said CF administrator to connect to db is ok but the web page says unable to find the data source.

Similar Questions

• HP Officejet 5746 e-all-in-one: HOW to connect android phone randomly to print the data of the phone?

  I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data.  All directions?  TIA Doc

  You need a wireless setup to print from Android phones.

  Please see this link for mobile printing options available:

  http://www.HP.com/go/mobileprinting/

  WyreNut

• Connection to the data source in ColdFusion 8 vs FC 6

  Hi all
  
  I have a CF6 app that works well. However, I am in the process of upgrading to CF8, and code no longer works. I went through the documentation and found no information about the replacement code.
  
  My old code gets a data source, acquires a database connection, using the connection and then close the data source.
  
  
  variables.dsService is a CreateObject ("java", "coldfusion.server.ServiceFactory"). DataSourceService;
  variables.dsManager = dsService.getDman ();
  variables.dataSource = variables.dsManager.getDataSource (< data source name goes here >);
  variables.dbConnection = variables.dataSource.getConnection ();
  < insert here the code to use the db connection >
  variables.dbConnection.close ();
  
  Under CF8, the error message is "the getDman method not found." So, I've been unable to find any code that will allow me to have access to an object that implements DataSource, so that I can use my connections.
  
  Any advice would be appreciated.
  
  Mike K.

  In the end, I discovered that what I had was pretty simple

  variables.dsService is a CreateObject ("java", "coldfusion.server.ServiceFactory"). DataSourceService;
  variables.dataSource = variables.dsService.getDataSource ();
  variables.dbConnection = variables.dataSource.getConnection ();
  
  variables.dbConnection.close ();

• Target iscsi ESXI 5.0, active path connected, mounted, are not not in the data store data store

  HI -.

  I am looking for help to point me in the right direction.  This problem occurred after a reboot of the system.

  I'm in vmware esxi essentials 5.0.0 821926

  I use the starwind software as my iSCSI target

  I use ISCSI to connect to my server from storage to the esxi hosts.

  I have 2 warehouses of data showing inactive under clusters of data storage and the data store.  I have a third-party data store on the same server that is loading properly.

  I currently have the same behavior on three esxi hosts:

  under configuration - storage adapters is the ISCSI path is active. Data warehouses appear under devices and mounted.  In data warehouses, they are inactive. On the same storage server

  on the starwind Server - I have

  built a new target

  removed and added the databases to the new target

  Changed the IP address of the target.

  On Esxi hosts, I removed the ISCSI server, discover places BOF dynamic and static and added under the same or IPs news discovery

  I can restart esxi hosts & storage servers and get to that same point.

  Whenever I find myself in the same place - course assets, devices mounted, inactive in data warehouses

  I don't know what else to share, let me know what you need to know to help out me.

  Thank you

  Dylan

  OK, incase someone crosses my ramblings, it may help.  My original question was warehouses of data that would not rise.  They were visible as devices in the area of storage under devices and as devices in the scsi adapter.

  When I would try to force mount them, add storage, keep the signature, mount they wouldn't mount.  I did some research and my question was after a failed mount attempt strength as got data attached as snapshots warehouses.  I then mounted force them and he tells will data warehouses and I got them back.

  I followed this KB to identify and resolve the problem

  manipulation of vSphere detected as snapshot LUN LUN (1011387)

  When it was over, I tried to add vms back and found a new show.  Power of vms would expire.  the vmkernel.log showed;

  2014 05-27 T 07: 20:40.010Z [verbose 'Vmsvc' 564D7B90] Vmsvc: filtering Vms: ignored not ready to request power state vm vim. VirtualMachine:75

  AND

  (2014 05-27 T 03: 45:47.821Z cpu4:2052) NMP: nmp_PathDetermineFailure:2084: SCSI cmd RESERVE failed on the vmhba35:C0:T1:L0 path, booking on eui.cff548d1952b1e4c of device status is unknown.

  I had latency huge read write showing upwards, 3K and more

  After several searches, I had in the ESXShell and found that there is no conflict of booking.

  On a whim, I took inventory all virtual machines that are now inaccessible.  I then added a DOS virtual machine. Alto! the latency down to version 1.2 a.7 ms for all data warehouses.

  ultimately the instructions said you may need to add virtual machines in the inventory, but does not remove all virtual machines first.  I was grabbing vms that were not in stock, so I didn't remove the old virtual machines in the inventory.

  A recruit Mennonites, Yes.

• Failed to connect to the data source of the network

  My access.mdb is located in the folder of public sharing of server1 (everyone has the right to change or remove) and I try to connect my access.mdb to my cold fusion Server (windows 2003 r2 std). It works if I put the mdb locally, but not network.
  
