RV042 stopped working

Hello

I have the following problem:

My rv042 stopped working after about two weeks.  The configuration looks like this:

Belkin Wireless Pre - N in bridge to port 1 mode

-RV042 1 computer connected to port 2

-Cable modem Internet

-DSL Modem in bridge of dmz mode

* The router works with the embedded firmware, it's never been flashed.

Everything worked very well for about two weeks and then suddenly stopped working.  I used the system in time.  Things just disappeared.  I tried the following:

* manually Computer Configuration to an IP address on the network instead of DHCP

-No connectivity. Failed to contact the router at all.  Cannot ping it.

* Power/disconnect router and wait 1 hour before feeding this back.

-No connectivity.  Failed to contact the router at all.  Cannot ping it.

Perform a reset of the modem

-No connectivity.

* Perform the reset of the modem. Reconfigure the computer.

-No connectivity.

* I tried with several computers.

* I can connect the computer directly to a cable modem and internet access.  Cable/internet is so direct.

* When computers are not assigned an IP address in DHCP mode.  Running "ipconfig / renew" cmd prompt fails with timeout.

* When configured manually, I cannot ping the router on 192.168.1.1

* No warning on the router light.  All the lights seem to be good.  When it is connected to the Lan 1 and Lan 2 lights flash constantly to any interval of 1 second.

Can anyone think of anything to try with this?

Thank you.  I managed to solve this problem by taking the following steps (found on another post here):

(1) turn off all computers, the router and the modem and disconnect from the wall.
(2) disconnect all the wires of the router.
(3) turn on the router and let it start up completely (1-2 minutes).
(4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
(5) turn the router.
(6) connect a computer cable to port 1 of the router (NOT to the internet port).
(7) turn on the router and let it start up completely (1-2 minutes).
(8) the power of the computer (if the computer has a wireless card, make sure it's off).
(9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
(10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

(11) reload saved config.

(12) connect 1 modem at the same time and make sure they connect to the routers statuspage.

(13) connect one computer at a time until all are connected.

I never found a cause of this accident.  I turned more connection on the router in the hope I can find a cause if it happens again.  I hope this answer will help others.

Tags: Linksys Routers

Similar Questions

  • my iPhoto has stopped working

    My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

    What version of OS X (or, if all goes well, Mac OS) are you running?

    What version of iPhoto do you run?

    iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

  • My magic mouse has stopped working.   Is there a battery that I need to replace?

    My magic mouse stop working.   Do I have to replace a battery?  If so, how?

    If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

  • Some keys stop working after the update of the Sierra (only for a specific profile)

    After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

    The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

    Anyone know what that sometimes caused that and with the fix is?

    Hello ExcelsiorPath,

    After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.

    If the other keys do not work

    You may have accidentally set an option that changes your keyboard works.

    • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

    • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

    • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

      To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

    macOS Sierra: If your keyboard does not work

    Thank you for using communities of Apple Support. Good day.

  • Click force has stopped working

    Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

    I have checked all the options, rebooted the system, still no clear sign of what is the problem.

    Does anyone have the same problem? How to check weather force/pad touch works well?

    Any suggestions what to do?

    A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

    iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

    After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

    Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

    Possible only "close program"...

    Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

    All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

    Checked the event viewer:

    1. error message:

    Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

    Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

    Exception code: 0xc0000005

    Offset: 0x004f0e09

    ID of the process failing: 0xcc4

    Start time of application vulnerabilities: 0x01d218b3194e2f01

    The failing application path: C:\Program Files\iTunes\iTunes.exe

    Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

    Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

    2. Windows Error Reporting

    Fault of type 1024926102, bucket 25

    Event name: APPCRASH

    Answer: No available

    Cabin ID: 0

    Signature of the problem:

    P1: iTunes.exe

    P2: 12.5.1.21

    P3: 57cfb09f

    P4: WebKit.dll

    P5: 7602.1050.4.5

    P6: 57c11f7f

    P7: c0000005

    P8: 004f0e09

    P9:

    P10:

    Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support

  • Why auto unlock Mac with Apple Watch stop working?

    When I upgraded to first watch OS 3 and macOS Sierra, auto unlock Mac with Apple Watch worked. A few days change it has stopped working. What could have happened? I checked all the settings/preferences.

    Your Apple Watch is unlocked?

  • Function keys row has stopped working after update 10.11.6

    I upgraded my Macbook Pro to El Capitan 10.11.6 last week, and the row function keys have now stopped working.  If someone has had this problem and how can it be solved?

    Thanks in advance for your help (I'm not very tech savvy, so please, responses may be simplistic?)

    The keys work when starting recovery?

    On OS X Recovery - Apple Support

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • iOS 10 video playback stops working until you restart

    I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

    Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

    The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

    Hello, Sunkai!

    Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

    I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

    Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

    1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
    2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
    3. Try a different network.
    4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
    5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

      Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

      If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

    Have a great day!

  • Target display mode has suddenly stopped working

    I've been using display mode target using a cable thunderbolt between my iMac 21.5 inches (end of 2012) and Macbook Air 13 inch (early 2014) for about six months.

    I had a few weeks off and had to return to find that I can enter is no longer target display mode! When I press Control-F2 on my keyboard connected to my iMac, that nothing is happening. I also tried Fn-control-F2. I tried different ports in case one of them is damaged. But nothing helped.

    Anyone has any suggestions as to why target display mode would have stopped working so suddenly? I really like the feature of double screens between my macbook and iMac and would really like to come back!

    Thank you.

