Safari iPad Air links don't work do not

Hello, we have an iPad 2 Air and Safari has stopped working properly since yesterday. I think we could do with updating.

Turning Javascript power is a work-around.

Ask yourself is better to wait a few days for Apple released an update to the update? As I see others having the same problem. Cheers, Adam

I'd say wait an other update, or you can use another browser as a work-around until it is resolved.

Tags: iPad

Similar Questions

  • Install fees HCM 9.1, but the links don't work do not. Help please

    Dear all,

    I'm trying to make a move to the SAP to PeopleSoft. I thought it is easier to install TFTP since the number of installation source is much less than SAP. However, I kept getting same error where the links does not work no matter which environment I tried to install.

    I downloaded all of the software delivery.
    HCM 9.1, PTOOLS 8.52, Oracle 11 g 64 bit, Oracle Client 32-bit.

    First test:
    Install on windows 7 64 bit. Everything works fine until the first connection to the TFTP and all links doesn't do not.
    Hakan suggestion is to apply the patch and gave me a link to the old FTP site. I downloaded the patch 85209 but got the password.
    Finally I managed to get a customer to a friend ID and downloaded Patch 85211 and applied. But received error java so I put discarded it.
    Anyway, Gasparotto said the environment is not certified and will not solve my problem with the patch.

    Second test:
    Installed Virtual Box.
    Installed Windows 2008 R2 and apply the SP1.
    Installed all over again.
    Insured the similar PTWEBSERVER the username password.
    Everything works fine, but when connect to TFTP, once again... the links does not and see in the lower left corner there are a javascript error where they don't find some objects of peoplesoft...

    Just upgraded to IE 9 because I read somewhere that IE 8 is not certified.
    Tried to log in again, no error message and all seems well, but... the links don't work do not.

    Newspapers seems normal to me.

    Anyone who ever encountered similar problems before?
    Fact it is normal behavior before the tools patch 85211 applied?

    Thank you
    aLuNa

    My APPSRV journal:
    ----------------------
    PSSAMSRV.12 (0) [03/11/12 09:04:46] (0) PeopleTools release 8.52 (WinX86) from. Tuxedo server is APPSRV 99/100
    PSSAMSRV.12 (0) [03/11/12 09:04:46] (0) used Cache Directory: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
    PSSAMSRV.12 (0) [09: 04:46] (0) 03/11/12 server started
    PSRENSRV.2808 [03/11/12 09:04:49] (0) PeopleTools release 8.52 (WinX86) from. Tuxedo server is RENGRP 92/101
    PSRENSRV.2808 [03/11/12 09:04:49] (3) go to the new C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG log file
    PSADMIN.2124 (0) [03/11/12 09:04:52] (0) attempt to end on the HCDMO field boot
    PSAPPSRV.1488 (3) [03/11/12 09:13:16 GetCertificate] (3) return of context. ID = PTWEBSERVER, Lang = FRE, UStreamId = 091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
    PSAPPSRV.1488 (5) [03/11/12 09:13:21 GetCertificate] (3) return of context. ID = PTWEBSERVER, Lang = FRE, UStreamId = 091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
    PSAPPSRV.1488 (7) [03/11/12 09:13:29 GetCertificate] (3) return of context. ID = PS, Lang is FRE, UStreamId = 091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
    PSAPPSRV.1488 (34) [03/11/12 09:18:47 GetCertificate] (3) return of context. ID = PS, Lang is FRE, UStreamId = 091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

    alunwawa wrote:
    ...
    my configuration.properties file:
    psserver = HARTONO:9000
    joltPooling = true
    DomainConnectionPwd = {V1.1} 6O5vpwGxd5o =
    WebProfile = DEV

    AppDesigner 3tier mode does not care webprofile and Web server. It doesn't use any.

    an idea of the JOLT_CAT:1592 error?

    I think you misunderstandoog 3tier mode.
    3tier with AppDesigner connection is a direct connection to the application through the WSL port server, not on the Web or JSL port server or.
    So first WSL must be activate and port configured on the appserverver.
    Second, your client should point to WSL port (7000).

