S2S VPN with multiple context

Hello

I intend to combine two ASA 5510 (used for the separate VPN S2S requirements) in a single Cisco ASA 5512 - X using contexts. I would like to know if someone has deployed VPN S2S in multi mode context, known problems and how the distribution of resources is made (for example)?

Thanks in advance

Krishna

Hello Krishna,

Implementation of VPN in multiple mode requires the division of total available VPN licenses between the configured settings. ASA administrator can configure how many licenses each context is allocated.

By default, no license of VPN tunnel is attributed to the contexts and the award of the license type must be done manually by the administrator.

Here is a document for your reference:-
http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/116639-TechNote-ASA-00.html

Concerning
Dinesh Moudgil

PS Please rate helpful messages.

Tags: Cisco Security

Similar Questions

  • ASA - s2s vpn with dynamic ip - Dungeon tunnel upward

    Hi guys,.

    We want to set up a vpn between our central asa5520, and a new branch office asa5505 with dynamic public ip address.

    This type of configuration is supported, but the tunnel can only be initiated from the asa distance (the asa central do not know how to reach the asa remote).

    prove that on this vpn also transit traffic voice, we must always maintain the tunnel.

    A solution would be to have a kind of continuous ping from the remote office to the central office... is more 'professional' wat to reach our goal?

    Thank you.

    Try, 'management-access to the inside' of the asa and ping

  • How to bind a VPN (TX via VPN) with a sat (RX via DVB - S2) / Windows Vista Home Edition / Multiple dial conections

    I use a Windows Vista Home Edition on a laptop. The system connects to the Internet through a cellular router EDGE (via Ethernet) and receives the data by linking receiver DVB - S2 satellite broadband connected via a USB interface. The connection is through a VPN. Windows Vista loses the symbol of the "blue planet", as soon as the VPN connects. Authentication and connectivity is OK. DNS also works OK by the way VPN, with pointing to the VPN IP address 0.0.0.0.  The diagnosis indicates an error where Vista says that she finds multiple active dial connections. Y at - it a configuration option that allows me to bind the interface transmission (VPN) with return channel satellite?  The same software and configuration under Windows XP SP3 works OK.

    Thanks in advance for your advice.

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

    You can also check the links below for assistance.

    http://TechNet.Microsoft.com/en-us/library/cc728078 (WS.10) .aspx

    http://TechNet.Microsoft.com/en-us/library/cc737767 (WS.10) .aspx

    Hope that helps.

  • IPSec VPN in the context of security... Static interface or not?

    Hello

    For the moment, I have a pair of ASA5510 in context configured Multiple. Everything is ok, but we use til now only the ACL functions.

    Now, I would be interested in configuration 2 contexts, with IPSec VPN. A VPN by context. But I can't find any information if it would be possible to use a common interface for both contexts. My wish would be only to spare public IPs...

    If I have to configure VPN 100 100 contexts, I need 100 public IPs?

    Thanks to anyone who can give me a tip,

    Kind regards

    Olivier

    Hello

    If you have separate IP addresses on the same subnet, you can reach these interfaces to different contexts

    You only configure a sub with a interface ID Vlan that is connected to the gateway of the ISP. You can join this subinterface settings as much as you want but the IP address on the interface must naturally be different in each context. To my knowledge ASA really prevent you from setting up the IP address if she sees him in a different context in the same subinterface.

    -Jouni

  • question links to site 2 site VPN with authentication cert

    Currently we are accumulate tunnel site-2-site VPN with our client. Usually we use pre-shared key as authentication with other customers without any problems, but it must use authentication cert with her this time. But the question is that our CA is different from theirs. I tried a few times, but he failed. Is it someone please let me know that he must have the certificate issued by the same certification authority to create the VPN tunnel?

    Thank you very much!

    Hello

    You can read this document to get a simple example of setting up a VPN S2S using certificates on an ASA:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080aa5be1.shtml

    Basically the sides must have the same certification authority and If there is an intermediate certificate that must be installed also. The ASA 2 will generate a CSR (certificate access code request), now then PKI will create a certificate for both parties, commonly called "certificate of identity".

    Please pass a note and mark as he corrected the post helpful!

    David Castro,

    Kind regards

  • ASA 5510: beat s2s VPN

    Hi all

    I have a VPN of n-star with 5510 boxes in several places.

    Users complaining that s2s links are beat from time to time for both places.

