Sampling frequency of input/output does not match.

Hi all

I recently moved to audacity to audition and I have a small question: I have a Zoom h2n who worked well with Audacity, but when I tried my first recording with audition, I was told that my input and output sample rates do not match. I've already looked around and discovered that I need to change the format of my speakers to match the entrance to 44.1 I my h2n zoom fixed to however I was wondering if there was when even just ignore it. What the output is important in any case, my fault for my speakers is quality studio 24 bit 48000. Did I miss an option in the settings of the hearing? What I really need to drop out of the enclosure to 16 bit, 44100?

Thanks in advance for any help.

Peace.

If you use the Zoom as an interface to audition then you really must match your session, the sampling frequency of the aufdition otherwise interface is going to be on-the-fly resampling

So when you create a new session you assign at the same rate as the Zoom or vice versa

You can also try to edit > Preferences > Audio hardware and check or uncheck the "attempt to force material to document sampling frequency.

Tags: Audition

Similar Questions

  • Satellite A100 keyboard input language does not match the physical keyboard

    I'm sorry.

    In fact, it is the first line:

    & é " ' ( - è _ ç Ã* ) =

    Kind regards

    Leonardo

    I have a laptop SATELLITE A 100 (model PSAARE-02X01TFR) with the french (I think) QWERTY keyboard here and may not know how to configure it under Win XP.

    It has these characters on the top row:

    (The numbers are off)

    The second line has:
    q w e r t y u i o p ^ $

    The third:
    q s d f g h j k l: a¹ *.

    The fourth:
    z x c v b n m; , !

    Any idea what and how I have set up?

    Thank you, Leonardo

    Hello!

    As Akuma, you can change the input language of keyboard in Control Panel. It is very easy and takes only a minute to change.
    Check it!

    If you have any other questions, please let us know! :)

    Good bye

  • Getting the error «for input and output sample rate does not match...» »

    I am trying to create an audio file, but when I click on the record button I get this error:

    «The sampling rate of the audio output devices and audio don't match.» Audio cannot be recorded until this problem is corrected.

    Use the appropriate operating system or control panel of audio device to adjust the sampling frequency of the output devices and audio entries to use the same settings. »

    I have the preferences set to use operating system controls and it seems to work because when I change in the Win 7 Pro CP it adjusts at the hearing.

    So I do not know which need to be addressed. I use the video card as the source and not the speakers thus mean the output must be la carte too?

    Please help, I'm confused.

    Thanks for your time!

    Got an answer to a previous question asking how to record and thought, this could be useful for others.

    rothmannnyc,

    February 18, 2013 16:33 in response to talbot

    It takes a Windows setting and a setting of the hearing.

    You will need to go into your settings from Windows recording devices - if you see a speaker in the lower right of your screen, right-click on it and choose recording devices.  Find your audio input source, select Properties, go to advanced.  You should see a drop down menu with options for the quality and frequency of sampling, mono/stereo.  In general, you'll want to 44.1 kHz for audio; 48 Hz for the video.

    At the hearing, go to Edition/Preferences/Audio Hardware and select the same frequency of sampling for output.  I went through the same question a few months ago, and it worked for me.  Good luck!

  • Error #3606: Sampler 0 format does not match the format of texture.

    Hello

    I try to use a cube texture but I got this error:

    Error #3606: Sampler 0 format does not match the format of texture.

    with this fragment of AGAL:

    ft0.w MOV, FC0 .x

    FT1.xyzw Tex, v0 .xzy, fs0
    Mul ft0.xyz, fc1.xyz, ft1.xyz
    MOV OC.xyzw, ft0.xyzw

    Apparently glsltoagal does not write the < parameters > fs0 is a problem or it has default values?

    Can I create textures to Cube in a specific way?

    I did a mistake using a faulty method, it was

    createCubeTexture

  • Why microsoft used to support fsx insisting on a product code when all I have is the product key that has been authorized for bu activation does not match their input format

    trying to get a simple answer to my question, I asked the support of microsoft for the contact to ask someone who knows about flight simulator but I can't spend the screen requests I have enter product code - I walked into the box of the product id provided key interest which enabled but said stupid site simply enter the code in the indicated format and it does not match this format once again , I can't communicate with them-i suspect that it is a ploy because there is no available support and it's a time of great runaround.last they do not recognize my computer id code - this time, they have recognized my computer but then obscured code fsx - i don't believe that someone will read this-i has recently received a message to say that my thread on an unanswered question them earlier had been removed and I was wondering who decides that - always has to be someone in life at microsoft

    Hello

    Where have you bought Microsoft Flight Simulator X for?

    Follow the steps in this article.


    Solving the problems of activation for Microsoft games and mapping programs

    http://support.Microsoft.com/kb/960480

    Also see this article:

    How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
    http://support.Microsoft.com/kb/973457

    If the problem persists, Flight Simulator supports for assistance.
    http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Elapsed time on graph does not match indicator sound

    Hello

    I created a vi that displays three waveforms on a graph whose axis x shows the time elapsed since the vi was launched. The data is written to an excel spreadsheet. Everything works as expected with the exception that column of time in my file does not match the time that is displayed on the x-axis of my table. The time in my file only shows increments of 0.1 second, with the same sample for every ten samples, so that the time on the graph increases in increments of 0.001 (accuracy I had put in) and is unique for each data point in amplitude. I have attached my output file for reference. The column 'X' is both.

