RV220W v1.0.2.4 - MIB files?

Similar Questions

• Need for Mib files for Toshiba estudio 16 series printers

  Hello
  I need the Mib files for printer Toshiba estudio 16 for my project. Please help me how to do the same.

  Thanks in advance.

  Concerning
  Emilie

  Hi Ravi

  Toshiba estudio 16 printer is not known to me and you will be very happy if you can find help here (for most of the themes of laptop). Google all over the place. Maybe you will find something at least on the net you can find almost everything.

  https://www.Aneka-INFOKOM.co.ID/Copier/?page=view&ID=10 try to contact dealers for more information.

  Good bye

• What necessary SNMP MIB file

  Does anyone know where I could find information (MIB) machine for Toshiba MFP devices file. I googled had and checked the predominant sites for these types of files. I'm looking to get the OID for an eStudio-600 so I can configure the SNMP interruptions for alerts of toner and paper jams.

  Thank you

  Mike

  PS: I put here as a matter of SNMP network, if it's wrong please feel free to move it to the right forum.

  In my opinion, this forum is wrong place for this question. I think you should contact your local dealer where you bought your eStudio-600.
  They offer a type of support or not?

• Riverhead/anomaly detector in the MIB file module

  Hello

  I was unable to find the file for my SMA and AGA MIB, can someone show me the URL to get the file? Thank you very much.

  You should be able to find the current AGM/ADM MIB here:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/Cisco-AGM-crypto

  You will need a CCO A'idin order to access the above link.

  Scott

• PX2 - 300 d - where can I get the MIB for a LeNovoEMC PX2 - 300 d?

  Hello

  I would get the MIB for this product.

  Where can I get?

  Thank you.

  Bird,

  Just found this:

  If a client requests a mib file for SNMP implementation, this is the link to click:

  http:///manage/mibs/lenovoemcmib.txt

• Download SNMP MIB for Laserjet 5550 and 1505n. Paper, stuffing, etc.

  Please help me. I need the MIB files for SNMP messages as paper, jam, etc. Printers are LaserJet 5550 and 1505n. Rules of HP.

  Thank you very much for the help. I discovered a different way, but it's here:

  On the right side you can see the address and in the Middle, the data type and name. They are all in position 0.

  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperJam, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.9
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.8
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PeripheralError, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.6
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_ConnectionTerminationAck, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.5
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NewMode, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.4
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_InterventionState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.3
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_AtBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.24
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TcpBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.23
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LlcBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.22
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NovBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.21
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Reserved, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.20
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.2
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOutput, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.19
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Printing, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.18
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_DoorOpen, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.17
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Initialize, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.16
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Wait, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.15
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Busy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.14
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_IoActive, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.13
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_MemoryOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.12
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PagePunt, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.11
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TonerLow, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.10
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LineState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.1

  I hope it is useful for someone too.

  Best regards to all users of the forum!

  Cristian

• MIB (SNMP) library as vWorkspace 8.5 and 8.0 MR1

  Hi all

  I'm looking for MIB library to monitor a vWorkspace Envrionement 8.5 and 8.0 MR1 with PRTG monitoring software.

  I already searched inside a foglight installation, but this very difficult, causing thousands of MIB

  Are there recommendations or with the case of information (MIB) files.

  If you have any questions, don't hesitate to contact me

  Kind regards

  Thomas

  Hi Thomas,

  We do not have the MIB files specifically for vWorkspace environments because I believe that we do not support SNMP.

  What exactly you were trying to monitor? The built-in Diagnostics monitoring vWorkspace & who uses WinRM (or WMI) should give you everything you need to monitor your environment vWorkspace. He oversees infrastructure vWorkspace (hypervisors, VDI VMs, RDSH and from 8.6 RDL and WSM), user session and applications performance and also allows you to establish a correlation between the performance of the system with the user sessions and the ecosystem integer vWorkspace.

  If you only want to use PRTG monitoring, I don't know how it works unfortunately. Do Paessler / PRTG have best practices on how to integrate with existing management platforms (other than SNMP MIB files)?

