Samba75 USB Modem GPRS/EDGE cannot connect after installing Vista SP1

Similar Questions

• USB modem broadband does not connect after upgrade to XP Pro

  I use a high modem flow Cricket to connect to the internet, but lost the connection from the upgrade of XP Home, XP Pro. I have a Compaq nx6310. Recently upgraded to Windows XP Professional (ver 5.1, service pack 3) The Cricket Modem plugs into the usb port. Now, I get the error message "a connection to the remote computer could not be established. You may need to change the network settings for this connection. "Received error 720: PPP settings on my computer and on the remote computer do not match. (see screenshot below)

  Firewall is configured correctly to allow the modem in Windows Firewall and my anti-virus program.

  I have determined that it is not the modem because it works correctly on the borrowed laptop.

  I spent several hours on the phone with the internet provider and it was determined that the modem is working properly according to the diagnosis, they talked me through as well. It was at this time tech ISP suggested that I have to contact HP.

  Any comments would be greatly appreciated. Thank you in advance for any ideas or suggestions.

  

  Problem solved after hours even over the phone with Cricket.

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• No audio from built-in speakers after installing Vista SP1 HELP!

  Hello

  I just installed vista service pack 1 on my inspiron 6400, but do get all the sounds from my built-in speakers, the icon in the lower right corner said only: "No Audio output device installed.

  After looking in my device under sound Manager, video and game controllers my "IDT HD Audio CODEC" has a yellow warning triangle and under properties says device cannot start.

  Can someone help me get my sound somehow.

  Thanks Jwhighdown

  
  

• Faulty Windows Update after installing Vista sp1

  I finally got windows vista service pack 1 to install on my computer. After installing, windows update keeps failing when trying to update.

  I get the error code 80246008

  I checked the BITS/Background Intelligent Transfer Service, and he was arrested. It is set as automatic (delayed start). When I try to run it it gives the error 1068: dependency or the group could not start

  Checking dependencies, I found that the COM event system + is thus stopped. It is located in autostart. When I try to start what it gives error 193: 0xc1 and says could not start the system event COM + on the local computer "Windows".

  
  

  I couldn't find anything on the forums which has worked so far

  @umchief only: Riffs on Mike's response, try this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot connect after install

  I just bought a new SSD with the intention of doing a fresh install of Windows on it. I downloaded Windows 8.1 installation directly from Microsoft Media on a USB key. I went through the installation, and it seemed to work perfectly well. However, when I started to install programs, I am essentially impossible to restart the computer. When I do, it attempts to load the login screen, but it is completely empty. I tried to reinstall Windows, and I am able to restart perfectly fine right after it loads everything first... but every time I try to install anything (Windows, Chrome, graphics drivers updates, printing software, etc.) he comes back to the same problem when I restart... screen empty, unable to do anything, much less actually connect. It is the first time that has happened for reinstalling Windows and I am quite lost.

  Hello

  Thanks for posting your query in Microsoft Community.

  I can understand the feeling of not being able to see the machine how it should work and I'll be happy to answer your query. Let me ask you;

  1. What is the brand and model of the computer?
  2. How did you create installation media for Windows 8 (which is the link/URL)?
  3. When you say new facility, do you mean clean install?
  4. Which operating system was installed before Windows 8?

  I suggest you to follow the steps below and check.

  Step 1: Please refer to the following and create the installation media for Windows 8.

  Create an installation media (DVD/USB) for Windows 8

  Note: You should have the product key for Windows 8 to create installation media.

  Step 2: Start to the recovery environment with installation of Windows 8 media

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) click Auto repair of Advanced Options screen.
  (g) following, choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  Step 3: The restore of the system on the Advanced Options screen

  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state.

  You can follow the steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) select System restore.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• L830 satellite - Bluetooth cannot connect after installing Win 7

  I reinstall (Windows 7 Home Premium) on my laptop PSK84V-02400UAR Toshiba Satellite L830, and install all the drivers, but after you install all the drivers, I can't connect any Bluetooth device to this tour...

  When I search using the Bluetooth window it shows in the search window and after a while ' * could not detect the remote device * ' *... Kindly help... awaitng your valuable response.

