Similar Questions

• I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  I want to add a fingerprint on my iphone 5s, but I can't. It shows unable to complete Setup touchid please go back and try again. Please help what should I do?

  Keep trying. But first, I restart the phone.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If she agrees not always the fingerint, reset all settings. No data is affected, but you will have to re-enter all the parameters of the device and the phone will restart on its own. Settings > general > reset > reset all settings.

  Always make sure your finger is clean, free of any oily substance and the same goes for the home button on the phone.

• When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.

  I upgraded my 64 new image computer windows 7 Home premium Edition to windows 7 using the upgrade anytime professionoal.  I downloaded the fix for quad core to use virtual pc and windows xp mode.  When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.  I service request # 1182160056 but the phone lines of microsoft do not work.  Any suggestions?

  Have its possible that this is a download corrupted Windows XP mode, you tried to download it again and see if it works? Also, make sure that you first install Windows Virtual PC.

  Click Start, type: enable or disable windows features

  Press enter on your keyboard

  Scroll down and make sure that Windows Virtual PC is checked.

  Click OK

  Restart if prompted.

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• How do you want to give visibility to your campaigns to feed?

  Breath of email, I never really liked you and your poor performance, but I do not envy how it was easy to communicate to the team expanded internally.

  "We are launching an - nay, epic - heroic email that will go to tens - (hundreds?) thousands of people, in this day, and that's where the creative element. »

  "What is marketing do? Who has not heard of that? I hear it a lot to feed. "Why, we're busy, developing exciting programs complex, iterative, multi-step triggered behavior of the user, of course".

  There is a terrible analogy, but campaigns to feed a colleague compared to car accidents - they happen every day, but do not have national news. Explosions? Page completely.

  You have this problem of visibility to your campaigns to feed? How did you resolve?

  Hi Mark, what I always did and it has worked, is to transform my super automated and full of measures promoting the campaign.

  in a 3-column table:

  day 1 - teaching email - overview email link

  day 10 - Webinar - preview e-mail invitation link

  Day 18 - white paper - overview e-mail email link

  etc...

  And in another section/slide, I also add:

  -Objective

  -Segmentation description

  -The descriptions of rules (for example if the contact changes to the 'client', the lead will close)

  -Total

  I share this information with the teams involved, and then add a link in the CRM where people can access to see the email being marketing campaigns (link can lead to a wiki space or another tool that your business uses to share documents).

  Finally, in order to support and promote the campaign, I also advertise in our social network society and I publish weekly results.

• How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support a.

  How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support on this Web site, www.apple.com/support/itunes/ww/.

  Click here and ask for help from the staff of the iTunes Store.

  (145085)

• Installation in XP Mode indicates "cannot complete Setup. Please try again. »

  I followed the instructions to install windows XP Mode to the "T" and when he installed XP Mode to run for the first it gets all the way to the end and stops and opens a window that States "cannot complete Setup. Please try again. "I uninstalled and reinstalled everything several times, started the system in diagnostic startup and tried to install no difference. I'm running Windows 7 Pro with all the installed upgates. I even downloaded alternative sites XP_Mode and still the same thing. Has anyone else had this problem to get this installed and there at - it a solution? Help, please!

  Why I'm here I also have problems with Explorer Windows stops working and must restart. Any ideas on what could be the cause?

  See if this fix http://support.microsoft.com/kb/2519949 helps.

• Windows XP mode, could not complete Setup for first use

  The Setup program ran towards the end of the month and pop up with error captioned.

  Hello pCheuk,

  Check and see if you have a you have a bootable CD/DVD in your computer when you receive this error message. XP mode does not get initialized if there is a CD/DVD bootable in the drive when you try to complete the installation in XP mode.

  Otherwise, if this does not help, we require additional information to help with your problem.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• If you choose to download the originals to your device involved the complete iCloud library or only the items originally taken by a device?

  If you choose to download the originals to your device which means your iCloud full library or just the pictures and photos taken with this camera? For example, the pictures on your Mac which are also on the iCloud photo library, ones which also downloads to the device for example an iPhone?