  Thank you

  Sam

• 8164F MIB

  Anyone know where I can download switches for PowerConnect 8164F mib files?

  I want to be able to monitor the Boolean parameters in our monitoring system (PRTG), but I need for this mib.

  The MIB can be found in the download for the firmware.

  http://www.Dell.com/support/drivers/us/en/04/product/PowerConnect-8100

  See you soon

• Looking for MIBs to various devices of PowerVu

  I scoured the cisco.com site looking for MIB and apparently they aren't there or I can't find them.  I'm looking for MIBs for following PowerVu equipment...

  D9854

  D9828

  D9850

  D9824

  D9858

  Thank you!

  Bob

  Bob;

  You can access the file Exchange Server on:

  https://upload.Cisco.com/cgi-bin/SWC/fileexg/main.cgi?CONTYPES=SPVTG_CSW_DMN_SUPPORT

  You should be able to find your MIB files.

  Fred

• SG500-52 or SG500 - 52p regarding the update of MIBs

  What is the download of MIBs_Sx500_v1.4.0.88 for?  I currently do all my switches come to 1.4.0.88 Firmware version.  Do I need to update my SG500-52 or SG500 - 52p switches or is it for something else.  According to me, only they call it MIB download page management switch.

  Please advise and thanks,

  Hello

  It may be a little late for you, but for someone else: MIB files are related to the SNMP management and unless you use your SNMP server, you do not have to download when upgrading the firmware and boot code.

  Kind regards

  Aleksandra

• Y at - it any OID for Windows XP?

  I want to follow my windows XP via SNMP client, is there any MIB file where I can find some OID for Windows XP?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.
   
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Mau also consult you the following links for more information:

  http://support.Microsoft.com/kb/287547

  http://TechNet.Microsoft.com/en-us/library/cc776379 (WS.10) .aspx

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_snmptopnode.mspx?mfr=true

• 5548, 7048 - PowerConnect backup SNMP configuration

  Hello

  I Powerconnect 5548 and 7480 switches and I would like to know if it is possible to backup with TFTP and SNMP commands configuration files, like I do with my cisco switches?

  Thank you.

  You should be able to use rlcopy which is OID.1.3.6.1.4.1.89.87

  Location of the source Rlcopy.1.3.6.1.4.1.89.87.2.1.3

  Rlcopy the ip address of destination.1.3.6.1.4.1.89.87.2.1.9

  Updates of the firmware also contain the mib files, so you can find the OID http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=JRCF6&fileId=3365034200&osCode=NAA&productCode=powerconnect-5524&languageCode=EN&categoryId=NI

• PowerConnect 2824 - SNMP monitoring

  Hello

  I want to monitor the State of a switch Dell PowerConnect 2824 using SNMP. I have trouble finding the proper MIBS.

  Edit: I managed to access the switch through the web interface and am SNMP receives traps as expected.

  2) whose identifiers are available for monitoring: power, temperature, load, connections, faults, etc.? Where can I find the MIB files? Or documentation explaining the use of more detailed?

  Advice or documentation links are appreciated.

  Thank you.

  The MIB file is included in the download for the firmware.

  www.Dell.com/.../drivers

• [Problem] SNMP on the Dell Server

  Hi all

  I am currently managing a lot of Dell servers: M620 R720, M610, R610, r.620... I use SNMP to collect information from my servers. I have some problems with SNMP:

  I have setuped a collector (CentOS) server and the MIB file complete (10892, sotragemanagement, SMIv2-iDRAC, iDRAC-SMIv1...), using snmpwalk to collect information of agent (CentOS). On the agent server, I already have setuped OMSA agent, full mibs (10892, sotragemanagement, SMIv2-iDRAC, iDRAC-SMIv1...) and all the services work properly:

  status of /etc/init.d/dataeng # [root@agent MIB]
  dsm_sa_datamgrd (43827 43770 pid) is running
  dsm_sa_eventmgrd (pid 43879) is running
  dsm_sa_snmpd (pid 43938) is running