  I got this error
  
  Connection verification failed for data source: cfmydata
  com.inzoom.adojni.ComException: a file name not valid.
  The root cause was that: com.inzoom.adojni.ComException: invalid not a file name. in the Microsoft JET Database Engine = 0 code Type = 1
  
  The coldfusion service runs under the administrator user and the password. I used the UNC path, but still no luck.
  
  Someone has an idea for me.

  I thought about it. Well, not really. I've used ACCESS with Unicode. Once I changed to ACCESS only. The connection is successfully verified.

  Thank you for all your help paross1

• Can not connect to Twitter on Firefox, but the connection works in other browsers and Firefox on other computers?

  I contacted the support of Twitter on this subject, and so far they are puzzled. Firefox is my favorite browser. I tried to clear my cache and always clear my cookies, but the connection does not work. I also experimented with http:// or https:// to connect, but it still will not connect me. Here is a screenshot of the problem:

  http://www.screenr.com/tkM8

  Make sure your settings for cookies in the preferences > privacy allow twitter.com create new cookies & that it is not blocked by the LeechBlock extension you have installed

• Report Builder 1.0 will not connect to the data source for Reporting SERVICES

  We have a few users who are unable to connect to SSRS on SQL Server 2008 using the Report Builder version 1.0

  (We will be updating soon, but it's a slow process, and now users have questions)

  Instead of disputed for their IDs, they are requested to select a data source.  This information is supposed to be filled automatically when the user starts the Reporting SERVICES report designer.

  Does anyone know where/how SSRS communicates information to start the application with one click Report Builder, and where, if anywhere, it stores?

  Hello

  The following forum seems most appropriate for your question:

  https://social.msdn.Microsoft.com/forums/en-us/home?Forum=sqlreportingservices

  You can get a faster response there.

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• When I start my computer, I connect by entering my password but the screen shows just the loading circle until I have turn off the power and turn the computer back on

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  Wen I turn on, I can point to enter my password. I entered my password and the screen displays a symbol of shooting and seems to expect something to go. The mouse does not work and none of the keys work. I have WIFI in my house, but the system looks like it's waiting to connect. I waited for more than 10 minutes. The only thing I can do is press and hold the switch down for a few seconds until there is a power down. I then power back up and get my password again. I between it and the system is in place OK. It happens all the time. It all started about 2 weeks ago. I have not loaded all the apps since it worked normally. Also, if I am growing up and running and I doi a stop with a reboot, the system comes down and restarts and arrives at the passwword. Enter the password and I have hung up again.

  Hi Greg,.

  ·         Have you checked the problem in safe mode?

  ·         What version of Windows operating system is installed on the computer?

  Try the following.

  Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.

  Start your computer in safe mode

  Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Get the data source connection no security

  Hello
  
  I have problem with connection get weblogic datasoource as follows:
  1. I created 1 datasource in Weblogic 10.3, named ds1
  2. in the Java code get connection
  Hashtable env = new Hashtable();
  WebLogic Server 10.x connection details
  env.put (Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
  env.put (Context.PROVIDER_URL, "t3: / / my_ip:7001" "");
  
  Context ic = new InitialContext (env);
  DataSource = (DataSource) ic.lookup ("ds1") data source.
  Connection connection = dataSource.getConnection ();
  3. from the connection, I can do anything = > every hacker is quite possible acctack?
  
  It is the Weblogic security problem?
  
  I don't understand why? Someone please explain to me
  
  Published by: fbg on October 18, 2010 20:12

  Hello

  Please see the following Post: http://weblogic-wonders.com/weblogic/2010/06/12/binding-objects-in-weblogic-servers-jndi-tree/

  Re: Big Time BUG: WebLogic 10.3 someone can it Crash. Beware! And a way to prevent it. You must secure the JNDI tree as suggested by Faisal Khan in the link above of Forums.

  Recommended for your configuration to get the JNDI tree under one first thing: http://weblogic-wonders.com/weblogic/2010/06/14/securing-the-jndi-with-admin-role-in-11g/
  .
  .
  Thank you
  Jay SenSharma
  http://WebLogic-wonders.com (wonders are here)

• Said Dell Inspiron 7537 is tested on Windows 10 but the upgrade fails - black screen

  Hello all, Hello support,

  Dell Backup software and restore proposed to me that I have upgraded to Windows 10. I like this idea.

  I checked my ultrabook on the DELL Web site. Inspiron 7537 is tested (proudly said Dell) so I should be able to update my OS without flaw.

  I did 2 upgrade to Windows 10 attempts, both failed in the same way.

  It passes through several stages, but at some point, a black screen stuck and only power OFF button turns the laptop computer do something (disable). In the two attempts after 2 restarts, the installation process is back from my Windows 8.1 operating system

  Why DELL say it is tested and I can't upgrade - turns-does not work.

