RVS4000 V02 IP based ACL does not


I have a RVS4000 v02 and created 3 VLAN -, and  I tired to created list IP based to deny network access and access to; and deny access  Can you help me check my list of ip-based access?

MY RVS4000 access LIST

Refuse any protocol LAN at all times every day

Refuse any protocol LAN at all times every day

Refuse any protocol LAN at all times every day

Allow to All services LAN ANY ANY Anywhere, anytime Daily

Allow to All services   WANALL ALLall timeevery day        

* all access list is enabled.

Network time and can still reach network.

Hope you can help me understand this.


These products are processed by the Cisco Small Business Support Community.

* If my post answered your question, please mark it as "acceptable Solution".

* Do not forget to give a 'congratulations '. Thank you!

Tags: Linksys Routers

Similar Questions

  • HTML5 player based Soundcloud, does not work when they are embedded on my site. Why?

    SoundCloud HTML5 based widged does not display on my Web site when they are incorporated. It used to work, now there is only an empty contained area. It works on Chrome and explore.

    Anyone have any idea why is - this? Really need help.


    You can post a link to a public page that doesn't require authentication (login) to access?

    Have you checked the server sends the file with the correct MIME type?


    AddType audio/ogg oga ogg
    AddType video/ogg ogv
    AddType video/webm .webm

    A good place to ask for advice on web development is to the 'Web Standards Development/evangelism' MozillaZine forum.

    Aid to this forum are better informed on issues related to web development.

    You must register on MozillaZine forum site to post in this forum.

  • PowerConnect 6200 ACL does not seem to work


    I have a total of four 6248 s two groups at different locations that are configured with VRRP + OSPF.  I tried to set up a simple ACL on either a VLAN to allow a portion of the traffic and block everything else, but I can't make it work.  I have tried many combinations to try to get this working, but so far without success.  It's just a simple ACL, which should allow the web/http traffic on the server and blocks everything else.

    The only type of ACE that seem to work are either a "deny ip any any" or "permit ip any any" If you try an ACE with a destination host and subnet mask it's just all this blocking.  Has anyone else had problems of the ACL or is it just my incompetence in preventing me from getting the 6200 ACL work properly?  I didn't have this problem, get the ACL list to work on our Cisco 2811 routers, just at the moment where I tried on the PC6248s.

    1. config
    2. int vlan 720
    3. no ip-group vlan720-in in access
    4. output
    5. No list of access-vlan720-en
    6. access-list vlan720-in permit tcp any eq 80
    7. int vlan 720
    8. IP access-group vlan720-in in
    9. output
    10. output
    11. copy, run start
    12. There

    Just an update on this issue.  I worked with Dell to determine why the ACL does not seem to work.  We discovered that the 6200 apply ACL to the traffic as a VLAN ACL Cisco card as opposed to a router ACL entry.  This causes the ACL to apply to not only routed or transferred but also traffic switched in the same VLAN.

    This has been the source of my problems that my traffic is not limited to a single 6200.  I developed a simple laboratory to check that the 6200 applied traffic switched in the same VLAN ACL.

    First the 6200 has one ACL applied to VLAN5 both PC1 and PC2 are in VLAN 5.  They are both on the same subnet  The ACL has a statement of "permit icmp any one" but nothing else.  The PC1 and PC2 are running Windows XP Pro with IIS is installed for the test.  The firewall on both is disabled.

    PC #1 IP:
    PC #2 IP:

    |    |
    |    |
    |   [2950T #2] <-->[PC #2]
    [2950T #1] <-->[PC #1]

    In this scenario PC1 and PC2 can ping each other without problem because of the permit icmp any any statement, but you cannot access the IIS site on each of the other computers.

    Dell said that this is normal and if you want communication VLAN VLAN you 'license ip ' to make it work properly.  I also found that traffic back from other VLANs were also denied because of the ACL applied on all of the incoming traffic.  As a solution, the license statement should be included for ALL traffic back to the limited subnet other subnets.  So in this case "ip enable any ".

