proc/acpi/Toshiba

    If they do not exist, FnFX will work on this system. If they do not exist, try 'modprobe toshiba_acpi' as root. If it throws errors like ' FATAL: Module not found toshiba_acpi ' probably, the kernel is not compiled with CONFIG_ACPI and CONFIG_ACPI_TOSHIBA. »

    Well, the module is here, but:

    toshiba_acpi modprobe $
    FATAL: Error inserting toshiba_acpi
    (kernel/drivers/acpi/toshiba_acpi.ko /...) : no such device

    This error, I found this on the internet:

    This driver does not work on all laptops Toshiba, particularly those models who seem to have a BIOS or other firmware that was not developed by Toshiba himself. New reverse engineering work needs to be done on these machines, or Toshiba will have to disclose the details. The error that you will see in this case is ^ ^

    Until we do people? I love this phone, but I do not use it with windows, I would be really grateful if someone could help me please...

    Thank you very much!

    Hello Harry

    What to say? If you really think that there is problem with cooling, you must communicate with the service and see if the cooling module is defective. To use Linux or Windows is not relevant. Important is that the laptop should work fine and hardware components must be cooled to avoid overheating and equipment damage.

    I recommend you contact the service. The warranty is applicable and all will be repaired free of charge.

  • SATEGO P100-490 replace DVD player

    The optical drive on my SATEGO P100-490 is becoming worse and worse.
    It started with delay, while that to watch DVD movies, now, sometimes same CD cannot be read.
    So I guess it's a problem with the hardware with the player, a Panasonic UJ-850.

    I was looking for alternative and in general I found a lot of UJ - 850.
    But often the seller indicates that an update of the "master set" firmaware is necessary to operate in systems Tosiba.

    So my questions:

    Can wher I get this firmware update?
    What model of car I can use?
    SATEGO is the same satellite?

    PS: I am running WIN - XP on this machine.
    I'm going to buy a new machine soon, so I spend more than EUR 100 for the repair.

    Thanks much for any help.

    > But often the seller indicates that an update of the firmware "master set" is necessary to function in Toshiba systems.

    It is that not all readers are compatible and so you should contact the ASP in your country before buying a CD/DVD drive guys could provide some info which drives are compatible

    > Wher can I get this firmware update?
    Firmware is installed and you will not get any special firmware of Toshiba.

    > What model of car I can use?
    See above, you can get ASP.

    > Is identical SATEGO satellite?
    I think both sets of laptops are very similar, there is a difference between some parts of hardware such as HARD drive or video card, but available to any computer laptop seems to be the same

  • Fedora Core 14 and 2.6.35.6 - 48.fc14.x86_64 kernel, VM server 2.0 "running kernel does not.

    I tried to install VMserver on fedora core 14 with linux kernel 2.6.35.6 - 48.fc14.x86_64 and can't seem to make it work. I inserted the results of my attempts to install. I installed the kernel-devel, more recent GCClib files and pretty much everything else I found to install on the internet partaning to it using yum.

    -


    Ensuring services for VMware Server are stopped.

    Stop the VMware autostart virtual machines:

    Virtual machines

    Stopping VMware management services:

    VMware Virtual Infrastructure Web Access

    VMware Server host agent

    Stopping VMware services:

    VMware authentication daemon

    Virtual machine monitor

    None of the vmmon modules pre-built for VMware Server is suitable for your

    kernel running.  Do you want this program to try to build the vmmon module for

    your system (you must have a C compiler installed on your system)? [[B[[B^[[B

    The answer "" is not valid.  It must be a "y" or "n".

    None of the vmmon modules pre-built for VMware Server is suitable for your

    kernel running.  Do you want this program to try to build the vmmon module for

    your system (you must have a C compiler installed on your system)? y

    Using compiler "/ usr/bin/gcc". Environment variable CC to override.

    What is the location of the directory of C header files that match your running

    kernel? / usr/src/linux/include /usr/src/kernels/2.6.35.6-48.fc14.x86_64/include

    The directory of the kernel headers (version @@VMWARE @ UTS_RELEASE) does not match

    your kernel (version 2.6.35.6 - 48.fc14.x86_64) running.  Even if the module

    to compile successfully, it would not load into the running kernel.

