S20 - 12.0 (7.99 GB usable) GB installed memory

Similar Questions

• Satellite P200 - Win 7 x 64 install memory 4 GB (3 GB usable)

  Hello

  I update my Satellite P200 (PSPBGA-01W015) for Windows 7 x 64 but I had problem with memory, Windows said: installed memory 4 GB (3 GB usable).

  In the resource material say monitor reserved 1026MB

  When I check the properties of the graphics card, it is said: NVIDIA GeForce Go 7600 with dedicated 256MB of system memory 1279 MB memory shared, 1535 MB total graphics memory.

  I guess that the graphics card occupies only 1 GB of memory but it not there no option anywhere that I can adjust this shared memory (both in the configuration of the Bios and Windows).

  The only version of Bios I can find on the site of Toshiba Australia support for my model is "BIOS Version/Date TOSHIBA V1.70, 21/08/2007' which is in fact only supported Windows Vista.

  Not sure if I can find the similar to the Web from Toshiba Europe site Bios version? The last time when I upgraded my computer to Windows 7, support staff advised me to site of Europe as well, but the model similar to the differently named Euro market. Now I don't remember that match model Europe with my laptop model Australia.

  It seems the support Toshiba Australia not always been well updated Web site. :(

  Thanks a lot if someone have a solution for this. Would be appreciated.

  See you soon
  Anthony

  > I guess that the graphics card occupies only 1 GB of memory but it not there no option anywhere that I can adjust this shared memory (both in the configuration of the Bios and Windows).

  You are right. The part of the main memory is used by the graphics card, but you can not affect the part of the memory that this is manually controlled by the graphics driver.
  If the application being game needs a more graphics memory, the driver assigns this.

• Usable memory (RAM) less than the installed memory, showing remove Win7 dual-boot.

  Original title: "Memory (RAM): 12,00 GB (3.62 GB usable)", how can I resolve this issue and remove a dual boot Win7?

  I recently, after experincing problems (see below the Intel SSD), noticed the system said that there is only a 3.62 GB of Ram available in my computer.  I have this statement ' Installed Memory (RAM): 12,00 GB (3.62 GB usable) "the computer has always used a higher around 10-11 GB amount.

  I noticed that the Windows performance index was 5.6, after adding an Intell 240 GB SSD, it jumped to 7.6; However, now with the problems is 5.4, caused by the RAM.

  I ran the full memory diagnostics: start-up and verification of memory it says I have 12 GB of RAM can be used across both.  I asked with Asrock if my RAM and CPU compatible before buying it, and they said it was a wise decision for 970 Extreme4 motherboard.  I subsequently has inquired about the Kingston RAM and included information from a - Data, and they said they used Kingston ringout for approval process as with a - DATA, including the compatibility of the different types of RAM used together.  The RAM was tested and is placed on the store of the computer.
  This problem did not exist until I installed the Intel SSD.

  I don't have a problem with dual boot on my computer after installing a new 7 ultimate on the SSD, and when it worked normally, I atttached the old hd back into your computer, because important data it contains.  This caused a situation of dual-boot.  I did some research and jumped the drive as a slave thinks that it would not cause a problem.  How can I remove Windows 7 from the old hd and then remove the window dual-boot.  I tried the old way to change the startup configuration, however, I can't find it in 7 Ultimate SP1. I also sent the old HD and the start window remained, as the index and the usable Ram 3.62.

  My Questions as already said:
  How can I return to a usable 12 GB of RAM and return the highest Index of Exp Win?
  How the dual boot can be edited to boot from my SSD without window startup and remove window 7 my old HD eventually without formatting?

  The system configuration:
  Processor: AMD FX FD8300WMW8KHK 95W Vichera 3300 MHz

  Memory: ADATA DDR3 1333 AM2U139C4P2 - s 4 GB x 2
  Kingston DDR3 1333 KVR1333D3N9 / 2g x 2

  Graphics card: MSI GeForce GTX 750Ti Gaming

  Motherboard: ASRock 970 Extreme4

  Power: 600 W power supply

  HD: IntelSolid State Drive 240 GB 335 Series

  OS: Windows 7 Ultimate 64 bit SP1.

