Samsung phone drivers installed it said... but when I plug in the phone it does nothing

Similar Questions

• Hi im doing a fresh install of xp, but when I get to the product id it says invalid

  Hi im doing a fresh install of xp, but when I get to the product id it says invalid... However I followed the steps to find the product key on the disk, I lost the sticker. any reason why this product key is not working? the hard drive is formatted and Ive tried several times now more double and triple check numbers etc, but still without success... dosent make any sence why he does not accept the product key, the computer is not connected to the internet (dose it have to be?) Please help

  Not enough information, Andrew.

  If you used a CD with a retail version of XP Home (you never did say what type of XP you had!) and if you carelessly lost the COA with the product key if you use magic Jellybean Finder or Belarc Advisor and if you faithfully transcribed the key and if you used the correct installation of new and correctly typed in the key CD (be careful not to confuse a) 8 with a B or a S with a 5, etc.), this method will not work.

  But we do not know the brand and model of your PC. We do not know what method the manufacturer provided to return the PC to its original state. We do not know which method you have elected to use to perform the installation of "fresh".

  In addition, it is impossible to find the product key on the disk (unless it's something like an OEM CD mark Dell that contains a golden master key, which of course cannot be used on a Dell PC!).

  As far as we know is you formatted the hard drive. So, even in the cases where you were, at some point, installed a version valid retail XP home and really lost the COA/product key and otherwise might have found the key to product using the SDM or Belarc, erase you the key when you formatted the drive!

  If you have purchased the commercial version and still have the receipt (proof of purchase), read this page:

  http://support.Microsoft.com/kb/326246

• My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Error 80070020

  windows update

  My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Get an Error 80070020, I am unable to find out exactly what to do. Every day for a few weeks he tries to install the updates and then stops to install but always ends up coming back. Can you help me please?

  Hello

  read thisL

  Windows Update Error 80070020

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  and also see if this helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• LR CC has just been installed but when I click on the desktop icon that nothing happens, what can I try?

  LR CC has just been installed but when I click on the desktop icon that nothing happens, what can I try?

  This desktop icon may be for an older version.

  This link explains the options to launch applications CC:

  https://helpx.Adobe.com/creative-cloud/help/launch-creative-cloud-apps.html

  Guinot

• I can't send an attachment from my email whice is an overview, but when I click on the attachment it does not bring the browser window

  When I click on the attachments it does not have a window to be able to navigate to my files

  Hello

  You also have another question in these Forums on your e-mail problems.

  They can be connected:

  Here is a link to your other question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/when-i-try-to-send-an-email-i-get-this-msg-the/a8333fe9-cda8-49bc-A4E7-f8756a3086fc

  See you soon.

• My queue says there 1 document sitting in it, but when you look at the queue there is nothing there

  I can not print anything because the print queue think there is something stuck in there, but there isn't. The small printer icon appears at the bottom of my screen showing the existence of an item in the print queue. When you actually open the print queue to the top, there's nothing there. I tried to stop the printer spooler and restart it but that has not worked. I use a HP Photosmart C5180 series. If anyone has any ideas how to help me I would appreciate it a lot. Thank you

  Hi Julie,.

  The operating system you have installed on the computer?

  See the articles:

  Unable to print? Print jobs are stuck in the print queue

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02205477

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: Please select the operating system in the right corner and solve the problem.

  Let us know if you have other questions about Windows in the future.

• I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  I installed G10-ebook but when open it and write down the username and password it starts and stops immediately and closes what should I do?

  Hello

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Windows update says it was installed successfully, but when you look at the list of the installed update it doesn't see the

  ORIGINAL TITLE: problem of update of Windows vista edition Home premium

  I just bought a laptop Toshiba of ebay, in excellent condition, the operating system is windows vista Home premium and the system is X 86 based. I have no trouble getting security updates or anyothers with the exception of SP1. When I do a windows update installation, it is said it was installed successfully, but when you look at the list update installed, it doesn't stand and she also works not highlighted on the sys.info page. I have already run the windows update fix the tool several times, but it doesn't solve the problem. Also update keeps telling me to install the SP1 package. I think that the number on the pack is KB96330 (not sure but I'll check in a few minuets when I go home for lunch). What should I do to get SP1 + 2 installed?

  .. .he had appeared as if it was handed to the way in which it left the factory.

  Looks can be deceiving, especially for what it is bought on eBay.

  [If you bought used shorts Jockey on eBay, would you wear them before you had washed in water hot & bleach?]  I hope not! ]

  See the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If you need additional help with the new installation, you can start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• Disappearing Windows Apps but when I go to the store they always see the installed

  When I arrived at the store of Windows apps I had on my tablet installed show but they do not appear on my screen of applications all or my splash screen.  When I hit install it goes through the motions but does not appear in place of ELISA.  Don't know what happened, but it's quite frustrating

  Thanks for the reply.  This number is different from come just released.  If I go to all the apps apps that were once on my Tablet do not show, and when I search my tablet also does not show.  But when I go to the store they show as installed on my surface.  There is a Setup button I hit and it seems to go through the motions well with no errors but then when I go to all the applications that I tried to download is not found.

  I thought that if I could find them I could delete and then reinstall after but I can't find them anywhere on my surface.

  Well, I came across the answer.  somehow my user profile folder has changed to hidden.  I noticed that he was not and changed the properties and the boom that the missing applications are returned.

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• I paid for the CC photography package ($ 9.99 / month) but when I go in my interface it does give me the option to download photoshop and lightroom. He said just buy now and trying to make me pay all over again.

  I paid for the CC photography package ($ 9.99 / month) but when I go in my interface it does give me the option to download photoshop and lightroom. He said just buy now and trying to make me pay all over again.

  Hello

  Make sure that you are connected to ID Adobe Correct.

  For more information, please visit:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  Hope this helps!

• Ive been using Premiere Pro, After Effects and Photoshop for a while now with creative cloud, but since I've updated the 2015 After effects version, it is said that it is a trail version? But when I go on the creative menu cloud and look at apps it j

  Ive been using Premiere Pro, After Effects and Photoshop for a while now with creative cloud, but since I've updated the 2015 After effects version, it is said that it is a trail version? But when I go on the creative menu cloud and look at apps it just said up to date, any ideas on this?

  Hello Cam,

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation I choose English as my tongue so have no idea what's going on

  After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation, I choose English as my tongue so have no idea what's going on here. Any experience with this? I used the same dvd that when I initially installed so should have come out as done original installation in ' English.

  Hi rebrad999,

  Please see the following KB doc on this topic: error 'incompatibility of language between the entered serial number and language of launch Acrobat | Windows

  If the problem persists, I recommend you to uninstall acrobat and reinstall it after you download it from the following link: download Acrobat products | Standard, Pro | DC, XI, X

  Kind regards

  Rahul