Said the existing console session Win7 for Vista holiday PC

When you try to connect from a mobile phone company of windows 7 to a windows vista ultimate desktop I get the error that a console session is already underway. It has worked before.

For any question on Windows 7:

http://social.answers.Microsoft.com/forums/en-us/category/Windows7

Link above is Windows 7 Forum for questions on Windows 7.

Windows 7 questions should be directed to / stationed there.

You are in the Vista Forums.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

    Original title: Windows File Protection Pop Up Message.

    I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

    Hello

    1. have you made any hardware changes or software on the computer before this problem?
    2. when exactly you receive popup?

    Run SFC scans the computer and check.

    SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.
    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command prompt, type the following line and press ENTER:

    sfc/scannow

    Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  • The update of Windows 8 for Vista and XP is gone! Why it has been deleted

    The update of Windows 8 for Vista and XP is gone! Why it has been deleted

    Moved to install Vista, upgrade, and activate Forum.

    http://Support2.Microsoft.com/GP/lifewinfaq

    7. What is the policy of the policy of Support for Windows 8.1?

    Windows 8.1 is part of the same strategy of life cycle of Windows 8 and reaches the end of the main Support on 9 January 2018 and phase end of Support extended on 10 January 2023. With availability General Windows 8.1, customers on Windows 8 2 years, until January 12, 2016, to move to Windows 8.1 to be taken in charge.

    See you soon.

  • Get the error as a broker for Vista stopped working when trying to start the Webex session

    Original title: broker for vista stopped working

    Anyone know what this means?  I get this message every time I try to open a Webex session.   I work under Vista

    Hello

    The question you posted would be better suited in the Cisco Forums. I would recommend posting your query in the Cisco Forum site:

    https://supportforums.Cisco.com/index.jspa

  • Need driver win7 for Vista H233H monitor

    Hello, I just bought a new processor & Win and am having problems with my monitor H233H. During a cold start the monitor not acknowledge a connection with the new CPU until I turn off the power button on the monitor. When the monitor restarts - Acer appears - then it goes directly to my desktop - everything will be good until it lights up my screensaver. Then I have to turn off the monitor again.

    I see the driver site Acer that a Vista OS is listed for this monitor. Is there an another monitor driver that support Win7 I might have better luck with?

    Thank you!

    Solved the problem...

    Bought a new 27 "AOC montor. Pluged into the HDMI and things were Golden. I don't understand why Acer failed to write a new driver code for a monitor that was purchased in 2010 for Win 7?

    Makes me do not want to go back on the road to Acer.

  • Remote Desktop left the unlocked console session after I disconnect, - BAD!

    Often, I connect to my Home PC, Windows XP Pro SP3 running to work.  When I leave the House, the session is locked.

    I recently discovered that when I disconnect from a remote desktop session, the computer is left * unlocked * even if I disconnect the session by locking the PC.

    I'm fairly certain that it wasn't how things behave initially.  This change with SP3?

    Currently, I connect to work with a Windows 7 Pro (64 bit) machine, but there is this problem with my old laptop which ran from XP Pro SP3.

    How can I stay locked to disconnect the console session?

    END THE SESSION IS NOT AN OPTION.  I have user programs that run in the session that must continue to run. I have need of the session is running, but locked.

    Hello

    In my case it was the full client of Teamviewer which is a problem, including a version earlier than 5.1.9385, when I upgraded to this one, the problem disappeared!

    Now there's another question that should be checked, if you Live Mesh Beta (which runs on windows XP and not a new one which has no Vista/7), then there are chances that you have activated the Remote Desktop feature, you can find two devices under the 'View' node in the Device Manager named 'Live Mesh curtain Driver' and 'Live Mesh Mirror Driver. You can turn them off, restart and check if the problem persists.

    A last suggestion if the above could not solve the problem is to update the drivers of network card in your machine.

    I hope this helps.

    George Simos

    Microsoft MVP - System Center Configuration Manager

    MCSE 2003, MCTS, ConfigMgr virtualization

  • When I stopped the computer there are updates for Vista

    Original title:

    Vista updates

    For the last two weeks, every night when I stop there are updates for Vista. What gives?

    Please see the article after some troubleshooting for your question:

    Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339/en-us>

    In addition, you can read the following article and check.

    Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

    http://support.Microsoft.com/kb/906602>

    UTC/GMT is 18:13 on Monday, May 21, 2012

  • Permission to edit/update/copy of Win7 for Vista

    I just got a new PC running Win7 Home Premium 64, and I want to edit files on my server in Vista Home premium 64 SP2. They are connected via a wired network and two machines can see and I can copy files in public directories on each one to the other.

    But I have a problem using existing non-public directories.

    for example 1) I want to create a text on the Win7 machine file and copy it to a directory on the Vista machine.

    or (2) edit a txt, or xls file for example etc on the Vista machine using the Win7 machine.

    When I try 1) I get message "you must" authorized to perform this action on the Win7 machine.

    When I try 2) I can edit the file but cannot save or "save under" except for the public folder on the Vista machine.

    Can someone tell me what I need to apply on the Vista computer to enable me write permission access? or direct me to a simple explanation?

    I tried granting access sharing level and safety with the id of win7 I use, for everyone, authenticated users, etc. to the specific file and directory level, nothing done.

    Thanks for any help.

    Create accounts/passwords user on both machines. Then share on non-public directories (users workstations are good), "Everyone" access. MS - MVP - Elephant Boy computers - don't panic!