  * From collector server, I used the command:

  [root@collector~]# snmpwalk-v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.1

  MIB-Dell - 10892:mIBMajorVersionNumber.0 = INTEGER: 7
  MIB-Dell - 10892:mIBMinorVersionNumber.0 = INTEGER: 3
  MIB-Dell - 10892:mIBMaintenanceVersionNumber.0 = INTEGER: 0
  MIB-Dell - 10892:systemManagementSoftwareName.0 = STRING: "administrator of the server.
  MIB-Dell - 10892:systemManagementSoftwareVersionNumberName.0 = STRING: "7.3.0.
  MIB-Dell - 10892:systemManagementSoftwareBuildNumber.0 = INTEGER: 1

  ........

  -> OK for 10892 mib

  * It's OK with 10893 mib (storage management).

  * But when I used ooid to iDRAC-SMIv2 mib, iDRAC-SMIv1 mib, it wasn't OK

  [root@collector ~] # snmpwalk m all - v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.5
  IDRAC-MIB - SMIv2:outOfBandGroup = No. Such Object available on the agent to this OID
  [root@collector ~] # snmpwalk m all - v2c IP - c Mi725005d1 1.3.6.1.4.1.674.10892.4
  IDRAC-MIB - SMIv2:server3.4 = No. Such Object available on the agent to this OID

  Can someone help me with this problems?

  Thank you very much

  Nampnx

  Hello Nampnx

  Are all the other OID of work or their absence from the out-of-band DIO works?

  10892.5 does not have an OID assigned to him. It's just a group, the message cannot find an OID so that it is normal. I also do not show 10892.4 as valid an OID.

  Do you have a valid return with:

  Group Information RAC
  Group of RAC Information objects provide information on iDRAC.

  Table 2023.

  Name of the CAR

  Name racName

  ID of the 1.3.6.1.4.1.674.10892.5.1.1.1.0 object

  Description this attribute sets the name of the product of a remote access card. The StringType read only access syntax

  Or this:

  Table of 1973.

  Message ID

  AlertMsgID of variable name

  ID of the 1.3.6.1.4.1.674.10892.4.5000.10.7 object

  Description Specifies the message ID improved for the object generating the alert. Syntax DisplayString

  http://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_ent_sys_mgmt/esuprt_ent_sys_mgmt_opnmng_svr_admin/Dell-opnmang-Srvr-Admin-v7.4_Reference%20Guide3_en-us.PDF

  Thank you

• Problem with WLC and a 3rd-party NMS SNMP AP Assoc/cancellation interruption

  Hello

  I'm troubleshooting an issue, why our NMS is not able to automatically clear an alarm generated trap of an AP that has been separated and is associated with again.

  When debugging on the WLC snmp trap generation, I discovered that when the AP disassociates the WLC sends the trap of bsnAPDisassociated , which is perfectly defined and I can also find in the SNMP Object Navigator. However when the AP reassociates again the WLC sends the ciscoLwappApAssociatedtrap.

  Part 3 NMS is not able to understand it, but our WCS system does, that's why I then took a peek in the MIB file installed.

  I discovered that ciscoLwappApAssociated is a sheet of ciscoLwappApMIBNotifs (1.3.6.1.4.1.9.9.513.0. 4), which I have neither

  Cannot be found in the Cisco SNMP Object Navigator or the downloadable MIB.

  As the MIB in the WCS is a XML file I didn't how to get information in the 3rd-party NMS.

  Anyone have any idea on how to solve this problem or there at - it update CISCO-LWAPP-AP-MIB available somewhere?

  Our WLCs are running the latest version of the software (7.0.116.0) as well as our WCS (7.0.172.0)

  Thanks in advance!

  Kind regards

  Patrick

  Such discrepancies sometimes occur. Best is a matter of TAC in order to tackle the problem through a bug or have a new MIB published on cisco.com if necessary