RV042 impossible to disable the DMZ Host

All trying to configure my RV042, I "turned on" the DMZ host feature (under Configuration > DMZ Host) by entering the address LAN IP of one of our machines. I think now that I don't want to actually on. According to the help page (and also the manual), he says:

"Enter the IP address of the network device you want to use as a host DMZ." Otherwise, enter a zero (0.0.0.0) to disable the DMZ host.

So I try to enter the address 0.0.0.0, and it gives me an error:

What I am doing wrong? The instructions are just incorrect? Is there a way to disable this option?

If the LAN subnet is 192.168.1.x/24, you might want to try instead of 0.0.0.0 192.168.1.0 to disable DMZ Host.

Tags: Cisco Support

Similar Questions

  • Vpn client access to the DMZ host

    I'm having a problem where my customers who establish a VPN with Pix 515 cannot access hosts on the DMZ. VPN clients can access hosts inside network without any problems. I discovered that when I make a route to trace from a client computer that has established a VPN connection to a host on the DMZ, he tries to go through the default gateway of computers instead of the client from cisco. Any ideas?

    More information:

    When a client connects with the PIX over the VPN, it is given the internal DNS servers and the DNS Server internal, we have a host entry that says "www.whatever.com" 2.2.2.2 (this is the DMZ host). Customers within the network can access this host with problems, it's just the customers who establish a VPN connection. But the VPN Clients can access "www.whatever.com" using the public ip address. The problem is that if remove us the entry from the host on the DNS server so that the name of "www.whatever.com" decides the public ip address customers inside will not be able to access the DMZ host. The names and IP numbers are not real just using those as an example.

    Any help would be apperciated. Thank you

    You'll currently have something like this in your config file:

    sheep allowed ip access-list

    NAT (inside) 0 access-list sheep

    This tells the PIX not to NAT any traffic from inside interface, which is to go to a VPN client. You need the same thing but for the DMZ interface, then add the following:

    sheep allowed ip access-list

    NAT 0 access-list sheep (dmz)

    Who should you get.

  • Impossible to disable the time synchronization in VMWare Workstation 8.0.1

    I read 1189 KB # as well as various articles on disabling time synchronization between host and guest, but I can't seem to stop synchronization.

    I closed the comments and edited the VMX file as follows:

    tools.syncTime = "FALSE".
    Time.Synchronize.continue = "FALSE".
    Time.Synchronize.Restore = "FALSE".
    Time.Synchronize.Resume.Disk = "FALSE".
    Time.Synchronize.Shrink = "FALSE".
    Tools.Synchronize.Tools.Startup = "FALSE".

    But no matter what, the time of comments still synchronizes to the host after turning the power on or return to.

    I tried on the hosts Windows 2008 x 86 and Windows 2008 R2 with the same results.  I also disabled the functionality of Windows to "synchronize with a time server Internet.

    I'm using VMWare Workstation 8.0.1 on Windows 7 Pro x 64.

    Clues as to what I'm missing?

    Thank you.

    Your initial message, I found that something is different with the content of KB.

    Will keep you ' tools.synchronize.tools.startup = 'FALSE' but the KB said there should be time.synchronize.tools.startup = 'FALSE'.»

    Please copy and paste below your *.vmx file model.

    tools.syncTime = "FALSE".
    Time.Synchronize.continue = "FALSE".
    Time.Synchronize.Restore = "FALSE".
    Time.Synchronize.Resume.Disk = "FALSE".
    Time.Synchronize.Shrink = "FALSE".
    Time.Synchronize.Tools.Startup = "FALSE".
    Time.Synchronize.Tools.Enable = "FALSE".
    Time.Synchronize.Resume.Host = "FALSE".

  • Impossible to disable the CS6

    Hello.

    I recently updated my computer and delete the old hard drive with premium web and design adobe CS6 installed.

    After the installation of the CS6.

    It is said that I used the same serial No. three times.

    and I have to disable the previous

    What is impossible for me.

    Please help, thanks.

    You should have disabled the installation before remove you the old hard drive.  You must contact Adobe technical support by chat or phone to enforce disabling.

    Here is a link to a page with options to help make contact:

    http://www.Adobe.com/support/download-install/supportinfo/

  • Impossible to disable the time synchronization

    Hi all

    I'm very new to VMware player, so sorry if this topic has jet were treated / my questions are obvious.

    I am running Windows 7 Pro as a guest in VMWare Player 3.1.0 host system is Windows XP. The client Windows 7 Pro as created directly from VMware

    Player (create a new Virtual Machine...). Everything is ok and the

    Created virtual OS with success of the DVD ISO. I want to disable the synchronization of the time of the guest computer, but I can not: opening the virtual machine (in a State of suspension), comments clock is synchronized after a few minutes.

    Here is a list of steps / attempts to solve the problem (without success):

    • I installed VMware tools, disable the synchronization of time in the menu "options".

    tools.syncTime = "FALSE".

    Tools.Synchronize.Restore = "FALSE".

    Time.Synchronize.Resume.Disk = "FALSE".

    Time.Synchronize.continue = "FALSE".

