S2031: compatibility issues with windows 10

I have an old Hp S2031 monitor of 3 years. I got a free upgrade to window 10. I received the following question from Microsoft:

NVIDIA GeForce 6150Se Nforce 430

Production of the display is not your screen compatible with Windows 10. Check with your support manufacturing.

Is there a solution?

The phase indicated in the post "NVIDIA GeForce 6150Se Nforce 430" comes from the graphic chipset motherboard.  If you have a separate graphics card solution, then it might still be OK.  This chipset is quite old by computer standards, so it should not be supported in Windows 10.  I would like to wait a few months, a workaround might appear to increase the demand for this chipset for Windows 10 support.

Tags: HP Desktops

Similar Questions

  • I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

    Right-click on the setup.exe > run as admin.

    See you soon. Mick Murphy - Microsoft partner

  • Anyone know of any compatibility issues with Windows 8 and RV series routers?

    I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

    On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

    I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

    If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

    The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

    Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

    Hi Gregg,

    NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

    If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

    This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

    -Tom
    Please mark replied messages useful

  • English CC only version: compatibility issues with Windows 7 in Italian?

    Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

    Francesco

    Resolved:

    I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

    Thank you, bye

  • Compatibility issues with windows 7 and maplestory

    I have windows 7 32 bit, I downloaded maplestory and when I clicked it, he jumped to the top with a box that says it has compatibility problems.  I tried to go to the properties of switching it forms XP SP3 and windows vista and rebooted but none of this seems to work.  I also went to troubleshoot compatibility and put it in my specefic problems, but it comes back with an error in Japanese.

    Help?

    Hello

    MapleStory has no information on the Windows 7 Compatibility Web site. The origin of the game specifications are for Windows 98 - XP.
    It is possible that they did not have it compatible with Windows 7 yet.

    You can check with the support of Maplestory for all hotfixes that may be needed to play the game on Windows 7.

    http://MapleStory.NEXON.NET/support/downloads.aspx

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Compatibility issues with Windows Vista Business

    Could not install Oracle 10 g/Microsoft SQL Server 2005 on this 32-bit machine. Windows Vista Business.It is machine Lenovo Thinkpad with 3 GB of RAM. Installation ends abnormally. Can install Oracle/SQL Server 2005 on Windows Vista or should I change to Windows Xp professional? Are there problems of compatibility with Windows Vista Business? How should I upgrade so that I can install Oracle/SQL Server etc for my development/practice work?

    Context/Back ground - as a developer I want to make some practices in Oracle 10g, MS SQL Server on this computer. I have the licensed version of Windows Vista on this Lenovo Machine. Please tell me how I can upgrade to Oracle, SQL Server etc can be installed on this machine.

    Thanks for your suggestion.

    Pratim Chanda Pankaj

    India

    Hello

    The question you posted is more suitable in the TechNet Forums. Please post your questions in the Microsoft TechNet forums to improve the assistance.

    Here is the link: http://social.technet.microsoft.com/forums/en-US/category/windowsvistaitpro/

  • HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

    My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

    HI JourneysLady,

    I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

    --------------------------------------------------------------------------------------------------------------------------

    Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

    ----------------------------------------------------------------------------------------------------------------------------------------------------------

    Although I am an employee of HP, I speak for me.

    ---------------------------------------------------------------------------------------------------------------------------

  • Firefox 19.0.2 is having some compatibility issues with Windows 7

    When you start Firefox version 19.0.2 on Windows 7, the browser will crash immediately and gives me the crash for her window. Tried to restart the browser for several times and it still crashed on me, after that or I'm going to have to start using safe mode or run the browser by using the compatibility mode set to Windows XP (ongoing enforcement of the compatibility mode until the version of Vista works perfectly)

    Hi, try updating your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General while you are in safe mode.

  • IntelliType and Intellipoint compatibility issue with Windows 7

    I have an older version of Intellitype and Intellipoint (5.3).  When I try to install using Windows 7, I get a message that it is not compatible.  Have I not all options available to me to update so that I can continue to use these devices?

    Thank you!  Here is the address for the choice of products by download.

    http://www.Microsoft.com/hardware/en-us/downloads

    Since were neither Intellitype and IntelliPoint, I selected IntelliMouse, and Wireless Comfort Keyboard.  After you have selected by selecting the operating system and the download, everything seems to work well.  Thank you!