  • Tecra M2: Cannot install the Software & Tools from Toshiba for Vista

    Hello
    Properly installed Vista business on a M2 (updated 1 gig RAM) and it works fine. Took me some time to find suitable, Nvidia GO FX5200 driver but everything is good. Unfortunately I'm unable to install one of the tools/software-Eg Toshiba Toshiba Control Panel, free config etc etc.

    There is no compatible software VISTA for M2 provided by Toshiba that I see and while I read a thread indicating a M2 user has successfully installed the tools Toshiba M4, I get an error telling me that I am their installation on the wrong model. Someone knows a way around cela or have any ideas that could help me. Thank you

    Why you do not send a link? I would like to read this announcement.

  • Is there a problem with the latest update of Windows for Vista (January 13, 2016).

    After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

    I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

    What should I do?

    Hello

    Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

    You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

    But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

    You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

    'Remove an update'

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

    "How to hide or show an update of Windows Vista"

    http://www.Vistax64.com/tutorials/72491-Windows-Update.html

    _____________________________________________

    Here's how to change the update settings, if you think it is necessary to:

    "Understanding Windows Update and Extras in Windows Vista and Windows 7.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

    Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

    See you soon.

  • Why the ins does not support for vista? Is that what we write in the script of the ins in support for vista?

    Hi I'm new to nsis. I used nsis to create an installer for all versions of windows, but the problem is that his works well for windows XP, 7 not for windows vista. Is there the thing to mention explicitly in the nsi script?

    Thanks in advance...

    Hello

    Your question of Windows Vista is better suited for the MSDN forums. You can follow the link to your question:
    http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/threads

    It will be useful.

  • How can I fix the USB ports on work for Vista?

    I have Windows Vista basic and USB does not work for all devices when they are plugged in. I get the message "devices connected to the computer USB has malfuctioned and Windows does not. "I also noticed that in the pilot do message"No driver for this device"Port_ #001.Hub_0007 ' if plug all devices including a USB key or a mouse, goed by single power. Any ideas how hard to pull of this problem.  Thanks in advance

    You can try to go to Device Manager and uninstall all the drivers remove all listed (only the hubs and not others) cos of your terminal and restart your computer. After restarting plug your rear hub.

  • How can I disable the automatic installation of updates for Vista?

    HP Pavilion dv2 laptop... Vista

    I use my phone sparingly & almost exclusively in public presentations.  I have recently (in response to a popup) changed the setting so that Windows updates are installed automatically.  Since then I have had 2 thoughts, because I don't want that Windows updates (reboots, etc.) could interfere with some presentation planned (or current).

    Where can I change this setting?

    Thank you

    Hello:

    The info on the link below should be of help to you.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

    Paul

  • I do not have the new GUI Windows Update for Vista

    My friends computer which has Vista: Home Premium SP1 has the new graphical interface of Windows Update.  I have Vista: Home Premium SP2, how do I do not have the new GUI interface?

    -Mike

    :

    Hi Gamemaster406,

    Welcome to Microsoft Windows Vista Forums.

    Until we start trying to solve your problem, please provide additional information, so that we can better help you. Please, give us a brief description of your problem with the computer.

    O how long you have been faced with this problem?

    O that you make changes to the computer recently?

    O are not able to see the latest version of windows you updates?

    Ø you aren't able to see the windows graphical user interface update settings?

    Each computer is different and you could look at the history of the update between the two computers and see if you are missing the other windows updates.

    To learn more information access Windows Update the link below:

    http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

    Hope this information is useful.

    Suresh G

    Support Microsoft Answers

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • sticker on bottom of laptop is faded. can not read the number of product key for Vista

    need a product key to enter because I had to reload everything

    need a product key to enter because I had to reload everything

    Hey kimberlynothis

    If you have already reinstalled vista and you don't know the product key we can not help you

    If you had contacted these forums before you reinstalled vista we helped you with key finder programs

    but as this is a new installation of vista not activated we cannot help you find the product key

    If it is preinstalled, I suggest that you contact the manufacturer of your computer and ask them about recovery disks

    normally, they do not require you to select a product key when you use them to reinstall vista

    you don't say how you reinstalled vista

    Walter, the time zone traveller

Maybe you are looking for

  • The search button does not work

    The button search and google won't work the first time, it takes at least a few minutes of pushing before it works

  • Sleekbook HP Pavilion 15-b114el - lost product key

    Hi, I am the owner of a HP Pavillion Sleekbook. A year ago I bought this laptop in a shopping centre in Italy. Last week, due to a hardware problem, I had to replace the hard drive. During this process, I lost the product key of windows. If possible,

  • Lrt224 direct traffic through ports wan by device

    Hi, is it possible to have all traffic via wan1, but devices that I select (by Mac address or otherwise) go to wan2

  • Downgrade of Z10 10.3.3 to 10.3.2 blackBerry does not... Please help

    Dear all, I installed OS 10.3.3.746 on z10 and want to go back to 10.3.2 or any other version. I tried several files of ADF, but none worked. When the installation ends and begins it devices, it stops at "Blackberry"... I tried to reload the OS vi BB

  • unclosed popup stay open on page load

    Dear all,JDEV version is 11.1.1.7We are facing a strange behavior (as I know).We popup opened during the processing of some input on jsff data.This popup isn't closed yet.now, we hit the url of the page in your browser window.We see the popup stays o