  The version of the BIOS/Date: 32 MB FRIEND UEFI BIOS legal with GUI support version 2.60

  NISH

  When you are satisfied with your problem is solved, please mark the answer. It helps others see what answered your question.

  If you posted the original question, you can mark the question as yourself have. Just click the mark as answerbutton.
  Source: http://answers.microsoft.com/en-us/page/faq#faqAskQuestion8

  You should see the response from Mark (and have found this useful Me) buttons on all messages, except your own messages, sent by others about your. They are there to allow you to tell other users, messages that you have found useful, and ultimately what solved your problem or answered your question.

• ' Installed memory (RAM): 8.00 GB (3.12 GB usable) ", what does that mean?

  Recently, I added 4 GB memory to my existing 4 GB, for a total of 8 GB of RAM.

  After installation, I checked system properties to find this info.  ' Installed memory (RAM): 8,00 go-go (3.12 useable).
  In addition, 'Windows Experience Index' before when I had a single 4 GB stick was 7.4, now after adding another stick of 4 GB, it came down to 5.9.
  Does this mean the extra 4 GB of RAM, I added is not used and is only slow down my computer?
  If yes how to do all 8 GB of usable RAM and have a higher Index Win Exp?
  The system configuration:

  Processor: AMD Phenom 2 X 4 955, 3.2 Ghz

  Memory: Corsair DDR3 (CMV4GX3M1A1333C9) 4 GB * 2

  Graphics card: Nvidia GeForce 210, 1 GB

  Motherboard: ASUS M4A78LT-M THE

  Power: iBall 350 W power supply

  OS: Windows 7 Ultimate 64-bit.

  The version of the BIOS/Date: American Megatrends Inc. 0801, 17/01/2011

  Assuming that it is memory under-score, it probably means that the memory is not fully compatible

  http://www.Corsair.com/learn_n_explore/ is a website that ensures that you get compatible memory

• Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB

  Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB
  Windows Pro 64-bit
  8 GB RAM
  1 TB harddrive
  ASUS P7H55D - M EVO motherboard
  New Windows installation has the same problem.

  Control Panel > system does not show the usable memory, only the memory installed

  The Task Manager > Performance demonstrates both installed, available and free

• Why my installed memory (RAM) displays 5,00 GB (1.99 GB usable) when I have the 8 GB? (using the 64 bit OS)

  I recently installed 2x2gb and 1x4Go of ddr3 ram, but when I go to 'System' it shows 5 GB (1.99 GB used) I am running 64-bit operating system and processor intel core i7 and I have no idea why this shows usable only 1.99 GB and 5 GB installed when im running a total of 8 GB

  In this configuration, you use a 1st question iSeries processor triple channel Intel 1366?

  The system will be the clock all the memory the same for the 1600 will be pointing down.

  Reported memory does not match the possibility that a DIMM has been missed. The only possibility is that they both bowed (double-sided) and only one bank has been detected.

  Check the manual of the motherboard, but you will have to run in Dual channel mode and use 2 and 4 for the 2 GB and 1 for the 4 GB.

• ASA5585-S20-K9 from 8.2 to 8.4 upgrade memory required?

  Have an ASA5585-S20-K9 and I need to get from 8.2 to 8.4.  Currently has 4 GB of memory, but it needs to be improved to a minimum of 8GB.   I searched high and low for a kit to upgrade for the 5585 but do not come with anything.  Found for the 5540 and below, but there must be something special about the 5585 s I can't find anything.

  If anyone has an idea on what I need to get to level set memory, it would be appreciated.

  Chris

  Hello Chris,

  According to usually at the documentation below, we can see that ASA 5585 comes with 12 GB of memory. Please see the 5585-s20 ASA data sheet below.

  http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-serie...

