RV082 resets
Hello
We have a router RV082 this reset of days he has started some himself after normal use.
The simpton is that when people came to the office, from the use of Internet the RV082 resets. It remains online for 3 to 12 minutes, and then put it back again.
I solved the problem by:
-Click on Reset to Factory Default in the web interface
-After the reset, I confirmed that it was reset reset again using the default factory reset button
-manually reconfigure the RV082
I also tested with an another identical RV082 (hw and the firmware version) and after making a backup of the original rv082 config and restore in the new rv082, the same problem happends.
So my question is: why is this happening? And how to avoid to happen again?
Thank you very much
Oliver
The RV082 is the Cisco Small Business Support Community.
For future discussions about this product, go here.
Tags: Linksys Routers
Similar Questions
-
I'd like to collect the statistics accumulated over several days, although the router seems to be reset the counters to zero every 24 hours or more.
I can't figure out how (if) I can disable that if counters continue.
The number of bytes on the statistics page is a 32-bit counter that cancels to 0 when the count reached 2 ^ 32 bytes. You should maybe take this hour meter samples and use graphic software to take into account discontinuity.
-
Can RV082 password lost, I get my backup configuration file.
I forgot my rv082 of admin password, but I have a backup configuration. password can be decoded to him?
Thanks for any help!
No one really knows what information is in the backup file. In general, are stored passwords that do not need to be transferred elsewhere encrypted and cannot be decrypted. Most likely, you need to reset your router to the factory settings. But you can try asking your question in the support community Cisco Small Business for routers. The RV082 is now part of Cisco Small Business and there is few people Cisco who can check with the developers...
-
Retrieve the current configuration of RV082 without username or password?
I just started a job in a factory of critical infrastructure in which the previous person in my position has several things to put up with almost no documentation. Given that this plant is critical infrastructure, I need to be careful in what I have mud around with. At present, the plant has no internet access (it is not necessary for the functioning of the plant) because the gentleman, I replaced a RV082 has implemented and used for VPN tunnel to the network. He is now on disciplinary leave, probably never to return, and we make sure that it cannot gain access to the factory. I don't know if we need to have access to the plant while off site, but just in case we do, is possible to get the Setup running off this device while not knowing the user name and/or password? I really do not wipe out, but I guess I can, if there is no other way.
Thank you for your time.
Tim Bennett
Hi Timothy, unfortunately without username/password the device will have to be reset.
-Tom
Please mark replied messages useful -
Experts,
I read a few threads on how to configure the RV082 with a DSL modem. I put the modem in 'Transparent bridge', have entered the Cisco RV082 PPPoE data, but cannot get an internet connection with the RV082. I find myself the DSL at default reset and hand over the WAN on Auto connection on the router. Y at - it a trick? I have power drove the RV082 (felt as a stage in one of the threads that I've read), but which does not work either. If I can't get the internet connection, then I can't go forward with the configuration and activate the vpn service that I need to put in place. Someone at - it other advice?
Rustin,
You can call your ISP, because I'm not complete on the way to fill this device. You can use GOOGLE and search for your model number of modems and what you're trying to accomplish before calling your service provider. Usually a lot of blogs out there with clients who are trying to accomplish the same thing.
According to the model of modem, it can only support bridge Transparent mode, while leaving the modem to do authentication for the service provider and defining our router (static IP) putting in an address public ip, subnet mask, gateway, dns provided by ISP servers.
I plug my PC directly to the modem and call the ISP and tell them you need a public ip address on this pc. Many times ISP tell that cannot support a configuration when there is another router, well that's why we plug your pc directly. Once you have a public ip address on your PC. Simply copy this information into our router, and you should running.
Thank you
Support Cisco engineer
-
Problems of DNS with RV082 and OSX Lion
Hello
I have a problem with DNS resolution, using a Mac and a router RV082.
I use the Google DNS, it manually until 8.8.8.8 and 8.8.4.4
The simpton is that DNS resolution is slow or fails in the Mac App Store, Firefox, Safari, etc.. I once solved this in hard reseting the RV082 and get to the page were it ask a firmware and does not work until you download the firmware.
I did this same procedure, but no longer works. Everyone knows this too?
Thank you
Oliver
Hi oliversl1,
Thank you for posting. Please provide additional information:
- What type of internet connection? (Cable, DSL, T1)
- No matter what Windows PC? If so, it works ok?
- A new hardware version 3, is the RV082? If this is not the case, do you know how old he was?
- What version of the firmware?
Please as well see the following:
https://supportforums.Cisco.com/thread/2022782
We also had a problem with Mac computers and RV0xx which has been tentatively scheduled by a downgrade of firmware. I think it was firmware version 1.3.12.19 - tm who had problems with the Mac.
-
I need to change my security issues and said we do not have enough information to reset your
I need to change my security but said Questions we have insufficient information to reset security of your apple ID questions.my is [email protected] I want to slove this problem please help me
You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(145174)
-
I can't reset the security questions. We received notice as below:
Hello world
I can't reset the security questions. We received notice as below:
"Cannot reset Security Questions."