    Time.Synchronize.Shrink = "FALSE".

    • Inside "Internet time" synchronization is disabled.

    • Guest network card is disabled

    Thanks in advance for the help.

    This article is old - see more information http://sanbarrow.com/vmx/vmx-always-start-tonight.html

    you need more than two parameters since some versions - you have 5 - you have all 7

    tools.syncTime = "FALSE"
    time.synchronize.continue ="FALSE"
    time.synchronize.restore = "FALSE"
    time.synchronize.resume.disk = "FALSE"
    time.synchronize.resume.memory = "FALSE"
    time.synchronize.shrink = "FALSE"
    time.synchronize.tools.startup = "FALSE"
    

    ___________________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • Impossible to disable the notification app on Apple Watch 2

    Hello

    I recently bought a new series of Apple Watch 2, which comes with the watch as 3 preinstalled OS. I know that all my notifications in instant messaging (whatsapp, wechat) have been reflected on my Apple Watch. I find too boring and I want to turn it off. I followed the instructions (go Apple Watch app on the iphone paired, then notifications, search for the application and then turn off 'iphone mirror'), but it did not work. Notifications will always appear on my watch for these two applications. The only way I can get rid of the notification is to change the style of alert iphone to "none" for both applications. But this way I get the banner on iphone or which is not acceptable.

    So my question is:

    1. What is the settings "mirror iphone alerts" in the menu of notification of Apple Watch app supposed to do? He seems to have no effect at all?
    2. This notification of iphone mirror setting OS level control or that something must be supported by the application in order to have the effect? In other words, if it's a bug, is a watch OS bug or a bug in the application?

    Thank you

    Xinchao

    Hi xinchao

    After you disable the option for ' mirror iPhone alert of "for each application, it can be useful to restart your iPhone and your watch, both off together, and then restart your iPhone first:

  • Impossible to disable the column "Preview" in the Finder Windows

    Before that I describe this problem, I just want to clarify that I have configured Finder to always open folders in a new window, and while some of my files are put into mode icon that the majority is set to display in the list.

    Following an upgrade to Yosemite to El Capitan, some of my Finder list view windows began to show the column "Preview" on the side of the far right, after the date modified column. I don't like this feature because when none of the folders or items are selected it shows just a ugly "blank" space in the window. So, I quickly discovered that I can disable this "Preview" column by selecting "hide the Preview" in the view menu.

    The problem is that once I chose this, in many of my files change does not stick. After a reboot or a restart, I'll go back to the window and the preview column is again. Sometimes it happens immediately after closing the window and opening it again. The worst culprit is my user folder.

    I tried selecting "Hide Preview" and then enter the display options and set as the default view for all Finder Windows, but this makes no difference.

    Anyone know how to disable the overview at all times column in all the windows in the Finder?

    This is what it looks like in my folders set to display from the list:

  • IMPOSSIBLE TO DISABLE THE NATIVE START NARRATOR

    I can't disable the Narrator at the start.   I crossed the start list and uninstall the program, and the NARRATOR IS NOT YET LISTED?   How do I uninstall or get rid of a program that is NOT LISTED?

    Help, please...

    Try this: go to control panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > uncheck the box by tour Narrator > click Save...

    See you soon.

    Mick Murphy - Microsoft partner

  • Impossible to disable the mouse after installing updates,

    I use a usb mouse and before I could disables the Tablet thing that my laptop has integrated, now I can still use my usb mouse but I hell cant the key so whenever my hand hit my pointer strays. Help, please! I have a Toshiba Satellite, I have Windows Vista IE 7, do not know what other info someone needs just installed some updates for windows and installed Silverlight. Thanks in advance,
    Stephanie

    Hello Sexystephm,

    Thanks for posting on the Community Forums of Microsoft Vista.

    It should probably be shortened on your laptop keyboard to disable the touchpad (FN + F9). Also check in Control Panel, you should have an option to disable the touchpad of your laptop.

    However, if this has happened after I installed updates on your computer, you can try to restore the computer to an earlier date when you have been disable the touchpad.

    To perform a system restore, follow these steps:
    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
    If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. in the System Restore dialog box, click on choose another restore point and then click Next.
    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. click on finish.
     
    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Also, you can check with the computer manufacturer if they have additional settings to change or updated drivers to install.

    Link to contact toshiba support: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Product%20Support&sn=false

    It will be useful.

    Thank you and best regards,

    Srinivas
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • always impossible to disable the keyboard to display even the box is unchecked

    I am using asus eeepc1001pg windows 7 starter edition, I followed the instructions to disable the check box on the box for the keyboard to screen on and rebooted but it isn't always turned the osk. I can connect to my laptop with the keyboard and after as I cannot use my keyboard to type the web address and even microsoft word characters. Please help as soon as possible...

    Hello

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    (a) click Start, type regedit and press ENTER.

    (b) go to hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

    (c) If you see a value under the given location above which runs osk.exe, delete this value.

    Hope this helps.

    Diana

    Microsoft Answers Support Engineer

  • Impossible to disable the touchpad on my dell inspon laptop windows 7

    No matter how I try, keyboard gets up in the middle of the text, I type.  have not been able to turn off on my computer dell laptop, windows 7

    Hello Joan.