    I know target Display Mode will work, but only if I use the command-f2 from the login screen. After the connection, the command does not work. have you tried?

  • iMovie has stopped working since iOS 10

    iMovie has stopped working since iOS 10

    Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it

    Hello iMovie does not work,

    After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
    I recommend you read these articles, there are a few things that we can try to get the application running again.

    Force an application to close on your iPhone, iPad or iPod touch - Apple Support
    Restart your iPhone, iPad or iPod touch - Apple Support

    If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

    Thank you for using communities of Apple Support. Good day.

  • Error "iTunes has stopped working".

    After update itunes to the latest version of 12.5.1.21, its does not and always give an error like "iTunes has stopped working". Even I tried to reinstall the same version and earlier versions of it. Always the same question.

    Kindly resolve.

    Bene-

    Hello, this article could help you Fix unexpectedly closes or launch issues in iTunes for Windows - Apple Support

  • My hotspot stopped work

    Hello world

    recently my disapear hotspot for other devices

    and can not connect not connect with laptop computer,

    Besides he worked wel Yesterda suddenly stopped working and can connect again; t)

    Really I need your help :)

    Hello ahmedalgazar,

    Thank you for your question on other devices not being not able to find your Personal Hotspot here in Apple Support communities. I understand how it is important to have access to the internet for your other devices. Here are the steps I would recommend starting to get this working again once you were waiting for.

    The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

    Once your data is safe, please open this help article: get help with Personal Hotspot in iOS. This article has every step to try in order on your device and also includes some things to check on the other device who does not see your Personal Hotspot.

    Thanks again for checking the communities Support of Apple. Have a great rest of your day.

  • iTunes store stops working when I click on the store

    Hello, I am continuing windows 7 64 bit and I've just updated to 12.5.1.21 and my laptop says itunes has stopped working and I have to close the program after I click on the store. I can see my music and play but can't go to the store. Under details, he said:

    Problem event name: APPCRASH
    Name of the application: iTunes.exe
    Version of the application: 12.5.1.21
    Timestamp of the application: 57d32fa7
    Fault Module name: WebKit.dll
    Fault Module version: 7602.1050.4.5
    Fault Module Timestamp: 57 c 12000
    Exception code: c0000005
    Exception offset: 0000000000645e36
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 1761
    Additional information 2: 1761434aed254db142ae93beb247cc5f
    Additional information 3: 6ca 1
    Additional information 4: 6ca18a1a75b11fdbffdfc657fe0130df

    I tried redownloading/install and repair and restart my cpu, but nothing seem to help.

    Thank you

    Hello bigeasy19,

    Thank you for contributing to the communities of Apple Support.

    It seems that iTunes quits unexpectedly on your PC after updating to the latest version. Reinstalling and repairing the app are good steps, and we can offer some additional troubleshooting to help solve this problem.

    Then follow the method on this page to narrow down the cause of the problem: Fix unexpectedly closes or launch questions in iTunes for Windows.

    Best regards.

  • EMagic Logic Control has stopped working

    I have havn´t been using my Emagic Logic Control for a while and as I wantted to use it it didn't work any more.

    EMagic Logic Control doesn´t appear in the configuration of logic controller, but the Jog Wheel works?

    Mac Pro early 2012

    Unitor 8

    RME Fireface 800

    EMagic Logic Control - v 2.1.2

    Logic Control XT eMagic

    OSX 10.11.6 (El Capitan)

    9.1.8 logic (64-bit)

    I tried on:

    trashing the prefs and controller logic Surface prefs, then restart

    2 different midi interfaces

    different midi cables

    different supplies

    tried to re - install the 1.02 update firmware with no success

    also, another computer running OSX 10.11.6 and logic 9.1.8 (64-bit)

    Switch between mode Mackie and logic

    When I turn on Emagic Logic Control, it passes through the calibration Fader without problem, but doesn´t go further and sees no logic, but Logic Control XT Emagic is considered by the logic.

    It seems that the midi input does not work.

    You have any ideas? Maybe it s a hardware failure and I should try to find spare parts?

    Well cordially

    Henning

    EMagic as a society has not existed for so long now and their products have not been updated for so long, I think that it is no longer compatible.  He did stop working with an upgrade of software of any kind?  Yes, it's going to be difficult with this type of old hardware.  I would have the Unit checked out by someone who knows how to check what works and doesn't work inside.

Maybe you are looking for

  • Techalpunto won't go away all that I do.

    Today, everything was normal. I left the PC on when I went to training and not only hit one. When I'm back and open Firefox (and Chrome also but not Internet Explorer), the home page was "http://techalpunto.net/". This has never happened before, so I

  • Flashes and a beep on Satellite A660 - 11M

    Hello Is about 3 or 4 months ago, I bought a new Toshiba Satellite A660 - 11 M.I noticed the following problem: lights from time to time my laptop occasionally fade or turn on (lights on Toshiba panell, the word 'Satellite' and the line on Touchpad)

  • image control

    Hi, I need to capture an image to my front. I would like to use image control nodes to control the brightness of the images. However, I can't enter the image directly. All the entries are appreciated.

  • I get errors when you try to download Windows Live Messenger

    Original title: Hello Hey iam trying to download windowslive messenger for my pc and an error has occurred I have Windows XP Home Edition Version 2002 Service Pack3

  • Fading blue light still does not light

    The blue light on my pc Tower after will not be used for a period of time fades in (I think it's in mode 'sleep'?) anyway it will not light back? I touch the mouse... nothing. The keyboard... nothing. I press the power button... nothing and if I pres