    You can learn more
    http://Gasparotto.blogspot.nl/2010/03/PeopleSoft-database-connectivity-part_28.html

    Nicolas.

  • Some links don't work is not on iPhone/iPad

    Hello and happy new year,

    I have a strange problem and not sure where to ask, but maybe someone has experienced something similar.  I create a digital magazine using InDesign, I use Adobe presets to create a PDF file for distribution to subscribers.  I use the parameter to include hyperlinks.  Inside of the document I have links of different types (some just text links and some photo links), usually when an image is clicked, it routes the end-user on the advertisers site.  It works fine for all hyperlinks on the whole when I'm on my PC.  I can then post the link to the PDF document in the Safari browser on my iPhone more 6 and all hyperlinks work, but two.  However if I open the document in iBooks none of the links work at all.  If I use Google Chrome on my iPhone that all the links work.

    I was wondering if maybe the two links that do not work had something unique, but they are no different than other links that are not working so I am at a loss.

    Thank you for reading

    I saw a solution to the problem, still don't know why the original file did not work but I eventually re-create a sample page to share and it has worked very well in all areas, so I guess that just something has gone wrong.  Thank you for your answers and help, I greatly appreciate it.

  • The links don't work is not inside layers div w / absolute positioning / z-index

    My page has a picture of 100% swf full page in a div z-index 1. on the top is another div z-index 2 with links to other pages of my site.

    First of all the links should work in the layer upper div with absolute positioning?

    If yes what Miss me? When I click on the links, nothing happens.

    code-

    " < html xmlns =" http://www.w3.org/1999/xhtml "XML: lang ="fr"lang ="fr"> ".
    < head >
    < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
    sitename < title > < /title >
    < script language = "javascript" >
    AC_FL_RunContent = 0;

    function MM_preloadImages() {//v3.0
    var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();
    var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)
    If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}
    }
    < /script >
    < script src = "AC_RunActiveContent.js" language = "javascript" > < / script > "
    < style type = "text/css" >
    < / style >
    < link href = "css/layout.css" rel = "stylesheet" type = "text/css" > "
    < / head >

    < div id = "contentWrap" >
    < div id = "contentHead" >
    < div id = "logo" > swf with link < / div >
    < div id = "Visibility" > swf with links < / div >
    < / div >

    < div id = "contentBody" >
    < div id = "body" > content Page, photos and download links < / div >
    < div id = "bodyBG" > box translucent (transparent wmode) swf < / div >
    < / div >
    < / div >


    < div id = "footWrap" >
    < div id = "footSpacer" > < / div >
    < div id = 'foot' >
    < div id = "catlogo" > link of the swf logo < / div >
    < / div >
    < / div >
    < / div >

    < div id = "wrap" random images of > 100% background swf < / div >

    < / body >
    < / html >

    CSS - code

    @charset "ISO-8859-1";
    * {
    margin: 0px;
    }
    #wrap {}
    height: 100%;
    Width: 100%;
    min-width: 1000px;
    min-height: 700px;
    z-index: 1;
    margin: 0px;
    position: absolute;
    }
    {#contentWrap}
    height: 100px;
    Width: 100%;
    min-width: 1000px;
    min-height: 700px;
    z-index: 2;
    position: absolute;
    }
    {#contentWrap #contentHead}
    height: 25px;
    Width: 100%;
    padding-top: 50px;
    padding-bottom: 25px;
    }
    #contentWrap #contentHead #logo {}
    height: 25px;
    Width: 155px;
    padding-left: 50px;
    float: left;
    }
    #contentWrap #contentHead #topNav {}
    float: right;
    height: 25px;
    Width: 567px;
    padding-right: 50px;
    }
    {#contentWrap #contentBody}
    height: 85%;
    Width: 100%;
    min-width: 1000px;
    min-height: 550px;
    }
    #contentWrap #contentBody #body {}
    height: 485px;
    Width: 860px;
    right margin: 50px;
    margin-left: 50px;
    float: left;
    padding: 20px;
    z index: 3;
    position: absolute;
    }
    #contentWrap #contentBody #bodyBG {}
    height: 525px;
    Width: 900px;
    right margin: 50px;
    margin-left: 50px;
    float: left;
    }
    {#footWrap}
    height: 100%;
    Width: 100%;
    z index: 3;
    min-width: 1000px;
    min-height: 700px;
    position: absolute;
    }
    {#footWrap #footSpacer}
    height: 90%;
    Width: 100%;
    }
    {#footWrap #foot
    height: 10%;
    Width: 100%;
    text-align: right;
    }
    #footWrap #foot #catlogo {}
    float: right;
    height: 16px;
    Width: 80px;
    padding-top: 25px;
    padding-right: 50px;
    }