    You must have an application on your portable computer that governs your Touchpad control. To find it, go to control panel, click Properties of the mouse, find the Touchpad tab along the top row of tabs. Click on that and you should be able to find several parameters that allow you to disable the buttons, the buttons on pointing stick and Touchpad itself. In addition, it has a checkbox to disable the Touchpad when an external mouse is detected.

    If you do not have this application, you must download it from the Dell site. To do that I need the model laptop, you have (all letters and numbers) or your number Service number (at the bottom of the laptop), as well as the version and color depth of Windows 7 you are using (Tip: go into Control Panel, click on system, the info is in the first box of information).

    After back here with your results. Let me know if you have any questions.

    Kind regards

    BearPup

  • Impossible to disable the Welcome screen in Acrobat 2015 or DC

    Hello

    I downloaded Acrobat DC, extract the MSI file and used the wizard of customization to delete the shortcut on the desktop, disable updates and accept the EULA.  I have configured the group policy to set the following registry keys (among others):

    HKLM\Software\Policies\Adobe\Acrobat Reader\DC\FeatureLockDown\cWelcomeScreen

    bShowWelcomeScreen

    REG_DWORD

    0

    as shown: light http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/AVGeneral.html?zoom_high = welcome #idkeyname_1_4934light http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/AVGeneral.html?zoom_high = welcome #idkeyname_1_4934

    and the following Welcome screen keeps appearing:

    AdobeAcrobatDC.png

    I have also downloaded Acrobat 2015 and used the same process, but used the registry:

    HKLM\Software\Policies\Adobe\Acrobat Reader\2015\FeatureLockDown\cWelcomeScreen

    bShowWelcomeScreen

    REG_DWORD

    0

    and it still seems.

    is there a way to disable the Welcome screen that is displayed?

    Hello

    If you want to disable the dialog box above, you can set the following key, by means of group policy or the Publisher directly in the Customization Wizard:

    HKLM\Software\Policies\Adobe\Acrobat Reader\2015\FeatureLockDown\

    bUsageMeasurement

    REG_DWORD

    0

    Thank you

    Vinod

  • Impossible to disable the item key

    I tried to disable the page with the dynamic action (Disable) and javascripts option question button
    document.getElementById("IDOFBUTTON").disabled = true;
    calls: $x_disableItem
    but not working, any idea?

    Thank you

    Hello
    >
    IM has added a new dynamic action
    onPageLoad > run Javascript > $("#TEST").unbind ("click");
    Scope of the event: Bind
    but can't make it work...

    I know it depends on the themes/templates. (my theme 23 Apex 4.1)
    >
    I presume that you have specified a TEST like the static ID of the button.
    To disable the button, you need to remove the href attribute

    $("#TEST").removeAttr("href");
    

    To enable it, you need to add the attribute href return

    $("#TEST").attr("href","javascript:apex.submit('')");
    

    See you soon,.

    PS: Inspect your HTML element button. You will see something like this

    Click Me
    

    NOTE: There should be no space in h ref, just added to post.
    In the code above
    ID = 'TEST', where the TEST is the static ID of the button. Button required with #BUTTON_ATTRIBUTES model #.
    CLICK_ME is the name of the button, the button REQUEST
    Click on me is the test Label /Alt.

    Published by: Dominique on August 13, 2012 17:14

  • LineChart - impossible to disable the legend

    Hello

    I am trying to disable the legend in the chart, but somehow, it does not work, always appears.

    Sample of my code:
    private final static XYChart.Series<Number,Number> series = new XYChart.Series<Number,Number>();
    private final static NumberAxis xAxis = new NumberAxis();
    private final static NumberAxis yAxis = new NumberAxis();
    private final static LineChart<Number,Number> lc = new LineChart<Number,Number>(xAxis,yAxis);
    
    // Setup the response line chart
    xAxis.setLabel("Attempt");
    yAxis.setLabel("Response (ms)");
    lc.setLegendVisible(false);
    lc.getData().add(series);
    Any idea?

    Gabor

    Maybe a bug, maybe a "function". Add the series before you set the caption visible-fake.

    // lc.setLegendVisible(false);
    lc.getData().add(series);
    lc.setLegendVisible(false);
    

    DB

  • Impossible to disable the menu bar black in El Capitan

    An application that I used works option "menu bar black" of OSX and while I like it better than the light menu bar some of my menu icons are not visible in dark mode and so I would like to disable. However, the problem is that I can't. Whenever I have untick "use the menu bar black and anchor" setting in system preferences > general, nothing happens. Then when I close the system preferences and open it again, I find that the box is checked once more. (I also uninstalled all traces of the original application that made that change, reinstalled, tried to turn the option off, clear again, etc. - all without success).

    I tried to check in the Library/preferences /. GlobalPreferences, but it doesn't seem to be an option for this setting (while I can see the setting to hide the menu bar).

    Any ideas?

    Try

    remove parameters by default g AppleInterfaceStyle

Maybe you are looking for