Said PC Diagnostic tool - network fails

I ran the Diagnostic PC tool and I got the error in 'Network' and reported as FAILURE.

I don't know how to fix or diagnose the problem.

It is with the network driver?

Thank you

What's the problem exactly?
Is there a specific reason to use the PC Diagnostic tool?
Problems with LAN or WLAn?

Tags: Toshiba

Similar Questions

  • PC Diagnostic in my Satellite C660 tool shows FAIL to HARD drive

    When I run the PC Diagnostic tool in my Satellite C660 it shows the result as "FAILURE" for the hard drive.
    Is there a problem with the hard drive?

    Post edited by: Sammy007

    > When I start the PC Diagnostic tool in my satellite c660 it shows the result as "FAILURE" for the hard drive. Is there a problem with the hard drive?

    He said nothing, I mean diagnostic tool Pc can can show result falsely and the drive works very well himself. In any case, backup all data in case of failure. You can also download the 3rd party program to test the State of the hard drive. (such as hard drive Inspector)

  • The hardware diagnostic tool advises that the SMART short self-test has failed.

    The hardware diagnostic tool advises that the SMART short self-test has failed.

    Is this a problem? What can I do about it?

    Atelier42 wrote: the hardware diagnostic tool advises that SMART short self test failed.

    Is this a problem? What can I do about it?

    Hello Atelier42, this usually indicates that you have a hard disk failure.

    I would like to back up my data as soon as possible, just in case the hard drive breaks down actually.

    You must also make sure that you have the HP Recovery restore set for your system recovery disc in case you do not want to replace the hard drive.

    With this restore HP Recovery disk set, you could replace a defective hard drive and use this disk set to your HP system back as it was when shipped. Then, you could put your data saved on your system.

  • PC Diagnostic tool indicates problem with WiFi - Satellite Pro A100

    Hey all

    Im having some problems trying to connect with my laptop wifi computers.

    Ran tool Diagnostic PC (toshiba) and the result said network fails but gave me no help to identify or reapiring problem.

    If anyone can help?

    Satelittle Pro A100
    Win XP
    512 MB of ram
    HARD DRIVE 60 GB
    ATI Radeon X 1400

    Malc

    Hello

    I put t know what problem you have, but check the status of the WIFI card in Device Manager. After this check, if the card is correctly enabled or disabled. If the map is successfully activated the laptop should be able to see WLAN network. If this isn't the case, I assume that there is a problem with the wireless network card.

    If you want to report us more on your problem.

    Good bye

  • Pro K550 Diagnostic tool

    Hello

    I installed HPHDU (diagnostic tool) for my printer HP Office jet Pro K550 and itsnot work.

    First step is ok, said tt its connected, but the second stage with the error (step 2-the State), it says error 06.  I tried to reconnect the cable, reset the printer, PC. Nothing help.

    In the diagnostic tool are 4 pages. On the last page, all data are unavailable except my version of the firmware which is: 6.1.71600.16385

    The printer is ok, I can print any page I want. Just can not do the diagnostic tool to work.

    Thanks for any help

    David

    I don't know what could be causing this issue, but if the device is workinging correctly and that you have any problems, is it necessary to run this software?

    In addition, the image you uplaoded is too small for me to identify what stage the HDU fails on, and you can translate it for me?

    Let me know!

  • Diagnostic tool hardware problems on Satellite has detected memory

    Diagnostic tool memory detected in my laptop hardware problems. Now I don't know what part of the hardware's fault.

    Whenever I start my laptop after shoutting it down for some time, it appears failed early and repair takes place and start using the system restore that will come back at some point.

    Is that what this has to do anything with overheating?
    Please help me immediately

    > Diagnostic memory tool detected hardware problems in my laptop. Now I don't know what part of the hardware's fault.

    I would assume memory one or two failures of modules.
    I recommend you to check them both.

    Remove a module and try to use the laptop with a connected module.
    Then another module test. Make it as different memory locations.

    If two modules are corrupt, then you will need to replace both.

  • Directed here to find a diagnostic tool of performance cooling for my X 205.

    Hello

    I was looking for a software to monitor and control the fans in my X 205. I have an overheating problem when the games. The vents are clear, and I opened the case and he cleaned. The ventilation openings are not blocked. This problem occurred recently. I assumed it was a problem with XP get corrupted, so I reinstalled XP Pro. This did not help. The fan itself works, as I ran it on 5 volts when I opened the file. No problems. He justy lights when the GPU gets hot (75 degrees Celsius).