    The only thing that will cause links not working, that is if there is a positioned element by hiding links from mouse events.  In your case, it would be #footWrap div that is SUPERIOR to any other element on the page (with a z-index 3).  "But not' tell you, because div #body has also a z-index 3, to which I say" you forget that div #body is contained in the #contentWrap div that has a z-index of 2, so #body div has a z-index effective from 2-in regard to the rest of the page is concerned. "  The z-index 3 is ONLY IN THE CONTEXT OF THE PARENT DIV.  Div #body would be higher than another brother positioned with a z-index of 2 and less than another child of the same parents with a z-index of 4, but each of them would never to anything other than a z-index of the 2 visa-vis the page.

    Furthermore, your complete disposal scheme is sure to cause problems.  This isn't the purpose for which the absolute positioning was intended...

  • Email links don't work do not

    Whenever I click on a link on an email in windows mail I get the message "the file does not have a program associated with it for performing this action to create an association in the set associations Control Panel '..." Can you help me please?

    See the answer of Bruce.  I thought you meant mailto protocol.  If the suggestion of Bruce doesn't fix it, then set the HTTP and HTTPS protocols to be handled by IE.

    Steve

  • My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

    My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

    Tuesday, July 17, 2012, 10:53:01 + 0000, JonathenHarmon wrote:

    My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

    Of course, it sounds like a hardware problem, not a a Windows.
    Contact Acer for repair.

    Ken Blake, Microsoft MVP

  • IPhone 6 s / links don't work

    Hello

    My iPhone (iphone 6s 128 GB) updated to IOS 9.3 overnight. Now the links no longer work.

    For example, in Safari, if I google something and click the link, the Safari browser all crashes.

    Also, when I click on the links in my email, I have the same problem.

    I tried to reset the cache - that changes nothing. Just the 6s freezes.

    Does anyone have any suggestions?

    Thank you!

    It is a well known problem with the recent release of iOS 9.3, Apple is working on a solution. You can solve the problem for Safari by disabling Javascript, to do this, go to: settings > safari > advanced > then disable 'Javascript '.

    That should fix the links in safari. If this does not work, then you can also change your search engine "Bing" (I know it feels like a stupid thing to do) and also erase data from site. "

    As far as I know (and I recently spent 30 minutes in line with apple, trying to find a work around) there is no solution yet to the problem with the links in messages, safari, notes, etc. So we'll just have to wait for an update.

    Your other option is to do a restore in iTunes, but I have my doubts about it as the operating system would remain at 9.3 (respective of iOS of the backup) so I think that the fault would stay or simply remake surface.

    Good luck!

  • Click on a transparent background on mouseover layer and the link doesn't work is not on

    Hello

    Here is the link to the page under construction: http://brandprint.businesscatalyst.com/products.html

    The link on the square boxes don't work on Firefox, except when the upper part of the box is clicked in the square boxes. In other browsers, links work very well.

    Any help is very appreciated.

    Thank you.

    Your bearing works... because the link, ime that leaves the layers themselves as an option. Add a new layer (above the base layer that everything is on) then place the bearing and test.

