Sales tunnel real false deal structure

Similar Questions

• table to the spell to deal structure

  Hi all

  I have a table of 3 elements with numbers.  I would like to turn this table in hex and use it to select in which case my case structure uses.  For example, the table is 11, 2, 3.  I want to turn into B23 and B23 would be one of my case.  I'm trying to implement with as little code as possible.  Thank you!

  Yik

  You have not said if you wanted a number or a string, or if it had to be scalable, but here's another possibility using strings:

  

• Realization of case Structure

  Hello

  I am currently implementing a paperwork on the ECG signal noise reduction. But I don't understand the part of deal structure in the block diagram. I need to know to the FALSE State. I need an explanation on this to find out the REAL State. Please help me explain this state of the structure. Thank you.

  Antu.

  

  Watch your photo, it is that when there is an error generating the FIR filter coefficients simulated signal flows through the same box structure.  My guess is that when there is no error generating the coefficients (error code = 0) the simulated signal is filtered using DDT even-> DBL conversion followed by FIR.vi the range of Signal Processing.

• Xilinx Compilation error: Formal HDLCompiler:432 < eiosignal > has no real or default value

  Hello

  I've compiled several programs for sbRIOs previously but did not run in before compile errors. I can't find any support to see what is actually wrong. Any help with this would be appreciated!

  The summary of the situation of the Compilation is:

  LabVIEW FPGA: Compilation failed due to an error of xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 87: Formal has no real or default value.
  INFO: TclTasksC:1850 - enforcement process: synthesize - XST is made.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000032_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 106: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000033_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 125: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000034_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", Line 144: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000035_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 163: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000036_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 182: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000037_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", line 201: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000038_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" at line 220: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000039_CustomNode.vhd", line 18. eiosignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 50: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd ignored errors

  -->

  Total memory use is 189944 kilobytes

  Number of errors: 9 (0 filtered)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  I had similar errors (not real or by default) then compile using the code LV would not remove, but the compiler Xilinx would be due to determine it was unused.  It is usually inaccessible code with a register read in the main loop, but write it to enroll in a deal structure that would not be executed.  Differences in the ability of the LV compiler or compiler of Xilinx to decide what is safe to delete this could lead.

  Other times we had errors when a clock has been specified in the file of constraints, but the clock was not used.

  Maybe one of these two seemingly unrelated points might help.

  Shane.

• Logic of case structure

  It's hard to explain, so I'll try to be very clear.

  I have a true/false case structure in a loop and in both the true and false cases there is an another true false structure case (so there are 2 inner 1 under fake business structures and 1 under the true of the external structure of the housing.

  I'm trying to figure out how I can do so when the external structure of case changes from true to false (with button) then the internal structure of the case is true for an iteration of the loop, but then he turned to false and is false. Then, when I change from false to true structure internal matter under real of the structure of external box does the same thing. (stays once then true false the rest) If the external enclosure structure changes again I want what it do it again... True for an iteration then false until the external enclosure structure changes again.

  I hope that makes sense.

  Hello.

  Take a look at the example, let's see if it helps you.

  Dani

• Structure of the case duplicates all the indicators on the user interface.

  I create a true/false case structure that contains several indicators for each of the cases respectively.  These indicators are displayed simultaneously on the user interface.  Is there a way to have indicators or indicators to replace the other as the other case is active or control must be in the user interface at the same time?

  Thank you!

  Is there a reason you want to duplicate the indicators?  The normal practice is to move the indicators outside the structure of the case and the wire coming from each case out through a tunnel.

• Greetings from display in the indicator chain for some a time real (timestamp)

  I need help for display of greetings

  "good morning".

  • After 12:00
  • before 12:00

  "good afternoon".

  • After 12:00
  • Before 18:00

  "Good evening".

  • After 18:00
  • Before 12:00

  I have attached my program so far for the real-time display

  With the help of the hour off the time stamp for driving a deal structure.

  

• Problem with several sub-groups through case structure Enum: 'the VI isn't in a State compatible with this operation.

  Hello

  I'm using LabVIEW 8.0 and I'm trying to create a subgroup of experts which shows the façade of a subvi according to the choice made by the user via the menu drop down Enum.  I wired the Enum to a case structure and apply a coding identical to each structure of individual cases with the exception of course change the source of sub - vi.  However, you receive an error "The VI isn't in a State compatible with this operation."  I have managed to make a single sub - vi work within a subgroup of experts using a true/false case structure and the same exact coding.  However, now that I use an Enum box connected to a structure of the case, I get this error.  I enclose my diagram as well.  Could someone help me as to where it is that I am wrong?

  Thanks in advance!

  If your VI runs already, when you try to run it? Which returns the error you get.

  Check the State of VI before trying to run or make an error handling.

• Register to offset or solid square tunnel and DAQ support

  Hello

  There is little doubt, but I want to clarify here.

  I have a Subvi and I use it in my main VI.  Subvi is written with state machines and have up to 6 different States. In one State, I have a comparison function that must value a value to a terminal for the purposes of comparison. This value is constant and I always change. Currently, I pass these values to the Subvi my main VI. Moreover, I do not use any kind of change to go through the tunnel square rather just solid. The Subvi is continuous on its States when it runs. My doubt is the value which I send VI is still exist at the Terminal comparison Subvi or better using shift registers. I have 6 situations even like that.

  In addition, by using the DAQ Assistant is really forbidden due to bad results. May be, OR use them to show the clients easy programming. I have a finite acquisition loop for 12 times. Too long, I don't have any problem with the help of data acquisition. But I got a problem when it is in continuous mode (especially when my mode of Highlighted code execution). I changed it to finished now. Is it possible to keep to herself as write like that for an application usable 10 years or better write with DAQmx functions.

