Running Windows 7 64 bit and trying to install a software - error 80073712

Similar Questions

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• Windows Media Center has stopped to display images. I am running windows 7 64 bit and the photo folders are visible but empty.

  I am running windows 7 64 bit and just recently I cannot see my photos in media center. Show folders that contain pictures, but they are empty. Also, I went to the folders in my computer and tried to open some of my pictures with media center, and they will not open. This is something new because I've always been able to see my photos in Media center. Everything in Media center works great.  Help

  Hello

  1 have you ever done any recent hardware or change the software on the computer before this problem?

  2. the functions of Windows Media Center are intact?

   

  Method 1:

  First upward, to try and perform a System Restore to a State previous when the Windows Media Center worked very well.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.

  Method 2:

  Turn off the feature and reactivate it:

  a. click Start, type appwiz.cpl and press ENTER.

  b. in the programs and features window, click enable or disable the functionality of Windows in the left navigation pane.

  c. find the Windows Media Center and uncheck the option.

  d. restart the computer.

  e. navigate back to the same location and activate the option back.

  Method 3:

  Refer to this link to learn more about,

  See the photos and videos in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows7/view-pictures-and-videos-in-Windows-Media-Center

  To troubleshoot issues with images and videos in Media Center show,

  Working with pictures in Windows Media Center: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-pictures-in-Windows-Media-Center-frequently-asked-questions

  Method 4:

  Reregister the following files.

  a. close Windows Media Center.

  b. click the Start menu, type cmd.

  c. right-click on the cmd option in the start menu and select run as administrator.

  d. type in the commands one by one by and press ENTER after each one.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  e. restart the computer.

  f. restart Windows Media Player and see if the problem persists.

  I hope this helps!

• I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the

  I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.

  Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you

• my pc running Windows 7 32 bit and it is unable to run 64 bit, but I want to install the 64 bit pack what can I do?

  DAKOSMAR41328567

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  I suggest that you back up your current installation before installing:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  In addition, review instructions how to perform a custom installation see for Windows 7:

  How to: perform a customized Windows installation

• I have Windows Vista 64 bit, when trying to install the following updates, (KB980470) (KB980470) (KB981433) (KB981715), I get the error code 646.

  I tried to install each 4 updates individually, but still they will not be installed. Can someone help me out here. I also tried dealing with the regisgtry through my Norton application. My computer works fine but I would like to install updates. I've tried now about 2 dozen times

  christopher_nievol,
  You must download the updates and install them manually.  You can go to the Microsoft Download Center and search the KB # and then save the file to your desktop.  I would recommend performing a clean boot your PC and then, by running your office updates.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm running Windows 8 Preview release and will not install my HP Solution Center

  Officejet 5610 all-in-one printer

  Windows 8 Preview Release, evaluation copy. BUiD 8400
  Laptop Acer Aspire 7741Z

  HP Solution Center will not install.

  Error:
  Registry keys:
  Slbcsp.dll
  Sccbase.dll
  Gpkcsp.dll
  Enum

  missing in the registry.

  DesperateDan,

  You're the list correctly. Please remember that this document communicates that drivers are coming as windows 8 debut, not what is now available.

  Because windows 8 is still in a preview version, you will have a few problems with whatever you try to use the current drivers. Make sense?

• I'm running Win 7 (64-bit) and tries to access a printer (HP Laserjet 6 p) on a home network

  Computer on the network where the printer is installed is running Win 2000 Pro.
  Sharing is enabled on both, but cannot print. Troubleshooting utility was not to define and solve.
  Desperately need help.
  Thanks and congratulations to my Savior.

  This should work for you as well as it did for me:
  http://www.SevenForums.com/network-sharing/7527-networking-printer-attached-win-XP-PC-win-7-a.html>

  It is said to Win7 and WinXP, but I was able to use it for a mixed network of WinXP (x 86), Win7 (x 86 & x 64) and Win8 (x 64). I can't imagine W2K is very different, or not at all. My printer is connected to the WinXP machine. If your PC Win7 a driver, there is a Windows Update available.

