Safari keeps closing in 5 minutes after startup

Similar Questions

• General failure on Ping and TraceRT by WAN IP for 15 minutes after startup

  My Windows 7 64 of Profession will expose this problem.

  After startup, it cannot access anything whatsoever outside the local network.  I can ping, DRC and usually access anything whatsoever on the local network, including the router.  But trying to access what anyone outside the LAN does not work.

  Ping Returns the Timeout on the first response, and then general of failure for the other three.

  Tracert immediately returns a general failure

  I am ping IP address, no domain name, is not a DNS problem.

  After 15 minutes or, the problem resolves, and starting the machine works fine.

  Occasionally (once a day or more), it will return to the problem of General failure for 15 minutes, then return to normal.

  The problem does not occur in safe mode with network.

  The problem occurs whether the user is logged on the machine.

  I have disabled the Windows Firewall to try to resolve, without success.

  I also installed McAfee.

  Thanks for any help that anyone can provide.

  CP71

  I would start by removing McAfee and using MSE at least to test.  You can not just disable McAfee, it should be removed and he is known for this type of problem.

  McAffe often contributes to BSOD

  
  

  I remove and replace it with Microsoft Security Essentials

  
  

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

• Windows Vista (64-bit) crashes a few minutes after startup is complete. Difficult to get out of the lock start.

  After a Windows updated 12/09/2009 from my computer stopped working.  It starts (without error) and then freeze a few minutes after loading Windows.

  I removed all the updates of Windows since mid-November, but this has not fixed the problem.  I also tried to boot to the last known successful configuration and has followed the procedures of "clean boot upward" found elsewhere on this forum.  None of these actions resulted in necessary corrections.

  Any other ideas?

  Hi lizseh,

  Welcome to Microsoft Answers Forums.

  I suggest you to restore the system to a previous state where it was working fine and check.

  To restore the operating system to an earlier point in time, follow these steps:

  1. click on start toreduce this includes this image, type System Restore in the Search box, and then click System Restore in the programs list. Collapse this includes this image

  2. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  3. in the System Restore dialog box, click choose a different restore point, and then click Next.

  4. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  5. click on Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  For more information, please visit the link below,

  http://support.Microsoft.com/kb/936212

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop keeps freezing a few minutes after opening.

  Data sheet:

  Acer Aspire EA40_HC model E1

  with Intel Core i3-2348 M @ 2.30 GHz CPU processor

  and Intel HD 3000 Graphics

  Windows 8 Pro

  RAM: 4.00 (2.58 GB usable)

  System type: 32-bit operating system, x 64 based processor

  ========================

  One day, I was playing CS, everything's fine, it works well, I know that my pc is not the best for playing games, I'm running with fps constant of 40-60 which is not obtained, but not bad either. I removed my battery of laptop, but kept plugged in because I know that if you kept it loads during use, it can decrease the life of the battery power. A few hours later in the game, my laptop just turned off. I don't know why, maybe the charger has been moved and unplugged then I checked. He was actually plugged in nice and safe, and I don't think it was the cause of the laptop to turn off or maybe it was. Then I turned on my laptop. Every thing seems fine but the 'Welcome' screen any longer that it was. A minutes and continues the 'welcome' to display. I know something was wrong because who usually took only a few seconds to load. I turned off my pc and opened it again. Nothing had changed, it is still stuck on the Welcome screen. So I waited a little longer, now 3 minutes, I saw the circle of loading thingy is frozen and non-mobile.

  I'm a little worried that I just broke my laptop, I tried a few corrections in the internet, but I can't find. I went advanced startup settings and did a system restore and choose the settings of only a few days.
  The system recovery succeeded. I restarted my PC, I was so happy that I fixed it, for so I thought it was. I open Google chrome, but as soon as I pressed the Enter key everything froze. Same office does not. I restarted my pc again. The start-up took a little longer. After going on the office a few minutes later the pc simply froze again. I can't do anything. I've been waiting so he could meet again for 10 minutes and still frozen. I restarted my pc and was able to put it in SafeMode before it froze again. And everything works fine in safe mode. I can still surf the internet but can't actually play cs: go in what is sad. I can still play undertale but which is nice. When I put back it in normal mode, it keeps freezing after a few minutes.

  If someone out there who can help me understand what causes this and how to solve my problem I would appreciate it a lot! :)

  Too long and did not read?: my PC turns off suddenly, when I boot it its stuck at welcome screen upward.

  Did a system restore and solved the problem but now it keeps freezing and not responding do not.

  Set it in safe mode and everything is fine but only limited.

  Read for more details.

