Samsung S6 connects to the router but no internet

When I switched to xfinity I bought a C6300. I had problems with the first not allowing my NAS to connect so I exchanged against another. My phone would connect to the router and work fine for awhile then lose Internet connectivity. The only way to get it back is to reboot the router. I tried several different units, and I am now on a C3700. The problem still exists and seems to be deteriorating. All of the suggestions.

I solved my problem by replacing the Netgear with a Zoom. It was the only one that I could find who said it would work with Android. I hope that Netgear will get things straightened.

Tags: Netgear

Similar Questions

  • WIFI connects to the router but no internet connection on 15R 3521

    Hi, the new laptop 3521 with Win7 Pro the WLAN will connect to the selected wireless router but is unable to establish an internet connection.

    WLan Driver 1703 was duly installed once the Chipset driver was installed, as recommended.

    Fortunately, other mobile devices to connect to the same router. Ubuntu on this laptop was also happy to connect to internet on WIFI, only Win7 fails.

    Disabled the Win7 firewall, but no change. This connection, unidentified in the network and sharing Center.   Router SSID etc have been entered correctly. Remove the WLAN profile and not reinstated, no change.

    Tried to connect to another router wireless with the same result. I can only run this laptop on wired connection to the router.

    I am at a loss as to what other steps I could take to correct this key WLan / internet access.

    Any suggestions would be welcome. See you soon.

    Hi love,

    Thanks for your advice. I deleted the profiles (two identical found!), also removed all entries of all WiFi routers in Win 7 registry. This step has not resolved the problem.

    However, I found the reason for the connection problem and the solution is the following:

    In the wireless connected (TP-Link) router, wireless--> channel settings is set to 'AUTO' (which is to select automatically 20 MHz or 40 MHz).

    In the device driver Dell WLAN 1703 (properties--> advanced--> bandwidth 802.11 n, the value has been set on (ie the Atheros is the default!))  "20 MHz.

    Once I put the option value "20 MHz / 40 MHz Auto", the connection comes to life.

    What a relief!

    The question is now completely resolved. Thank you to all who have contributed.

    Better with respect to Dzsino.

  • New Samsung UHTV connects to the router, but does not access Internet

    My new UHTV Samsung detects the private network (router) OK, but the TV does not connect to the Internet.

    All other devices (PC, radio) I can access the Internet through the router without problems.

    Before I read too many books, can someone point me in the right direction?

    ElaineM,

    I tried everything in the book - without success; so finally, I reset and reconfigured the router.

    He now works as usual, and I hope it will stay like that.

    Thanks for you patience and support.

    Björn

  • Connect to the router but no internet.

    I use windows xp and netgear wireless router.till yesterday I browse the internet.from today morning, I'm not in a position to communicate the internet.but it will connect to the linksys router not internet.i can ping default gateway.but, that I can't browse the firewall disabled net.i. What is the problem?

    Hello

    1. what exactly happens when you try to connect to the Internet?

    2. you get any error message?

    I suggest you to follow the steps from the link below and check if it helps.

    Method 1 : in the Windows wireless network connection problems:
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2: Try to run fix it from the link below:

    http://support.Microsoft.com/kb/811259

    Hope this information is useful.

  • WiFi is connected to the router, but "no internet access?

    Hi I have a Samsung r519 laptop with windows 7. I am connected to my routerbut I can not always connect to the internet. I think that the problem can be on an ip address, dns or parameter setting of the server. My ipv4 settins are set to 'use ip address of followig' and 'use the followig dns servers. My ipv6 settings are set to automatic. I would like to know if you want pictures of my computer screen. Help, please.

    Hello

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    Did you do any hardware or software changes to your computer recently?

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the network troubleshooter
    Reference:
    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    If this does not help, then use method 2.

    Method 2:
    For the DNS server, follow these steps.

    a. Click Start. Type cmd in the search box and press ENTER.

    b. in the command prompt window, type the following command and press ENTER:

    ipconfig/flushdns

    Note: There is a space between ipconfig and /.

    It will show you the message successfully empty the cache of DNS resolution.

    c. again once, in the command prompt window, type the following command and press ENTER.

    ipconfig/registerdns

    d. type the following command at the command prompt and press ENTER.

    ipconfig/all

    The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

    If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

    If this is the case, try this:

    a. type ipconfig enough at the command prompt and press ENTER.

    b. then, type ipconfig / renew in command prompt and press ENTER.

    The test again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

    Then, if the problem persists, use method 3.