  I have not contacted the DELL forums on this subject (because the DELL technical support in my country told me it is Microsoft Business) If IT WAS NOT for THE FACT that DELL 'advertising' me Windows 10 and claims my laptop is ready to do the upgrade.

  Please help and explain.

  Thank you in advance.

  Martin

  Update your UEFI BIOS to revision A13 and then try again:

  http://downloads.Dell.com/FOLDER03073347M/1/7537A13.exe

• My iCloud storage said I have only 1.3 GB of available, but my backups phone says only that it uses 1.6 GB and my photo library using 1.2 GB and my mail read 176 MB iCloud. Why my available storage is a little more than 2 GB?

  

  Hi FunkyPanda007,

  I understand that you are concerned about your use of storage iCloud. I know it's important to make the most of the space available, so I'm happy to provide advice to help.

  It is important to note that some applications can use iCloud for synchronization of the data on your device as well. This is not reflected in the screen, you are on, which may explain the differences you see. You can see more info on your iCloud here storage utilization:

  Get help using iCloud - Support Apple storage

  Thank you for using communities of Apple Support, cheers!

• I am connected to the WLan, but none of the Web pages cannot be accessed

  Hello

  Radio has stopped working on my laptop.
  It will connect to multiple wireless networks but no web pages cannot be displayed and msn doesn't work.

  When connected to the internet works fine. The wireless is turned on.

  Any ideas?

  Thank you
  Heather

  Hello

  There are many discussions in the forum about wireless setup, but you can start with this microsoft document to reconfigure the wireless network:
  [http://www.microsoft.com/athome/moredone/wirelesssetup.mspx]

  I also suggest to search for "Wireless Setup" on some search engines since there are many many documents there where is described how to solve these problems without wire.

  Also, it would be nice if you tell us what kind of machine you have, what operating system is installed (Windows XP or Vista), what router you're using, etc...

  Good bye

• Satellite U400 - can connect but the web pages are not displayed

  I have Toshiba Satellite U400 with Vista. I can't access the internet via the wireless network in my home.

  My computer connects with the network and the signal is excellent but Internet explorer is never able to display the web page. I followed the instructions to diagnose connection problems. I reset the network connection Windows network adapter, as suggested. He said while there still seems to be a problem with your connection, he tried a repair but the problem persists. He cannot communicate with the first DNS Server (212.77.192.59).

  My colleagues can access the internet with their computer, and I had no problem recently with connecting to other wireless networks in cafes and hotels.
  Can anyone help?

  Have you tried another browser like Firefox or have you only tried only Internet Explorer?

  You have DHCP or a static IP address? If you have DHCP make you you get the DNS server address automatically.
  If you have a static IP address, you must change the DNS address.

  In addition, you should try to update the driver for your laptop WiFi. See the Toshiba WLAN portal for an update:
  http://APS2.toshiba-tro.de/WLAN/

• How to import from an Oracle data source using the Administration tool?

  Trying to create a repository using the tool of Administration and elected to import using the "SPOUT 10 g / 11 g.
  However, after you have entered the name of Data Source, the user name and password, I still get error "the connection failed".
  
  According to the help, the data source name must be the full connection string. I guess that means in the format < host >: < port >: < service >. Also, I guess the username and password are the DB schema.
  
  Any ideas why I can't connect?

  Jin

  I tried the tnsnames.ora road, but it still doesn't work. I created a file tnsnames.ora in \Oracle_BI1\network\admin. Is this correct?

  Yes

  Try to ping your tnsnames command prompt

  tnsping service_name

  I'm assuming that I don't need an installation of the Oracle client on the same PC I have (Windows) Oracle BI 11g installed on. Is this correct?

  on which box you are trying to import tables? Client Oracle installed box or not? .If not you put tns entries in your Inbox

  Thank you
  saichand.v

• Data source connection problem

  
  Hi, im starting to get into Coldfusion and im trying to connect to a database, but when I do the data source and submit it it times out.
  
  I tried to go to the main page of data sources and the database verifies showup but when I click on the little button it tells me there' are was a mistake. It is said:
  
  "Connection verification failed for data source: Teacloud.
  java.sql.SQLException: [Macromedia] [SequeLink JDBC Driver] [SequeLink Server] the data source specified is not defined.
  The root cause was that: java.sql.SQLException: [Macromedia] [SequeLink JDBC Driver] [SequeLink Server] the data source specified is not defined. »
  
  don't know what that means. Can anyone help?
  
  Thank you
  
  kaco-

  If you try to connect using ODBC Socket, this technical Note should help:

  http://www.Adobe.com/go/tn_18644

  Make sure you use the correct driver and have all the required information entered correctly under Advanced settings.