  Hello

  Games can be hardware intensive (graphics, etc.) and your problem seems to come from a special combination of games and an accumulation of dust in your laptop causing it to cut.

  It may be an overheating problem and it is normally the main reason for your problem.

  .

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

  Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons for your problem:

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  _______________________________________________________

  Safe operating temperatures of criticism:

  "What should be the temperature of my processor in the computer?

  http://www.computerhope.com/issues/ch000687.htm

  @@@@@@@@@@@@@@@@@@@@@@@

  It is difficult to know what is the cause of the gel.

  It may be a number of things.

  But to rule out a software problem as follows.

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "How to optimize the performance of Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/37511-optimize-performance-Windows-8-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Worth the read as:

  "How to optimize Windows 8.1 for a desktop PC.

  http://www.howtogeek.com/167013/how-to-optimize-Windows-8.1-for-a-desktop-PC/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  " " Performance & maintenance"

  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I would check to see if it has damaged system files.

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• System freeze about 5 minutes after startup. Can move the mouse, but can't do anything else.

  Computer Compaq laptop turned on updates of Windows, firewall Windows, AVG anti-virus, etc.
  He has suddenly frozen 8 months ago - would not respond other than to be able to move the mouse.
  Does not "left/right mouse click" or "Ctrl + Alt + Del" or "power button."
  After a long waiting, pulled out the battery/power supply.

  Restarted in safe mode, was able to run AVG, but froze again.
  Has helped me select the AVG window and move it autour, but nothing else.
  Was not able to click with the right button on the taskbar to make appear the Task Manager.
  Only way to reboot was to remove the battery/power supply.

  Same thing, it is is happening whenever I start.
  System access for about 5 minutes and then freezes.

  I am able to get into the system at the start restore.
  Have a lot of personal photos on the laptop.
  Please provide a solution so that I can extract the photos and then restore the phone to factory settings.

  Thank you.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.Compaq.com/country/cpq_support.html

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• the mouse cursor sticks 5 minutes after startup

  I'm not terrible with my mouse cursor.  I start as usual - all seems to work.  Then after 5 minutes the cursor sticks.  I tried to reset then close down and ty again.  Doing this for two days now.

  Hello

  1. when the question is is produced?
  2. you remember to make changes to your computer before the problem?
  3. are you using a cable or a wireless mouse?

  Follow the steps mentioned below and check if the problem persists.

  Step 1:

  Start your computer in safe mode and check if the problem persists

  Step 2:

   
  If the problem does not persist in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

• Wireless networks disappear minutes after startup

  I start my desktop PC (Windows 7) and everything works fine. I am connected to my wireless router and have access to the internet.

  Then a problem occurs, sometimes only 2 or 3 minutes later, sometimes around 5 or 6 minutes later.
  The computer loses internet access, but remains connected to the network. After a few seconds, the internet is back.
  After a few times, the computer finally loses the connection to the network, and then the network (as well as other networks that were in the range) is no longer there.
  I am currently link this on my laptop which is right next to my office. My laptop is connected to the router wireless (and internet) without any problem.
  I've been struggling with this for a while now and there are only a few hours, I deleted Norton anti-virus with the Norton Removal Tool. No change.
  Map of TP-Link in the problematic PC wireless network is only about 2 years old. I think my next step is to buy a new card netword, thoughts?
  EDIT - I forgot to mention. I uninstalled and reinstalled the NIC several times. No driver updates available.
  I just thought an idea. Before buying a new card, I'll see if I can install this on my brother's PC. So I'll see what happens.

  Hi Mike,.

  You are facing problems with an internet connection in Windows 7.

  Were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Why my safari keep closed

  Each time, click on my safari, it maintains close why is this?

  Many users report this bug.

  Go to the settings / Safari

  Disable search engine Suggestions

  Disable the Safari Suggestions

  Disable Quick Web Search site

  If it does not help activate surf private mode.

  To Apple bug report: http://www.apple.com/feedback/

• my safari keeps closing on my iphone 6 s

  Hello

  Safari stops everytime I open a new page on my safari and try typing the name of the Web site. I did the last update of the operating system software

  Help!

  Many users report this bug.

  Go to the settings / Safari

  Disable search engine Suggestions

  Disable the Safari Suggestions

  Disable Quick Web Search site

  If it does not help activate surf private mode.

  To Apple bug report: http://www.apple.com/feedback/

• MSN keeps disconnecting a few minutes after I connect.

  original title: Logout MSN

  My guard msn disconnect me every few minutes, I connect to msn and start chat from my contacts, then it just logs out me automatically and told me to press a button saying connect. This has happened for almost a week now. It works pretty well when I'm at home, but not when I'm at the office and my office colleagues don't know this error. Y at - it something wrong with my profile. Appreciate your help. Thank you.

