RunState.ProcessModelClient. how to access the results of markets located in the loops?

Hello

In my sequence, I have to perform an analysis of the results before I have the MainSequence and return to the process template. Basically, I need to check made some steps has passed.

I access the results using RunState.ProcessModelClient. Using what I have access to the list of results. I would like to write that I have access to each result but I can't because I spotted the results of steps which are curly are not accessible (they are not there); However, they are on the report.

How is it possible? How do I access results in a loop? Where are they?

K.

Hello

not too painful:

the loop results in the usual place online, it's just the layout that will look like a little confusing:

You use some revisions of my TestStand (you are in 3.1)

The Runstate.ProcessModelClient is actually a copy of the space of time edit, not space running - it's the SequenceFile type, which means that even if you can see the layout of the result containers that belong to each step, they are there permanently, and not filled in this place from the moment of execution.

At the level of the mainsequence, you're still in your client, then you can go to Locals.ResultList directly.

In there, you have the singular element that is the result of the first and the only stage of your Mainsequence of your.

Inside there is the. TS. SequenceCall container. It is effectivey the resultlist gait that calls (always Mainsequence) seq1 so inside that, there is an another ResultList.

It's the ResultList for sequence "Seq1".

Which has a single item since this sequence has only one step inside of type SequenceCall.

[0]. TS. SequenceCall.ResultList.

From there you can see a lot of results even if you have only 4 effective steps in this sequence.

12 results covers:

3 iterations of ('for' 'Test2' 'end').

and then the last 3 items are "Test1" loop 2 times more.

When you set a stage of the loop and include you the results of each iteration, you get these results (2 in your case) more a global success-failure based on the criteria (your care ot 100% must pass in order to study the step successful when all iterations are complete.)

Note in your pre Expression where you change the name of the step on the fly, your labeled Test2 incremental changes the name from 'Test1' + Str (Locals.LI), and the Test1 marked step uses the same expression for this will look slightly confused that you cross your results.

Hope that helps.

Thank you

Sacha

Tags: NI Software

Similar Questions

  • After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera.

    Original title: webcam

    On my laptop hp15r, it is built in hp truevision hd webcam. After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera. Can someone help me with this problem?

    I have a laptop HP Windows 7.

    Type truevision or webcam or similar in the top of the start menu search box > right-click on the result, then select > open file location.

    My webcam can be found > lecteurC > Program Files (86) > Cyberlink > YouCam

    If I type YouCam in the search box, click with the right button on Cyberlink YouCam, it takes me to YouCam.exe.  You can do a right click on the .exe file and choose desktop (shortcut) so that you can access it from there. Once the shortcut on the desktop you can right click it and choose the PIN to the start menu or PIN to the taskbar tasks.

  • How to access the info in my iCloud account

    How to access the info in my iCloud account?

    You can access much of the iCloud.com on a computer or through specific applications on your mobile device such as contacts, calendars, iCloud Drive, Photos. What exactly you were looking for and what type of device.

  • How to access the bios?

    I am trying to install a new OS, how to access the bios on my HP Pavilian dv8?

    Hello:

    You should be able to access the BIOS by pressing the F10 key as soon as you see the HP welcome screen.

    Paul

  • How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

    I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

    I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

  • How to access the firefox on laptop Office keeping all the features?

    How to access the firefox on laptop Office keeping all tabs and bookmarks?

    Hello

    You may be able to do this in Firefox Sync configuration on both devices. Please see for detailed instructions.

  • Qosmio G30-126 - how to access the bios!

    I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?

    Hello

    Try pressing the F2 key by turning on the device.
    The Toshiba notebooks supported the ESC and then F1 button
    If these two options are possible

  • Re: How to access the BIOS on Satellite Pro A120

    Can someone tell me how to access the BIOS on my SAT Pro A120?

    Hello

    You must press ESC and then F1 key immediately after the laptop has been powered!

    The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

    Good bye

  • How to access the BIOS on Satellite A110-195 settings?

    How to access the BIOS settings (CPU, video memory ect). I have http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 18639

    At the start when the Toshiba start screen appears press F2 repeatedly and you should be able to enter the BIOS settings.

  • How to access the BIOS on Satellite C50-A-1F

    Hey folk,

    A small question:

    How to access the BIOS of my laptop?

    I tried this method and f12, f1, f2 etc.

    Thanks in advance

    Have you ever tried to look for similar issues here in the forum?

    Check this one:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=76740

  • HP laptop - 15-ac121dx: how to access the ram on a 15-ac121dx modules

    I want to upgrade the ram in my HP laptop - 15-ac121dx and maybe the hard drive, but I can't understand how to access the ram. There is no access panel, and unlike some other models, it doesn't have a single lever in the battery bay to remove the cover.

    OK, I realized how down low on the laptop.  After watching some youtube videos I came across another HP laptop computer who had screws under the rubber feet and of course there are also screws under the back of two rubber feet, can't believe I didn't think to look under them.

    To get the background you need to:

    1. Remove all the screws on the bottom.  (Must be 12 total)
    2. Remove the drive from DVD (Yes it does not).
    3. Finally, carefully separate the case around the side.

    After that, you should have full access to the slots of RAM and hard drive.

  • How to access the BIOS on Satellite Pro A120

    Sorry for my English.
    But I need help:

    How to access the BIOS on my Satellite Pro A120

    Hello

    If I m not wrong not the Satellite ProA120 is supported by the Toshiba BIOS and so you should be able to access the BIOS pressing the * ESC * key immediately after starting the laptop

  • Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

    Hello

    I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

    How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

    Any help much appreciated

    Hey,.

    On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

    You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

    If you don t have the recovery disc, you can order it here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • How to access the BIOS on Satellite L670-134

    Hello

    I need to access the BIOS, but I don't know the key combination.
    Tried F1 F2 DEL Backspace etc that none worked.
    I think I activated an option such as quick start once before... when I turn on the laptop I see not all postscreen, the screen remains black after turning on the laptop, and then the windows logo appears.

    So, how to access the BIOS!

    Hello

    Usually, you can access the BIOS by pressing the "F2" immediately after that the laptop was turned on!
    Try this once more. Alternatively, you can press F2 repeatedly to be sure that this has been accepted.

    Also try key INS all by turning on the laptop and then F2

  • How to access the health application on an iPhone 4 running iOS 9.2 s?

    How to access the health application on an iPhone 4 running iOS 9.2 s?

    The icon is missing?

Maybe you are looking for

  • Shortcuts with single letter keys can produce unexpected results. Why no function keys?

    Sometimes I start typing a reply, or by entering a key word to search without having to pay a lot of attention when the window focus is. If it's on the messaged pane, a few keystrokes can correspond to a single letter shortcuts, mess up the Inbox wit

  • playlist amended notice

    Hello my playlist display has been changed and I don't know how to change... This is the new I want to go back even below pls how?

  • Geniuses damaged my battery?

    About two months ago, I brought my iPhone at the Apple Store for a cracked screen repair and replace the screen. Since then, the percentage of battery guard fluctuating and die at random to good percentages more than 50%.  I will be responsible for t

  • Why can not correctly load a Firefox plug-in

    Hello Despite several attempts, I can not load plugin FF required to display content of radio station? I uninstalled my software anti-virus in Tyre and restarted my machine, but it still doesn't load/take? The station of plug-ins for IE and Chrome wo

  • What to do now؟؟؟

    Too many attempts were made to enter your information. Try again later. Answers to security questions are incorrectly entered because I forgot What to do now؟؟؟