  Can you please post exactly details how you installed the software and drivers Bluetooth?
  I think that you have made some mistakes there

  Your laptop supports the Atheros WLan card. Right?
  I think that this Atheros WLan card compatible with BT as well. This means that you need to install a special driver that allows to share WLan and BT in a single module.

  This driver calls filter for Atheros Bluetooth driver package.
  Therefore, install the driver Atheros Wlan, Atheros Bluetooth driver filter and battery Toshiba BT package.

  Then BT must be installed correctly and you should be able to activate it in order to start the pairing process.

• Internet connection after installing vista

  I changed the hard drive of my labtop. Then I installed a vista business on my labtop but it can not connect to the internet. I tried this way:

  Control Panel, network and internet, set up a connection or network, connect to the internet.

  But this message: 'Windows doesn't detect any network hardware. "

  Please let me know how this windows vista able to recognize my internet connection which I use through my rotor for other computers. It cannot detect my wireless also. I wasn't expecting such a problem with vista before starting the real work.

  Hello

  Using another computer / laptop go to the website of the manufacturer of your laptop > search for a driver and software download section > key in your laptop model munber > look for the Vista operating system to the correct address > find drivers for it > download and save to a Flash Drive > transfer and install them in this laptop.

  If the manufacturer of the laptop has no Vista driver available for this model of laptop, we can not help you.

  See you soon.

• Satellite A210: taken micro does not work after installing Vista SP1

  After you have installed SP1 for Vista, had a number of problems and the head is a main & mic Sockets is more work in front of the computer.
  So cannot use Skype etc.

  Any help appreceated

  Bill

  Train from my own experience the SP1 is not fully compatible with the various drivers.
  In case you looks that the audio driver does not work with SP1.

  Don t know what sound card you have (maybe Realtek?), but a sound card driver update would be desirable.
  If it doesn t help you will need to wait until it comes out an update of the audio driver

  CU

• problems after installing Vista SP1

  I have Vista 64 Business edition. I managed to install SP1 from a MS DVD.

  The only problem is that after installation I can't get internet connection.

  I'm on broadband with Tiscali/Talk Talk and my connection is cable to router Thomson TG585 v7.

  If I uninstall the update SP1 my internet connection works perfectly.

  Talk Talk were unable to help.

  Thank you very much

  Geoff

  I have Vista 64 Business edition. I managed to install SP1 from a MS DVD.

  The only problem is that after installation I can't get internet connection.

  I'm on broadband with Tiscali/Talk Talk and my connection is cable to router Thomson TG585 v7.

  If I uninstall the update SP1 my internet connection works perfectly.

  Talk Talk were unable to help.

  Thank you very much

  Geoff

  Download the drivers from the hardware manufacturer for the device INSIDE the computer network.

  What is a clean install of Vista or something (why just get installed SP1 - since SP2 came out for years)?

• Satellite P200 - 1FC dies reboot after installing Vista SP1

  As recommended I tried to install the service pack for Vista, but when he tried to restart I got "the installed program cannot start. Click OK to turn off the computer. »

  It will not restart in safemode, or any mode, actually.

  The drive only what i've got is the recovery disk that says that if I use it I lose all my data. Microsoft says 'Toshiba to ask. "

  So, here I am.

  Any ideas?

  If you want to ask Toshiba then you will need to call the support hotline
  This is a user forum and as much as I know there is no people of Toshiba

  So now you deliver what laptop do you have?
  How have you tried to install SP1?

  More details are needed...

• Satellite L40 - 14N is not working after installing Vista SP1

  Greetings

  After Vista with SP1 update, the computer became non functional all the lights blink but not display.
  Any ideas people.

  Concerning

  Hello Mike

  Sorry, but your description of the problem does not say much. Black screen on startup, after wake from sleep mode or hibernation mode?

  Please give us more information.

• Satellite P100 - no sound after installing Vista SP1

  The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

  I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

  I tried to restore to before the time when SP1 was installed.
  I updated the BIOS to the last on the Toshiba site.

  I pulled my hair.

  Someone at - it any other suggestions?

  It s certainly a useful information. Thanks again!

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• After installing Vista, CD/DVD drive cannot be seen or read.

  After installing Vista, CD/DVD drive cannot be seen or read.

  Hi heartmanmd,

  You get the error message?

   

  Run the fixit available in the article below and check if that makes a difference

  
  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.