  Thank you

  Originals of pictures of your current iCloud photo library will be downloaded into the unit, if you do not use 'optimize storage '.  Disable this option only on your iPhone If you have enough of free storage on the iPhone for the complete iCloud photo library on your device.

• Your purchase is not complete

  When I install an app, I have this error but I am connected to the internet

  Hello

  Please, try the suggestions mentioned here and see if this helps you:
  http://www.thewindowsclub.com/your-purchase-couldn ' t-be-completed
  Hope this helps, good luck :)

• SoftwareONE India Private Ltd. has added 1 licenses to your Adobe Creative Cloud account. Please contact your account manager to complete the purchase process or answer additional questions.

  Hello

  Hi Kunal,

  Seems that your dealer has added a license on behalf of your team.

  Please contact the dealer or administrator of the team for the same thing.

  Kind regards

  Sheena

• Cannot call the landline UK gets a voice message "sorry, but your call cannot be completed". "."

  Dialing my phone works.

  Hello
  I made some changes to our side that should have solved the problem. Please let us know if you are now able to reach the number.

• Cannot complete setup CF in Dreamweaver

  Beginners need help please.
  
  After the tutorial of ColdFusion MX 7 to start the Studio 8 package (so it comes to developer version, if that makes a difference) I get stuck when I receipt statement click the link of the RDS in the Panel of Dreamweaver database log-in, after having tested the site server. I get the error "the server name or address could not be resolved. The possible reasons: 1. the URL specified for the test of the site server is incorrect: http://127.0.0.1:8500/CFIDE/laptop.org/gettingstarted/tutorial/2. The testing server can be configured correctly (for example ColdFusion may not run). "Test server it's OK. I checked to see if jrun.exe is running, I guess it is at least a way to see if CF is running, and it is. I can log into the CF Administrator and have created a password for RDS online, and I could then add cftutorial.mdb to the administrator. I am running WinXP.
  
  I was able to go on in the tutorial to use the cftutorial.mdb in index.cfm sample, but at least that I can not connect, I can't display anything in the Panel of Dreamweaver database. Don't know yet what are the other problems that may arise in the future. Do not know why the developer version of the CF is not covered in the tutorial or why she and not a licensed version has been registered in the Studio. Seems of course they did this pretty long and hard. But what help and advice can be offered are greatly appreciated.

  Too bad, all the world! Not that someone has responded in any case. Laughing out loud
  Turns out that I must have screwed up at installation time. I checked the web.xml file in the inf folder and found that RDS has commented in two statements. Comments and I'm good to go.

• Dotnet 4.0, cannot be upgraded - "Setup cannot continue because a previous installation requires your computer needs to be rebooted...» »

  original title: Dotnet 4.0, cannot be upgraded.

  I need help on problem mentioned below, the error obtained when upgrading to 4.0 on XP with SP3 dotnet even machines with and without the dotnet 3.5 installed.

  "error: Setup cannot continue because a previous installation requires your computer needs to be restarted." Restart your computer and run the Setup again.

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=17851

  http://www.Microsoft.com/downloads/en/default.aspx

  For reference:

  How to reset the Windows Update components?

• Setup Media center IQ804 "everything works fine up until the cannot recognize the IR cables.

  TV Setup works well and channel 3 transmits the signal to the small screen TV and ATT remote control volume and lane change. The next in the Setup screen does not recognize cable IR so cannot complete Setup.

  Hello again, 215,

  Thanks for the quick response!

  As the error message persists after following the above document, I recommend following this thread on "Windows Media Center cannot detect the IR control cables", with responses provided by Gerardorm. This should help prevent the TV on channels, it detects no locking.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

  Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

  Here's the situation.

  I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

  I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

  Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

  Thank you in advance!

  Maybe not...

  The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

  I looked at your system and found this article that you can read to see if it sounds like your original question:

  Windows Setup could not configure Windows on hardware on this computer.

  http://www.Dell.com/support/article/us/en/19/SLN293812/en

  Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

  Could you take the issue in the Dell online community where experts hang out (especially your amber light).

  Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

  http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

  The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

  If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.