We have insufficient information to reset your security questions. "
Please help me as soon as possible! Thank you very much.
Hello
You will need to contact the Apple Support.
The information is available here:
Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
(I'm afraid that no one here can solve the problem for you - this is a user-based community).
-
Factory reset - the download size
Hi all
I want to perform a factory reset on my Mac and I wonder if I need to be connected to the Internet to do this? If this is the case, what download size I look? I have only 10 GB of data through my ISP.
Thank you.
It is about 5 GB.
-
My preferences iCloud lost password! How can I retrieve or reset?
My preferences iCloud password is lost! How can I retrieve or reset?
It's the same as your password Apple ID.
-
13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
iPhone instead of resetting screenshots
Hi all, I have an iPhone 7 that works fine apart from the fact that I try to do a soft reset (hold power + "home" button) it does nothing except when I release the buttons it takes a screenshot.
Apart from that I have no problem using two buttons and the phone works very well, I can't do a reset (which I think I may need to do iron on some software quirks)-I tried holding it for as long as possible, but after a minute, the screen automatically goes mode sleep If I released before then it's just takes a screenshot.
Have also tried pressing both buttons in various orders, but same result no matter what.
Any ideas?
The iPhone 7 uses the button On / Off and Volume to perform a reset button.
-
The question is classic to be fun:)
I write from the Ukraine. Unfortunately we do not have official support from Apple here. So, a year ago our company bought an Iphone 6 S more for my boss. Therefore, the corporate device. Now my boss wants to give this device to his little girl. But we suddenly discovered that identifier Apple of this unit belongs to the person of the it Department that does not not working with us for a year. Now, we cannot attach it to request the ID and the password and can not ask him to delete this device from its iCloud.
We therefore have to reset previous apple ID to use the phone successfully.
This iPhone was purchased by our company and we have documents from the Department account to prove that the device is really for us. Please find screen of the iPhone and documents as an attachment.
Let me know please, what additional details you need.
Thank you in advance,
Diana
Follow these suggestions to resolve the problem, disable find them my iPhone Activation Lock - Apple Support
-
Is it possible to reinstall or reset the internal microphone of an iMac?
Some background information:
27 "iMac 5K (end of 2015) running OS X El Capitan (when the problem started), to give birth to Sierra of MacOS. Also have a Bootcamp with Windows installed 10 partition.
A month ago, when under OS X, I noticed the internal mic produced some static when you try to use it. Audio messages in voicemails would be static instead of my voice. The weird part? If I switched to Windows 10, the internal microphone works without any problem. I can ask questions of Cortana, I can record voice messages and they read without static electricity. In fact, no matter what I use the microphone internal to in Windows, it works perfectly.
Sierra of MacOS is out, so I hope that this update may be a BONE would settle the matter. Nope. Internal microphone still does not work on MacOS, but still works perfectly in Windows 10. It is because of this that I am positive the internal MIC is not broken or have a loose wire.
I went through a few steps to try and fix the internal microphone, such as resetting the SMC... but nothing has worked. Any help or ideas on how to solve this problem would be greatly greeted.
Hello dear user
Thank you to use Apple support communities
My recommendation would be to take it to an official Apple store, workers are espceialists, they might be able to fix, make sure also that you have never removed the water on top of the mic. In my iPad, a drop of water directed the music video of speaker if she never exceeds 30% volume of the music.
But if you don't have a store nearby, uninstall malware and unnecessary software, make sure that you don't have a program that allows you to change your sound (like Skype) systems, if you don't do that this program has no impact on your microphone. (I used to have Skype but it also makes audio cut so terrible, piano music sounded like heavy metal music, so heavy metal music was like to...) I don't know what to say.)
-
Cannot reset the Security Questions
Hello my dear
-J' forgot my account security questions, but I remember password
And I'm changing my Security Questions, but show me this sentence
"Cannot reset Security Questions."
We have insufficient information to reset your security questions. "
-I want to solve this problem as soon as possible if permitted
Maybe you are looking for
-
is their any difference between the appearance of firefox 5.0 in vista and xp?
I see a picture different firfox 5.0 in the site relative to the one im using it.
-
Portege Z30 - A - 18 M - unavailable two-finger tap
Hello I just bought the Z30 - A - 18 M and (of course) love it! The only thing that bothers me it is the inability to tap with two fingers to right click and click on three fingers for a midfielder. I saw some people describe the two fingers tap and
-
Hello!I want to improve my Japanese friend by adding 1 GB of RAM, but I can't find the info. I need toshiba code for that memory. Plizz help!
-
How to get out of the callback function key before it complete the LabwindowsCVI
Hi all In my program I use the command button (called SCAN) to analyze the setting on the serial port. When I press SCAN button callback fuction starts to send command on the series for the scan on the serial port setting. There are 99 order send and
-
Microsoft Flight Simulator Deluxe Edition
I've never updated this softward game since I bought it several years ago. What improvements should entry to make it current?