  • Come on Apple to fix this, the links don't work and crashes it on ios

    iPhone 6 s 128 GB started having the same problem. Updated to ios 9.3 always the same.  As many have done, I tried all reasonable things to solve the problem. Nothing has worked so far.

    He isn't supposed to go back to factory settings and then restore, seeing the number of people having the same problem, it is obviously that a problem Apple should fix the problem.

    Apple knows that the update is screwed up and they are working on a fix. You may be able to get help here the issue of links in Safari.

    http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

    antiphellus wrote:

    He isn't supposed to go back to factory settings and then restore, seeing the number of people having the same problem, it is obviously that a problem Apple should fix the problem.

    I don't necessarily agree with this statement. If you backup regularly as you must and should do this just before the update, and if you restore the device to factory and then restore the backup - and if it solves the problem, which is not supposed to on this?

    Even in the best of cases, when the overwhelming majority of the people to day without problem, a small percentage of users have problems and restore can solve these problems for them

  • write links don't work in firefox using windows live mail

    I use windows live for my email client. None of the mailto: links work with windows live in firefox. I checked and double checked all the settings and confirmed windows live is my default e-mail client. They work in IE 9 and Chrome, but not firefox.

    You can remove and Add again and see if that helps. The choice of "Application Détails" at the bottom of the drop-down list will allow you to delete the one you currently have.

  • Why the pdf links don't work for Muse in preview mode?

    I want to add PDFs on my Muse site, but they are not opening in preview mode. I have the PDF files loaded as files in my property and make them related to the text on the page. But, when I hit the preview mode, the links do not work. Any tips? They were always open when the site is published?

    They will not work if you use the file > Preview in browser or file Page > Site overview in the browser. They do not work for the preview window integrated into the Muse.

  • DB between 11.2.0.2 and 11.2.0.3 DBs version link doesn't work does not correctly

    Remote schema in 11.2.0.3 DB


    In 11.2.0.2 DB, I created a link pointing to a diagram in a DB 11.2.0.3 DB
    -- Used the new 11.2 syntax (similar to easy connect )
    
    SQL > CREATE DATABASE LINK dropLater CONNECT TO SCOTT IDENTIFIED BY SCOTT_123 USING 'blpclst-scan.ap.haster.com:3587/SNPG_AP.ap.haster.com';
    
    Database link created.
    
    SQL > select count(*) from ind_names@dropLater;
    select count(*) from ind_names@dropLater
                         *
    ERROR at line 1:
    ORA-00942: table or view does not exist
    ORA-02063: preceding line from DROPLATER
    
    
    
    -- But the Sysdate from dual test is working fine
    
    SQL > select sysdate from dual@DROPLATER;
    
    SYSDATE
    --------------------
    21 Nov 2012 13:24:29
    IND_NAMES Table exists in the remote schema SCOTT. Anyone faced a similair with DB links problem?

    I think that this problem is due to the difference in version (11.2.0.2 to 11.2.0.3)

    Hello

    I don't think that the other version is giving the problem.

    It seems that the SCOTT user doesn't have access to this table in the remote database.
    It seems odd if you say that the IND_NAMES table doesn't exist in the remote schema SCOTT.

    Could you run the following statements and see the objects owned by the user SCOTT in remote db?

    SELECT * FROM user_objects@droplater;
    

    If the table exists in the remote schema SCOTT should appear in the output among other objects belonged schema SCOTT.

    Kind regards.
    Al

    Published by: Alberto Faenza on 21 November 2012 14:55

  • Windows Update link doesn't work is not in Windows XP Pro

    Hi all

    Something strange has happened and I don't know what.

    When I click on the 'Windows Update' shortcut I get a dialog box "Help & Support", that tells me that I am not connected to the Internet and an Internet connection is sufficient.  Well, I'm connected to the Internet and I can load IE and surf the web without any problem.  I can get to 'Windows Update' by clicking on 'Tools' then 'Windows Update', while that in IE, but the abbreviation of "Windows Update" no longer works.

    Does anyone have any ideas where I could look for problems?