  SC Tom

• Hi, I am running windows 7 64 bit and I have the BSOD.

  I have a machine that I custom built about two years ago and recently I get a BSOD message about once a day. I have the dump files but don't understand how to download or read them. I would appreciate help. Thank you

  Sorry for the late reply. I ended up replacing my processor and have not had an error of BS since early March. I don't know what happened but it was difficult to diagnose. Thanks for the help.

• Windows 7 (64-bit) and 5.2 of NI-Visa

  Hello

  I use Windows 7 64-bit and has just installed TS/LV2012 and NI-Visa 5.2

  Then I started MAX and that you want to add a new instrument of TCPIP, but it says: "NI-VISA is not installed on this system or NI-VISA does not support the creation of new resources on this type of system.

  So I wonder: neither Visa 5.2 is not compatible with Windows 7 64 bit? Because on the site, it is only "WIndows Vista" in the product description.

  Thx for the help

  Additional information: TS/LV is installed on a WIndow7 that runs in a VirtualBox Image. This can be also a problem?

  His works now.

  After I've run all Windows updates in the VirtualBox the VISA was also Max.

• I am running Windows 7 64 bit. I am trying to remove a wireless profile, but he comes back.

  I am running Windows 7 64 bit. I am trying to remove a wireless profile, but he comes back. Also, I can't change the profile. A post said to delete the registry. Where is it in the registry?

  original title: removal of the profiles in Windows 7 wireless

  Information network are in the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\NetworkList\Profiles registry key and then the individual \GUIs.

  The right pane contains the details, for example profile_name is the network name (SSID).

• I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

  Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

  original title: AutoPlay

  Hello

  You can fix the error in reading auto/AutoRun.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

  AutoPlay - Autorun does not not under Vista
  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  CleanHandlers - AutoPlay Cleanup utility
  http://WindowsXP.MVPs.org/autoplayhandlers.htm

  See this and also scroll the messages below.

  How to change the settings for AutoPlay Vista
  http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

  In the opposite direction might help.

  How to add entries customized AutoPlay in Windows Vista
  http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

  I hope this helps.

  Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

• I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  Windows Vista SP2 came out mid-2009.  You should have gotten a long time ago.

  How to obtain the latest Windows Vista service pack

• I can't install Adobe Flash Player.  I have windows 7 64 bit and firefox browser.  During installation, that I get a message "lost connection", followed by "trying to reconnect", then cannot connect

  I can't install Adobe Flash Player. I have windows 7 64 bit and firefox browser. During installation, that I get a message "lost connection", followed by "trying to reconnect", then cannot connect

  Please use the Offline Installer

  Internet Explorer:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/Install_flash_player_ax.exe

  Firefox and other NPAPI browsers:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/install_flash_player.exe

• HP 1000-1433TU: LAN drivers for HP 1000 - 1433TU running Windows 7 64 bit

  I will try to find the correct LAN drivers for a HP 1000-1433TU running Windows 7 64-bit model.  I tried a variety of drivers for this model on the HP site, including those for Windows 8 and Windows 8.1, but none of them does not seem to install the drivers, I need to be able to connect directly to a Modem via an Ethernet cable.

  This is a new installation of Windows 7, as I prefer it to Windows 8, and I also tried to install the Chipset Drivers (available only for Windows 8, but a necessary component!) before the LAN drivers, but still no luck.

  At ran Windows Update to see if that can solve the problem, but again, without success.

  Thank you very much in advance for a solution to this.

  Hello:

  You should be able to use most of the drivers W7 64 bit on your model.  Do not use any BIOS or the files of the firmware of this model on your right.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275370

  The ethernet driver is this one...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104622-1&cc=us&DLC=en&LC=en&OS=4063&product=5275370&sw_lang=