s parts, DVD, cd but DVD drive won't burn does not recognize any cd loaded into it?

Similar Questions

• Satellite M40X-116 - drive does not recognize any CD or DVD

  Hi all!

  I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
  Please I need your help as soon as POSSIBLE.
  If you know what could be the problem, please, just send an e-mail to [email protected]
  Thank you all for the cooperation
  Best regards
  Marian - Romania

  Hello

  to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

  Good bye

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD Drive Power Off and does not restart

  DVD Multi hunt in my ThinkPad W530 assignments after a while to save battery. But when I go into my computer, make a straight on the drive and click to turn on, nothing happens. The Player opens and allows me to put the disc in it, but no program on my computer does not detect the drive. Not Windows Explorer, not any program, not Windows Media Player to DVD burning. When I disconnect, then reconnect, the drive simply disappears from the hard disk.

  So far, the only way that I was able to get the DVD drive working again is by restarting the computer.

  What can I do?

  ThinkPad W530

  NVIDIA Quadro K1000M

  64-bit Windows 8

  Actually the above did not work. I uninstalled Cyberlink PowerDVD and DVD player started working as it was supposed to.

• DVD burner does not recognize blank DVDs, but will recognize blank CD?

  I read through several similar messages, but none seem to have a solution to my problem.  I'm NOT very technically savvy, so this is as much I know:

  I have a Dimension E310

  It was supposed to come with a cd burner and a dvd burner combo.

  The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed

  I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file.  In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.

  As I said, I'm not the person most computer savvy in the world.  I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give.  Thank you in advance.

  
  

• SD R6372 DVD burner does not recognize DVD + R

  Hey people I have a problem with my DVD writer. I bought another laptop producer but there a Toshiba ODD-DVD SD - R6372 an it worked for almost a year. now I know not what has happened, but does not recognize the drive of DVD + r. I tried DVD of 3 different manufactorers, but none worked. can you help me please?

  Thank you

  ANTY

  Hello

  Well, I don't know what can be the problem, but you can try to remove the Mr Device Manager DVD player the dvd player will be recognized again after restarting the device. However, you can check if the laser lens is dirty. If so, I propose to clean.

  Good bye

• I have HP ze2315us, windows XP laptop. Lately, I can't play DVD, CD plays OK. Does not recognize the DVD.

  Some DVDs, like Windows XP, plays OK and any disc or CD plays in the country. But, no DVD set. Does not recognize. Search and search, but no game. Help, please.

  Hi Nuri,

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you are unable to play a DVD. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  We start with a few questions:

  1 have had any changes made on the computer before the show?

  2. the problem occurs for any particular drive?

  First of all, I suggest for the link and try to run the fix it:

  Your CD or DVD drive cannot read or write media

  You may also refer to article and check if the problem persists:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  If the problem is not resolved, please respond with more details and we will be happy to help you.

  Thank you.

• Optiarc DVD + RW AD - 7717H ATA does not recognize discs

  Dell Inspiron N3040 [Amin Note: Service Tag published by policy TOU], o/s Windows 7 SP1.

  I want to assure you that I need to replace the DVD + RW on my Del Inspiron N3040.  I ran the test Hardware diagnosis customize for the CD/DVD device.  It is built in self test (test all the) first hardware test, but the test of trust returns an error message "No. disc or can not read the disc in your drive.  You insert a disc that contains data such as a software installation disc if you want to try again.  You want to try again? "I had inserted the Dell installation disk when I started the test but went ahead and insert another disc to install.  I had the same error 'no disk... ". ».  I ran the test of reading and look for and received the error message "no disk...". ».  The DVD is reported in the BIOS and Windows Explorer.  Windows Explorer displays the DVD in drive D:, but returns the error "insert disk".  Device Manager lists the DVD and properties related material under the general tab, "this device is functioning."  The DVD region is correct, the pilot is reported and the last update is already installed, but the Volumes tab shows "no media".  I deleted the Upperfilter and UpperFilter files in the registry, rebooted and it still does not recognize a disc.

  Is there anything else I should check or do I have to buy a new DVD player?  Please notify.

  Hi sjeffer01,

  I think that you have correctly diagnosed a bad drive. You need to replace it.

  Don't forget that Device Manager checks really just the drivers, not the hardware.