    Thanks for any help,

    Charles

    Hello

    Thanks for the information.  I went ahead and continued to install windows updates.  After a couple more installs and restarts the 'Windows Update' shortcut has started working again.  I have no idea why, in fact, this is the first time I've ever seen this type of error.

    In any case, the WU shortcut works for now.

    Thanks for the help,

    Charles

  • Recovery and system recovery disks don't work is not on the MS213 Pavilion (All in One)

    Hello

    I ordered the HP recovery discs as F11 will not work. I got 4 disks with one separated from the others. He said "use this first! The other 3 were combined, and they are marked the system recovery and disc 1 of 3, 2, 3 and so on. I restart the computer with the disk that says use this first. The disc starts to load and says loading files of Windows, or somehting like that. Then he said: Windows startup. I don't get the Recovery Manager menu. After a few seconds it ejects the disc, and there are 3 pictures on the screen, at the top left is like a circle with a check mark in it. With an arrow, it points to an ejected drive of a computer image on the disc tray. And it points to a picture of a computer with 3 drives. It seems that he tells me to put in the next disc. I put in one that is graduated from 1 to 3, the light on the drive flashes, and then nothing happens, regardless how long wait. If, instead of starting with the disk that says this first use, I start with the one who said that 1 of 3, after loading Windows files, it says something like "this disc is not for this computer.

    System information:

    HP Pavilion MS213 all-in-one

    Windows 7 64 bit

    Configuration of stock

    Background:

    It is a friend's computer. She was making a mistake "code purple" with the resumption of F11. She had someone watching and I don't know what they were doing, but when I got it, I was getting an error at startup. somehting like cannot find the Boot...

    I found a commercial version of Win 7 64 bit standalone disc and installed on the machine. It runs great, but it had to be for troubleshooting only, until I have the recovery disks.

    So, I'm stuck and would appreciate any help. I thought initially upgraded to Windows 8, but I thought that the recovery disks will be cheaper, and also the friend doesn't have to go through the inclination of windows 8.

    I will be happy to provide more information if necessary.

    If you can read the license key Microsoft Windows 7 of 25 characters related to the machine, you can download a Windows 7 ISO file to burn to a DVD. Remember, it is the version that is listed on the Microsoft COA sticker.
  • User accounts - &#62; user accounts to manage a link doesn't work is not in Windows 7 64 bit

    Hello

    I tried to open the Panel-> user accounts-> accounts less manage accounts does not create a new account link. My OS is Windows 7 64 bit. 32-bit Internet Explore doesn't work. I tried to register the dll files to 32-bit internet explorer, but it does not work. Please help me.

    Hi Madhavaarimilli,

    -You receive an error message when you try to create a new user account or access to Internet Explorer 32-bit?

    First of all, I suggest to start the computer in safe mode and check if you can create a new account on your computer. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode, select it and press ENTER.

    Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    To create a new user account follow the steps below:

    1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

    2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. click on create a new account.

    4 type the name that you want to assign to the user account, click an account type, and then click create an account.

    If the problem persists in safe mode, I would say allowing you to run the auditor of file system (CFS) analyze and check if if helps solve you the problem.

    To run the Scan SFC follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command calls, the following line and press ENTER: sfc/scannow

    Access the link below to learn more about the execution of the System File Checker:

    http://support.Microsoft.com/kb/936212

    For question connects to open Internet Explorer, I would say to run the Internet Explorer troubleshooting utility built into Windows 7 and check to see if it helps you solve the problem.

    To run the Internet Explorer troubleshooter, follow these steps:

    1. close all programs.

    2. click on start and then click Control Panel.

    3. under system and security, click on find and fix problems.

    4. in the left pane, click View all.

    5. click on Internet Explorer Performance. This opens a new window.

    6. click Next.

    7. the resolution of the issues will take place and try to solve the issues raised everything automatically. Click Close.

    After the store has run successfully, check to see if you receive the same error.

    Also access the link below and follow the steps to solve the problem with Internet Explorer.

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

    Hope this helps and return to view the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for