    What is the location of the directory of C header files that match your running

    -


    Everyone else had this issue. The VMware - Update-implementation to date, I do not think far enough for me to use it on this. I have seen that this takes place with older additions, but I'm not sure how to go about ractifing this. Any help will be greatly appreciated.

    Thank you

    Hello

    Make sure you http://radu.cotescu.com/2010/01/19/how-to-install-vmware-server-ubuntu-fedora-opensuse/ or http://risesecurity.org/2010/04/02/vmware-server-2-0-2-update-patch-2/ in order to get VMware Server 2.0.2 working in Fedora 14.

    I'm also using Fedora 14 x 64 and used the second link (manual process) to install it.

    Kind regards

    Victor

  • Satego P100-10F: underside is hot

    Hello!

    I have a laptop Toshiba Satego P100-10F.
    Recently, I noticed that the underside of the laptop is REALLY hot. Especially on the lower left side.
    The function is perfect, but I am worried about the enormous heat to the top of my laptop.

    Can anyone tell me something about this? Is this normal?

    Thanks for your help!

    Greetz

    That s nothing unusual!
    The portable Satego belongs to the series of newer notebook equipped with devices such as the CPU and GPU and high performance parts.
    The powerful processor and graphics card, produce a lot of heat.

    You said that the laptop is hot on the left side? On this side you can find cooling fans and CPU.
    Heat any runs on the left side!

    Believe me. There is nothing wrong with the laptop.
    Why I'm so sure? Well, the phone supports protection against overheating. If the temperature is too high, then the laptop would be down automatically stops to prevent material damage!

    So Don worry ;)

  • Satego P100: rows and removes all the 2-3 sec during the game

    My system is Satego p100 Vista, core 2 duo 1, 66 GHz, 2048 MB RAM, and geforce 7900GS 512 MB
    I tested a large number of games:
    Company of heroes, Tomb raider Legends, supreme commander, trackmania nations, Battlefield 2, Far Cry, Gothic 3, oblivion, wars C & C Triberium

    Every time the same LAGS in 2-3 seconds the pace will for example of 50 fps to 20 fps, even once at 50 fps every 2-3 sec and so on, it is impossible to play well even if I put the game graphically at the lowest end of 20 to 45 minutes the same delay.

    With the cpu - Z tool, I see that the CPU turns on Office on 1000 MHz, and when he needs
    power, he goes to 1666 MHz but if only a second cpu do nothing, he defined to 1000 MHz.

    On the one hand it is overheating protection and saving energy, but on the other hand, it makes no sense to game of doesn t. In the game, I run a little bit, the cpu gives full data speed, slowing down at full speed lag... Slows down the LAG full speed... and so on, he's crazy!

    I can't find any control panel to adjust it. And to set energy vista setting effective performance do nothing. I read that the core 2 duo are normally stay cool extreme, but sometimes there is deep into the CPU before a second witch high heat-maximum rates are caught from the cooling. I put t now if that's the problem but I often recognized that the cpu fan for no reason, just give a second, fullspeed that slow down!

    I can understand that Toshiba engineers are trying to give a freshness and energy efficient long life for the material, but I could by a professional laptop fore 799,-euros and not this. A system with these hardware settings must be able to give full power without overheating any time.

    I hope it's just a driver issue, but I n t think so.

    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20191

    It s on Satego performance.
    The Vista operating system seems to be a reason for the accidentally drop-outs.

    Install XP, if you want to play games!
    Someone has placed the results of 3DMark06:
    Score in 3DMark06 with Vista 3000-3200 with XP on 3800! XP is an key babe ;)

  • Is it possible to install Win7 64 bit on Satego P100-490?

    Hello
    I wonder if its possible to install this version on my laptop?
    There is no driver to download from the toshiba page, then I would ask if anyone has any suggestions for me.

    Hello

    Yes, it is possible.
    Satego P100 series is very similar to the Satellite P100 series and if you need Win 7 drivers I recommend that you also check the drivers released for Satellite P100.

    Notes; Satellite P100 is a bit older notebook series and the drivers are located in the archives. As a download-> product type, choose the Archive, then tap the P100 series.

    Welcome them

Maybe you are looking for