    I am collecting data at 100 Hz and 10 samples of reading both using the continuous sampling mode. Without my loop for the values of x, I get a sample of time on every ten - what I understand why, given my sampling rate; with it, I get this same sample for all ten samples (again, I think I understand why, but foolishly hoped that might solve the problem). What I don't understand is why the time on my table is incrementing differently time data, I wrote to my folder, since both are from the same source. Anyone would be able to help me understand that, if I can try to solve my problem?

    I have also included my vi. I use USB 6229 OEM.

    This is because you write 10 copies of t0 to the worksheet

    Try this little maodification and see if that helps

  • The column that does not match when comparing two records

    Hi all

    We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:

    Table 1

    PK Parent Child Property1 Property2
    1AA1P1PR1
    2BB1P2oraPR2
    3CC1P3SRP

    Table 2

    PK Parent Child Property1 Property2
    1AA1P1PR1
    2BB1P2PR2
    3CC1P3PR4

    In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:

    PK Column_Mismatch
    3Property2 (this must be the name of the column that does not match)

    Appreciate the help.

    Thank you

    Andy

    Hi, Andy.

    Andy1484 wrote:

    Hi all

    We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:

    Table 1

    PK Parent Child Property1 Property2
    1 A A1 P1 PR1
    2 B B1 P2 oraPR2
    3 C C1 P3 PR3

    Table 2

    PK Parent Child Property1 Property2
    1 A A1 P1 PR1
    2 B B1 P2 PR2
    3 C C1 P3 PR4

    In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:

    PK Column_Mismatch
    3 Property2 (this must be the name of the column that does not match)

    Appreciate the help.

    Thank you

    Andy

    Why you don't want no matter what exit for pk = 2?  Property2 does not correspond either to pk.

    What happens if the 2 columns (or more) do not match?  The following query would produce a list delimited, such as ' parents; PROPERTY2 '.

    WITH got_mismatch AS

    (

    SELECT pk

    , CASE WHEN t1.parent <> t2.parent THEN '; PARENT' END

    || CASE WHEN t1.child <> t2.child THEN '; CHILD ' END

    || CASE WHEN t1.properry1 <> t2.property1 THEN '; PROPERTY1 ' END

    || CASE WHEN t1.properry2 <> t2.property2 THEN '; PROPERTY2 ' END

    AS the offset

    FROM table_1 t1

    JOIN table_2 t2 ON t2.pk = t1.pk

    )

    SELECT pk

    , SUBSTR (incompatibility, 3) AS column_mismatch

    OF got_mismatch

    WHERE mismatch IS NOT NULL

    ;

    If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

    The query above does not count NULL values as inadequate.  If you want that, the same basic approach will work, but you can use DECODE instead of <> to compare columns.

    What happens if a pk exist in a table, but not the other?  You want an outer join, where I used an inner join above.

  • specification does not match any newspaper archive in the recovery catalog

    RMAN > delete archivelog until time = ' sysdate-15';

    output channel: ORA_DISK_1
    output channel: ORA_DISK_2
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid = 151 devtype = DISK
    allocated channel: ORA_DISK_2
    channel ORA_DISK_2: sid = 143 devtype = DISK
    specification does not match any newspaper archive in the recovery catalog


    Database 10.2.0.3.0 on win2008 (VMWARE)
    Thank you

    Honey says:
    RMAN > delete archivelog until time = ' sysdate-15';

    output channel: ORA_DISK_1
    output channel: ORA_DISK_2
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid = 151 devtype = DISK
    allocated channel: ORA_DISK_2
    channel ORA_DISK_2: sid = 143 devtype = DISK
    specification does not match any newspaper archive in the recovery catalog

    Database 10.2.0.3.0 on win2008 (VMWARE)
    Thank you

    There is no archived redo log file corressponding your query. There is no archived for 15 days ago redo log file

  • My home page does not match your Firefox 4 illustration; I'm a newbe.

    I've been a user of the internet explore v.8 before moving to firefox 4. I'm still on Windows XP Professional, which is been check for all updates. I am a new user with firefox and try to learn the system through your tutorials and examples.

    My homepage does not match your illustration of Firefox 4 No firefox tab such as, but the old - file, publishing, display, history, Favorites, tools and help tab, for example.

    Do I have to re - load firefox 4, fix something in Explorer 8, install a patch?

    Thank you for your time.

    The Firefox button which replaced the Menu bar is enabled by default in Vista and Windows 7.

    To turn off the Menu bar and turn on the Firefox button, the "Menu bar" option must be deselected (unchecked = Firefox button, off; checked Menu Bar = Menu bar on, Firefox off button). To do this, do one of the following:

    • Using the menu bar, click View > toolbars > Menu bar
    • Using the Firefox button, click on the Firefox button > Options > Menu bar
    • HOLD down the ALT key while typing the keyboard letters VTM to alternate power
  • Won't boot Equium A200 - checksum does not match

    Hi all

    When I boot from the HARD disk, I get the message the file is possibly corrupt.
    The file header checksum does not match the checksum calculated.

