Samsung j3: service plugin

Similar Questions

• HP Deskjet Ink Advantage 3545: Unable to download 'HP Print Service Plugin' in my new Samsung rating 4

  I understand that I must download the "HP Print Service Plugin' to allow my new Samsung rating 4 empty wireless printing. I tried several times to download the app, but each time to fail with the following message ""HP Print Service Plugin "could not be downloaded due to an error (495)."  The app is not compatible with the phone?  If Yes, are there any other application / collaborative I can print empty my new phone Samsung Note 4?  The specs of the device: Adroid version 5.0.1.

  Your help is greatly appreciated.

  Thank you

  Hello

  Have you tried to do a few more space in your Android device.

  Try to move all the pic/app on the memory card and then try to new downloadning plugin for printing from HP.

• HP service plugin - A5-sized paper

  Based on the advice of erico, I can connect my officejet hp 6700 to my nexus 7. However, when I try to print a word with an A5 page layout document, it only print on 50% of a page A5. I tried all size available on the plugin page (4 x 6 inches, 5x7inch, A4, etc. and still not get the print out properly.)

  Can the service plugin HP manages printing the document in A5 format?

  Hello

  A5 is not a paper size supported for the Android version of HP in printing solution, as you can find listed under the what printing options are available with an integrated HP for Android printing solution? section below:

  •Size: you can print on the Letter, A4 paper, 4 x 6 in., 5 x 7 in. or 10 x 5 cm.

  http://support.HP.com/us-en/document/c03679829

  Try HP ePrint mobile app and check if this can provide you A5 print, see print from a mobile device is more limited however:

  http://support.HP.com/us-en/document/c01616126

  Shlomi

• HP service plugin - nexus 7

  Hi all

  I had a nexus 7 (android 4.4.2) with hp service plugin pre-installed. I had a wifi hp officejet 6700 printer connected via wifi.

  I had a word (.doc) document in QuickOffice. I click the button print in QuickOffice and he has shown the Sub screen (link below), except that all the elements (copies, paper size) and the 'Print' button is grayed out that does not allow me to change or clicked.

  http://www.androidcentral.com/sites/androidcentral.com/files/styles/w680h550/public/postimages/684/p...

  Anyone know what I need to do? Do I need to download the software 'HP e-print "? (I thought in 4.4.2 Android, hp itself service module should be enough to run wifi printing.

  Thank you very much in advance,

  Kelvin

  The application of HP printing service. Return to the Google game store and reinstallHP app Printing Service again. It should work.

  If it isn't, the HP ePrint app can be the only option that is currently available, which will work with your device.

  I use the print application all-in-one for my HP Slate Pro 8 product loan.

• Service plugin for WebWorks 2.0.0.54 pressure (Cordova 3.2)

  Hello! I'm trying to use the plugin Service Push in my application. I've added the plugin through the command line and verified that the com.blackberry.push file was infact in my plugins folder in my project. I ran the app on my phone, and the Web Inspector gives the following error:

  TypeError: 'undefined' is not an object (evaluation of "window.webworks.defineReadOnlyField")

  This error appears when the plugin tries to define the constants to push as SUCCESS or INVALID_PPG_SUBSCRIBER_STATE, so obviously the plugin never started working and I can't use the push service.

  I have my references Push fine (they work fine in my 7 OS application), and I was very careful when I wrote the config.xml file. Here it is:

  
  "xmlns ="http://www.w3.org/ns/widgets "
  ' xmlns:CDV ='http://cordova.apache.org/ns/1.0 ' version '0.0.1' = >
  Sample
  www.Apache.org/licenses/license-2.0"/ >
  http://www.something.com "> something"
  

  subdomains of http://www.mypushserver.com/Registro_Portalesv4/modules/Register"="true">

  
  
  
  Example of
  
  
  
  
  
  
  
  *
  access_shared
  post_notification
  _sys_use_consumer_push
  read_device_identifying_information
  access_pimdomain_messages
  bbm_connect
  run_when_backgrounded
  
  
  APPLICATION
  
  bb.action.PUSH
  application/vnd.push
  
  
  
  
  
  APPLICATION
  
  bb.action.OPEN
  text/plain
  
  
  

   

  
  What I've noticed, is that the 'window.webworks.defineReadOnlyField' function is at the webworks - 1.0.4.11.js file which I included in my project because I use cordova.js as the new suggested SDK. I think maybe the push plugin is not updated to the new SDK or I'm missing something more.