    Method 3:
    Please use the suggestions contained in this Microsoft support article and check the issue.
    Reference:
    How to reset TCP/IP using the NetShell utility
    http://support.Microsoft.com/kb/299357

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • I can connect to the router but no internet connect windows 8

    I took each of boredom that my NEW HP envy provides however I still get a no internet connect error.  If I reset my router and checked that it is acceptable.  I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!

    Hello

    Check with HP Support, their online documentation and drivers, diagnostics,
    and ask questions in the forums about known problems.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ===============================================

    Note the use of Win Key + X and Win Key + W (to access control panel, run,
    and settings according to needs). Win + D key calls to the office and use
    Win Key activates / deactivates the desktop and start screen.

    --------------------------------------------------------------

    Control Panel - Network and sharing Center - solve problems

    References to Vista also apply to Windows 7 and Windows 8.

    Your router be guess here, you have successfully updated the firmware a possible
    solution? And I would update your WiFi drivers on computers. How far away are they
    you have set in the router? Are there obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click
    top - tab of the driver - write version - click on update driver (can't do
    nothing that MS is far behind the certification of drivers). Then right click on the Wifi
    Device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
    This section-> update the NIC driver).
    http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

    Drivers and Microsoft - Windows 8 - Hardware
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Microsoft - Windows 8 - why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Microsoft - Windows 8 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system Maker you can see the same device manufacturer
    more recent versions. (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other update
    Drivers Windows 8 like updated drivers.

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - set up a new connection or network

    -----------------------------------------------------

    And:

    TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
    http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

    Microsoft - Windows 8 - Web & Networking
    http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

    Microsoft - Windows 8 - Wi - Fi & Networking
    http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

    -----------------------------------------------------

    Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

    Microsoft - Windows 8 - wired and wireless in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Acer Aspire one laptop has full connection to the router but no internet, wii is router connected work properly__

    under the heading of ipconfig/all says media disconnected and NO active dhcp, LAN will work wireless connected but NO internet

    Hi jmoraski8,

    Try these steps and check the result.
    Step 1: Dynamic Host Configuration Protocol (DHCP) lease renewal
    a. Click Start, click Run, type cmd and click ok.
    b. at the command prompt, type ipconfig / renew
    c. Close command prompt.
    d. check the result.

    Step 2: Check obtain an IP address automatically
    a. open Internet Explorer, go to tools > Internet Options > connections > LAN settings > uncheck all boxes except "automatically detect connection settings.
    b. click ok to apply the changes.
    c. check to see if the problem persists.

    Step 3: If the problem persists, repair network connections
    a. see the repair network connections
    b. check if the problem persists.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Win7 64 bit, connects to the router, but no error internet access-"page not found".

    Original title: Win7 64 bit, connects to the router but no internet access.

    Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

    Hello

    1. Have you made changes on the computer before this problem?
    2. What antivirus application do you use?

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

    http://support.Microsoft.com/kb/929135

    Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

    Method 2:

    I would suggest trying the following steps and check the status of the question.

    a. open Internet explorer.

    b. click on tools, then on Internet options.

    c. click on the Connections tab.

    d. click on LAN settings.

    e. uncheck the option use a proxy server for your LAN .

    f. save the changes by clicking on apply and ok.

    Method 3:

    Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

    a. on the Tools menu, click Internet Options.
     
    b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

    c. close Internet Explorer.

    d. restart Internet explorer and check the status of the issue.

  • my laptop connects to the router but said validation of identity and remains in this mode

    using windows XP my laptop connects to the router but I preserve identity validating is... can help you?

    This probably means that your WiFi has become misconfigured.

    • Open network connections (start > run > ncpa.cpl > OK)
    • Right-click on your wireless adapter icon and select "Properties".
    • Click the "Wireless Networks" tab.
    • In the list of "Preferred networks", select the entry that corresponds to your router, click 'properties '.
    • Click on the tab "authentication."  At this point, you should see a screen like this
    • Uncheck the box at the top that says: "authentication Enable IEEE 802. 1 x for this network. "
    • OK your way out.
  • Connects to the router, but cannot send or receive data

    I have a WRT54G.  I can find the network and connect to the router, but I can't send or receive data.  I tried to connect directly to the router and I still not able to send or receive data. Both computers on the router has the same problem.  I did a reset the router back to the settings by default and still no luck.  Any thoughts?  Thanks in advance for the help.

    The first thing you can try is when you the Modem and the router is connected to the other, disconnect the power from the router and Modem, wait 30 seconds and then plug in the power to the Modem and once all the lights are solid, then connect the power supply to the Linksys router, now check if you are able to go online. If still no then...

    Who is your ISP. So I think you need to re - configure all settings of your router again.

