Said updated stand-alone Windows Setup program do not apply to this system.

Similar Questions

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• Cannot install KB980182 + 17 other updates - error 0x8007371c or "does not apply to this system".

  I am running Vista Home Premium with Service Pack 2, 32-bit. For example, I have the 8.0.6001.18828 version. I use AVAST AV and Comodo Firewall. I've never had McAfee.

  I have 18 'Important' Windows Vista updates will not be installed: several updates, several windows Vista updates, etc. Back to 08/12/09 and 27/04/10 the most recent. They start to add up. Here is a screenshot of them:

  http://img94.imageshack.us/img94/5003/updatesl.PNG

  For about 11 of them, let's say in the meantime (until restarted), but then after the resumption, that they do not have to install but have no error code. The event viewer indicates that they are 'not applicable for this system' (then why they have been downloaded?). Who does not apply are: KB905866 KB971468, KB972270 KB979683 KB978601, KB977816, KB978338, KB979099, KB974318, KB980248, KB980232.

  The rest of them, as (for example, KB980182) will fail because of an error of 8007371 C. In Event Viewer, they all have a sequence of error similar to this one (it's for KB980182):

  ###

  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-39_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-38_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-37_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
  11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
  11:10 - Windows Servicing has not completed the process of change update 980182-2_neutral_GDR of packaging KB980182 (Update) in Staged (Staged) State
  ...
  [several other of these errors, with '2' to 36, even numbers only]
  ...
  11:11 - Installation failure: Windows failed to install the following update with error 0x8007371c: Cumulative security update for Internet Explorer 8 for Windows Vista (KB980182).

  ###

  Things I've tried:

  1. installation after a clean boot - at first, seems to be successful that I can get the list to the left of 1 or 2, but at some point given shortly after they all reappear.

  2A ran the System File Checker that comes up: "Windows Resource Protection has not found any breach of integrity."

  3 reset Windows Update components (manually or with the "FixIt" solution to http://support.microsoft.com/default.aspx/kb/971058?p=1)

  4. stop of services related to Windows Update, rename system folders, saving and then associated DLL files by restarting services (as described here: http://social.answers.microsoft.com/Forums/en/vistainstall/thread/ed275467-5580-41dc-9ccc-3c1e22c6fd28)-same result

  5 install in safe mode - gives me "Setup has encountered an error: 0x8007043c.» This service cannot be started in safe mode. »)

  6. scan the hard disk for errors (e.g., check disc) - Nothing found

  7. search for viruses, Trojans and malware - do not have

  8. install with UAC, anti-virus and firewall off the coast - same result

  9 install the upgrade preparation tool system for Windows Vista (KB947821) [January 2010] (with UAC, AV, etc off), but the installation 'failed' (no error code). Installation in safe mode it gives me the «...» "0x8007043c. this service cannot be started in safe mode."

  10. manually install them - same result

  A short circuit contact MS have exhausted the options?

  Thank you. This is not a beta or Release Candidate build both fuhgeddaboutit and open a free support incident.

  PS: I think you will find that the updates are not installed due to infection hijackware, Kurt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The Windows Setup program does not open. Stuck with black screen.

  Hi all

  I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."

  I have reset the NVRAM (command + alt + p + r) which did nothing.

  I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.

  The forum has a lot of "black screen problems" but none of their solutions worked for me.

  Any help would be greatly appreciated!

  Thank you

  1. leave BCA creates the installer from USB, but not to partition your drive.

  2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.

  3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.

• the Windows Setup program does not work after restoring

  Since I restored my system, when I try to open excel or word, I get a windows install. Even after installing windows install 4.5. How can I get excel and word to work?

  Hello

  1. could you give us the exact error message?
  2. do you get this error only when you use Excel?

  Method 1.
  I recommend you to reregister the Installer engine.
  Here's how:
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver

  
  Method 2.
  

  It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• The Windows Setup program does not start

  I'm trying to install 10 windows using boot camp. I'm on a macbook pro retina early 2015 on OSX 10.11.2

  I opened the boot camp assistant and it brings me to a screen to select the ISO and partition my drive.

  After I choose how I want to partition my drive, it brings me to a screen where it downloads windows supported, copies of windows install files and restarts.

  At this point, I expect 10 to start windows installer, however it brings me right to the normal sequence of boot OSX. I tried now option when it is booting, but I only see the OSX disk to start. Then, I go to bootcamp again and it gives me the ability to delete my bootcamp partition. I checked in disk utility, and it seems that the drive is partitioned in fact, but I can't get the windows installer to run and install windows on the new partition.

  I was wondering if anyone had questions similar to this.

  Thank you!

  Please perform the following two procedures...

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you have any external storage connected, unplug it during the installation process. New attempt of BCA. You will need to remove the previous partition, and start all over again.