    A laptop forum referred me to this site and said: I'm looking for a utility called 'Cooling Performance Diagnostic tool', but I can't find anything.

    Anyone know where I can download this utility? I need to monitor and control these fans. I reinstalled the drivers from the Toshiba site and system Toshiba Utilities, but the fan does not seem to be controlled.

    Anyone got any opinions on this one?

    See you soon,.

    Rob

    As far as I know these tools does not exist.
    Maybe someone told you to check in Toshiba power saver settings for cooling method option.

    In any case, I assume you have the laptop model US so I have to redirect you once again. ;)
    Check Toshiba support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp US and look for information on all available tools and utilities.
    You can also visit the forum there, and chat with people who have models of laptop computers in the United States.
    On this page we are discussing in most cases on the European models and the support of Europe.

  • Virus in the diagnostic tools on Office file

    Recently, I noticed that my pc guards came and said I had a virus, I did a full scan and it said: I had some viruses, two were in the files and I deleted them, they were related to my norton files because my norton was obsolete, since I installed norton antivirus and it does not pick up my problem.

    On my desk in my toshiba in my diagnostic tool files, one of the files has the virus as my bodyguard of the pc tells me that I opened the page, it's in my files\toshiba\pc cd rom file test.exe diag program don't know if I can delete it will do damage?

    If I can't return the file somehow?
    I think I deleted the file just above her too, as he had the same problem, and cannot test that now that there is no file, help needed please, what would u?

    Hello

    Usually, you can use the System Restore tool to roll back the OS to the beginning.

    But you should always update the antivirus applications as an anti-virus software that are not updated will not help you remove all viruses and will not protect against any virus attack.

    I recommend using additional programs like adware and antispy.

  • I hear the ticking in the hard drive, but diagnostic tool (S.M.A.R.T) says his health.

    Pavilion p6010in Desktop for 3 years using (product number: NC875AA #ACJ), for a few months, I hear the ticking in my hard drive, I suspect that it is its failure of hard drive, but my diagnostic tool (SMART) explains his good health.

    Sound indicates a problem. I also use Ubuntu 12.04 with vista (even ubuntu says that the disc is in good health).

    I'm confused why the sound is similar to a click of death as seen in the link (my hard drive Seagate Barracuda 500 GB) below

    Seagate desktop with heads of default drive get stolen, then clicking sound.

    Please tell me what I should do now. I also Plan to upgrade to Windows 8 (I won't use Ubuntu anymore).

    I suggest you replace your hard drive before the upgrade to avoid all these problems. The new hard drive should be the same size or larger that one you have for the recovery discs to work properly. Install Windows 8 on the new hard drive.

    Once Windows 8 has been installed successfully make a new set of recovery disc for Windows 8 so that if everything fails, you can the recovery disc restores on Windows 8.

  • took a diagnostic tool for this site and it says cd/dvd cannot be read / burn

    Toshiba c660/c660d.i tried to burn a disc for the first time in fourteen months, burner is not not detected.cant read disc.windows empty just continues to put some cant read messge up.when I do a burn list and click on burn I wonder burner, choose a white premiere.1 ran a diagnostic tool for the site and it said unable to read dvd/cd burnt.the this burner in my computer.i can read music on the cd and a ran.just of film does not burn.

    Hello

    1 have had any changes made on the computer before the show?

    2. what operating system is installed on the computer?

    3. What is the full and exact error message?

    I suggest to see the link and try to run the fix it:

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    If the problem is not resolved, please provide more information to help you best.

  • What is 5.1.4861.15 hardware diagnostic tools

    What is 5.1.4861.15 hardware diagnostic tools

    Hi Floyd,

    If I am right, it is actually PC-doctor, Inc. Hardware Diagnostic tool which is distributed by some computer program of PC Doctor OEM manufacturers.  The number seems to be a somewhat older version (possibly published with XP systems).  They still do and I have versions for XP, Vista and even Windows 7. If you have upgraded your operating system, the program may or may not work more.  It doesn't seem to be something that you can buy directly (and I don't think that it can be upgraded) - but your computer manufacturer might be able to say more about it.

    Here is the current information on Program OEM's PC Doctor: http://www.pc-doctor.com/pcd_windows.php.  I know that HP and Compaq and Acer and Fujitsu used and can still - and I saw obsolete links and now gone listed this specific version of the program on their systems - but none of their websites discuss the version even if some do not discuss the existence of a program of diagnostics of equipment and how to use it.  Here is an example: If the computer is running XP so that it looks like this (unfortunately not a download link, just info): tests for hardware problems using PC-Doctor - HP Customer Care (United States - English).