  Firstly, please note if you are running 8.2.x code on your ASA5585-s20. It seems that ASA 5585 SSP-20 will watch 4 GB of RAM which is expected for the 8.2 software with no support for 64-bit (so it cannot process more than 4 GB of RAM in the application of the ASA). If you switch to 8.4 example software, which supports 64-bit, all of the 12 GB of RAM will be used.

  Release notes for 8.4;

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/release/notes/as...

  The memory required for the upgrade:

  http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-serie...

  Also on the way to upgrade from 8.2 to 8.4.

  Things to remember: -.

  Upgrade from 8.2 to 8.4 ASA, is NOT a minor update. There are a few things that are need to keep in mind:
  1. NAT statements are completely different.
  2. the IP addresses used in ACL are real IP (not translated)
  3. it is recommended that you take the time to stop for this upgrade.

  Things to do before the update: -.
  > Disable NAT control over the two ASA.
  > Check the memory required for the upgrade.
  > Take configure Backup.
  > Follow the upgrade path as mentioned below.

  Things to do after the update: -.
  > after reclassification of 8.2.x to 8.4.7, you must check the start config error.
  > present the startup-config errors, it will show that NAT and ACLs statement has not been
  migrated, so we can manually configure these instruction.
  > arp permit-nonconnected.
  > Of 8.4.7 9.1.4 or 9.1.5, you can migrate directly.

  Hope this information helps you.

  Kind regards

  JAI Ganesh K

• installed memory of Windows 7 Professional 32 bit - 4 GB ((Mo 935 usable)

  I have problem with my hp pavilion g6 series.

  I installed windows 7 Professional 32 bit, 4 GB memory, but usable only 935,
  Core i5 with chipset intel. should I update bios for this.
  can someone give good solution.
  Thank you
  Sikandar

  Hi Sikandar,

  Let us work together to solve this problem.

  This is expected behavior on computers that are running Windows 7. The reduction in available system memory depends on the configuration of the following:

  ·        The devices that are installed in the computer and the memory reserved by these devices

  ·        The ability of the motherboard to manage memory

  ·        The version of the BIOS system and settings

  ·        The version of Windows 7 that is installed (for example, Windows 7 Starter Edition does support 2 GB of memory installed.)

  ·        Other system settings

  I ask you to follow the steps and the instructions in the following article:

  Usable memory may be less than the memory installed on Windows 7 computers
  http://support.Microsoft.com/kb/978610?WA=wsignin1.0

  Warning: the third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Hope this information is useful. Please get back to us with the State of the question.

• Windows detects the installed memory (RAM) 32.0 GB. Then there (16.0 GB usable)

  Windows detects the memory (RAM) installed 32.0 GB. Then there (16.0 GB usable). OS is windows 7 64 bit. Why are there only 16.0 GB usable? and how to fix this? Thank you

  For 64 bit versions of Windows 7, Home Premium can use a maximum of 16 GB, Professional and Ultimate can use up to 192 GB.

  If you want to use all 32GB, upgrade to 64-bit professional or ultimate edition.

• 2.4 Gb RAM is usable out of the 6 GB installed memory

  I recently move my memory (RAM) 2 GB, 6 GB by adding 4 GB one. When I go on the computer properties, I found that just 2.46 GB is used. How can I make use of the entire 6 GB RAM? IM using Lenovo W500 running Windows 7 32 bit Ultimate edition.

  THX

  Cath

  Adding RAM is not just a question of 32-bit or 64-bit. There are two other factors to consider. You can meet the limitations imposed by the motherboard. The limit for your computer is 8 MB, even for a 64-bit operating system. You should also check that the version of Windows is not limited. -see the table in the following link:
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366778 (v = vs. 85) .aspx #physical_memory_limits_windows_7

• Installed memory (RAM): 6,00 (3.99 GB usable) GB 'can anyone help.

  Here are the specs of my computer.