    If your Internet Service is cable follow this link

    If your Internet Service is DSL follow this link

  • Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

    Original title: connection problem

    Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

    I suggest you to consult the steps described in the article:

    Method 1:

    You can try the steps in the link and check.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    You can update the driver of windows 7 on the manufacturer's Web site.

    Method 2:


    You can remove and re-create the wireless network connection, follow these steps:

    a. Click Start, type ncpa.cpl , and then press on Enter.
    b. right click on your wireless network connection and then click Properties.
    c. click the wireless networks tab.
    d. under preferred networks, click your Wireless
    network and then click on remove. e. click on view Wireless networks.
    f. under management of the network, click refresh the network list.
    g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.

    Method 3:
     

    If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

    a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

    b. right click on network adapters and click Uninstall and restart the computer.

    c. after rebooting, install network cards and check with the question.


    Method 4:

    You can temporarily disable the antivirus and firewall on the computer and see if it helps:
    Enable or disable Windows Firewall
    NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
    You can see the following link to disable the Antivirus installed on your computer software.
     
    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.
  • HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

    I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

    Hey @miriamnimmo,

    Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

    Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

    Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

    See you soon!

  • Laptop HP G70 connection to the router but not the internet

    I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

    It will connect to the internet ethernet of nis.

    My laptop connects fine with other networks if it is not wireless.

    All other devices are connected to the router.

    Please help this is extremely frustrating.

    You are the very welcome.

    I compressed the file and downloaded on my Skydrive account, which I shared the link below.

    Download, unzip and run the file called sp54972.

    https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

  • WRT120N Wireless laptop connected to the router, but does not connect to internet

    I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.

    If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.

    I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.

  • Windows 7 Dell computer laptop connects to the router, but the internet connection is spotty/slow

    I recently installed a new Comcast wireless gateway, which includes a built-in router.  My Ipod and Ipad work perfectly with this new router connection.  My Dell laptop, however, connects to the router without a problem, but it surfing the internet very slowly and sometimes can't access it at all.  The router connection remains strong during these periods of power failure, however.  I don't get online no problem when I connect directly to the router/modem with an Ethernet cable.  Network troubleshooting does not detect a problem, I have released/updated my IP address, and made sure I had updated drivers.  The issue still [persists.  Any input on what to try next?

    Hello Scot,

    Thanks for posting your question in the Microsoft Community forums.

    The description of the problem, I see that the Internet connection is very slow on the computer.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    Maybe there's a chance that some network settings, start services application or a third party or a security software restricted it to connect properly and is responsible for the internet connection is slow.

    I suggest you to follow the steps below and see if it helps.

    Method 1

    I suggest you try the procedure described in the following Microsoft Article and check if it helps.

    Internet Explorer is slow? 5 things to try
    http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Method 2

    If the problem persists, I suggest you to follow the steps described in the following Microsoft tutorial and see if it helps.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

    Method 3

    If after performing more high question method persist, try to perform the clean boot and temporarily disable security software and then check the speed of the Internet.

    Step 1: Perform the clean boot

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

    Step 2: Temporarily disable security software.

    Disable the antivirus 

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

    Method 4

    Since then, the issue is not resolved by disabling the security software, Windows Firewall could be the next possibility. So, I suggest, temporarily, disable the Windows Firewall and check if the problem persists.

    Refer to the following steps:

    1. Press the Windows key + R, type firewall.cpl , and press ENTER.
    2. Click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click turn off (not recommended) Windows Firewall under each network location that you want to stop trying to protect, and then click OK.

    Caution:

    You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. You must reactivate as soon as you have completed troubleshooting.

    For more details, you can see the article mentioned below.

    Enable or disable Windows Firewall

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

Maybe you are looking for

  • dry low real every30 drop for world of warcraft 2 sec durnig frame rate

    I have a new computer, a desk top I have win7 home 64Here is my infoOperating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)Language: English (regional setting: English)System manufacturer: MICRO-STAR INTERNATION

  • What are the Common Files/Microsoft Shared/DOA?

    What are the "CommonFiles/MicrosoftShared/DOA?    And where can I find them?

  • Password reset help?

    A few things to know: I have NOT forgotten my password.  However, this morning when I went to log on to Windows Vista HP, it decided to deny me and tell me that my password was incorrect.  I spent hours today reading messages other people on command

  • where is the restrctn thng nber br0cen

    cat sitting 0n need Romaine 2 10cate nber 10 c 1abt0b he1b!

  • API 5, "interlace synchronization.

    I wrote a complex application that executes a browserfield2 as a layout engine and overload of links with various native functions, but I'm quite often an error JVM "interlaced synchronization. Any ideas? My code: _bf2 = new BrowserField(); _controll