  Hello

  Given that the problem is related to Windows live messenger, I suggest you to post the question in the forums and check them off below if it helps:

  http://windowslivehelp.com/forums.aspx?ProductID=2

  It will be useful.

• Computer crashes to 2 or 3 minutes after startup, sometimes said "not genuine Windows".

  Hello!
  I have a Toshiba Satellite L750D. Windows 7.
  Everything works fine when there is 3 months, I bought the laptop.
  A few days ago, it started to happen:
  The computer starts correctly, Windows starts up, watch the user login screen. Everything works well so far.
  This desktop computer, runs Windows as usual. Two or three minutes later, it becomes terribly slow. So slow that just try to open Explorer takes like 5 minutes... Then the situation becomes unbearable, it's as if the computer crashes.
  Then I have to stop it manually (by pressing button On / Off for 5secs).
  In another time, share this problem, it appears at the bottom right of your desktop that the copy of Windows is not genuine.
  I know that it is authentic, I bought the laptop and I have activated Windows correctly. But hey, this is a minor issue and only happens 1/3 of the time I try to start the computer. The main problem is that Pseudo-gel of infinite of Windows.
  Start in Safe Mode does not change the problem at all. It starts well and like 3 minutes later, becomes terribly slow.
  I can solve the problem somehow (running antivirus, etc.) because I can't throw soft...
  Appreciate your comments on this issue,
  Best regards
  Joel Mollering

  Hello!
  Thank you for the comments, but since the computer is a Toshiba, it has a default System Configuration that allows me to restore the laptop in fabric, without having to start windows.
  I did, I lost a couple of files, but now everything is ok.

  Thank you

• AT100s Wi - Fi freeze a few minutes after startup

  The option check Wi - Fi freezes on "off" by its own. Basically it s turn off and freezing while I m using the Tablet somehow.

  Also the hardware buttons like volume + &-aren t working and the power button won t work unless I force close the Tablet pressing long on it.

  Hello

  Set the default Android system back and factory settings and try again.
  Maybe the system is fucked up due to the installation of some 3rd party applications.

• Computer stops in 3-5 minutes after startup

  Boots, slowly, but eventually the boots completely.  Stop with no warning, no error message.  Windows restore does not, but Control Panel, Explorer open straight.  Both the monitor and CPU at the same time stop.  Starts in routine diagnostic Dell, but runs out of time before that anything can be verified.  All CP/power options are set to never.  Comp was woking OK, without recent changes / installs.  A few days before all this started OK ran Windows Security Essentials. Win XP SP3

  Appreciate any suggestions.

  D

  Thanks to all - those of you who wanted to return to material/heat were ahead of me, but you were right.  Finally got down and dirty, the plastic part that holds the main processor heat sink clips had broken, allowing the heatsink for the CPU.

  A new heat sink retaining clip, a little fat and we are back in the business.   Thanks to all - help each comment.

  THX once again

• My computer acer laptop keeps closing after about 5 minutes in standby mode. Is it possible to fix this?

  My computer acer laptop keeps closing after about 5 minutes in standby mode.  Is it possible to fix this.

  Original title: power shutdpwn

  Hello

  Have you checked your power options?

  http://www.thewindowsclub.com/configure-power-plan-Windows-8

• Had to reinstall Creative Suite Design Standard 5.5 after reset of Mac, so I lost all my applications. 3 minutes after completing installation, I get this QUIT SAFARI CLOUD HISTORIC message to complete the installation

  Hello, I bought Creative Suite 5.5 Design Standard in 2012, my iMac had problems for my apple store reset I lost all my applications. 3 minutes after completing installation, I get this QUIT SAFARI CLOUD HISTORIC message to complete the installation, I called Adobe but refer me, it is a forum. I really don't want to pay an extra $ every month I paid for this package, I want to just use it. Can someone guide me how to install best regards, Michel

  Hi Michel,.

  Please open the monitory of activity by going to Applications > utilities on your Mac. You can search any processes with the name of SAFARI COULD HISTO and close it. More detailed instructions can be found here: error with Adobe products: close the following applications.

  Also, make sure you reinstall your CS5.5 disc or direct download. If you use Time Machine or similar backup to restore your programs on your computer reformatted, you may encounter issues. Adobe programs do not correctly migrate due to hidden files permissions.

  Let us know if that fixes the problem reinstall CS5.5or if you need assistance.

  Best,

  Del