    I find it a bit annoying that ACL is applied in the form of maps of VLAN not like real incoming router ACL as they are on similar Cisco devices as the 3750.  So there is a work around.  I hope they can solve the problem in a future update, because I really think that the 6200 is a great device.

    Here you can see the difference between VLAN ACLs cards and router entry ACL where they are applied in what concerns local traffic to VLAN.

  • ACL does not proxy IDs in two tunnels

    Hi all

    I get an error "ACL does not proxy IDs" that I am not able to solve the problems, google with lots of results, tried some; but nothing is applied.

    I have 2 tunnels of installation,
    1 / as a pix 515e (office) for an ASA 5505 (hosted server) for my guys access the hosted server
    2/A then that of the ASA 5505 firewall to my client so that its equipment can reach the hosted server and from the hosted server reach equipment.

    The two tunnels are working well, my problem comes when I try to reach my customers my office equipment, IE cascade tunnel.
    Setup was done (part of it) with the help of external professional services, and when we did a test, it seems that it worked... Seems because we did a test only and as I can then I wonder if in fact he ever worked!

    It is the first time I'm trying a few tunnels, no problems with other virtual private networks, I built cascade.

    I associate myself with the configuration of the pix and asa and an excerpt from the syslogs showing error, hoping someone could tell me an obvious mistake, that I have not seen!

    Do not hesitate to request the missing information which could be useful and thanks a lot in advance for your help!



    NAT is done before the crypto, for many reasons, flexibility more than anything.

    I checked the ACL and still see an incompatibility, I mean the number of ACLs and their content MUST match the only difference is that source and destination must be exchanged between the two.

    Until you correct this it's always going to be failing

    Once you to it, you may try check where it fails by referring to a reference I posted some time ago?

    Can you gather may be to debug it as described here:



  • Xcode is based, but does not work

    Hi people,

    I have a problem with Xcode

    When I try to launch a project, it generates correctly and then just says "running < name >: < name >»

    Some time previously, I have worked on some projects of iOS and at the time, everything worked fine.

    Not even that, they run more.

    I don't know why it stopped working in the simulator of the app is just a white screen.

    Mac OS projects with cocoa does not even launch the built application. Console applications do not work or the other.

    I had this behavior with XCode 7, then tried the beta version 8, which also had the problem.

    This morning, I decided to uninstall XCode and reinstalled version 8 of XCode from the App Store.

    The problem persists there.

    IM under OSX 10.11.6 and Xcode Version 8.0 (8A218a).

    Please help me, I'm getting desperate. I can't develop this way.

    Best regards


    I would check to see if there is a modal dialog box, asking you to authenticate before running your application:

    If you don't authenticate you request probably will not work

  • Update based Widget does not not on actual devices


    Recently I've developed a gadget application that uses the Focus Navigation function, and everything seemed OK (I completely tested the application using Simulator) until I deployed the application on a real device, the app interface consists mainly of tags tr with blackberry-Focus = true and onclic event properties to do all the magic happens, I use the CSS hover property to change the background tr image when she get the focus.

    The problem is that when I installed and tested the application on a real device, this effect does not work, looks like the RT focus but there is no visual changes, I tested on physical devices Bold 9000 and 9700 "Bold".

    This is one of my HTML tables:

    All the elements
    Add a new item

    And my css:

    . ListItem
    color: #FFFFFF;
    text-align: center;
    Width: 480px;
    height: 30px;
    background: url("..) ("/ img/itembgnd.png") no-repeat 0 0;
    . ListItem:hover
    background-position: 0-30px;

    Any advice will be appreciated.

    Thank you.

    I'm not sure if the hover tag is supported or not, I know I couldn't it work the way I wanted that this well. However, you can use the onmouseup and onmouseover. BlackBerry reads in the same way that you are trying to use.

    I think it's how I did it but I now have another project and don't want to close it...


    Just treat the blue link outline in css...