  7200 RPM disk space

  COOLER MASTER V8 RR

  COOLER MASTER HAF 932

  EVGA E758-TR 3 - Way SLI

  896-P3-1255-AR EVGA GeForce GTX 260 Core 216 896 MB 448 - bit GDDR3 PCI Express 2.0 x 16 HDCP

  CORSAIR CMPSU-750TX 750W

  Intel Core i7 - 920 Bloomfield 2.66 GHz LGA 1366

  G.SKILL 6 GB (3 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800)

  (64-bit), Windows 7 Home Premium

  There are other parties, such as the DVD burner, but I don't think that important.

  What should I do? I don't want to mess with the BIOS without knowing what to do.

  So your update of the BIOS allowed to use all installed RAM except 9 MB allocated to the material. Which for me is a good result.

• Configuration of memory S20

  Is it ok if we mix the modules of 1 GB and 2 GB?

  Causes performance problems?

  I have four modules of 2 GB and a 1 GB modules. I have only 2 GB modules installed on my system. Now, I think installing the module of 1 GB more.

  Thank you.

  Yes, this combination will work according to the guide to spare for the S20 material...

  When you install memory modules, use the following instructions:

  • Use of 1.8 V, 240-pin DDR3 ECC UDIMM.
  
  
  • Use 1 GB, 2 GB or 4 GB memory modules in any combination up to a maximum of 24 GB.
  
  
  • First, install the modules of memory in the memory locations of blue color.

  as long as you follow these rules, you will be ok.

• Firefox 18.0 black screen only on secondary screen / black box around the mouse, Windows XP, all updates

  Display after the automatic update of firefox firefox 18.0 normal if has a totally black screen (inside the border) if the window is secondary - window on the main screen. The mouse pointer (arrow) also has a box around it when firefox on the secondary screen. The display is normal if the frame partially covers the main screen.
  Environment: Lenovo 9088CTO Office 3072 usable MB installed memory
  Windows XP PRO all updates.
  ATI Radeon HD 2600 XT [graphics card]
  IBM L200P [Monitor] (20.2 "screws, s/n 66-C5539, October 2003)
  IBM L200P [Monitor] (20.2 "screws, s/n 66-G8505, April 2004)

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• HP 550: updated hp 550 memory and cpu with the unconventional settings. is not ideal, but not other choice

  HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fried somehow. I don't know what happened though I wouldn't put past my inattention of roommates.
  I'm desperate. I have to finish my current job until I'm able to afford to buy a replacement. So I have to rely on stop-gap measures, in desperation to finish my project, that are less than ideal, but so far are doing better than I'd hoped.
  Im a photographer, Capture One, Adobe Photoshop Lightroom, Adobe Photoshop and Premiere Pro are the go for workaholic applications that I need to work. without them I have no income. in order to have this machine run these applications,
  the machine I have left is an old hp 550 that was gathering dust in the closet. It was built for 32 bit Win XP and in no case is designed to run adobe products food pork I use, particularly of Lightroom.
  Unfortunately PS with Lightroom and first are 64-bit programs and LR and first are hyper threaded. so I did some research and with the help of the list of the utility windows 7 Advisor to upgrade instructions, I was able to get windows 7 Pro 64-bit to install and run.

  I know that this is not the ideal machine or the situation, but for a few weeks, I need to make it work.

  I really just 2 simple questions. First of all, I went to the HP technical support. but they were not useful. as the guarantee of the laptop are long gone, they would be not even polite and basically told me to shove off. Then on another forum, I called back and comes with a knowledge it all who constantly insisted on the fact that there was no way no how this pc could run 64 bit win 7, which i thought what am I seeing things? It works very well for 3 months. So I decided to come to you. your forums were useful on many occasions.