  • compatibility issues with windows 7 and card adapter and video screen in a computer laptop compaq nx7040

    After I installed Windows 7, 32-bit in my computer compaq laptop nx7040, there were two messages stating I have video card and display adapter problems. The pilots could be exceeded, but I can't find an updated driver. Can anyone help? Thank you.

    Hello

    This is an old machine (I know because I had one). It was a very good machine, but it upgraded to Windows 7 is a bit too far I think.

    Kind regards.

  • How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    How can I get my ps 3.0 to install on my laptop? compatibility issues with the new version of windows

    It is hopelessly outdated. It is simply not compatible.

    Mylenium

  • Compatibility issue with IE 9

    I get the following error message after installing ie 9 and try to run VMware Service manager 8

    "Session error".
    Your session has expired or has been terminated by another officer sign in with your ID and password.

    Please sign in using your infraEnterprise URL. »

    is attached the screenshot of the error message

    However, VMware Service manager 8 opens and works with ie 8, then is there a compatibility issue with ie 9 or is there something that needs to be changed in order to make it work with ie 9?

    Note: I am running with the patch 43

    Like I said not released PR mentions IE 9 Support (including RP48, Gytis thanks for the ReadMe file).

    I triedRP48 with the versions of IE 9 (32 and 64-bit) on a 64-bit Windows 7 workstation but get the same errors:

    Session error
    Your session has expired or has been terminated by another officer sign in with your ID and password.

    Please login using your URL infraEnterprise

  • Compatibility issues with CS2 and Windows 2000 XP? This is supposed to be THE OS ON CS2 FONCTIONNE_ it? Can anyone help - I really need my CS2 back! Thank you.

    Help! Years - SEVEN to be exact - I BOUGHT Adobe CS2 and widely used. Then, I was in an accident that took five years to recover from. After my recovery, I tried to return to the use of my Adobe products to see that Adobe is discouraging use of CS2 and because I HAVE a LICENSE and that was the LAST version, I used I wanted to start with a version that I know. Several months later, apparently I wasn't the only one who wanted to CONTINUE to USE CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT because of operating system compatibility issues, Adobe continues to discourage the download and use. HERE's THE THING: I have the SAME SYSTEM running the SAME operating system as when I BOUGHT it first. I downloaded the SAME EXACT VERSION of CS2. He moved very well. But I can't OPEN the app and the Troubleshoot utility of the reports that there is "COMPATIBILITY ISSUES". WHY?!?!?!?!?

    I'm on a PC running Windows 2000, XP. I OWN a LICENSE for Adobe CS2 and it allows to launch on this same machine. I had to reformat my system two years ago, so it has much more space, but when I try to OPEN the application, it won't work. When I run the troubleshooter in Windows it indicates system compatibility problems? Can someone tell me what to try now? Thank you.

    Did you download and install the special version of CS2?  It's the only one, you will be able to use.

    Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  • Compatibility issue with the version of media center 2004 and Windows XP Service Pack 3!

    I have a problem getting Media Center 2004 version compatibility to work with Windows XP, Service Pack 3. Does anyone know of a problem here? Are they compatible? If not, anyone know if there is a fix for this?

    The material that I was referring to is the material that you were talking about, namely your card graphic and sound card. I thought that this could be as simple as installing the correct hardware drivers.

    As I am not very familiar with your particular PC, it is not that I do. You can switch to the thread where PA bear you helped:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/why-cant-i-download-and-install-Windows-XP-SP3/64b9bffb-7048-4970-82b7-5746e32042dc

    or go to this page:

    http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&product=top

    Or you might be able to find more relevant help at this forum:

    http://h30434.www3.HP.com/

    Good luck.

  • Compatibility issue with DVD Maker and Windows Media Player

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I'm no expert in this area, but I think that you used the wrong application, namely Windows Media Player.
    A month ago, I did 2 DVD with images and music. Here's what I did...
    Open Windows Movie Maker...
    1. I imported images in the timeline.
    2. I imported the music (wma in your case) file to Audio column / music.
    3. I have synced it so that the images and the music would start and end at the same time.
    Note : If you already have the video file with import loan, then simple music video to the timeline and go to step #4.
    4. I clicked on publish on DVD.
    Windows DVD Maker wil pop up. You know the rest of the steps.

    t-4-2

Maybe you are looking for