Samsung kies does not open, just the icon in the taskbar
Kies will be opened in the bar tasks, but usually open from there
Hello
· What exactly happens when you try to open Kies?
· You get the error message?
· If it works well before?
· Were there a recent change on your computer before the show?
Method 1:
Uninstall Kies and re-install and see if it helps.
Uninstall or change a program:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Method 2:
If you always fall on the issue, put the computer in a clean boot state and then try reinstalling the Kies and check if it opens.
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.
Tags: Windows
Similar Questions
-
My sound icon blackBerry smartphones does not open on the touch screen?
My sound icon does not open on the touch screen? All other applications open? I locked it somehow? Help, please! : )
Begin by a traction battery, if you have not already. With your phone, remove the battery and then replace it.
I hope that helps you.
-
I downloaded and installed 6 Lightroom. The icon is on my desk, but it does not open. The old version is still also, and it works as usual. How can I fix it.
Hey Alian,
Please try to follow the steps in the article.
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
Kind regards
Sumit Singh
-
my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!
You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.
Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.
Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.
Step 1
VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.
Step 2
When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:
/Library/LaunchDaemons
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.
There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.
Step 3
In the LaunchDaemons folder, there may be one or more files with the name of this form:
com Apple.something.plist
When something is a random string, without the letters, different in each case.
Note that the name consists of four words separated by dots. Typical examples are:
com Apple.builins.plist
com Apple.cereng.plist
com Apple.nysgar.plist
There may be one or more items with a name of the form:
com.something.plist
Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.
These names consist of three words separated by dots. Typical examples are:
com.semifasciaUpd.plist
com.ubuiling.plist
Sometimes there are items (usually not more than one) with the name of this form:
com.something .net - preferences.plist
This name consists of four words (the third hyphen) separated by periods. Typical example:
com.jangly .net - preferences.plist
Drag all items in the basket. You may be prompted for administrator login password.
Restart the computer and empty the trash.
Examples of legitimate files located in the same folder:
com.apple.FinalCutServer.fcsvr_ldsd.plist
com Apple.Installer.osmessagetracing.plist
com Apple.Qmaster.qmasterd.plist
com Apple.aelwriter.plist
com Apple.SERVERD.plist
com Tether.plist
The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.
Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.
If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.
If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.
Step 4
Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select
▹ Safari preferences... ▹ General
and click on
Set on the current Page
If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.
The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.
Step 5
The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.
Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.
Step 6
This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.
-
CD drive does not open and the light does not work
original title: single CD player problem
The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.
My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.
When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D". It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.
I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.
WTFFF ideas? I really hope that its not the motherboard
There are two cables you need to connect to the drive, one for data and one for power. You must connect both training at work. If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.
"Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *
Sorry, im just of knowledge about computer hardware. you say that I should try a different agreement or another port to plug in?
I tried to connect on a couple different SATA ports on the motherboard.
-
I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:
Firefox Pei
"C:\Program Files (x 86) \Mozilla" PEINothing happens with every order.
I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "
If you have any ideas, I had appreaciate that your expertise!
Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers. -
Installed FF 16, 17, 18. Does not open in the normal administrator account, or with "Run as Administrator" but will be in SafeMode to W7. Changed the permissions (normal connection had to do in Mode without failure of W7, would not allow (connected as an administrator) can not delete the files from Mozilla in normal connection.) On rare occasions, with a fresh install, I could get it to open once, then not again. Searched the reg any mention of Mozilla or FF and cleaned. Tried FF safe mode, no luck. Check permissions after appropriators and multiplication of the rights of full ownership of all the files of FF, several reboots, no luck. Chrome, IE and SeaMonkey work very well. Using a fairly new installation of W7 Professional 64 bit on a Dell Optiplex 990 i7, 16 GB of ram. Had the same problem with another user on the same box. No problem on other computers without other problems in program.
Finally have it running. Seems that the enterprise version of McAfee is blocking the installation of the program. McAfee uninstalled, reinstalled Firefox, installed McAfee and now, it's good to go.
-
Skype is running in the background, but does not open on the screen
Skype is running in the background, but does not open on the screen
Uninstall ArcSoft software. This application adds a filter cell of webcam and is originally Skype crashing.
Stack: \Driver\,ArcSoftKsUFilter, \Driver\ksthunk,\Driver\usbvideo,\Driver\usbccgp
-
This happens if I click on a file or a file that is already open. The opened file will blink in the taskbar, but does not open on the top of any page is currently on the screen. When I click on previously open programs bring them on top as usual. Open another windows word file in the start menu did not appear at the top of the page currently open also. Any ideas on how to solve this problem?
This happened after one of the three things - the upgrade of windows components, the advanced upgrade system of care or following a computer crash that preceded the front mentioned updates but I'm not sure that one.Thanks in advanceHello
I suggest you to check the question in the new user account.
How to create and configure user accounts in Windows XP
-
whenever I click on a program, that it does not open and the 'open with' screen appears
whenever I click on a program, that it does not open and the 'open with' screen appears
Hello
Use above message for intense and thorough check for malware.