    If I use the resettlement drive, the same problem.

    Any help, greatly appreciated.

    Hello

    Check the HARD drive please!

    Maybe HARD drive failure that I recommend the use of the tool called Drive Fitness Test.
    It s freeware and you can download this from several different pages
    The tool creates a bootable CD that you can use to run diagnostics tests!

    Welcome them

  • Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

    I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

    But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

    The dialog box is like this:

    [Stop using iCloud?]

    Create separate password for (name of the admin account)

    -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

    iCloud password: __________

    New password: __________

    Check: _

    Index of password: __________

    [Use the separate password?]

    Not sure why that is, that the password does not when it's supposed to be the new s password?

    Also, I would like to know what to put in the box check?

    Help much appreciated!

    Thank you

    Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

  • External USB HDD cable does not match of Satellite A200 USB ports

    I bought a new Notebook from Toshiba A200 Satellite and a 500 GB Maxtor One Touch 4 500 GB hard drive.
    The end of the USB cable to the HARD drive does not match one of the ports on the Toshiba.

    Can I get an adapter, or try to find a rope?
    HARD drive uses USB 1.1, 2.0 or Firewire port.

    Thank you!

    What?

    Sorry, but I don't believe that.
    The Satellite A200 supports USB 2.0 ports Commons and it should be possible to connect a normal USB cable to the laptop!

    Are you sure you are using the right cable to 100%?

    It should looks like this:

    [USB 2.0 cable | http://upload.wikimedia.org/wikipedia/commons/e/e6/USB_TypeA_Plug.JPG]

    and these are typical USB ports:

    [USB 2.0 port | http://upload.wikimedia.org/wikipedia/en/8/84/USB_Connector.jpg]

  • Content on the laptop does not match content on ipod

    Content on the laptop does not match content on ipod

    Content on the laptop does not match content on the ipod.

    How do you load the content on the iPod?  Manually (do drag and drop items on the iPod in iTunes), or automatically (set up screen settings of music from iPod in iTunes)?

    What content isn't is?  Unless your iTunes library is small enough to fit on the iPod completely, it is normal for the content on the laptop to not game content on the iPod.

  • Size of the hard drive does not match, what to do?

    End of 2012, the MacBook Pro 13 "

    I've added everything I installed and registered on my macbook and it does not match the size of my disk info...
    I just deleted all the documents that I need to see what will happen with the size of the disk and it says: drive for 'other' size is 85GB and

    Audio = 0
    Film = 0
    Photo = 0
    Programs = 0
    Security Copies = 0
    Other = 85,17 GB

    And the strange thing is that I have 10 + adobe programs installed (that doesn't add anywhere near 85 GB!)
    But the weird thing ', it is also that it shows 0GB to programs/software that I obviously have a lot of programs/software installed. WHAAAT...

    It's really annoying

    It seems as if increases the amount of data in 'other' counts for

    Is there someone out there in the world of the internet, who knows how to fix this?

    I tried to read a previous debate about this, but to be honest, I do not understand...
    I'm not exactly a macbook-computer-expert when it comes to knowledge like that

    I would be grateful for your help!

    It is in Danish, but... Yes

    LYD Sound/Audio =
    Film = film
    Photo = Photo
    Progr. = Programs
    Sik.Kopier = security Copies
    Agent = other

  • When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

    When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

    Example of

    Stair machine 550 K/CAL

    Apple Watch 30 k/cal

    Hello

    During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

    More information: use of the application of the workout on your Apple Watch - Apple Support

Maybe you are looking for

  • 3rd generation of Apple tv.

    Hello. I have trouble with my apple TV, I, m trying to connect on iTunes store with my code. I m typing the right username and password, but the result is: can not log... Tried to reset, and I deleted the Apple TV on my devices... advice?

  • Display Z470 problems

    Hi I have an Ideapad Z470 weeks and started doing a few scratches on the screen as interference, to only when it was used with the battery, but is now both plugged in or on battery use. It's worse when I move the screen, the screen become white with

  • We add a wireless "router sub" or to our current router Linksys router cascading

    Hello Add a router under or a router cascade to our current Linksys router because when we have people at the meetings, we do not want our regular wireless accessible by all.  We look at the HD Video Pro EA6500.  Do we need to buy a bridge?  No matte

  • Repaint issue with vertical field Manager.

    Hi all I have a verticalfieldmanager in which I am dynamic addition of different fields. I created a chat screen where, inside, I have a custom textfield and the VFM containing fields, being added dynamically. By default, focusing on optimization of

  • BlackBerry Smartphones not receive certain emails

    My Pearl 8130 does not receive certain emails and receive others.  I get all my texts and phone calls.  I tried to use crackberry.com to e-mail some ringtones for my Blackberry, but they don't come through.  Emails are to appear on my computer very w