S10 - 3T display problem (solved) rotation and camera

I have replace the first departure of win7 with win7 enterprise. Impossible to install the player from the camera. I tried s10 driver and both drivers for camer s10 - 3T, I also try to unplugged the battary wired and used powder, but these methods don't work, how can I do anything else.

After that I installed the screen rotation, the botton of rotation has failed.

the update of the bios, I have installed is 24cn62ww-win7

the smart driver is 1n1chp19ww5

solved the method:

the camera driver been installed again after installing the driver of the spelling, camera capture software has been installed. the camera can be used.

the same problem is for the rotation of the screen.  After the driver installation, the screen rotation may work.

Although a spelling win7 driver himself, the camera and the screen still needs motherbroad and pilot graphy to connect the device. It logic that if only the device driver has been installed, the device cannot function.

Thanks for the tip

Tags: Lenovo Notebooks

Similar Questions

  • Problems of scanner and camera

    I use Windows 7 and have a HP Officejet 4500 G510n - z in a printer for which I installed and uninstalled, troubleshooted and more troubleshooting, performing all diagnostics etc.  He pretends to yet there is no completed same driver apply a solution for the problem of pilot and completing the installation of a driver for this device.

    It indicates also there is a problem detected with the device PnP (what is?) and the printer - for the two Windows (or HP?) said it is working on it.  Any suggestions?  I'm sick of installing and uninstalling it - the printer works on wireless and works to scan when initiated from the computer, but then only in JPEG.  When you try to scan from the all-in-one unit, which is supposed to make PDF (and did sporadically when 1st bought in September), he claims, there is no device.

    How did you install the printer? from the HP cd, * before * the printer connection, and if you had problems from the start, why did you not communicate with HP support?

  • Display problem on 8310 and 8330

    Hello Experts,

    I have a blackberry app that works very well in all devices except 8310 and 8330.

    My application appears a screen (which has a LabelField and a BasicEditField) when a button is clicked. It works in all devices, but on the other hand, does not show 8310 and 8330 upward the LabelField and BasicEditField, it shows me just a white screen. But when I press 'Enter' on the blank screen, it triggers the LabelField FieldChanged event. How is it possible?

    May be that the two fields are hidden?

    If so, is to show all devices.

    I'm so confused.

    Please advice me on this.

    Thank you!!!

    I solved this problem by simply moving

    this.setFont (defaultFont);

    of the getPreferredWidth method to the constructor of the an EditField subclass.

    But I do not know the reasson for why it happens?

    Thank you for all.

  • Problems with D7100 and Camera Raw

    I can't open the .nef files saved on my HARD drive with the D7100, happens with CS6, 4.4 LR and LR beta 5.  However, if I have the card connected to the PC I can import into both versions of LR and then be able to edit them in CS6 ranging from LR.  I tried to uninstall and reinstall CS6 and LR 4.4, but no difference.  I use Windows 7 Ultimate.  Any suggestions?

    How you import raw images to the computer? Using Adobe Photodownloader or Nikon Transfer? Older versions of Nikon Transfer give problems with new cameras.

    You probably have the latest version of Camera Raw for CS6? It should be version 7.4 to read D7100 files. Check the version of Photoshop (help > about Plug-ins).

    7.4 update, use the Help menu of Adobe Photoshop/Bridge updates option.

  • Problem with Lightroom and Camera Raw

    I can't really make any sense out of Camera raw and other adobe products.

    I have Lightroom 2.4, and if I click on the option 'a way', I said I have camera raw 5.4. However, I have no installed DCP files and therefore no options of calibration of the camera. All I see is "incorporated".

    Are also installed in Photoshop Elements 7 (Camera Raw 4.5.0.175), first Elements 7 & Photoshop CS3 (Camera Raw 4.0).

    I'm not an expert in the present, and I find the instructions on the site of adobe completely confused and hopeless.

    I if advance is no reference to how to get a CR to my Lightroom update. I found 4.6 for CS3 that I understand I SLES later, but I just can't find how to get the camera profiles installed from an update.  If anyone can help.

    Thank you

    Colin

    There is no Camera Raw to Lightroom update!  Lightroom does not use plug in Camera Raw.  All these features are part of the Lightroom program.  The profiles should be installed when you installed Lightroom 2.4.  When you see "Embedded", which indicates that you are working on a JPEG image.  You work on a raw image in order to see other profiles for your camera.

    What device do you have? Some devices did not have a lot of different profiles.  When you open a raw image in Lightroom, you are able to see the different profiles?

  • HP 15 r250tu: Hp 15r250tu display problems

    Hello

    Recently, I bought Hp15 r250tu and since I used it, I was faced with display problems (screen flickers and shows a lot of big white pixels flickering on the screen).

    However, I have been facing this problem for browsing the web and did not face problems when using my laptop to watch full HD videos or play casual games.