  Basically, I need this machine to run these programs during the next month or two, until I can buy a new machine.

  essentially, what I want to know, it's the motherboard support an upgrade of the processor? and if anything goes, what do you suggest as a substitute, given my needs? The Core 2 duo is the bare minimum of what I can limp with like photo/video rendering times are excessively slow.

  then I was talking to the support staff essential tech upgraded memory. and possibly set the bios to force to run 8 gigs of ram. They said that they have cold cannot find any version of bios that would make that possible, but only by forcing already run 64 bit, which has already allowed the pc to use the full 4 GB of ram, which was impossible in the 32-bit format. He suggested that I buy 2 4 gig modules such as 4 GB DDR2 PC2-5300 unbuffered NON - ECC, 1.8V 512Meg x 64 which can be seen at http://www.crucial.com/usa/en/memory/ct51264ac667 and try to install the full 8 concerts and see what would happen, saying that he had a feeling that I might get lucky. his logic is that the 64-bit system already open the ram limits and who knows, you can't make an omelet without cracking of eggshells! It seemed very optimistic. So, what do you think? It seems likely you because I love to work. or do you think the guy was a quack? and this whole endeaver is a waste of time and money?

  also, any other suggestions on how to time this month long storm that do not involve suggestions of buying new machines would be appreciated!

  so that you have accurate details below are my system specs.

  Hewlett-Packard HP 550 F05
  System serial number: CNU90716GN
  Inventory number: CNU90716GN
  Chassis serial number: CNU90716GN
  Case type: portable

  Windows 7 Professional (x 64) Service Pack 1 (build 7601)
  Install language: English (United States)
  Local system: English (United States)
  Installed: 04/08/2014-18:21:11
  Start mode: BIOS (Secure Boot not supported)

  Processor and b main circuit
  1.80 GHz Intel Core2 Duo processor
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached
  64-bit ready
  Multi-core (2 total)
  Not hyper-threaded Board: Hewlett - Packard 3618 KBC Version xx.xx
  The bus clock: 200 MHz
  BIOS: Hewlett-Packard 68MVU worm. F05 19/01/2009

  Readers of memory Modules c and d
  2320.47 GB drive hard usable capacity
  959.16 gigabytes of free disk space

  HL-DT-ST DVDRAM GSA - T50L ATA Device [scanner]

  Hitachi HTS543216L9A300 [hard drive] (160,04 GB) - drive 0, s/n 090108FB0200VCCPYM3B, rev FB2OC40F, SMART location: healthy
  ST1000LM 024 HN-M101MBB USB Device [hard drive] (1000,20 GB) - drive 3
  ST310005 USB Device [hard drive] 28as - 1 player
  WD 1600JS external USB Device [hard drive] (160,04 GB) - disc 2, s/n WD - WCANM2342148 4088 usable MB installed memory

  Slot ' DIMM #1' has 2048 MB (serial number 0000202 A).
  Slot ' DIMM #2' has 2048 MB (serial number 00004042).

  Thank you friends! I can't wait to read your tips!

  Jodie

  Here is the Manual:

  Repair manuals

  Unfortunately, the maximum configuration is a processor T5670 1.8 ghz and 4 GB of DDR2-667 memory, you already have. The CPU includes the 64-bit instructions is not surprising, that it can run Windows 7 64-bit. My best advice is to save your money for when you can get a real working machine. The only other likely to help is a solid state drive, you might use in the laptop and then also use the new computer that you intend to buy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• slow facebook games

  This who can I update/download to make facebook games not interrupt or run slow? I have only had my computer for 2 years and used very little with almost no download or software installs. I recently installed google chrome and it's my default browser (I think). I apologize, but I am completely illiterate in computer language so I don't know what other details even give so here is what is displayed in my control panel. (and please don't laugh because I do not know this is completely useless.) It's a p2-1033w HP. AMD processor E-300 APU with graphics HD Radeon (TM) card. 1.30 GHz. 3,00 (2.60 usable) GB installed memory. It has a 64-bit operating system. I have Windows 7 with service pack 1. Help, please!

  Hello

  1. What Facebook of the game which is slow?
  2. Are you having the same problem on Internet Explorer?
  3. Offline games are too slow?
  4. The overall performance of the computer is slow?
  If the problem occurs only on Google Chrome then I suggest that contact you Google chrome support for assistance
  http://support.Google.com/chrome/?hl=en
   
  If you encounter the same problem on Internet Explorer, and then try the steps in the following article:

  http://support.Microsoft.com/kb/2528246