  Any ideas? Thanks in advance

  * I put a space the tags to avoid having a smiley display in the post, so it is easier to read. In my project, there is no space between the ":" and the 'p '.

  Hello

  An update was just pushed to the registration of Cordoba which should solve this problem.

  http://plugins.Cordova.IO/#/com.BlackBerry.push

• Officejet J6480 carriage jams when printing wirelessly via the plugin from HP printing service

  I try to print on my printer OfficeJet J6480 HP all-in-one to my Samsung Galaxy Tab 3 tablet that runs Android 4.4 Wireless using the "HP Print Service Plugin on the tablet.

  Measures already taken;

  Sucessfully downloaded/installed the Service HP Print on shelf Plugin

  Radio wireless to the printer and correctly configured to communicate with the router wirelessly activated successfully.

  Problem:

  When you try to print something from the tablet to the wireless printer, the printer is trying to perform the print operation (flow paper in the printer from paper tray, shows 'Printing' on the printer screen), but then never made a real impression and gets a 'Transport Jam' indication on the printer screen.

  When this occurs above, I opened the hood top, checked for jammed paper in the paper path (Nothing), did tension of printer many times, cycle of fact alignments cleanings and cartridge many times, changed the paper to different types of paper.

  None of these actions corrected the problem...

  I'll also add that when you perform the steps of printing with the radio wireless on off the printer and the cable connected to the printer, the printer functions normally when you print from my pc applications - no traffic jams. Also, the printer works normally when you perform a function 'copy' locally from the printer control panel - not roadways of jams.

  I thought maybe an update of the firmware to the printer could solve this problem - ideas about this being a likely solution?

  BTW - how you normally clear / would correct a cart-jam regardless of printing wirelessly or through an ethernet cable?

  If the firmware update is not a solution, any comment on what could be the cause of the problem?

  If an update is available, could you tell me how to do the upgrade and where can I download it from?

  Thanks for all your comments... Denny

  E - rog,

  Two things I wanted to first of all thank you a lot for the response to my original message concerning the problem of printing wirelessly to my printer HP J6480 of the Tablet, Samsung Galaxy Tab 3 via the Plugin of Service HP Print.

  Secondly, I wanted to aplogize for the very long delay in responding to your... I had some health problems with a family member who prevented me to try your suggestions to the problem.

  I am pleased to report that I managed to solve the problem... I am now able to print to the printer of the tablet.

  A little history on the fix...

  I tried to download and install the update of the firmware from the link you provided, while having the printer connected to the PC (Windows) computer via a USB connection, as you suggest. (It was initially connected through my home network, so I had to first uninstall, then reinstall via USB connection). When you try to install the downloaded firmware it failed, even after several attempts to re-downloading/reinstalling.

  Instead, I uninstalled the printer again, reinstalled over the home network, downloaded the update of the firmware directly from the HP site by locating the printer model, then the firmware. This time the firmware successfully installed (was able to view the progress of installation of the firmware in the display on the front panel of the printer). Make the installation of the firmware with the printer installed on the network domestic (instead fo via USB), the installation process allowed me to search for the printer on the network - it found it successfully and successfully installed the firmware.

  After this successful firmware installation and turn on the wireless radio on the printer (via the button on the front panel), I was able to print successfully from the tablet... YES!

  Needless to say, there is no carriage jam messages as before... and I did not try your other suggestions to go to the HP article on carriage jam error States/solutions.

  I am really gratefull for your response/suggestions...fixing this problem did the usefulness of my tablet to increase dramatically to have the ability to print... cudos to you for your efforts on this forum and a big "thumbs up" for your records.