• Windows XP-windows setup program does not work

  My windows installer does not work. Have a new Kodak printer/scanner/copier and can't get installed it without windows installer. What should I do?

  Hi dcapouch,

  What is the error message that you receive?
  Also provide error code, as applicable.

  Is this error message only when you install the printer?

  Check if the install Windows service is set to automatic. Steps to follow:

  a. Click Start and type services.msc in the search box

  b. Locate the Windows Installer service

  c. right-click on the service

  d. If the service is stopped and then starts the service

  e. to start the service, right-click on the windows installer and select Properties

  f. and in startup type, select automatic

  g. now try to install and check if that helps.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB973687___This update an update has failed, and when I tried to reinstall it from Microsoft Download site, it said that this update does not apply to this system.

  Update for Windows Vista (KB973687)

  Installation date: 26/11/2009 23:14

  Installation status: failed

  Error details: Code 80070026

  Update type: Important

  Install this update to prevent applications from sending too many requests HTTP, while a well-known Document Type Definition (DTD) is included. After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/973687

  Help and Support:
  http://support.Microsoft.com

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• The Windows Update stand-alone Installer returns an error: "update does not apply to your system.

  Preparation of my laptop running windows Vista Business SP2 to upgrade to Windows 7; Downloaded Windows Easy Transfer for Windows Vista to Win 7 32 bit format. run the download and the "Windows Update Standalone Installer" then begins poster "the update does not apply to your system"

  Have you tried several downloads, including the 64-bit version (I checked that my system is actually 32-bit); logged on as Admin; tried to change the security settings for file - no change in this inability to install.

  Ideas?

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1B544E90-7659-4BD9-9E51-2497C146AF15&displaylang=en

  Download and run the Windows 7 Upgrade Advisor to see if your PC is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I fix windows 8 update stand-alone Installer error: 0 x 80096002

  I try to install Magix rescue your videotapes 6 on windows software 8, the program works fine but when I try to install the USB videowandler I get the error code: 0 x 80096002 under the screen saying the message signer certificate is not valid or cannot be found. The properties of the device say it works very well and all the drivers are updated and installed, but the program will not recognize and allow me to transfer video. any ideas?

  Point to the driver files.

  Right-click on the configuration file, and then click "troubleshoot compatibility".

  Wait, it detects the problem.

  Click on the option "worked in an earlier version of Windows.

  Select Windows 7 RTM or better Windows Vista SP2

  Click next

  Click Start the program, wait, it installs

  When the installation is complete, click Finish and save the settings.

• I run the stand-alone windows installer to thr and displays the error code 0 x 80240009

  When I ran the windows update stand-alone installation, it updated kb947821 hotfix, but after he would not install updates

  0 x 80240009

  WU_E_OPERATIONINPROGRESS

  Another operation in conflict was underway. Some operations such as the installation cannot be performed twice at the same time.

  Restart and try again.

• Win 7, stand-alone windows installer does not install the msu downloaded on my HD files.

  I have several MSU files that I downloaded on my computer.

  I click on them and the stand-alone windows installer goes into "searching for updates on this computer".

  2 hours later, still nothing.

  I know that people have problems with the update of win 7... Nothing works.

  So far is just sitting there looking for updates... He ran all night... Nothing... always to research.

  I can not find where Microsoft puts the installed update files... If the software distribution folder, which wiped out during one of my attempts to resolve this problem.

  windows update told me today there were new updates available, and then sit there for 6 hours trying to get them with no result...

  So if I can't even manually install MSU file, what can I do? Try to install the kb3102810 fix

  You can use internet explore and access the catalog M$ and bring the two,.

  That is to say a right click and run as administrator

  

  Then go to the catalog and the top search right for each update and allows them to basket

  http://catalog.update.Microsoft.com/v7/site/install.aspx

• How can I get Web sites to open in the stand-alone windows instead of all stacked in a single window?

  If I have a window open and click a link to open another, they pile up in one window instead of opening a new stand-alone window. How can I change this?

  Open options
  Tabs
  Top box uncheck the box which

• Export security settings local to a stand-alone Windows 2008 server in html format

  Can I know how much is possible to export the local security settings (including local policies, event log, models of administration) to a stand-alone Windows 2008 Server to a single file (for example, html or txt)?

  I know that "gpresult" can do, but it works only on member servers. Can we capture output similar to a server that is not joined to the domain?

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• ERROR: This Setup program does not support installation on a 64-bit Windows

  I just bought the first items 14 and trided to install it, but got: "ERROR: this Setup program does not support installation on a 64-bit Windows operating system." Please download the 64-bit version of first Elements". So, I know that I must have downloaded the wrong version. (We are still in 1995, I thought that these applications have been more intelligent these days...) SO, how can I do now? Is it possible to download the right version and use the same license number? Need help how to proceed!

  You can download the 64-bit link version:

  Download first Elements | 10, 12, 14, 11, 13