    I also downloaded the Intel HD from the Hp website drivers and the problem is still not resolved.

    Please, help me to solve this problem.

    Hi @tushar_soni ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop HP 15-r250tu and get an error on some Web pages or glitter. Remove temp files don't help with sites or problems with the browser.

    Cookies are small text files that Web sites put on your computer to store information about you and your preferences. You can remove these preferences by following this Microsoft document Remove and manage cookies.

    Have you tried another browser?

    Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may require the update which could cause flickering.

    I would like to know how this happens.

    Thank you.

  • Display problems with updates on Windows 7

    I used Windows 7 without problem for 2 years, but since 6 weeks, EACH Windows 7 update caused display problems (halos, horizontal and pink & light green streaks forming). My hardware withdraws like ok, so my only solution was to uninstall updates. I'm an artist, and my computer became unusable as tool-art. I noticed that people who use Windows 10 have the same problem. It's time to (gag) switch to Mac? Does anyone have a solution for this?

    I used Windows 7 without problem for 2 years, but since 6 weeks, EACH Windows 7 update caused display problems (halos, horizontal and pink & light green streaks forming). My hardware withdraws like ok, so my only solution was to uninstall updates. I'm an artist, and my computer became unusable as tool-art. I noticed that people who use Windows 10 have the same problem. It's time to (gag) switch to Mac? Does anyone have a solution for this?

    "We noticed that the issue has not been marked as an answer yet and we were wondering if you solved the problem."

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Yes, reinstalling my favorite of all time, Windows XP SP3 - that support has been extended. After weeks of removal of partitions, re-formatting of C drive, re - install Windows 7 and hacking and tweaking, I gave up. Then, when I started transferring files from 7 and re - install the software, my screen went new loony.

    Uninstalling Adobe Acrobat Reader removed the problem of XP.

    Eventually, I'll buy a laptop to the internet and use XP on this computer for my art and animation programs. Gossip says Internet 7 and 8 are not as secure as XP, so I'm in no hurry to buy. People are the display problems on Windows 10, too. So maybe there is a mole of Apple in the Windows technology crew.

  • I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

    I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

    Hi tonyf,.

    Greetings!

    Each device is compatible with a minimum version of camera raw.

    Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

    Please check if you have this version of the camera installed which include your raw files.

    It would also be that your photoshop will not have to install this version of camera raw as its very old.

    In this case, you can convert your raw files to DNG and can use it.

    To convert the files to DNG, you must download and install the DNG Converter.

    Here is the link:

    Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

    MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

    Concerning

    Jitendra

  • TEXT DISPLAY PROBLEM IN CAMERA RAW

    Hello

    I have a text display problem in Camera Raw. Where there are labels of boxes that need to be checked, for example in the preferences or settings to be pasted to another file, the text is unreadable print. What happens is that he takes to the bottom of half of the top line and half top of the bottom line, rather than by extending the line if the text is only on a single line. It is a problem for me to see all the options. It's the same on all the text of the label within the program.

    I have attached a few screenshots to illustrate the problem.

    Any ideas would be greatly appreciated.

    Thank you very much

    Carl

    The problem is not with the size of the screen, but with the "pixel density" (never forget, that the density of physical pixels of the monitor is indicated). Right-click on the desktop and select Properties (or go to control panel and select display). On the Control Panel, select Advanced; the general Panel contains the DPI setting. I guess that the parameter is now greater than 96 dpi.

    I created a thread on this problem, which must have been at least two years ago. The answer was, as 1. Adobe will solve the problem, 2. It is a problem only with the classic Windows style (under the appearance tab). I have not tested with the XP style, because I prefer the classic style; I'm cursed and live with this shit (my setting is 120dpi).

    BTW, this may be much worse than half-readable labels: buttons, fields, text can disappear completely (you may even not notice, that there should be other buttons and the Panel options)...

    Gabor

  • Camera not properly initialize since v. 4 - PROBLEM SOLVED

    I'll preface this with have not only I've done several ' resets all the ', I deleted all the files from camera loaded on the SD card that have been created in v.3 and after 'Reset All' was performed manually via the menu and re configure all my preferences instead of loading old sound of the SD card.

    With that of the road, my problem is 80% of the time that I start the camera with power supply or a battery, the unit freezes at the Sony logo on the submenu. Power must be cut (which has no effect), power removed/disconnected, wait the Sony logo screen disappears and then try to restart. It usually takes 2-4 trys until the camera manages to move to the "Sony" screen and performs full initialization upward. IM dreading the day that this happens on a job and the camera completely fails to start completely. I NEVER had this problem with all previous firmwares. Anyone else having this problem and any advice on how to solve this problem?...

    Side note: my first F5 made the day I brought home from Abel a year ago, but in this case the start of Sony screen wouldn't go away no matter what I or Able tried to do. They talked to Sony and said send it back, fortunately Abel gave me a new on-site and I never knew the question once again. Until now...