  • When a sample plugin based, but does not load

    Is there some common reasons why a plugin of the sample (in this case, CS6, Mac OS X 10.11, Xcode 7) will build without problems but does not load in Illustrator? In this case, I am a student in MultiArrowTool, but it will not load. I have not found any place where I can set a breakpoint to see where it fails, so it seems that AI CS6 rejects before even any code. At first I thought she might need a separate UI installed, but none was provided with the sample project. Any suggestions would be much appreciated!

    Have you tried to put a breakpoint in PluginMain in Main.cpp? If the plugin fails silently, it is normally because this function returns an error code when it receives the startup message.

  • External ACL does not increment for traffic allowed through the site to site VPN

    Hi all, we have many site - to IPSEC VPNS that are sending traffic to us successfully - the largest part of this traffic is FTP or SFTP.

    There is not configuration of the firewall of the SAA sysopt. Access lists have been configured on the external interface of the ASA to allow these VPN for FTP SFTP connections & - however, all counters are 0 when I do a 'show access-list internet-in' for FTP or SFTP.

    There are general IP entries in list of FTP & SFTP natted access connected to the Internet addresses of these FTP servers and these are increment but then there are certain customers who use the internet to transfer files.

    I guess what I was asking is ASA outside increment for traffic access lists allowed by VPN? The access list entries are for THEIRINTERNALIP to OURINTERNALIP (according to crypto card)

    Just to add that these ACL is configured through groups of objects in the case that matters - also once again that they are correctly transfer files to us - only I don't get where they are allowed.

    Thanks in advance


    VPN traffic is flowing properly and there is no ACL allowing UDP 500 or ESP?

    Can you post the output of "sh run all the sysopt"


  • ACL does not work in ECM11G

    Hi all

    I did a demo of the ACL on ECM11G according to

    my config.cfg is:

    UseEntitySecurity = true
    SpecialAuthGroups = Marketing, Public

    When I use weblogic to check in a doc with Marketing security group, assign User1 to right (r), then the connection of the User1, user1 found can always update the doc, what could be wrong?

    Best regards


    I think that the problem is "group1 is also defined as the role of man and has right RWDA for group of Public safety".

    I remember to have seen this. As the group "1" RWD "A"on the Public, the Admin level privilege allows any member group' 1 complete control, regardless of the ACL.
    Try limiting the privileges "group1" powered back on 'Public' and check the results.

    My recommendation would be to say two groups "PUBLIC_ADMIN" and "gorup1", where "PUBLIC_ADMIN" should have RWDA on Public and "group1" should be RWD.
    Now you can add all users in the Organization of "group1". When they will be added in the ACLs (on a folder/content), they'll be atmost get RWD.

    However, given that the number of ADMINs is limited, if someone doesn't need it comes later, you can add them to the group 'PUBLIC_ADMIN' too.

    A caveat, however, is that PUBLIC_ADMIN will have full privilege on any folder/content in Public. To compare for example with the function of 10g projects, all members with RWDA on the 'Projects' security group and RWDA "prj" account access on all projects.
    Another I've seen so far is that anyone with RW will be not only able to write but also update ACL! Always check.

    I hope this helps.

    Kind regards

    Published by: Prateek Mohan on April 27, 2011 10:34

  • Out of browser-based Airhelp does not open in the network location


    I was wondering if anyone can help with the following problem:

    I want to activate the internal evaluators open my help based on a browser of AIR in a shared network location. Currently, in order to open help, examiners must proceed as follows (which seems quite complicated):

    1. create a folder on their local systems: \Macromedia\Flash Player\ #Security\FlashPlayerTrust.

    2. stick the folder in the file RoboHelp.cfg (containing the network path to my index.html AIR help file).

    I derived the steps above to the procedure provided for by http://help.Adobe.com/en_US/RoboHelp/RoboHTML/WS1b49059a33f77726-484da80912ce87f5f33-8000. html

    Is there a way to avoid having to do the examiners perform these steps in order to access using AIR on a shared internal network location?

