RunState not updated results

Similar Questions

• Results of VO not updated on the event

  Gurus,
  
  The output of the method below log indicates that 'account' is correct, however, my VO is not updated with the additional condition that I've defined below. Any ideas?
  
  Impl VO code:
  
  Public Sub initRef9LovVO (String acct)
  {
  setWhereClause ("descriptive_flex_context_code in (select $vendor_name from spl_account_map where cont_cd =: 1)" ");
  setWhereClauseParams (null); Always reset
  setWhereClauseParam (0, acct);
  System.out.println ("value_selected in acct2 > >" + acct);
  executeQuery();
  }
  
  Any help would be greatly appreciated.

  Check your value of poplist

  If you set the vo in the field "View Definition list of choice."
  PoPList not updated...

  If you want to change the list
  you will define vo in "view Instance Pick."

• Keychain does not display the password or secure since 10.11.2 notes updated

  Keychain does not display passwords or secured since 10.11.2 notes updated. I enter the password and move out them.

  Attempted to create a new keychain, then re-import the old etc. Turned on and off in icloud. Keychain firstaid is absent from the update so no luck there. Any thoughts?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• ATI X 700 driver for M60 will not update

  I applied the updated driver for my ATI X 700 Radeon located in my Satelite M60 but it ust does not update the driver! If anyone else has noticed this. I have a game that does not work on my laptop (Harry Poter and the Chamber of Secrets) and I just can't no matter what EA Games support, until it is resolved.

  Hello

  If you try to install the driver downloaded from the download page of ATI, it is normal that this driver cannot be installed. Sometimes there is a message that hardware is not found.

  On this path will be the portable equipment protect. Problem is that the ATI driver may force the graphics card to runs more quickly and this way to damage the card. Otherwise, the result may be overheating and suddenly machine stops.

• Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 will not update

  Today, I upgraded my Vista Ultimate Edition of Windows 7 Ultimate and checking the updates it listed 10 important updates. I went back in and there was still the major update 1 "Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 (SP2) who refuses to update which results in an error. I tried several times with the same error that results. Any suggestions as to why?

  The update could not update with no error code, just says 'update failed." However after that restart and check the view of the update the update again must have occurred because it is no longer returns in search of updates.  Thanks for responding to my problem

• can not update; "" Windows or windows defender ' more and I lost my; "' help and support ' file system on startup. Need help to get all that, please.

  I can't update "windows" or "windows defender". Followed the steps described by Microsoft help, tried to download manually, have asked Microsoft to help (no response yet) these first two things didn't work. I even had something like; change setting.that message security came for "Windows update", I have change the security setting, did not just well, still nothing.
  Windows Defender gives me an error code that looks like this;
  Error Code 0 x 80070005
  That's all I can get, and it will not update.
  and on top of it, I've lost my "Microsoft Help and support (it) when I click Start and click Help and support, I get a (?) all help options or when I click on it nothing there is totally 'empty '.
  I have one more problem.
  I tried to defrag my computer, and I can't do it either. I get a grey screen and if I click on anylise or defragment, it does nothing, no error message or anything else. Tried to manually defragment Traore does not work, tried to load a defrag on the web program, wouldn't let me load it.
  Nobody knows what happens here? why I'm having these problems all of a sudden? I do nothing but send E-mails and read my emails and I do not browse the internet or enter sites that are safer. So, what can I do? How to make everything return to normal? can someone help me with this?
  Also let me tell you right now, I'm not an expert on how to do things on the computer, so I'm scitish when it receives or sounds complicated. I don't want to lose my entire system because of these unfortenate none of the work programmes.

  Hello shessy49, welcome.

  I would recommend that we run a SFC (System File Checker) first scan to see what he finds. Try this:

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  ---
  After the reboot
  ---

  1. click on START
  2. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  3. type "sfc/scannow" (without the quotes) and press enter

  If the question started very recently, you can try a system restore:

  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MSG for error ProgramFiles\SearchExtensions\Client.exe & Avira does not update & Adobe Flash Player does not work

  Hello.  My computer is running XP.  My cpu is Intel Core 2 Duo processor.  Sometimes I use Firefox and Chrome.