    UPDATE: May 30 - problem solved.

    Well it seems that everything has been healed. I went to Sony to Teaneck service yesterday and they replaced "PCB of HIF - 64" or, as we have been referring to him as the SDI card. Also updated the wheel to stop ND, design much better. Engineers, that I talked to had seen cameras having the same problem as me and reinstallation of the map is the apparent cure. Spoke with a Senior technician there for a good 45 minutes a range of topics. Was'nt able to get new information out of him, but he was very helpful and insightful no less. He said that the Japan is aware of the issue of sensor grid that some people have, but they have not been told that the solution will be even.

    Thank you Alister, I'll give them both a go and communicate the results.

  • Display problems with the Portege R600 and Win 7

    I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

    I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

    It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

    A refresh solves it.

    Anyone have any ideas?

    > I have an external monitor attached and get the same problem with or without him.
    Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
    It would be the worst case, because that would mean that the motherboard needs to be replaced

    But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

  • Problem-solving with HP2311x and ProBook6455b

    Hello

    I have a problem-solving with portable HP2311x and ProBook6455b.

    Maximum resolution is 1600 X 1200

    Current display driver is ATI Mobility Radeon HD 4200

    However, my HP monitor supports the 1920 X 1080.

    I used only the external monitor without using the laptop monitor and the maximum resolution is always to 1600 x 1200.

    I also downloaded the drivers recommended by HP, but it does not solve the issue.

    I also tried with the drivers provided by AMD, but I get still more low resolution (1280 x 768) because the driver software detects is ATI Mobility Radeon HD 4250

    When I try to use the AMD Vision Engine Control Center stops unexpectedly

    I have conteacted
    Portrait Displays, Inc..
    http://support.portrait.com

    But they suggested me to contact HP because they were not able to solve my problem.

    Any help will be appreciated.

    Kind regards.

    I understand that you are not able to use the full resolution of the monitor even when the screen of the laptop is out of the question.

    Ensure that the system has the right driver for the monitor found here.

    You can try the support business forums as it appears that the two components are business models.

  • All of a sudden my monitor went black and came vertical back instead of horizonal. Driver problem?

    When installing a virus checker my mototor suddenly went black and came back with everything in a vertical rather than horizontal. My thought is that I

    now have a driver problem. What are the proposals?  Pete

    Hold down the Ctrl and Alt keys at the same time and use the arrows to rotate back.

  • Problem between C40 and Panasonic AW-HE50HE camera

    Hi all

    We have identified a problem between C40 and Panasonic AW-HE50HE camera with HDMI connection.

    The Panasonic camera is configured with the 720 p output, and it can display on a LCD monitor.

    However, we have connected the camera C40 and Panasonic AW-HE50HE with HDMI connection, the C40 show black screen.

    The codec C40 is confirmed as well function and its specification declared support,

    1280 x [email protected]/ * /, 59,94 Hz (720 p 60)

    1280 x [email protected]/ * / Hz (720p50)

    Anyone can provide help for me, thank you,

    Ben Lai

    Hello

    Can you telnet to the codec with the camera connected and check if the codec no video camera and what is the detected resolution.

    Teck Chye

  • [Problem solved] On the display screen does not not on T60

    I have replace my xp with Vista Business.

    All the drivers are installed. But on the screen display is not working properly. Display nothing when I press the volume high/low/mute key. However, other buttons like Fn + F5, Fn + F3 appear on the screen.

    Someone knows how to fix this?

    Thank you very much.

    problem solved.

    Looks like I need to install a Lenovo System Interface driver. It's just for users of an ATI graphics card and nVidia users don't need.

    Thank you very much.

Maybe you are looking for

  • How to install word trademark

    Hello I would use the word/trademark as SHARP or any other brand name on the Pages of Macbook. I have all the Microsoft Windows in my Macbook. How do I install the font? or maybe the shortcut to do it's hard to believe the word/mark registered. Thank

  • Update iOS 9.2.1 keeps disconnecting wifi

    Since that I upgraded my iPhone iOS 9.2.1 as my wifi guard disconnection during the use of the Internet. I tried to restart my phone but without success, not even when disconnecting wifi and turning back on. To THE point that I had to go back to the

  • LabVIEW for DG5101 driver

    Hello I have a model of generator Rigol DG5101 function and can not find the driver for labview. I found the driver for the 1 k and 4 k. In the link: http://beyondmeasure.rigoltech.com/acton/attachment/1579/f-01be/1/-/-/-/-/file.vi There is an exampl

  • Issue of license upgrade: Windows XP Home - > Win7 Pro?

    Microsoft licenses allow an install WinXP Home to upgrade to Win7 Pro through the 'Upgrade' of Win7 Pro edition? Thank you

  • Question about encryption for a VPN established between two of our sites

    We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men. For an upcoming exam, the firm wanted to know what kind of secur