    Here's the log output for the moments where the links are torn down:

    First spoke:

    07/07/2010-20:17:09 Local4.Notice % 713259-5-ASA: group = , IP = , Session is to be demolished. Reason: The user has requested
    07/07/2010-20:17:09 Local4.Notice % 5-ASA-713050: group = , IP = , missed connection for peer Reason: terminate Peer  Remote proxy 10.3.0.0 Proxy Local 172.16.100.0

    Second spoke:

    07/07/2010-18:34:45 Local4.Notice % 713259-5-ASA: group = , IP = , Session is to be demolished. Reason: Idle Timeout

    07/07/2010-18:34:45 Local4.Notice % 5-ASA-713050: group = , IP = , missed connection for peer Reason: IPSec SA time-out  Remote proxy 10.5.0.0, Proxy Local 172.16.100.0

    I think the bold text is the reason. But I don't know why a connection stop remote site1 and why to site2 is timeouts.

    I have HIS lifitime for 24h\4Gb to each ASA and the volume of traffic or time never pass in this case, KeepAlive is enabled to the ASA hub as well. I see a number or a "spacing" all day with the same reasons for termination that I presented above. Anyone has a suggestion or idea why s2s VPN are hinged and how make them more stable even if the traffic is not flowing throughout.

    Thanks in advance.

    Sergey,

    No matter how lucky you have vpn time-out configured on one of the sides (it may be in default group policy perhaps?)  (see the race from all political group | I vpn)

    "IPSec SA time-out"

    HTH,

    Marcin

  • Easy VPN with the Tunnel Interface virtual IPSec dynamic

    Hi all

    I configured easy vpn remote on a cisco 1841 and dynamic server easy vpn with virtual tunnel interface on the server (cisco 7200, 12.4.15T14)

    http://www.Cisco.com/en/us/partner/prod/collateral/iosswrel/ps6537/ps6586/ps6635/prod_white_paper0900aecd803645b5.html

    It works with easy vpn remote to the client mode and mode network-extesión, but it doesn't seem to work when I configure mode plus network on the client of the cpe, or when I try to have TWO inside the ez crypto interfaces. On the customer's site, I see two associations of security, but on the server PE site only security SA!

    Without virtual dynamic tunnel interface, dynamic map configuration is ok... This is a limitation of the virtual tunnnel dynamic interface?

    Federica

    If one side is DVTI and the other uses a dynamic map, it does support only 1 SA. If the two end uses DVTI or the two end uses dynamic card then it supports several SAs.

    Here is the note of documentation for your reference:

    Note: Multiple inside interfaces are supported only when the Cisco Easy VPN server and the Cisco Easy VPN client have the same type of Easy VPN configuration. In other words, both must use a Legacy Easy VPN configuration, or both must use a DVTI configuration.

    Here's the URL:

    http://www.Cisco.com/en/us/docs/iOS/sec_secure_connectivity/configuration/guide/sec_easy_vpn_rem_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1046365

    Hope that answers your question.

  • Easy VPN with IPSec VPN L2L (Site - to - Site) in the same ASA 5505

    Hi Experts,

    We have an ASA 5505 in our environment, and currently two IPSec VPN L2L tunnels are established. But we intend to connect with VPN (Network Extension Mode) easy to another site as a customer. Is it possible to configure easy VPN configurations by keeping the currently active IPSec L2L VPN(Site-to-Site) tunnels? If not possible is there any work around?

    Here's the warning we get then tried to configure the easy VPN Client.

    NOCMEFW1 (config) # vpnclient enable

    * Delete "nat (inside) 0 S2S - VPN"

    * Detach crypto card attached to the outside interface

    * Remove the tunnel groups defined by the user

    * Remove the manual configuration of ISA policies

    CONFLICT of CONFIG: Configuration that would prevent the Cisco Easy VPN Remo success

    you

    operation was detected and listed above. Please solve the

    above a configuration and re - activate.

    Thanks and greetings

    ANUP sisi

    "Dynamic crypto map must be installed on the server device.

    Yes, dynamic crypto is configured on the EasyVPN server.

    Thank you

  • El Capitan permissions bad for lib with multiple users

    On my Mac with multiple users and running El Capitan, I encountered a problem with an application (GoGlobal) failed to start with "errno = 13", which is a problem of permissions with usr/local/lib /.

    I determined that on Yosemite, usr/local/lib was owned by root and permissions: drwxr-xr-x. However, on El Capitan, usr/local/usr / local / lib lib is owned by one of the nicks (random?) and has permissions drwx-, which is the source of the errno = 13.

    I got around the problem by chmod 755 to lib /, but I fear that a future update will reset these permissions impassable previous values. Please correct these settings in install and update routines.

    GoGlobal isn't a request to Apple. You can send your message to the developer, who develops not only the Application itself, but the installation script that puts in place of its components.