  At startup, there is always a prompt that shows "C:\Program Extensions\Client.exe Search make sure that you type the word correctly and try again".  With it, there is a white rectangular black box with label on top "C:\WINDOWS\System32\svchost.exe.  With her, I also noticed my antivirus Avira will be not updated.  It says "Your PC does not work properly", and when I click on "Difficult problem", it says "error" and does not always update.  And with her also, I can't update Adobe Flash Player.  It downloads, and then when I click "Run", he always says 'error' could not retrieve the data it needs.

  I tried to uninstall and install new Avira, and it's always the same problem.  I am also afraid that I can't watch my favorite videos from YT because it requires an update to Adobe Flash Player.

  I searched the internet for problems Client.exe and svchost.exe, and in one of the answers with Client.exe and taskeng.exe problems microsoft, I tried to follow somehow solutions step by step.  They require that you are looking for a task scheduler or folder tasks and I discovered my computer is not all that.  Any Scheduler task and in System32, no task folder.  Because you need to search for files with "rocket" in there and delete it.  Others find it useful.  I don't know if this is the case even with my computer.

  I also try to do a system restore.  He has yet to eliminate the prompt error Client.exe and svchost.exe.  After I did, there is a message box that says "Avira CCPLG. XML file is missing.  I searched the internet, but nowhere, you can download this missing file.

  I hope that my computer has no need of a reformat.  I hate reformatting.  Also, what is ADWCleaner?  Is it advisable?

  Help.  I need "simple" solutions  If you have any other questions regarding this problem, please bear with me, because I'm not a techie.  Hope that everyone out there can help me.

  Thank you.

  Oh Yes...

  Looking at a different Google search results, in addition to deleting "rocket"-oriented tasks, they mention using Autoruns to delete any "rocket" focused on the startup items that you may have:

  https://www.YouTube.com/watch?v=mKchQdXjuPA

  It is a good idea and you can get Autoruns here:

  https://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Autoruns is the program Windows msconfig on steroids.

  Just download it, unzip it in our office or somewhere you can find it, run Autoruns.exe, enlarge the window, you can see everything and wait until it finishes populating the list of entries.

  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.

  Look at everything and log tabs and you can also see your scheduled tasks.  You can also click on the "Find" button (looks like binoculars) and looking for something to do with the 'rocket', and delete them. "."

  The items that appear in a color shrimpy came not "signed" with third party programs, that you have installed, and are not usually a problem.  The manufacturer just didn't "sign" their files properly.

  The items that appear in a yellow color are the entries that point to a file, the path, the place that doesn't exist so that they are a bit suspicious because they probably don't make sense more.  I usually just delete those yellow, but sometimes they come back.

  Autoruns does not install anything on your system - it just runs on request, so you can keep around or remove it when you're done (nothing to uninstall).

• Why didn't - it not updating of security KB2686509 that installs on my machine Windows ProXP SP3?

  Whenever I turned off my computer, the update statement appears, but KB2686509 is usually the only one update, and of course, nothing happens

  Just hide & move on with your life.

  Tip: You can print the following instructions for consultation offline.

  ACTIONS

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  1B. IMPORTANT!-online make disappear/close the update Windows utility for troubleshooting 'pop - up!' -then...

  1 c. ignoring "not recommended" or similar warnings, difficulty running it 50202 DEFAULT modes and AGGRESSIVE. [1]

  2 then restart IMMEDIATELY...

  3. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan.

  => In the category of the optional software updates on the left side of the scan results window, uncheck the option KB2686509 (assuming that it is checked) then hide it ("don't show me this update").

  -Online if an update of root certificates is listed under the category of updates software optional , install it to enjoy greater security of IE8.

  -Online Tip: do NOT install other updates software optional or optional hardware updates. just hide them, too.

  Now, go back to the main result window & install all updates listed (if any); Follow all the instructions.

  Note: of course, if security updates are listed in the window of main results (for example, KB2744842), you must install them!

  4. in response to this post with a status report.

  =======================================================
  [1] full Disclosure: the difficulty operating in aggressive mode will remove your update history (to the Windows Update Web site) but not updates installed in Add/Remove Programs list.