  Denny

• Plugin of HP Printing Service

  I am located in India.

  Our Android app must support printing from the application and to do this we use 4.4 Android devices.

  We do not want to launch and print from application anther unless its really the only way to do it.

  We will also use the HP Printing Service Plugin - https://play.google.com/store/apps/details?id=com.hp.android.printservice

  Our client plans to buy HP LaserJet Pro 400 (CF278A) M401dn / M401dw (CF285A) printer.

  This printer supports printing via the plugin service? If this isn't the case, then what printer should be used?

  Kind regards

  Salil.

  Hello

  HP Print service plugin is supported by this printer.

  http://support.HP.com/us-en/document/c03722645

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.

  Make it easier for others to find solutions,

  marking my response with "Accept as Solution" if it solves

• HPDeskJet 1010: my Office 1010 jet will work with the app plugin from HP printing service

  HP service plugin app work

  Hello

  I'm mainly a guy of printers, but have you tried a different monitor on the computer?

  You excluded the cord, so it's either the screen itself, or the graphics card in the computer.

  If the monitor works on another computer, its probably the graphics card.

  If it isn't, something could happen on the screen.

  I will try to post this question to the computers Board.

• Samsung Galaxy Tab 10.1 ePrint

  Just bought an hp deskjet printer - can print wireless from my PC effortlessly. Impression I tried my Tablet - get the message: can print only for Samsung printer.  My printer and the pc and the Tablet are all connected to the same wifi network we have at home. What can I do to be able to print wireless from my Tablet?

  Hi, what model Deskjet do you have?

  All joy with the HP Print Service Plugin?

  http://WWW8.HP.com/us/en/ads/mobility/overview.html?JumpID=va_r11400_eprint

  

  Thanks, Ciara

• DeskJet 3050 has J611Series: HP Print service is disabled - how to activate it?

  I'm trying to print from my Samsung Galaxy Tab S, SM-T805. Under settings: connectionsprinting, I see the HP Print Service Plugin is turned off, and by clicking on the icon displays a screen that tells me that the service is disabled. There's no obvious way to turn it on.

  When I followed a link on the same screen to download an app playstore, HP Print Service Plugin box is there, with a beat in a box to the right of the btm, but when I open it, I just see the uninstall option - not install or update, so I guess that the version I have is the latest. I actually uninstall, then reinstall, but no change.

  So, how can I activate it? WiFi is turned on, the printer is offline.

  In Applications, I select the plugin that shows the version 2.8 - 1.5.0 - 10F - 16.1.16 - 71.  Apparently, there is no button to activate it.

  If I understand well there is not a core function, and I do not wish to use the cloud at all.

  Looking for one suggests this is not an unusual problem, but I have not found a solution so far.

  Any ideas please?

  @silverman166, I'm just looking at your post and hoping that I might be able to help!

  I'm working on a Samsung Galaxy S5, Android 5.0 Lollipop so I hope that you will be able to follow the screenshots.

  As you have already mentioned you downloaded service of HP Print plugin via Google game store, so all the options at my disposal should be the same for you.

  (1) in the settings for 'Print' in the section scroll to connect and share

  (2) select the printing to HP Service Plugin

  (3) in the upper right corner, drag the glider to the right to activate the plugin.

  4) press OK

  (5) your HP Print Plugin should now be enabled.

  

  Hope this helps you activate the Plugin HP!

  M.

• Samsung HP 1513: Impression of Samsung Android on HP deskjet 1513

  Greetings,

  I would like to print directly from my Samsung Galaxy Core first on an hp deskjet printer 1513, via a usb cable.

  I installed the printer HP of Playstore soft.

  I turned on the app and it did not find my printer. All that says is "Search for printers" for hours.

  Is it possible to print from my smart phone to this printer via a usb cable?

  Thanks, Frank

  Hello Tor2,

  To print via USB cable, you need an OTG adapter to connect the USB cable.

  The captive print app for Android is the HP Print Service Plugin - Android applications on Google game

  But according to the documentation, your printer is not supported in Android devices.