  • I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

    I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

    Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

    http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

  • Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

    Can bookmarks be portable to multiple computers? Is it an option to connect and use my favorites with multiple computers and locations? Thank you

    https://support.Mozilla.com/en-us/KB/what-Firefox-sync

  • How to export to pdf 1 sheet in a document with multiple sheets

    As the title says, my numbers document has several sheets.  I need to export one of these sheets as a pdf document, but instead it exports all sheets in a single PDF with multiple pages (1 page per sheet).

    Grateful for your help!

    Hi Michele,

    Instead of export, go to the sheet you want and use the Menu > file > print.

    In the Print Setup Panel, choose this sheet.

    Click on print... to see the print dialog.

    At the bottom left, click on the PDF pop up.

    You can open a PDF in preview (and print it from there), or print in PDF format.

    Click done to return to your document.

    Kind regards

    Ian.

  • Indicator of waveform data dashboard with multiple locations

    I have a chart in waveform with multiple locations on my main VI running.

    I use the Application Dashboard data 2.2.1 on my Ipad to monitor table of wave shape of my running app.  I placed a marker on my Ipad and also related waveform with my waveform array variable.  I can't play my data dashboard application because it shows unable to connect to the server.  I noticed that it is because of multiple plots being plotted on my table of waveform.

    I could only play the App data dashboard when it is just a single parcel related to an indicator on the App.

    My question is if it's possible to have a graphical indicator of waveform on a data dashboard that has several plots being plotted and not only a single square, and how to configure it?

    Thank you.

    Click on Bravo and select as an accepted answer.  You are welcome.

  • Using Outlook Express 6 with multiple identities.

    Had the hard drive problems.  He has been replaced by Dell warranty.  I have set up outlook express 6 with multiple identities.  I can't go from one to the other identity and return to the original, without having to restart my computer.  Dell has said that some things need to be changed to make it work properly.  They tell me what they were without a heavy load.  I used to use this feature with my old hard drive.  Help me please if you can...  Thanks in advance.

    Hi El KG,

    1. do you receive error messages or error codes?

    You can read the following article and check if it helps:

    OLEXP: "identity switch canceled" when starting Outlook Express

    http://support.Microsoft.com/kb/224463

    Also check the following links:

    OLEXP: How to create and use identities in Outlook Express 5.x and 6.0

    http://support.Microsoft.com/kb/209169

    http://www.Microsoft.com/Windows/IE/community/columns/identity.mspx

    http://social.answers.Microsoft.com/forums/en-us/outlookacct/thread/b53f3c5a-3733-4510-91dB-a23dc6224fc5

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to create vpn with vista home premium on basis of vpn xp settings?

    I can connect to the vpn with xp machine, but when I try to imitate xp setting with machine to vista Home premium I can't connect to the same vpn. What do you suggest me?

    How to create a vpn connection in Vista: http://techrepublic.com.com/2346-1035_11-61437-1.html?tag=content;leftCol.  NOTE: I don't know what you mean "based" vpn xp settings, but you will have to do the best you can with the options and settings available in Vista (that I n "' t know how they compare to XP, but I hope that you will be able to do so because).

    Here is another article on the procedure: http://www.publicvpn.com/support/Vista.php.

    Here is an article on how configure a VPN with an ISP in Vista: http://www.web-articles.info/e/a/title/How-to-create-a-VPN-connection-over-your-ISP-connection/.

    Here is an article with a number of different other items all on vpn in Vista (I don't know exactly what type of configuration you "AVIC - as a host, as a customer, on what type of connection,--but this article covers many different aspects and I hope that at least a couple will be a help for you: http://compnetworking.about.com/od/vpnsetup/VPN_Setup_How_to_Set_Up_a_VPN.htm.)

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • HP Envy 17 built-in screen went black after system updates.

    Hello! Earlier today, after updates monthly to Win 7 Home Prem (64 bit, Engl.)  I had the problem with the display of colors with my HP Envy 17. It turns out that caused Windows Silverlight (?) to indicate only a few 256 colors (?). So I plugged anot

  • Re instal an icon in the Notification bar

    I managed to delete the network icon in the Navigation bar don't know how I would like to re - install, but it cannot know

  • Wireless hp J6450 printer

    I bought a j6450 to vacation and installed on the computer wireless but then tried to open my programs like adobe, prof. Office photo and several others.  The programs would fail, so I contacted hp and they told me to uninstall and reinstall.  Fact u

  • Unable to upgrade to Windows 7 Home Premium Vista Home

    I tried several times to upgrade to Windows 7, but I get the following response when running the upgrade; These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel th

  • Trying to create the backup system, error 0 x 8100037

    Hi there :) Recently, I tried to create a system backup to an external drive for his failure at the end of the process. He gave the error code was: error 0 x 100037 Around research on microsoft sites and other forums don't have updated the no respons