• Monitor performance and reliability of Vista not updated

  Hi all

  I have a HP Pavilion dv4 Vista SP2 machine is installed. From time to time, I check the performance and reliability of my machine monitor. Recently I discovered that reliability monitor has not been updated since 17/03/2012, while performance monitor is OK. I've used various methods to overcome this problem to delete the contents of the folders PublishedData and stateData evolution of their access permissions. However, no method has been of assistance. I also tested my memory with the Memory Diagnostic tool, and if all goes well no error has been detected.
  When I check the Task Scheduler RacAgent.exe, everything is OK and its State is mentioned as queued. But when I run it, nothing happens and the last Run result shows 0 x 0. Also when I run the command line RacAgent.exe nothing happens. I should mention that a few days ago the RacAgent.exe worked normally and the task manager has also shown its process for about 30 seconds and the field last result run the task scheduler has shown other useful addresses, but even at that time there, I had the same problem: reliability monitor not updated.
  I really need your help and I look forward to your itinerary
  Best regards

  Hey Amir,

  Thanks for asking! Looks like there could be possibly a corruption of system files or an infection. We will check by running the associated scans.

  The auditor of file system (CFS) scanner to check any file system corruption. Follow the article here.

  In addition, run Microsoft Safety Scanner to check any infections. Read this article for the same thing.

  I hope this helps! Don't answer that if they do not help, we can seek other options.

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• Thumbnails of graphic files only do not update after editing files

  Thumbnails for .jpg files, and other graphics files not updated when files are changed, so that thumbnails are not always the content of the graphic file.

  Hi Gabriel,

  Welcome to the Microsoft Answers site!

  When you save the file that you have updated?

  You can do a Disk Clean Up and next time when you open the folder thumbnails will be rebuilt and everything should work as you wish.

  To perform cleanup utility disk

  1. Open Disk Cleanup by clicking the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.
  2. In the drives list, click the drive you want to clean, and then click OK.
  3. In the Disk Cleanup dialog box, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.
  4. In the message that appears, click delete files.

  This should solve your problem of thumbnails not to get updates.

  For more details follow the link below.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product.

  Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product. Do the thing anytime upgrade and after a wait I am informed upgrade failed, what should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Does not update Apps Store

  Hey,.

  The store told me that 15 of my apps need updates (just the pre-installed applications) so when I try, click on install and update applications and select all, a small animation with 5 points is displayed at the top of the interface, but nothing seems to happen. There is no progress bar or indicator of any kind that something is happening.
  I have also left for a while and there was no results (not updated).
  Any help on this?
  Thanks in advance

  Maccyjam

  Try to clear your cache store

  Right-click of the start screen (lower left corner)

  Click on run

  Type: wsreset.exe

  Also make sure they say in "your apps".

  Open the store

  Right-click anywhere in the blank space and select all applications to ensure that all say installed first, otherwise install each then one try the updates again.

• Oracle apex 5.0: not update the values in the Collection.

  Hello again,

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  All of the Suggestions!

  Thank you

  Pranav.

  Pranav.Shah wrote:

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  The "coll update" process fails with a ORA-01403: no data found error. This happens in line 11 because of the access attempt to the wwv_flow.g_f01 using the variable array subscript c who has been incremented beyond the size of the table, which is now smaller because of the IR filter applied.

  begin declare
    c pls_integer := 0;
  begin
  for c1 in (
    select seq_id,c001 from apex_collections
    where collection_name = 'MATRIX2'
    ) loop
  c:=c+1;
  apex_debug.message(c);
    apex_collection.update_member_attribute (p_collection_name=> 'MATRIX2',
    p_seq=> c1.seq_id,p_attr_number =>'2',p_attr_value=>wwv_flow.g_f01(c));
  
  end loop;
  end;
  end;
  

  I agree with fondant tabular forms on interactive reports, but you can meet your requirement as follows. In your application, see page 2.

  1 Add a column of form element hidden IR containing the sequence number of collection:

  select
      c001 col1
    , apex_item.text(2, c002) col2
    , apex_item.hidden(1, seq_id) seq
  from
      apex_collections
  where
      collection_name = 'MATRIX2'
  

  2 place the question of the hidden form in the report using the COL1 Expression HTML attribute:

  #COL1##SEQ#
  

  3. change submit to the process if it is driven by the subject table, not the existing collection:

  begin
  
    for i in 1..apex_application.g_f01.count
    loop
      apex_collection.update_member_attribute(
          p_collection_name=> 'MATRIX2'
        , p_seq=> apex_application.g_f01(i)
        , p_attr_number => '2'
        , p_attr_value=> apex_application.g_f02(i));
    end loop;
  
  end;