    Looks like a very involved process to just check that others in the company can open and test it. Is they do not do this and they click on the index file, it seems that the help opens, but then hangs on a blue and gray box with a progress bar that never moves.

    Thank you!

    Hello again

    erinforum wrote:

    Hi Rick,

    Thanks for the reply. We use Tech Comm Suite 3 (Robohelp 9). We could continue on the road to examine the content of the PDF, but we need our QA reviewers the opportunity to test the output of Airhelp browser based in different types of browsers. That's why we want to display the files somewhere and give them the opportunity to open them in different browsers.

    Thank you

    In this case I might suggest that you find a way to deploy to a web server via a URL that is not published. Just provide the URL to your testers.

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7, 8 or 9 in the day!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

  • My Windows Vista-based computer does not start

    When I try to activate my computer is blue but the monitor button is still yellow and I don't understand why. It takes forever to turn on or it won't turn on, can someone please tell me what I can do to fix my computer, he got to the point that it wont even turn on. I try to press the button on the monitor myself and it turns blue, but then goes back to yellow and says: monitor to go to sleep.


    If when you turn on your computer appears nothing, including the Logo of the manufacturer or the Motherbnoard, but it seems that you have a hardware problem.

    "It takes forever to turn on or it won't turn on.

    "it's gotten to the point that it won't even turn"

    Who is; sometimes lights up or not al all?

    If "not at all"

    Monitor > cable > Port > that is either connected to a graphics card in a slot on the motherboard or integrated graphics hardware that is part of the motherboard.

    You can try swapping the monitor and cable. then the graphics card to see if they are OK.

    Do you receive "tweets" at startup.

    If under warranty, I suggest you contact the manufacturer of the computer.

    SE not under warranty and you do not have to work inside a computer, find a good local repair shop.

    See you soon.

  • POJO based accessIterator does not work


    I use version of jdeveloper.
    I created DataControl to Pojo and PojoService.
    It's getting called (see SOP) if I access myText class attribute Pojo Pojo DataControl (PojoIterator = > myText). The accessIterator is not necessary (attributeValues = > iterator)
    While it is not get called (can't see the SOP) if access via PojoService DataControl (PojoServiceIterator = > pojoIterator = > myText). -It uses accessIterator (attributeValues = > accessIterator = > iterator)
    Why the same haven't are called through the accessIterator well.

    / public class PojoService implements TransactionalDataControl, UpdateableDataControl {}
    public PojoService() {}

    private Pojo pojo.

    {} public void setPojo (Pojo pojo)
    This.POJO = pojo;

    public getPojo() {} Pojo
    return of pojo;

    public class Pojo implements TransactionalDataControl, {UpdateableDataControl}
    public Pojo() {}

    private String myText;
    private number myNumber;

    {} public void setMyText (String myText)
    System.out.println ("in setMyText:" + myText);
    this.myText = myText;

    public String getMyText() {}
    System.out.println ("in getMyText:" + myText);
    return of myText;

    <? XML version = "1.0" encoding = "UTF-8"? >
    < pageDefinition xmlns = "http://xmlns.oracle.com/adfm/uimodel" version = "" id = "untitled1PageDef".
    Package = "View.pageDefs" > "
    < Settings / >
    < iterator lie = 'root' RangeSize = '25' DataControl = "Pojo" id = "PojoIterator" / >
    < iterator lie = 'root' RangeSize = '25' DataControl = "PojoService" id = "PojoServiceIterator" / >
    < accessorIterator MasterBinding = "PojoServiceIterator" lie = "pojo" RangeSize = '25' DataControl = "PojoService."
    BeanClass = 'model. POJO"id ="pojoIterator"/ >
    < / executables >
    < links >
    < attributeValues IterBinding = "PojoIterator" id = "myText" >
    < AttrNames >
    < item Value = "myText" / >
    < / AttrNames >
    < / attributeValues >
    < attributeValues IterBinding = "pojoIterator" id = "myText1" >
    < AttrNames >
    < item Value = "myText" / >
    < / AttrNames >
    < / attributeValues >
    < / links >
    < / pageDefinition >