  Thank you people.

  shjukheter wrote:

  I have to wait until the 1VI running and I need to pass the output to 2Vi.

  None of the screw that you set call 1. VI or 2.vi. If 2. VI requires a power of 1(vi), it will automatically wait up to 1. VI ended until he could start. It is dependent on the data. No required sequence.

  DBL values will be read without having changed the tunnel entrance of the while loop and then go to the tunnel entrance to the structure of the case. The value of the tunnel will not change for the duration of the subVIs. You only need a registry change if one instance changes the value and you want the changed value in the subsequence of the while loop iterations.

• Execution of Code with the participation of true/false

  OK, so I have to be over thinking on how to do it. I'm trying to run some of my code when I get a value of True. If set to False I don't want it to do anything. Ive tried using a true/false case structure, but the obligation to hang the false case something is screwing me. Also tried a while loop, but it simply snaps and never reads the false after his already on.

  Murielle says:

  Very well and I'll check out the tutorials. I just got stupid all this code because I wanted to take the last element of the array and write them on the worksheet without adding other values, BUT at the same time allow him to add to the file because I'll repeat this code on.

  You don't have a table until make you a right there on a single element. There is no 'another value '. There is an element in the table, which is the first and the last element and exactly the same as the value that you used to build the table. Once you do the tutorials, you'll laugh about your code. It is absolutely useless.

• Structure of case based on a parameter

  Hello world!

  So I was wondering if we could set up a business in a structure of the case, which is based on a parameter.

  So here's what I mean:

  I have a case structure inside a loop for (i = 0,..., N-1). I would like to deal structure for 3 cases: by default, I = 0 and i = N-1.

  The problem is that N can change from time to time. It is not a fixed value.

  Therefore, is it possible to create something that is literally "N - 1"?

  Thanks in advance!

  Valentine

  N °

  But why you couldn't put the N in the equation that determines which cases to run.  You do the calculations and comparisons in the code to the terminal of selector.

• Method of sale and the various stages of sales opportunity?

  Hello
  
  Can we create different method of sale (for example dedicated dealer selling method, method of direct selling) and create different sales stages in each method of selling?
  
  Thanks adavance.
  David

  Santosh, CRM On Demand supports several sales process (garage sales, direct sales, etc.). Go to Admin, then click on rules & assignment of the data, and then click sales process.

• cluster + case help

  Hello

  I'm learning clusters and unbundle by function name using a structure of matter. For some reason, my lead of the cluster is broken and he says the error is of the wrong data type, but I'm multiplication by a scalar, I do not understand why the error occurs and what to do to fix.

  I also have a problem with the structure of the case. So I want the deal structure something if it's false (as shown). But, I won't do anything if the structure of matter is true. How would I you in wiring and setting up the schema for the structure real deal?

  I have attached photos of my diagram of Panel and the front block.

  I hope I was clear in my question, otherwise let me know!

  I appreciate any help! Thank you!

  Hello

  Maybe you're the real part of the deal just by chance; We do not understand what is there, but as you don't mention her errors, we will assume that you have get the syntax right.

  You choose which of the editing by defining the necessary at the top case. The left arrow = previous, right arrow = then arrow down = menu. Wiring on screen change to show the wiring for the selected case.

  So try to select TRUE. Wiring, you will see, this is what happens when the input is TRUE. There is a wire out of the case, you should wire something, maybe a straight in front of the entrance, so you do nothing at the entrance of food out. If you don't wire anything out, you pass the value "default" of this type to the output, or get an error, according to a LabVIEW option setting. The default value of a number is equal to zero.

  Stem

• How can I set default values to set the Mode in the config of the AO?

  Hi, how can I set default values to allocate mode in the config of the AO. To be precise, in the attached vi, I need to set the Mode allocate in the AO Config to ' use FIFO memory (6) ' if the value inside the structure of my case is false and 'no change (0)' if the value inside the strusture case is true.

  Create two constants for Mode allocate input (right click > create > constant). A place in the real case of the structure of the case and place it in the case of false. Their son in the same tunnel (border of the structure of the case), then the tunnel of wire to the pole to allocate the AO Config Mode. I do not have traditional DAQ installed, but who should do it.

• VI of hand stops fucntioning after as I open and close a Subvi to a structrue event.

  Hello

  I try to open a pop up vi of an event. I've been struggling with this for a while now. When I open a pop up vi and close it, the main vi stops correctly.

  I narrowed down it to the fact that the event that reminds the Subvi is never ending when the Subvi is closed.

  The attached picture is an example of what I'm doing. When I run the present, I never see the dialog box indicating "here.

  may be useful as an allusion to the problem...

  This does not work correctly if I run the vi, click to open the Subvi, close the Subvi (here the main vi is not working properly, do not click on anything whatsoever) then stop the main vi, run the main vi has even once, open and close the Subvi and then I see the dialog 'here '. , and my main vi works correctly.

  Thank you

  J

  

  What actually happens, is press you the Ok button and your panel closes and you set the stop 2 true.  OK, it's fine except that the stop Terminal 2 has already been read during this iteration of the loop.  So the loop will go again.  This time, it is read stop 2 to a REAL, but the structure of event needs an event before the loop can fill.  But the façade was already closed and you're stuck.

  As Dennis said, get rid of the 2 stop and just wire the TRUE constant straight out of the case of the event.  Wire a FALSE for all other cases of event.