• Vista does not recognize any disk in the disk drive

  Vista crashed when I was loading photos on a cd.  Since then every disc I put in - music, software, data are not recognized, it turns but no program starts automatically.  If I go in via Explore and click the drive the disc turns, then I get the message "Please put in a disc.  Any help gratefully received

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• New hard drive in Windows XP does not recognize

  So I got a Windows XP SP and I want to connect an external hard drive. It does not recognize the hard drive but do not appear in my computer as Samsung (i). This just appeared once. But now, whenever I have connected to the computer again, he appeared as removable disk (e :)) and I can not delete all the files in there.) I tried to use the add hardware, but he found nothing and is not solve this problem.

  And if it serious, my computer is slow. Thanks for any help.

  Hello

  You are welcome!

  Good to know that the problem is solved. Let us know if you need assistance related to Windows and we will be happy to help you.

• I had to replace my hard drive and now windows does not recognize my product code valid what to do?

  I don't know what else to add, it's an HP computer and I've had it for 3 years. the hard drive has become corrupted and I replaced it and now windows 7 Home premium that I bought from best buy does not recognize as valid product code. What now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• DVD drive won't burn DVDs

  I have a laptop DV2000 and although the DVD Player reads and plays CD and DVD it doesn't burn a data DVD.  The properties of the driver are so-called "working properly", but I lost many DVDs trying to burn playlists to itunes.

  It could be as simple a problem that do not use white to DVD quality. Learn more about best drives to http://www.digitalfaq.com/reviews/dvd-media.htm

  I suggest Verbatim or Taiyo Yuden discs only.

• DVD Sony player appears installed but does not recognize any CD or DVD

  I just bought a Sony Optiarc AD7260 DVD RW drive and installed in my system. I am running Win XP Pro sp3. My Bios says the drive is recognized by the latter and in the Device Manager in Windows, the drive shows up and says that "this device works properly." However, any disk I put in the drive (self burned cd / self burned dvd / retail music cd / dvd retail game / virgins DVD) never presents itself as being accessible. When the drawer goes in, I get the icon of the cd spinning for about 15-30 seconds, but then it goes back to the usual pointer. If I try to access the drive in Windows Explorer or any other program, it does not appear. I tried to use ImgBurn to get media info I had placed in the drive (blanks & with data) but it still says "incompatible medium installed" in the drive. The Optiarc is my 4th Sata device, 3 others are hard drives. The system is a dc7100 HP Compaq with 3 GB of ram. Any suggestions?

  Hello.

  Do you have the old disk, or access to another drive, try in the computer?  If these work then you will have a faulty drive.  It is possible to have a defective out of the box.  Also try a different SATA cable.  These can sometimes be problematic.

• Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

  My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
  The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

  He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

  Someone to help they could offer cause I'm running out of space and I really want to delete my files.

  Thank you

  Hello

  It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

  Another clue;
  Have you tried to delete the upper and lower filter registry entries?
  Try it. Sometimes such procedure can simply bring the reader to life.

  The detailed procedure and description has been published here in the article Microsoft Knowledge base:
  http://support.Microsoft.com/kb/314060/en-us/

  Good luck

• DVD burner does not recognize a DVD + RW

  I recently bought a DVD burner, after getting advice from Dell, to replace the original equipped DVD ROM (?) in my Dell Dimension 4500, so that I could record my video movies on DVD discs.

  The DVD burner, I was recommended is the ASUS DRW - 2014L 1 and this was provided by one of the "registered partners" from Dell. Unfortunately, this "Registered Partner" was useless, aggressive & dismissive to all after sales help or advice, where my request on this forum for assistance or advice.

  I had no trouble to record my videos on blank DVDs DVD - RW drives, but when you try to use DVD + RW discs (to use in my Sony Home DVD drive), the drive will not recognize them. Both the + RW & - RW discs are brand new Maxell disks, the RW - 1-2 x speed, single-sided 4.7 GB & the + RW 1-4 x speed, single-sided 4.7 GB.

  When there is no record of any type in the DVD drive, it shows in my computer as: DVD - RAM Drive (D). When a DVD - RW disc is inserted it changes to: CD Drive (D) with an icon of DVD - RW & this is also confirmed when I check on the properties.

  However, when you insert a DVD + RW and the DVD - RAM Drive (D) going to Drive (D) CD, as with the DVD - RW, no icon is displayed to indicate the drive is recognized, or it appears in the properties.

  As far as I can determine from the card, the ASUS DRW - 2014 L 1 is designed for both + & - DVD.

  I'd appreciate any help or advice... or am I just dumb?

  Thank you

  Tony

  Message edited by ozwald on 10/09/2008 02:36