    <? XML version = "1.0" encoding = "UTF - 8"? >
    < xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1" jsp:root xmlns:f = "http://java.sun.com/jsf/core".
    xmlns:af = "http://xmlns.oracle.com/adf/faces/rich" >
    < jsp:directive.page contentType = text/html"; Charset = UTF - 8 "/ >
    < f: view >
    < af:document title = "untitled1.jspx" id = "d1" > "
    < af:messages id = "m1" / >
    < af:form id = "f1" >
    < af:inputText value = "#{bindings.myText.inputValue}" id = "it1' columns '150' = simple ="true">"
    < / af:inputText >
    < af:inputText value = "#{bindings.myText1.inputValue}" id = "it2' columns '150' = simple ="true">"
    < / af:inputText >
    < / af:form >
    < / af:document >
    < / f: view >
    < / jsp:root >

    Thanks in advance,


    you lost me in your question. See the 37 sample for an example of work



  • Error - NTLDR missing Windows XP Home computer does not start.

    Original title: XP-based computer does not start.

    XP Home does not start after I uninstalled a large file of Samsung mobile phone. I get a missing NTLDR error message and have had a System32 error as well, but there is no DOS prompt that would allow me to access anything whatsoever. Another problem is that I lost my installation CD. I initially bought this Dell PC nine over 6 years ago, so can provide identification details, if necessary program. Could someone tell me how I can make a recovery CD please? (No floppy drive not installed in the PC). To further complicate things (Yes, I know - I created many more problems that we all need), I have to keep my files on the hard disk, so cannot do a complete reformat, unless someone can tell how to save them somehow. My BACK skills could be summed up as "plodder inexperienced but determined!

    The file might be missing or it could just be that XP can't find it if your file system has somehow got corrupted.

    As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

    Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Your system have IDE or SATA disks?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    System32 error, you see, is what exactly?

    Depends on a few factors, there could be another copy of the file NTLDR in other places on your system, but you have to start on something to find out whether there is or not.

    After answering the above questions, I begin to make a CD from Recovery Console bootable XP by running a chkdsk/r, first on your HARD drive and then see what is left to do.

    Here's how:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

    This is not the same as recovery disks that may have come to a store to purchase the system.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:


    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):


    Here are some instructions for ImgBurn:


    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • Windows XP does not recognize my DVD players after uninstalling Norton 360

    After uninstalling Norton 360, my Windows XP-based computer does not recognize my CD-ROM/DVD-ROM drives.  Tried to reinstall drivers without success.  Clicking on driver, I get a drive not installed message.  Using the Manager, have uninstalled and reinstalled the drives without success.

    Try following the steps under "Windows XP" in the article following the MS KB:


    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • Windows Vista does not start in normal mode

    My Windows Vista-based computer does not start successfully in mode noirmal upward. I restart and it is very slow. Finally I can connect and my come almost all my desktop icons. Almost. At this point, it seems frozen. Left click and it becomes totally frozen, including the white frozen screen Milky wit the icons in a blurred background. At this point, I can nothing but disable it at the tower. Restore the system to an earlier point has failed. Any ideas?


    My computer is slow!


    List of troubleshooting for a slow computer


    What to do if your computer is running slowly


    04/12 / 1107:23: 14:00

Maybe you are looking for

  • How to print multiple copies on a HP Envy 5540

    I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  • A60, USB, network - the Bermuda triangle?

    Hello When using a USB2 external hard drive function (mine is LaCie and I have a lot of friends using different brands), if you have a relatively high network activity, network connections come out. They simply log off for about 10 minutes. What happ

  • Wanting to connect two monitors

    I have an HP 110-090 desktop PC.  I bought an adapter where can I plug 2 monitor cables into the one port at the rear (the blue one).  Both monitors display the screen but when I check the box so that it can extend the desktop and only show the icons

  • fan does not properly

    Does not properly on the laptop

  • Remove a user

    I need to delete a user, I have the password.  How can I do this?