    I don't think that it is malware - if I'm wrong.  If your manufacturer says that it was never installed on your computer, so I guess it's possible, but I found only about above it and no mention of all malware related.  In any case, if it was never installed on the system by the manufacturer, then I would probably not use it and may even consider uninstalling just to be on the safe side.  If it has been installed by the manufacturer, try running it to see if it provides you with hardware diagnostic information.  If it crashes or fails to run if you have an operating system upgraded from the original installed OS, then it is probably not compatible and I would just uninstall it as it will be of no use and cannot be upgraded (unless the manufacturer provides one, but it is unlikely) and is just too much room.

    Yet, it can't hurt to run some checks for malicious programs.  Update and run a scan complete with your current AV program.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If they are all come clean and do not show this as a problem, then I would say it is more likely is not malware and don't worry in this regard.

    I hope this helps.

    Good luck!

  • Where can I get an access code for Microsoft's Diagnostic tool?

    original title: msdt passkey

    I downloaded Microsoft's Diagnostic tool, but need a "pass key" to launch.

    He said that Microsoft Support would provide the key, but I see no place to get or
    demand.

    Any help will be greatly appreciated... Thank you.

    GEO.

    Hello

    you have a retail or OEM of Vista version?

    read this:

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-Microsoft-support-diagnostic-tool

    Note

    If your version of Windows installed on your computer, contact your computer manufacturer. You can find information to support manufacturer for your computer on the help and Support home page. To view this page, click the button start , and then click Help and Support.

  • Re install Realtek NIC Diagnostic tool

    How to re install the Realtek NETWORK card Diagnostic tool after upgrading Vista to Windows 7 32 bit?

    Hello

    Thank you for the update.

    However, did you uninstall any anti-virus installed in the system?

    Firewall (if Windows or third party) prevent network connections and/or sometimes block installation of the driver or result in a corrupted installation. So, which makes important steps to uninstall the security software (installed everything in the system is) with his removal tool to check if the question is reproduced in a free antivirus system.

    To know the different third-party security software removal tools, I'll have the thread below link:

    http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/list-of-anti-malware-product-removal-tools/407bf6da-C05D-4546-8788-0aa4c25a1f91

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

    After back with your results, we will be happy to help you further.

  • Debugging v1.2 problem Diagnostic tool

    I tried to remove this control center. He said that something was missing. I downloaded the .msi file and tried to reload. A message there was a problem with the Windows Installer Package. Where can I find details on this issue? How can I withdraw if I can try version 2.0?
    I run Windows 7 Professional 64 bit and I'm running the x 64 version.

    Hello Chuck,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    Have you received an error code when you say, "there was a problem with the Windows Installer Package"? If Yes, what is the exact error code?

    Thank you for details on the issue.

    I suggest you run this Microsoft fixit and check if it helps.
    Reference:
    https://support.Microsoft.com/mats/program_install_and_uninstall

    You can also Download Debug Diagnostic Tool v2.0 from this link:
    https://www.Microsoft.com/en-US/Download/details.aspx?ID=40336

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Free HP Print Diagnostic tools

    HP offers several tools to help solve common problems that can occur with printing, scanning and installation.

    The HP print and Scan Doctor is designed to troubleshoot and diagnose printing and scanning problems. This tool replaces the old HP Diagnostic utilities such as: Print utility of diagnosis of HP, HP Scan Diagnostic Utility and the Network Diagnostic Utility HP. Now, with a single download, you can have access to a unique diagnostic utility that includes the benefits of each prior diagnostic utilities.

    The printer HP install wizard for Windows allows users to easily get and install the best driver for their HP printer and operating system.

    Utility HP diagnostic equipment can find and possibly resolve hardware issues with your printer. Here are some examples of what it can diagnose: paper jams, stalls transportation, errors of paper, flashing lights, etc. If the printer is connected via a cable USB HP recommends to install the HP driver prior to running The utility of diagnosis HP Hardware. This is to ensure that you get all the benefits of the utility.

    Follow the link below to locate all the utilities that are described above.

    Find and fix common printer problems using HP Diagnostic tools

    If anyone has trouble using one of the above utilities let me know by making a post below. Also, feel free to post your success stories below.

Maybe you are looking for