To restore the ability to run any .exe programs.
1 make a Restore Point so that you can come back if necessary back although probably not required.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
Click on it and FUSION - REBOOTDO NOT COPY THE LINES
-----------------------------------------------------------------Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\. [EXE]
@= "exefile".
"Content Type"="application/x-msdownload".[HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
@= "{098f2470-bae0-11cd-b579-08002b30bfeb}".[HKEY_CLASSES_ROOT\exefile]
@= "Application".
"EditFlags" = hex: 38, 07, 00, 00
"FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\DefaultIcon]
@="%1"[HKEY_CLASSES_ROOT\exefile\shell]
[HKEY_CLASSES_ROOT\exefile\shell\open]
"EditFlags" = hex: 00, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\shell\open\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shell\runas]
[HKEY_CLASSES_ROOT\exefile\shell\runas\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shellex]
[HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
@= "{86C86720-42A0-1069-A2E8-08002B30309D}".[- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]
--------------------------------------------------------------
DO NOT COPY THE LINESIf necessary:
Check the fix of exe here
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.htmlAlso check this one if it applies
http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.htmlHow to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlI hope this helps.
-
ENcypted file does not open and the key file is lost.
Hello
Does not open my encrypted file and the key is lost. I did it in windows 7 and my system crashed. I then restoed operating system, then my encrypted file does not open and the key file is on the same partition and also, he was gone. It of a personal record and is very important and punch. I tried to take possession of the file and that did not work I was wondering if there is a tool or method which can decrypt the file. I know that their around the key file, or if there is a way to get the certificate... Please help. Thank you for your help and answers.
If your certificate and key are lost or damaged and you do not have a backup, you will not be able to use the files that you have encrypted.
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-lose-your-file-encryption-key
"What to do if you lose your file encryption key.http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-an-encrypted-file-if-I-am-denied-access
"How to open an encrypted file if I am seen refuse access?"Cordially,
-
Internet Explorer does not open in the metro interface
My IE does not open in the metro interface. This is my default browser & I disabled all add-ons. What can I do now?
Hi Wendy,.
I understand that you can access the modern user, Internet Explorer interface, but desktop Internet Explorer works fine. To better understand the question, please answer the following questions:
(1) what exactly happens when you try to open Internet Explorer to the modern user interface?
(2) has received no message/error code?
(3) what are the changes to the system prior to the question?
(4) you are able to access other applications for the splash screen?(5) you are able to launch the desktop Internet explore?Method: Please delete the following registry key
Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
(a) go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_DLLs
(b) delete the value: (C:\PROGRA~2\WI3C8A~1\Datamngr\datamngr.dll C:\PROGRA~2\WI3C8A~1\Datamngr\x64\IEBHO.dll)
(c) reboot and retry launch browser IE10 Immersive
Important: Serious problems can occur if you modify the registry incorrectly. For added protection, back up the registry before you edit it.
Back up the registry:Hope it solves the problem, if you have other questions about Windows, feel free to post.
-
Photoshop does not open all the files on my Imac it will open work and recent files very well but will not save. I have the latest version. What is "cleanmymac3" that prevents the loading of files?
I must add that when I try and open a file, it freezes and I have to force photoshop completely.
Try resetting your Photoshop preferences.
-
I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code
update by downloading the files directly and then apply them:
pre cc updates: http://www.adobe.com/downloads/updates/
CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
-
I tried everything I know to uninstall the new version of Firefox. I also installed Aurora beta and it had the same behavior, and I managed to uninstall that. I can't open a browser ff to work on it with the help of a large part of your support information. I click the icon, but it does not start on the desktop but the clock running as Task Manager. I have to end task in Task Manager to close it. I can not uninstall and tried the system restore, but this also does not work due to another problem with my antivirus program.
If this is on a Windows computer, see this link from Microsoft;
The problems that the programs cannot be installed or uninstalled
Maybe you are looking for
-
When opening Firefox, two windows are open
A week ago Firefox opens two windows (my home page and a new empty window) when I open the program. This also occurs if the Web site I'm open a new window (the window for the site) and a new window empty. Until this started, Firefox ran perfectly. An
-
HP Pavilion f232nd 17: HP Pavilion 17-f232nd password administrator + OS problem
Hey guys,. I had some problems with my HP laptop and tried to reinstall Windows with a USB key. I started in the advanced options of windows, went in CMD and beginning of installation from there, deleted the partitions and then installed Windows, as
-
17 - g052ng: update of the card Wifi on 17-g052ng
Hello I have this laptop and I would like to upgrade to use a Wifi ac card 2 x 2. In the manual, I can see that this series is also comes with ac in option being the Intel card http://h10032.www1.hp.com/ctg/Manual/c04655126 (pdf, page 10) 3160 then i
-
How can I make my active number it is said that it is not active
It is said it is not active, how make it active again?
-
Label "VI this ' hide by default
Hello How can I customize my LabVIEW so when I drop the VI reference server in the menu or the rapid decline, to have the label is not visible by default. In most cases, the constant itself shows the label of the referenced object. Thank you!