  Mobile Printing Solutions compatible with HP printers

  So printing via USB from an android phone won't work.

• Samsung Note 4: Cannot print to my HPJ4680 to my new phone Galaxy Note 4

  As suggested, I downloaded the App tp my rating 4 ePrint and tried printing on my HP J4680 all-in-One.  Blurtooth is turned on the printer but the print app still says "cannot find the printer.

  I also got an activation code and activate ePrint, but still it does not find my printer.  Is there a setting to the printer to make it "discoverable"?  Do I need to enter the address of my printer?   Help!

  I found some instructions to register for my printer, but I don't have the menu items to get a claim code.  This means my printer is not really capable of wireless communication?

  Hello

  To clarify, the HP Officejet J4680 take on a wireless connection.

  The printer is not supported for the HP ePrint software, but it is supported by the "printing solution for Android and Kindlel devices" as below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series---N9/4322914/model/4323658/document/c03722645/

  You can connect the printer to your wireless network, and then install the Plugin from HP shop game of Google Print Service.

  https://play.Google.com/store/apps/details?ID=com.HP.Android.printservice

  Make sure it is ebabled as follows:
  -On a home screen, tap applications (located at the bottom right)
  -Tap on settings.
  -From the SYSTEM section, press print.
  -Ensure that the HP Print Service Plugin is enabled

  Then print as shown below:

  1. From a support application (for example, Photos, Chrome, etc.), find the option print in the menu of the application and then click on print.

• Error: your Netscape browser is not "Microsoft® Windows Media Services" plug-ins

  I am running windows vista Home premium sp2 windows media player 11 and I'm playing my music from the old computer I had, that I saved on an external drive and I'll have this "error: your Netscape browser is not"Microsoft® Windows Media Services"plug-ins installed.»
  What could I do to fix it help please thanks in advance and GOD BLESS YOU ALL

  Hello

  1. what browser do you use?

  You can try to use Internet Explorer as the default browser and see if it helps.

  You can also check the following links of wire and see if it helps:

  Error: your Netscape browser is not "Microsoft® Windows Media Services" plugins installed.

  Netscape browser to the Microsoft windows media services plug-ins to allow the download of license to play music

  Hope this information is useful.

• Play music using vista, need to MS windows Media Services to install, plug in where is it?

  Vista I want to play some of my music I copied from the CD that I have purchased., I was informed that "a license is required to play this file." I press 'Download license' and then it comes up with the statement - next
  Error: your Netscape browser is not "Microsoft® Windows Media Services" plugins installed.
  That point me in the right direction - where is this plugin - obviously I need to install it. Why Vista came not with it? strange and a waste of time. Please give the directions/help. Thank you.

  Hi Christine B1B2,.

  What browser do you use to download the licenses?

  In the meantime, if you are using a third-party browser, you can try to set Internet Explorer as default browser and check if the problem is resolved.

  You can view discussions in the link below.
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/2eae60f2-45b8-482B-B749-e40bb079e78f

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• BMP is a failure during the installation of plugins.

  I was able to build without any problems, and then all of a sudden my build has begun to fail. This time, I had this error but if I remove this plugin it's just errors on the next person who is contacts. The calendar plugin is a third party, but the contacts is not. I also tried specifying the CLI version 6.1.0 because with this same config file, I've been able to build without problems, 3 days ago that doesn't work anymore. Thanks for the help!

  * GENERATION FAILED *.

  Orders for next generation failed:

  CompileC build/Coordinate.build/Release-iphoneos/Coordinate.build/Objects-normal/armv7/Calendar.o Coordinate/Plugins/nl.x-services.plugins.calendar/Calendar.m normal armv7 objective-c com.apple.compilers.llvm.clang.1_0.compiler

  (1 failure)

  Ensure that you are not sourcing from the PhoneGap Build repository plugins. Use instead of the MUSEUM. Note that you may need to determine the new plugin ID because they changed to "org.apache.etc." for "cordova-plugin-etc."

  If this does not help, please share your config.xml file so that we can see if there is nothing obviously wrong (omit credentials / secret keys you do not want the world to know)